Tissue Engineering Auricular Cartilage: A Review of Auricular Cartilage Characteristics and Current Techniques for Auricular Reconstruction.

Microtia and anotia are congenital auricular anomalies that negatively impact the psychosocial development of those affected. Because auricular cartilage is a type of elastic cartilage that lacks regenerative capacity, any notable defect in its structure requires a surgical approach to reconstructing the auricle. While there are several reconstructive options available between alloplastic and prosthetic implants, autologous rib cartilage grafts remain the most commonly used treatment modality. Still, this widely used technique is accompanied by significant patient discomfort in a young child and carries additional risks secondary to the traumatic process of rib cartilage extraction, such as pneumothorax and chest wall deformities, and the final esthetic results may not be ideal. To circumvent these limitations, tissue engineering approaches have been used to create a realistic-looking ear that mirrors the complex anatomy of the normal ear. This article reviews the biochemical and biomechanical properties of human auricular cartilage as they relate to design criteria. In addition, a variety of cell sources, biocompatible scaffolds, scaffold-free techniques, and mechanical and biological stimuli are discussed. This review aims to identify knowledge gaps in the literature related to auricular cartilage characteristics and make recommendations to drive the field of auricular tissue engineering.

Human nasal cartilage: Functional properties and structure-function relationships for the development of tissue engineering design criteria.

Nose reconstruction often requires scarce cartilage grafts. Nasal cartilage properties must be determined to serve as design criteria for engineering grafts. Thus, mechanical and biochemical properties were obtained in multiple locations of human nasal septum, upper lateral cartilage (ULC), and lower lateral cartilage (LLC). Within each region, no statistical differences among locations were detected, but anisotropy at some septum locations was noted. In the LLC, the tensile modulus and ultimate tensile strength (UTS) in the inferior-superior direction were statistically greater than in the anterior-posterior direction. Cartilage from all regions exhibited hyperelasticity in tension, but regions varied in degree of hyalinicity (i.e., Col II:Col I ratio). The septum contained the most collagen II and least collagen I and III, making it more hyaline than the ULC and LLC. The septum had a greater aggregate modulus, UTS, and lower total collagen/wet weight (Col/WW) than the ULC and LLC. The ULC had greater tensile modulus, DNA/WW, and lower glycosaminoglycan/WW than the septum and LLC. The ULC had a greater pyridinoline/Col than the septum. Histological staining suggested the presence of chondrons in all regions. In the ULC and LLC, tensile modulus correlated with total collagen content, while aggregate modulus correlated with pyridinoline content and weakly with pentosidine content. However, future studies should be performed to validate these proposed structure-function relationships. This study of human nasal cartilage provides 1) crucial design criteria for nasal cartilage tissue engineering efforts, 2) quantification of major and minor collagen subtypes and crosslinks, and 3) structure-function relationships. Surprisingly, the large mechanical properties found, particularly in the septum, suggests that nasal cartilage may experience higher-than-expected mechanical loads. STATEMENT OF SIGNIFICANCE: While tissue engineering holds promise to generate much-needed cartilage grafts for nasal reconstruction, little is known about nasal cartilage from an engineering perspective. In this study, the mechanical and biochemical properties of the septum, upper lateral cartilage (ULC), and lower lateral cartilage (LLC) were evaluated using cartilage-specific methods. For the first time in this tissue, all major and minor collagens and collagen crosslinks were measured, demonstrating that the septum was more hyaline than the ULC and LLC. Additionally, new structure-function relationships in the ULC and LLC were identified. This study greatly expands upon the quantitative understanding of human nasal cartilage and provides crucial engineering design criteria for much-needed nasal cartilage tissue engineering efforts.

Mechanical Evaluation of Commercially Available Fibrin Sealants for Cartilage Repair.

OBJECTIVE: Fibrin sealants are routinely used for intra-articular surgical fixation of cartilage fragments and implants. However, the mechanical properties of fibrin sealants in the context of cartilage repair are unknown. The purpose of this study was to characterize the adhesive and frictional properties of fibrin sealants using an ex vivo model. DESIGN: Native bovine cartilage-bone composites were assembled with a single application of Tisseel or Vistaseal. Composites were tested in tension and lap shear. In addition, the coefficient of friction (COF) was measured in a native cartilage annulus model alone and with minced cartilage. Finally, the effect of a double application of fibrin sealant was evaluated. RESULTS: There were no significant differences in tensile modulus, ultimate tensile strength (UTS), shear modulus, or ultimate shear strength (USS) between the 2 fibrin sealants. Both fibrin sealants demonstrated a UTS and USS of <8 and <30 kPa, respectively. There were no differences in COF between the sealants when tested alone or with minced cartilage. A double application of fibrin sealant did not alter the mechanical properties compared with a single application of fibrin sealant. CONCLUSIONS: Fibrin sealant adhesive properties are not affected by the sealant type studied or the number of applications in a bovine cartilage-bone model. Fibrin sealant tribological properties are not affected by sealant type or the addition of minced cartilage. The adhesive properties of Tisseel and Vistaseal were less than those desired for the in vivo fixation of cartilage repair implants. These findings motivate the development of an improved cartilage-specific adhesive for cartilage repair applications.

The Longer-Term Effects of a Single Bupivacaine Exposure on the Mechanical Properties of Native Cartilage Explants.

OBJECTIVE: The purpose of this study was to determine the in vitro effects of a single exposure of bupivacaine on the mechanical properties of bovine cartilage explants at 3 weeks. DESIGN: Femoral condyle articular cartilage explants were aseptically harvested from juvenile bovine stifle joints before being exposed to chondrogenic medium containing 0.50% (wt/vol) bupivacaine, 0.25% (wt/vol) bupivacaine, or no medication (control) for 1 hour. Explants were then washed and maintained in culture in vitro for 3 weeks before testing. Cell viability, tensile and compressive mechanical properties, histological properties, and biochemical properties were then assessed. RESULTS: Explants exhibited a dose-dependent decrease in mean tensile Young's modulus with increasing bupivacaine concentration (9.86 MPa in the controls, 6.48 MPa in the 0.25% bupivacaine group [P = 0.048], and 4.72 MPa in the 0.50% bupivacaine group [P = 0.005]). Consistent with these results, collagen content and collagen crosslinking decreased with bupivacaine exposure as measured by mass spectrometry. Compressive properties of the explants were unaffected by bupivacaine exposure. Explants also exhibited a trend toward dose-dependent decreases in viability (51.2% for the controls, 47.3% for the 0.25% bupivacaine-exposed group, and 37.0% for the 0.50% bupivacaine-exposed group [P = 0.072]). CONCLUSIONS: Three weeks after 1-hour bupivacaine exposure, the tensile properties of bovine cartilage explants were significantly decreased, while the compressive properties remained unaffected. These decreases in tensile properties corresponded with reductions in collagen content and crosslinking of collagen fibers. Physicians should be judicious regarding the intra-articular administration of bupivacaine in native joints.

Mechanical Evaluation of Salvage Fixation Techniques for a Lateralized Fibular Tunnel in Posterolateral Corner Reconstruction of the Knee.

Background: Posterolateral corner (PLC) reconstruction of the knee involves precise drilling of a single tunnel from anterolateral to posteromedial in the fibular head (FH) to ensure adequate graft fixation. Misplacement of the tunnel in a too lateral or too superior trajectory can lead to cortical breach and inadequate graft fixation. Purpose: To (1) determine the mechanical consequence of a lateralized FH tunnel in PLC reconstruction and (2) compare the mechanical strength of 3 salvage fixation techniques for a lateralized FH tunnel. Study Design: Controlled laboratory study. Methods: Sawbones models of a uniform density were utilized. FH tunnels (7-mm diameter) were drilled from anterolateral to posteromedial in positive controls (lateral cortex thickness, 7.6 ± 0.7 mm) to represent an improperly placed FH tunnel at risk of lateral cortical breach. For negative controls and salvage experimental groups, FH tunnels were drilled from anterolateral to posterolateral (lateral cortex thickness, 2.7 ± 0.9 mm). Three salvage fixation techniques were compared: suture anchor fixation, tunnel redrilling, and nitinol staple fixation. Samples (n = 5 per group) underwent uniaxial tension testing, and the ultimate tensile strength (UTS) and mode of failure were recorded. Data were analyzed using the 1-sample t test and nonparametric 1-sample Wilcoxon signed-rank test. Results: The negative control group had a 4-fold lower mean UTS relative to the positive control group (1.49 ± 0.17 vs 6.25 ± 1.98 MPa; P < .01) and exhibited failure through the lateral cortex and tunnel. Nitinol staple fixation improved the mean UTS by >16 times compared with the negative control group (24.06 ± 6.49 vs 1.49 ± 0.17 MPa; P < .01). Suture anchors and tunnel redrilling exhibited similar UTS and mode of failure to those of negative controls. Conclusion: Reinforcement of a thinned lateral FH cortex with a single nitinol staple improved graft fixation strength in a sawbones model. Clinical Relevance: A lateralized FH tunnel can be a common intraoperative pitfall during PLC reconstruction. Salvage of a thinned lateral FH cortex with a single nitinol staple may reduce the risk of cortical breach and graft failure.

Engineering large, anatomically shaped osteochondral constructs with robust interfacial shear properties.

Despite the prevalence of large (>5 cm2) articular cartilage defects involving underlying bone, current tissue-engineered therapies only address small defects. Tissue-engineered, anatomically shaped, native-like implants may address the need for off-the-shelf, tissue-repairing therapies for large cartilage lesions. This study fabricated an osteochondral construct of translationally relevant geometry with robust functional properties. Scaffold-free, self-assembled neocartilage served as the chondral phase, and porous hydroxyapatite served as the osseous phase of the osteochondral constructs. Constructs in the shape and size of an ovine femoral condyle (31 × 14 mm) were assembled at day 4 (early) or day 10 (late) of neocartilage maturation. Early osteochondral assembly increased the interfacial interdigitation depth by 244%, interdigitation frequency by 438%, interfacial shear modulus by 243-fold, and ultimate interfacial shear strength by 4.9-fold, compared to late assembly. Toward the development of a bioprosthesis for the repair of cartilage lesions encompassing up to an entire condylar surface, this study generated a large, anatomically shaped osteochondral construct with robust interfacial mechanical properties and native-like neocartilage interdigitation.

In Vitro Effects of Bupivacaine on the Viability and Mechanics of Native and Engineered Cartilage Grafts.

BACKGROUND: Although the toxic effects of bupivacaine on chondrocyte monolayer culture have been well described, its cellular and mechanical effects on native and engineered articular cartilage remain unclear. For the repair of articular cartilage defects, fresh autologous and allogenic cartilage grafts are commonly used, and engineered cell-based therapies are emerging. The outcome of grafting therapies aimed at repairing damaged cartilage relies largely on maintaining proper viability and mechanical suitability of the donor tissues. PURPOSE: To investigate the in vitro effects of single bupivacaine exposure on the viability and mechanics of 2 cartilage graft types: native articular cartilage and engineered neocartilage. STUDY DESIGN: Controlled laboratory study. METHODS: Articular cartilage explants were harvested from the bovine stifle femoral condyles, and neocartilage constructs were engineered from bovine stifle chondrocytes using the self-assembling process, a scaffold-free approach to engineer cartilage tissue. Both explants and neocartilage were exposed to chondrogenic medium containing a clinically applicable bolus of 0.5%, 0.25%, or 0% (control) bupivacaine for 1 hour, followed by fresh medium wash and exchange. Cell viability and matrix content (collagen and glycosaminoglycan) were assessed at t = 24 hours after treatment, and compressive mechanical properties were assessed with creep indentation testing at t = 5 to 6 days after treatment. RESULTS: Single bupivacaine exposure was chondrotoxic in both explants and neocartilage, with 0.5% bupivacaine causing a significant decrease in chondrocyte viability compared with the control condition (55.0% ± 13.4% vs 71.9% ± 13.5%; P < .001). Bupivacaine had no significant effect on matrix content for either tissue type. There was significant weakening of the mechanical properties in the neocartilage when treated with 0.5% bupivacaine compared with control, with decreased aggregate modulus (415.8 ± 155.1 vs 660.3 ± 145.8 kPa; P = .003), decreased shear modulus (143.2 ± 14.0 vs 266.5 ± 89.2 kPa; P = .002), and increased permeability (14.7 ± 8.1 vs 6.6 ± 1.7 × 10-15 m4/Ns; P = .009). Bupivacaine exposure did not have a significant effect on the mechanical properties of native cartilage explants. CONCLUSION: Single bupivacaine exposure resulted in significant chondrotoxicity in native explants and neocartilage and significant weakening of mechanical properties of neocartilage. The presence of abundant extracellular matrix does not appear to confer any additional resistance to the toxic effects of bupivacaine. CLINICAL RELEVANCE: Clinicians should be judicious regarding the use of intra-articular bupivacaine in the setting of articular cartilage repair.

Diagnostic Arthroscopy of the Minipig Stifle (Knee) for Translational Large Animal Research.

To gain regulatory approval for the clinical use of knee biologics and devices in humans, translational large-animal studies are typically required. Animal models that permit second-look arthroscopy are valuable because they allow for longitudinal assessment of the treated tissue without needing to sacrifice the animal. The minipig is an ideal preclinical animal model for the investigation of therapies for the knee, in part because arthroscopy can be performed in its stifle (knee) joint with the use of standard surgical equipment used in humans. The purpose of this Technical Note is to describe a reproducible technique for diagnostic arthroscopy of the minipig stifle (knee) joint.

Rejuvenation of extensively passaged human chondrocytes to engineer functional articular cartilage.

Human articular chondrocytes (hACs) are scarce and lose their chondrogenic potential during monolayer passaging, impeding their therapeutic use. This study investigated (a) the translatability of conservative chondrogenic passaging and aggregate rejuvenation on restoring chondrogenic properties of hACs passaged up to P9; and (b) the efficacy of a combined treatment of transforming growth factor-beta 1 (TGF-ß1) (T), chondroitinase-ABC (C), and lysyl oxidase-like 2 (L), collectively termed TCL, on engineering functional human neocartilage via the self-assembling process, as a function of passage number up to P11. Here, we show that aggregate rejuvenation enhanced glycosaminoglycan (GAG) content and type II collagen staining at all passages and yielded human neocartilage with chondrogenic phenotype present up to P7. Addition of TCL extended the chondrogenic phenotype to P11 and significantly enhanced GAG content and type II collagen staining at all passages. Human neocartilage derived from high passages, treated with TCL, displayed mechanical properties that were on par with or greater than those derived from low passages. Conservative chondrogenic passaging and aggregate rejuvenation may be a viable new strategy (a) to address the perennial problem of chondrocyte scarcity and (b) to successfully rejuvenate the chondrogenic phenotype of extensively passaged cells (up to P11). Furthermore, tissue engineering human neocartilage via self-assembly in conjunction with TCL treatment advances the clinical use of extensively passaged human chondrocytes for cartilage repair.

Adult Dermal Stem Cells for Scaffold-Free Cartilage Tissue Engineering: Exploration of Strategies.

Dermis-isolated adult stem (DIAS) cells, abundantly available, are attractive for regenerative medicine. Strategies have been devised to isolate and to chondroinduce DIAS cells from various animals. This study aimed to characterize DIAS cells from human abdominal skin (human dermis-isolated adult stem [hDIAS] cells) and to compare and to refine various chondroinduction regimens to form functional neocartilage constructs. The stemness of hDIAS cells was verified (Phase I), three chondroinduction pretreatments were compared (Phase II), and, from these, one regimen was carried forward for refinement in Phase III for improving the mechanical properties of hDIAS cell-derived constructs. Multilineage differentiation and mesenchymal stem cell markers were observed. Among various chondroinduction pretreatments, the nodule formation pretreatment yielded constructs at least 72% larger in diameter, with higher glycosaminoglycan (GAG) content by 44%, compared with other pretreatments. Furthermore, it was found that culturing cells on nontissue culture-treated surfaces yielded constructs (1) on par with constructs derived from aggrecan-coated surfaces and (2) with superior mechanical properties than constructs derived from cells cultured on tissue culture-treated surfaces. After the nodule formation pretreatment, combined supplementation of TGF-ß1, IGF-I, and fetal bovine serum significantly enhanced aggregate modulus and shear modulus by 75% and 69%, respectively, over the supplementation by TGF-ß1 alone. In summary, human skin-derived DIAS cells are responsive to chondroinduction for forming neocartilage. Furthermore, the mechanical properties of the resultant human constructs can be improved by treatments shown to be efficacious in animal models. Advances made toward tissue-engineering cartilage using animal cells were shown to be applicable to hDIAS cells for cartilage repair and regeneration.

Bacterial communities associated with cell phones and shoes.

BACKGROUND: Every human being carries with them a collection of microbes, a collection that is likely both unique to that person, but also dynamic as a result of significant flux with the surrounding environment. The interaction of the human microbiome (i.e., the microbes that are found directly in contact with a person in places such as the gut, mouth, and skin) and the microbiome of accessory objects (e.g., shoes, clothing, phones, jewelry) is of potential interest to both epidemiology and the developing field of microbial forensics. Therefore, the microbiome of personal accessories are of interest because they serve as both a microbial source and sink for an individual, they may provide information about the microbial exposure experienced by an individual, and they can be sampled non-invasively. FINDINGS: We report here a large-scale study of the microbiome found on cell phones and shoes. Cell phones serve as a potential source and sink for skin and oral microbiome, while shoes can act as sampling devices for microbial environmental experience. Using 16S rRNA gene sequencing, we characterized the microbiome of thousands of paired sets of cell phones and shoes from individuals at sporting events, museums, and other venues around the United States. CONCLUSIONS: We place this data in the context of previous studies and demonstrate that the microbiome of phones and shoes are different. This difference is driven largely by the presence of "environmental" taxa (taxa from groups that tend to be found in places like soil) on shoes and human-associated taxa (taxa from groups that are abundant in the human microbiome) on phones. This large dataset also contains many novel taxa, highlighting the fact that much of microbial diversity remains uncharacterized, even on commonplace objects.

Surgical and tissue engineering strategies for articular cartilage and meniscus repair.

Injuries to articular cartilage and menisci can lead to cartilage degeneration that ultimately results in arthritis. Different forms of arthritis affect ~50 million people in the USA alone, and it is therefore crucial to identify methods that will halt or slow the progression to arthritis, starting with the initiating events of cartilage and meniscus defects. The surgical approaches in current use have a limited capacity for tissue regeneration and yield only short-term relief of symptoms. Tissue engineering approaches are emerging as alternatives to current surgical methods for cartilage and meniscus repair. Several cell-based and tissue-engineered products are currently in clinical trials for cartilage lesions and meniscal tears, opening new avenues for cartilage and meniscus regeneration. This Review provides a summary of surgical techniques, including tissue-engineered products, that are currently in clinical use, as well as a discussion of state-of-the-art tissue engineering strategies and technologies that are being developed for use in articular cartilage and meniscus repair and regeneration. The obstacles to clinical translation of these strategies are also included to inform the development of innovative tissue engineering approaches.

Structure-function relationships of fetal ovine articular cartilage.

It is crucial that the properties of engineered neocartilage match healthy native cartilage to promote the functional restoration of damaged cartilage. To accurately assess the quality of neocartilage and the degree of biomimicry achieved, its properties must be evaluated against native cartilage and tissue from which the cells for neocartilage formation were sourced. Fetal ovine cartilage is a promising and translationally relevant cell source with which to engineer neocartilage, yet, it is largely non-characterized. The influence of biomechanics during cartilage development, as well as their potential impact on structure-function relationships in utero motivates additional study of fetal cartilage. Toward providing tissue engineering design criteria and elucidating structure-function relationships, 11 locations across four regions of the fetal ovine stifle were characterized. Locational and regional differences were found to exist. Although differences in GAG content were observed, compressive stiffness did not vary or correlate with any biochemical component. Patellar cartilage tensile stiffness and strength were significantly greater than those of the medial condyle. Tensile modulus and UTS significantly correlated with pyridinoline content. More advanced zonal organization, more intense collagen II staining, and greater collagen and pyridinoline contents in the trochlear groove and patella suggest these regions exhibit a more advanced maturational state than others. Regional differences in functional properties and their correlations suggest that structure-function relationships emerge in utero. These data address the dearth of information of the fetal ovine stifle, may serve as a repository of information for cartilage engineering strategies, and may help elucidate functional adaptation in fetal articular cartilage. STATEMENT OF SIGNIFICANCE: Engineered neocartilage must be evaluated against healthy native cartilage and cell source tissue to determine its quality and degree of biomimicry. While fetal ovine cartilage has emerged as a promising and translationally relevant cell source with which to engineer neocartilage, it is largely non-characterized. Therefore, 11 locations across four regions (medial condyle, lateral condyle, trochlear groove, and patella) of the fetal ovine stifle were characterized. Importantly, locational and regional differences in functional properties were observed, and significant correlations of tensile properties to collagen and crosslink contents were detected, suggesting that functional adaptation begins in utero. This study provides a repository of quantitative information, clarifies the developmental order of cartilage functional properties, and informs future cartilage engineering efforts.

Toward tissue-engineering of nasal cartilages.

Nasal cartilage pathologies are common; for example, up to 80% of people are afflicted by deviated nasal septum conditions. Because cartilage provides the supportive framework of the nose, afflicted patients suffer low quality of life. To correct pathologies, graft cartilage is often required. Grafts are currently sourced from the patient's septum, ear, or rib. However, their use yields donor site morbidity and is limited by tissue quantity and quality. Additionally, rhinoplasty revision rates exceed 15%, exacerbating the shortage of graft cartilage. Alternative grafts, such as irradiated allogeneic rib cartilage, are associated with complications. Tissue-engineered neocartilage holds promise to address the limitations of current grafts. The engineering design process may be used to create suitable graft tissues. This process begins by identifying the surgeon's needs. Second, nasal cartilages' properties must be understood to define engineering design criteria. Limited investigations have examined nasal cartilage properties; numerous additional studies need to be performed to examine topographical variations, for example. Third, tissue-engineering processes must be applied to achieve the engineering design criteria. Within the recent past, strategies have frequently utilized human septal chondrocytes. As autologous and allogeneic rib graft cartilage is used, its suitability as a cell source should also be examined. Fourth, quantitative verification of engineered neocartilage is critical to check for successful achievement of the engineering design criteria. Finally, following the FDA paradigm, engineered neocartilage must be orthotopically validated in animals. Together, these steps delineate a path to engineer functional nasal neocartilages that may, ultimately, be used to treat human patients. STATEMENT OF SIGNIFICANCE: Nasal cartilage pathologies are common and lead to greatly diminished quality of life. The ability to correct pathologies is limited by cartilage graft quality and quantity, as well as donor site morbidity and surgical complications, such as infection and resorption. Despite the significance of nasal cartilage pathologies and high rhinoplasty revision rates (15%), little characterization and tissue-engineering work has been performed compared to other cartilages, such as articular cartilage. Furthermore, most work is published in clinical journals, with little in biomedical engineering. Therefore, this review discusses what nasal cartilage properties are known, summarizes the current state of nasal cartilage tissue-engineering, and makes recommendations via the engineering design process toward engineering functional nasal neocartilage to address current limitations.

Overcoming Challenges in Engineering Large, Scaffold-Free Neocartilage with Functional Properties.

Although numerous cartilage engineering methods have been described, few report generation of constructs greater than 4 cm2, which is the typical lesion size considered for cell-based therapies. Furthermore, current cell-based therapies only target focal lesions, while treatment of large nonisolated lesions remains an area of great demand. The objective of this study was to scale up fabrication of self-assembled neocartilage from standard sizes of 0.2 cm2 to greater than 8 cm2. Passaged sheep articular chondrocytes were self-assembled into 5 or 25-mm-diameter scaffoldless neocartilage constructs. The 25-mm-diameter constructs grew up to 9.3 cm2 (areal scale-up of 23) and possessed properties similar to those of the 5-mm-diameter constructs; unfortunately, these large constructs were deformed and are unusable as a potential implant. A novel neocartilage fabrication strategy-employing mechanical confinement, a minute deadweight, and chemical stimulation (cytochalasin D, TGF-ß1, chondroitinase-ABC, and lysyl oxidase-like 2 protein)-was found to successfully generate large (25-mm diameter) constructs with flat, homogeneous morphologies. Chemical stimulation increased collagen content and tensile Young's modulus 140% and 240% in the 25-mm-diameter constructs and 30% and 70% in the 5-mm-diameter constructs, respectively. This study not only demonstrated that exceedingly large self-assembled neocartilage can be generated with the appropriate combination of mechanical and chemical stimuli but also that its properties were maintained or even enhanced.

Functional self-assembled neocartilage as part of a biphasic osteochondral construct.

Bone-to-bone integration can be obtained by osteoconductive ceramics such as hydroxyapatite (HAp) and beta-tricalcium phosphate (ß-TCP), but cartilage-to-cartilage integration is notoriously difficult. Many cartilage repair therapies, including microfracture and mosaicplasty, capitalize on the reparative aspects of subchondral bone due to its resident population of stem cells and vascularity. A strategy of incorporating tissue engineered neocartilage into a ceramic to form an osteochondral construct may serve as a suitable alternative to achieve cartilage graft fixation. The use of a tissue engineered osteochondral construct to repair cartilage defects may also benefit from the ceramic's proximity to underlying bone and abundant supply of progenitor cells and nutrients. The objective of the first study was to compare HAp and ß-TCP ceramics, two widely used ceramics in bone regeneration, in terms of their ability to influence neocartilage interdigitation at an engineered osteochondral interface. Additional assays quantified ceramic pore size, porosity, and compressive strength. The compressive strength of HAp was six times higher than that of ß-TCP due to differences in porosity and pore size, and HAp was thus carried forward in the second study as the composition with which to engineer an osteochondral construct. Importantly, it was shown that incorporation of the HAp ceramic in conjunction with the self-assembling process resulted in functionally viable neocartilage. For example, only collagen/dry weight and ultimate tensile strength of the chondral control constructs remained significantly greater than the neocartilage cut off the osteochondral constructs. By demonstrating that the functional properties of engineered neocartilage are not negatively affected by the inclusion of an HAp ceramic in culture, neocartilage engineering strategies may be directly applied to the formation of an osteochondral construct.

Correction: A microbial survey of the International Space Station (ISS).

[This corrects the article DOI: 10.7717/peerj.4029.].

Characterization of costal cartilage and its suitability as a cell source for articular cartilage tissue engineering.

Costal cartilage is a promising donor source of chondrocytes to alleviate cell scarcity in articular cartilage tissue engineering. Limited knowledge exists, however, on costal cartilage characteristics. This study describes the characterization of costal cartilage and articular cartilage properties and compares neocartilage engineered with costal chondrocytes to native articular cartilage, all within a sheep model. Specifically, we (a) quantitatively characterized the properties of costal cartilage in comparison to patellofemoral articular cartilage, and (b) evaluated the quality of neocartilage derived from costal chondrocytes for potential use in articular cartilage regeneration. Ovine costal and articular cartilages from various topographical locations were characterized mechanically, biochemically, and histologically. Costal cartilage was stiffer in compression but softer and weaker in tension than articular cartilage. These differences were attributed to high amounts of glycosaminoglycans and mineralization and a low amount of collagen in costal cartilage. Compared to articular cartilage, costal cartilage was more densely populated with chondrocytes, rendering it an excellent chondrocyte source. In terms of tissue engineering, using the self-assembling process, costal chondrocytes formed articular cartilage-like neocartilage. Quantitatively compared via a functionality index, neocartilage achieved 55% of the medial condyle cartilage mechanical and biochemical properties. This characterization study highlighted the differences between costal and articular cartilages in native forms and demonstrated that costal cartilage is a valuable source of chondrocytes suitable for articular cartilage regeneration strategies.

Tissue engineering potential of human dermis-isolated adult stem cells from multiple anatomical locations.

Abundance and accessibility render skin-derived stem cells an attractive cell source for tissue engineering applications. Toward assessing their utility, the variability of constructs engineered from human dermis-isolated adult stem (hDIAS) cells was examined with respect to different anatomical locations (foreskin, breast, and abdominal skin), both in vitro and in a subcutaneous, athymic mouse model. All anatomical locations yielded hDIAS cells with multi-lineage differentiation potentials, though adipogenesis was not seen for foreskin-derived hDIAS cells. Using engineered cartilage as a model, tissue engineered constructs from hDIAS cells were compared. Construct morphology differed by location. The mechanical properties of human foreskin- and abdominal skin-derived constructs were similar at implantation, remaining comparable after 4 additional weeks of culture in vivo. Breast skin-derived constructs were not mechanically testable. For all groups, no signs of abnormality were observed in the host. Addition of aggregate redifferentiation culture prior to construct formation improved chondrogenic differentiation of foreskin-derived hDIAS cells, as evident by increases in glycosaminoglycan and collagen contents. More robust Alcian blue staining and homogeneous cell populations were also observed compared to controls. Human DIAS cells elicited no adverse host responses, reacted positively to chondrogenic regimens, and possessed multi-lineage differentiation potential with the caveat that efficacy may differ by anatomical origin of the skin. Taken together, these results suggest that hDIAS cells hold promise as a potential cell source for a number of tissue engineering applications.

Validation of MRI and Surgical Decision Making to Predict a Complete Resection in Pelvic Exenteration for Recurrent Rectal Cancer.

BACKGROUND: The main predictor of long-term survival in patients with recurrent rectal cancer is surgical resection with a clear resection margin. MRI plays a role in patient selection and surgical planning. OBJECTIVE: This study aimed to validate MRI in determining pelvic involvement by comparing MRI to histological outcomes, to assess the effect of MRI on surgical planning by comparing MRI findings with the surgical procedure, and to compare MRI anatomical involvement with resection outcome to assess if MRI can predict a clear resection margin. DESIGN: Retrospective study reviewing prepelvic exenteration MRI and correlating organ, involving an MRI with pathological involvement and surgical outcomes. SETTINGS: Single quaternary referral center with a special interest in pelvic exenteration. PATIENTS: The patients included 40 men and 22 women with median age of 60 years who had locally recurrent rectal cancer. MAIN OUTCOME MEASURES: The accuracy of MRI as measured using sensitivity and specificity by correlating MRI involvement with pathological involvement was the primary outcome measured. RESULTS: Recurrence in the anterior and central compartments was identified with accuracy on MRI and was likely to be associated with clear resection margins. MRI was less accurate at determining pelvic sidewall involvement. Lateral recurrence, high sacral, and nerve involvement were more likely to be associated with a positive resection margin. Sensitivity and specificity for pelvic sidewall structures was 46% and 91%. Involvement of nerve roots (60%-69%) and the upper sacrum (80%) on MRI was more likely to predict a positive resection margin than involvement of major pelvic viscera (22%). LIMITATIONS: This study was limited by its retrospective nature. CONCLUSIONS: MRI findings can be used to help predict resection margin. Prospective work with MRI interpretation and close correlation and involvement by pathologists is needed to address imaging and surgical limitations at the pelvic sidewall and high posterior margin.