Properties and Applications of Quaternary Ammonium Gemini Surfactant 12-6-12: An Overview.

Surfactants are amphiphilic molecules and one of the most versatile products of the chemical industry. They can be absorbed at the air-water interface and can align themselves so that the hydrophobic part is in the air while the hydrophilic part is in water. This alignment lowers the surface or interfacial tension. Gemini surfactants are a modern variety of surfactants with unique properties and a very wide range of potential applications. Hexamethylene-1,6-bis(N-dodecyl-N,N-dimethylammonium bromide) is one such representative compound that is a better alternative to a single analogue. It shows excellent surface, antimicrobial, and anticorrosion properties. With a highly efficient synthetic method and a good ecological profile, it is a potential candidate for numerous applications, including biomedical applications.

Evaluation of the antiviral potential of gemini surfactants against influenza virus H1N1.

Influenza A virus (IAV) affects human health worldwide as a high-risk disease. It can neither be easily controlled by current vaccines and nor be treated by conventional drugs. Gemini surfactants (GS) have shown several properties including antiviral activity. In this study, the antiviral capacity of some GS compounds with different levels of hydrophobicity was examined. The 50% cytotoxic (CC50) and non-cytotoxic (NCTC) concentrations of the compounds were determined by MTT method. The NCTCs, the same as effective concentrations (EC50s), were tested for the antiviral capacity against IAV in different combination treatments for 1 h incubation on MDCK cells. The HA and MTT assays were used to evaluate the virus titer and cell viabilities, respectively. The hemolytic activity of the compounds was also assessed using an HA inhibition assay. To evaluate the apoptotic effect of GS compounds, Annexin V-PI kit was used. The HA titers decreased between 1-6.5 logs, 1-4.5 logs, and 1-5.5 logs in simultaneous, pre- and post-penetration combination treatments, respectively. The cell viability values in all combination treatments were favorable. The HI assay indicated the hemolytic potential of GSs and their physical interaction with viral HA. The apoptosis test results highlighted anti-apoptotic capacity of the GS compounds alone and in the presence of influenza virus especially for the hydrophobic ones. Gemini surfactants were generally more efficacious in simultaneous treatment. Their antiviral potential may be attributed to their physical interaction with viral membrane or HA glycoprotein that disrupts viral particle or blocks viral entry to the cell and inhibits its propagation.

Capsaicin-loaded alginate nanoparticles embedded polycaprolactone-chitosan nanofibers as a controlled drug delivery nanoplatform for anticancer activity.

Nanocarrier-based drug delivery systems have been designed into various structures that can effectively prevent cancer progression and improve the therapeutic cancer index. However, most of these delivery systems are designed to be simple nanostructures with several limitations, including low stability and burst drug release features. A nano-in-nano delivery technique is explored to address the aforementioned concerns. Accordingly, this study investigated the release behavior of a novel nanoparticles-in-nanofibers delivery system composed of capsaicin-loaded alginate nanoparticles embedded in polycaprolactone-chitosan nanofiber mats. First, alginate nanoparticles were prepared with different concentrations of cationic gemini surfactant and using nanoemulsion templates. The optimized formulation of alginate nanoparticles was utilized for loading capsaicin and exhibited a diameter of 19.42 ± 1.8 nm and encapsulation efficiency of 98.7 % ± 0.6 %. Likewise, blend polycaprolactone-chitosan nanofibers were prepared with different blend ratios of their solutions (i.e., 100:0, 80:20, 60:40) by electrospinning method. After the characterization of electrospun mats, the optimal nanofibers were employed for embedding capsaicin-loaded alginate nanoparticles. Our findings revealed that embedding capsaicin-loaded alginate nanoparticles in polycaprolactone-chitosan nanofibers, prolonged capsaicin release from 120 h to more than 500 h. Furthermore, the results of in vitro analysis demonstrated that the designed nanoplatform could effectively inhibit the proliferation of MCF-7 human breast cells while being nontoxic to human dermal fibroblasts (HDF). Collectively, the prepared nanocomposite drug delivery platform might be promising for the long-term and controlled release of capsaicin for the prevention and treatment of cancer.

Fabrication of Encapsulated Gemini Surfactants.

(1) Background: Encapsulation of surfactants is an innovative approach that allows not only protection of the active substance, but also its controlled and gradual release. This is primarily used to protect metallic surfaces against corrosion or to create biologically active surfaces. Gemini surfactants are known for their excellent anticorrosion, antimicrobial and surface properties; (2) Methods: In this study, we present an efficient methods of preparation of encapsulated gemini surfactants in form of alginate and gelatin capsules; (3) Results: The analysis of infrared spectra and images of the scanning electron microscope confirm the effectiveness of encapsulation; (4) Conclusions: Gemini surfactants in encapsulated form are promising candidates for corrosion inhibitors and antimicrobials with the possibility of protecting the active substance against environmental factors and the possibility of controlled outflow.

Cationic gemini surfactant properties, its potential as a promising bioapplication candidate, and strategies for improving its biocompatibility: A review.

Gemini surfactants consist of two cationic monomers of a surfactant linked together with a spacer. The specific structure of a cationic gemini surfactant is the reason for both its high surface activity and its ability to decrease the surface tension of water. The high surface activity and unique structure of gemini surfactants result in outstanding properties, including antibacterial and antifungal activity, anticorrosion properties, unique aggregation behaviour, the ability to form various structures reversibly in response to environmental conditions, and interactions with biomacromolecules such as DNA and proteins. These properties can be tailored by selecting the optimal structure of a gemini surfactant in terms of the nature and length of its alkyl substituents, spacer, and head group. Additionally, regarding their properties, comparison with their monomeric counterparts demonstrates that gemini surfactants have higher performance efficacy at lower concentrations. Hence, less material is needed, and the toxicity is lower. However, there are some limitations regarding their biocompatibility that have led researchers to develop amino acid-based and sugar-based gemini surfactants. Owing to their remarkable properties, cationic gemini surfactants are promising candidates for bioapplications such as drug delivery systems, gene carriers, and biomaterial surface modification.

Antimicrobial Activity of Gemini Surfactants with Ether Group in the Spacer Part.

Due to their large possibility of the structure modification, alkylammonium gemini surfactants are a rapidly growing class of compounds. They exhibit significant surface, aggregation and antimicrobial properties. Due to the fact that, in order to achieve the desired utility effect, the minimal concentration of compounds are used, they are in line with the principle of greenolution (green evolution) in chemistry. In this study, we present innovative synthesis of the homologous series of gemini surfactants modified at the spacer by the ether group, i.e., 3-oxa-1,5-pentane-bis(N-alkyl-N,N-dimethylammonium bromides). The critical micelle concentrations were determined. The minimal inhibitory concentrations of the synthesized compounds were determined against bacteria Escherichia coli ATCC 10536 and Staphylococcus aureus ATCC 6538; yeast Candida albicans ATCC 10231; and molds Aspergillus niger ATCC 16401 and Penicillium chrysogenum ATCC 60739. We also investigated the relationship between antimicrobial activity and alkyl chain length or the nature of the spacer. The obtained results indicate that the synthesized compounds are effective microbicides with a broad spectrum of biocidal activity.

Application of Biocides and Super-Absorbing Polymers to Enhance the Efficiency of Filtering Materials.

Studies on the functionalization of materials used for the construction of filtering facepiece respirators (FFRs) relate to endowing fibers with biocidal properties. There is also a real need for reducing moisture content accumulating in such materials during FFR use, as it would lead to decreased microorganism survival. Thus, in our study, we propose the use of superabsorbent polymers (SAPs), together with a biocidal agent (biohalloysite), as additives in the manufacturing of polypropylene/polyester (PP/PET) multifunctional filtering material (MFM). The aim of this study was to evaluate the MFM for stability of the modifier's attachment to the polymer matrix, the degree of survival of microorganisms on the nonwoven, and its microorganism filtration efficiency. Scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) spectroscopy were used to test the stability of the modifier's attachment. The filtration efficiency was determined under conditions of dynamic aerosol flow of S. aureus bacteria. The survival rates (N%) of the following microorganisms were assessed: Escherichia coli and Staphylococcus aureus bacteria, Candida albicans yeast, and Aspergillus niger mold using the AATCC 100-2004 method. FTIR spectrum analysis confirmed the pre-established composition of MFM. The loss of the active substance from MFM in simulated conditions of use did not exceed 0.02%, which validated the stability of the modifier's attachment to the PP/PET fiber structure. SEM image analysis verified the uniformity of the MFM structure. Lower microorganism survival rates were detected for S. aureus, C. albicans, and E. coli on the MFM nonwoven compared to control samples that did not contain the modifiers. However, the MFM did not inhibit A. niger growth. The MFM also showed high filtration efficiency (99.86%) against S. aureus bacteria.

Gemini surfactant as multifunctional corrosion and biocorrosion inhibitors for mild steel.

Biocorrosion is an important type of corrosion which leads to economic losses across oil and gas industries, due to increased monitoring, maintenance, and a reduction in platform availability. Ideally, a chemical compound engineered to mitigate against biocorrosion would possess both antimicrobial properties, as well as efficient corrosion inhibition. Gemini surfactants have shown efficacy in both of these properties, however there still remains a lack of electrochemical information regarding biocorrosion inhibition. The inhibition of corrosion and biocorrosion, by cationic gemini surfactants, of carbon steel was investigated. The results showed that the inhibition efficiency of the gemini surfactants was high (consistently >95%), even at low concentrations. Gemini surfactants also showed strong antimicrobial activity, with a minimum inhibitory concentration (0.018 mM). Corrosion inhibition was investigated by electrochemical impedance spectroscopy (EIS) and linear polarisation resistance (LPR), with biocorrosion experiments carried out in an anaerobic environment. Surface morphology was analysed using scanning electron microscopy (SEM).

Multistep approach to control microbial fouling of historic building materials by aerial phototrophs.

The scientific multistep approach described herein is a result of two years of research into a control method against microbial fouling and biodeterioration of historic building materials by phototrophs. A series of tests were conducted to select the best antifouling agent for eliminating 'green' coatings and protecting surfaces against biofouling. Of the seven active compounds, two with the best penetration abilities were subjected to a photosynthetic activity inhibition test using confocal microscopy. Of the two, a quaternary ammonium salt (QAC) - didecyldimethylammonium chloride (DDAC) - was found to be the most effective. Ten biocides containing QACs at different concentrations were then tested against 'green' coatings on wood, brick and plaster, with the best four being selected for further research in model conditions. As a result, biocides containing >14% (v v-1) DDAC were found to be successful antifouling agents for protecting historical materials against biodeterioration by phototrophs.

Biodegradability and aquatic toxicity of new cleavable betainate cationic oligomeric surfactants.

New cleavable oligomeric cationic surfactants containing ester groups susceptible to hydrolysis between the hydrocarbon tails and the hydrophilic moiety have been synthesized and their biodegradability and aquatic toxicity examined. Aerobic biodegradability was evaluated by applying a standard method for ready biodegradability, the CO2 Headspace test. Aquatic toxicity was assessed by means of the acute toxicity test with Daphnia. Cleavable oligomeric cationic surfactants undergo a significant biodegradation extent (31-52%) as compared to dimeric surfactants without ester groups that showed null degradation in previous works. However, they do not attain the threshold of ultimate degradation required (60%) to be classed as easily biodegradable chemicals. On the other hand, the introduction of cleavable groups in the surfactant hydrophobic chains reduces the toxic effects on the microorganisms responsible for degradation observed for conventional alkyl ammonium dimeric surfactants. Acute toxicity values of betainate cationic oligomeric surfactants to Daphnia magna, IC50-48 h, varies from 1.5 to 50 mg/L. Aquatic toxicity of oligomeric cationic surfactants depends on their hydrophobicity and increases regularly with the alkyl chain length. However, whether the surfactant is a dimeric or a trimeric betaine ester does not affect their acute toxicity to crustacean.

Viability, Enzymatic and Protein Profiles of Pseudomonas aeruginosa Biofilm and Planktonic Cells after Monomeric/Gemini Surfactant Treatment.

This study set out to investigate the biological activity of monomeric surfactants dodecyltrimethylammonium bromide (DTAB) and the next generation gemini surfactant hexamethylene-1,6-bis-(N,N-dimethyl-N-dodecylammonium bromide) (C6) against the environmental strain Pseudomonas aeruginosa PB_1. Minimal inhibitory concentrations (MIC) were determined using the dilution method. The viability of the planktonic cells and biofilm was assessed using the plate count method. Enzymatic profile was determined using the API-ZYM system. Proteins were extracted from the biofilm and planktonic cells and analysed using SDS-PAGE. The MIC of the gemini surfactants was 70 times lower than that of its monomeric analogue. After 4 h of treatment at MIC (0.0145 mM for C6 and 1.013 mM for DTAB), the number of viable planktonic cells was reduce by less than 3 logarithm units. At the concentration ≥MIC, a reduction in the number of viable cells was observed in mature biofilms (p < 0.05). Treatment for 4 h with gemini surfactant at 20 MIC caused complete biofilm eradication. At sub-MIC, the concentration of some enzymes reduced and their protein profiles changed. The results of this study show that due to its superior antibacterial activity, gemini compound C6 can be applied as an effective microbiocide against P. aeruginosa in both planktonic and biofilm forms.

Impact of Cationic and Neutral Gemini Surfactants on Conidia and Hyphal Forms of Aspergillus brasiliensis.

This study investigates the biological activity of two cationic gemini surfactants, hexamethylene-1,6-bis-(N,N-dimethyl-N-dodecylammonium bromide) C6 and pentamethylene-1,5-bis-(N,N-dimethyl-N-dodecyla,.mmonium bromide) C5, and their two neutral analogs, hexamethylene-1,6-bis-(N-methyl-N-dodecylamine) (A6) and pentamethylene-1,5-bis-(N-methyl-N-dodecylamine) (A5). Experiments were performed with Aspergillus brasiliensis, which is used in the standard tests for biocides. The minimal inhibitory concentration (MIC) values for conidia and mycelium were determined using the dilution method. The viability of the conidia was evaluated using the plate count method. The dry mass of the mycelium was determined using the thermogravimetric method. Ergosterol was extracted from the mycelium and evaluated by gas chromatography. The effect of gemini surfactants on fungal morphology was observed using scanning electron microscopy. Cationic gemini surfactants were found to be active at lower concentrations compared to their non-ionic analogues, rapidly reducing the total number of conidia that were able to grow. They also decreased both the ergosterol content in the mycelium and its dry weight. These results suggest that cationic gemini surfactants C6 and C5 could have a wide range of practical applications as active compounds. However, it should be remembered that usage at too low concentrations, below the MIC, will only lead to short-term disturbances in the development of conidia and mycelium.

Action of Monomeric/Gemini Surfactants on Free Cells and Biofilm of Asaia lannensis.

We investigated the biological activity of surfactants based on quaternary ammonium compounds: gemini surfactant hexamethylene-1,6-bis-(N,N-dimethyl-N-dodecylammonium bromide) (C6), synthesized by the reaction of N,N-dimethyl-N-dodecylamine with 1,6-dibromohexane, and its monomeric analogue dodecyltrimethylammonium bromide (DTAB). The experiments were performed with bacteria Asaia lannensis, a common spoilage in the beverage industry. The minimal inhibitory concentration (MIC) values were determined using the tube standard two-fold dilution method. The growth and adhesive properties of bacterial cells were studied in different culture media, and the cell viability was evaluated using plate count method. Both of the surfactants were effective against the bacterial strain, but the MIC of gemini compound was significantly lower. Both C6 and DTAB exhibited anti-adhesive abilities. Treatment with surfactants at or below MIC value decreased the number of bacterial cells that were able to form biofilm, however, the gemini surfactant was more effective. The used surfactants were also found to be able to eradicate mature biofilms. After 4 h of treatment with C6 surfactant at concentration 10 MIC, the number of bacterial cells was reduced by 91.8%. The results of this study suggest that the antibacterial activity of the gemini compound could make it an effective microbiocide against the spoilage bacteria Asaia sp. in both planktonic and biofilm stages.

Synthesis, Structure, Surface and Antimicrobial Properties of New Oligomeric Quaternary Ammonium Salts with Aromatic Spacers.

New dimeric, trimeric and tetrameric quaternary ammonium salts were accomplished by reaction of tertiary alkyldimethyl amines with appropriate bromomethylbenzene derivatives. A series of new cationic surfactants contain different alkyl chain lengths (C4-C18), aromatic spacers and different numbers of quaternary nitrogen atoms. The structure of the products was confirmed by spectral analysis (FT-IR, ¹H-NMR, 13C-NMR and 2D-NMR), mass spectroscopy (ESI-MS), elemental analysis, as well as PM5 semiempirical methods. Compound (21) was also analyzed using X-ray crystallography. Critical micelle concentration (CMC) of 1,4-bis-[N-(1-alkyl)-N,N-dimethylammoniummethyl]benzene dibromides (3-9) was determined to characterize the aggregation behavior. The antimicrobial properties of novel QACs (Quaternary Ammonium Salts) were examined to set their minimal inhibitory concentration (MIC) values against fungi Aspergillus niger, Candida albicans, Penicillium chrysogenum and bacteria Staphylococcus aureus, Bacillus subtilis, Escherichia coli and Pseudomonas aeruginosa.

Time-Dependent Antimicrobial Activity of Filtering Nonwovens with Gemini Surfactant-Based Biocides.

Previous studies on nonwovens used for respiratory protective devices (RPDs) were related to equipment intended for short-term use. There is only limited research on the development of biocidal nonwoven fabrics for reusable RPDs that could be used safely in an industrial work environment where there is a risk of microbial growth. Moreover, a new group of biocides with high antimicrobial activity-gemini surfactants, has never been explored for textile's application in previous studies. The aim of this study was to develop high-efficiency melt-blown nonwovens containing gemini surfactants with time-dependent biocidal activity, and to validate their antimicrobial properties under conditions simulating their use at a plant biomass-processing unit. A set of porous biocidal structures (SPBS) was prepared and applied to the melt-blown polypropylene (PP) nonwovens. The biocidal properties of the structures were triggered by humidity and had different activation rates. Scanning electron microscopy was used to undertake structural studies of the modified PP/SPBS nonwovens. In addition, simulation of plant biomass dust deposition on the nonwovens was performed. The biocidal activity of PP/SPBS nonwovens was evaluated following incubation with Escherichia coli and Aspergillus niger from the American Type Culture Collection, and with Pseudomonas fluorescens and Penicillium chrysogenum isolated from the biomass. PP/SPBS nonwovens exhibited antimicrobial activity to varying levels. Higher antimicrobial activity was noted for bacteria (R = 87.85-97.46%) and lower for moulds (R = 80.11-94.53%).

Synthesis, Structure and Antimicrobial Properties of Novel Benzalkonium Chloride Analogues with Pyridine Rings.

Quaternary ammonium compounds (QACs) are a group of compounds of great economic significance. They are widely used as emulsifiers, detergents, solubilizers and corrosion inhibitors in household and industrial products. Due to their excellent antimicrobial activity QACs have also gained a special meaning as antimicrobials in hospitals, agriculture and the food industry. The main representatives of the microbiocidal QACs are the benzalkonium chlorides (BACs), which exhibit biocidal activity against most bacteria, fungi, algae and some viruses. However, the misuses of QACs, mainly at sublethal concentrations, can lead to an increasing resistance of microorganisms. One of the ways to avoid this serious problem is the introduction and use of new biocides with modified structures instead of the biocides applied so far. Therefore new BAC analogues P13-P18 with pyridine rings were synthesized. The new compounds were characterized by NMR, FT-IR and ESI-MS methods. PM3 semiempirical calculations of molecular structures and the heats of formation of compounds P13-P18 were also performed. Critical micellization concentrations (CMCs) were determined to characterize the aggregation behavior of the new BAC analogues. The antimicrobial properties of novel QACs were examined by determining their minimal inhibitory concentration (MIC) values against the fungi Aspergillus niger, Candida albicans, Penicillium chrysogenum and bacteria Staphylococcus aureus, Bacillus subtilis, Escherichia coli and Pseudomonas aeruginosa. The MIC values of N,N-dimethyl-N-(4-methylpyridyl)-N-alkylammonium chlorides for fungi range from 0.1 to 12 mM and for bacteria, they range from 0.02 to 6 mM.

Protection of Historical Wood against Microbial Degradation-Selection and Application of Microbiocides.

The aim of this study was to select effective and safe microbiocides for the disinfection and protection of historical wooden surfaces at the former Auschwitz II-Birkenau concentration and extermination camp. We tested seven active compounds against bacteria and moulds, of which didecyldimethylammonium chloride and N-(3-aminopropyl)-N-dodecylpropane-1,3-diamine were effective even at 0.02%-2%. Subsequently, eight microbiocides containing the selected active ingredients were chosen and applied three times on the surface of wood samples colonized by bacteria and moulds. ABM-1 and ABM-2-6% solution; Rocima 101-8%; Preventol R 80-12%; Acticide 706 LV-15% and Boramon-30% were the most effective disinfectants. Under laboratory conditions, ABM-1, Boramon and Rocima 101 ensured antimicrobial protection of new wood samples for six months. In situ, 30% Boramon and 8% Rocima 101 applied by spraying effectively protected the historical wood from bacterial and mould growth for 12 and 3 months, respectively. Colour and luminance of the new wood were not altered after exposure to the biocides. Boramon and Rocima 101, applied by the spraying method, caused no significant change in the colour of the historical wood. Results from this study were used to develop a procedure for the protection of wood in historical buildings against biodeterioration.

Biodegradability and aquatic toxicity of quaternary ammonium-based gemini surfactants: Effect of the spacer on their ecological properties.

Aerobic biodegradability and aquatic toxicity of five types of quaternary ammonium-based gemini surfactants have been examined. The effect of the spacer structure and the head group polarity on the ecological properties of a series of dimeric dodecyl ammonium surfactants has been investigated. Standard tests for ready biodegradability assessment (OECD 310) were conducted for C12 alkyl chain gemini surfactants containing oxygen, nitrogen or a benzene ring in the spacer linkage and/or a hydroxyethyl group attached to the nitrogen atom of the head groups. According to the results obtained, the gemini surfactants examined cannot be considered as readily biodegradable compounds. The negligible biotransformation of the gemini surfactants under the standard biodegradation test conditions was found to be due to their toxic effects on the microbial population responsible for aerobic biodegradation. Aquatic toxicity of gemini surfactants was evaluated against Daphnia magna. The acute toxicity values to Daphnia magna, IC50 at 48 h exposure, ranged from 0.6 to 1 mg/L. On the basis of these values, the gemini surfactants tested should be classified as toxic or very toxic to the aquatic environment. However, the dimeric quaternary ammonium-based surfactants examined result to be less toxic than their corresponding monomeric analogs. Nevertheless the aquatic toxicity of these gemini surfactants can be reduced by increasing the molecule hydrophilicity by adding a heteroatom to the spacer or a hydroxyethyl group to the polar head groups.

Quaternary ammonium biocides as antimicrobial agents protecting historical wood and brick.

Quaternary ammonium compounds (QACs) are widely used in disinfection of water, surfaces and instruments as well as in textile, leather and food industries because of their relatively low toxicity, broad antimicrobial spectrum, non-volatility and chemical stability. Due to these advantages, QACs are also used in restoration and can be applied on historical material. The aim of this study was to determine the usefulness of biocides based on quaternary ammonium salts and containing various excipients in the protection of historical materials against microbial growth. The study determined the antimicrobial activity of three biocides against bacteria: Pseudomonas fluorescens, Staphylococcus equorum, Bacillus cereus, Bacillus muralis, Sporosarcina aquimarina and Rhodococcus fascians, and moulds: Chaetomium globosum, Penicillium citreonigrum, Cladosporium cladosporioides I, Acremonium strictum, Aspergillus fumigatus and Cladosporium cladosporioides II, all isolated from historical wood and brick. Staphylococcus equorum, Bacillus cereus, Sporosarcina aquimarina and Rhodococcus fascians bacteria, and Cladosporium cladosporioides I and Acremonium strictum moulds showed high sensitivity to quaternary ammonium biocides. Historical wood can be effectively disinfected by three applications of biocide A (30% v/v) containing dodecyl dimethyl ammonium chloride (DDAC), citric acid, propiconazole and propanol. Disinfection of historical brick can be carried out by three applications of 6% v/v solutions of biocide B (based on DDAC and ethylenediaminetetraacetic acid - EDTA) or biocide C (containing a non-ionic surfactant, DDAC and EDTA). Effective protection of historical building materials against microbial growth for a period of seven days can be achieved by the application of biocide A (30% v/v) on the wood surface and biocide B (6% v/v) on the brick surface.

Monomeric and gemini surfactants as antimicrobial agents - influence on environmental and reference strains.

Quaternary ammonium salts (QAS) belong to surfactant commonly used both, in the household and in different branches of industry, primarily in the process of cleaning and disinfection. They have several positive features inter alia effectively limiting the development of microorganisms on many surfaces. In the present work, two compounds were used as biocides: hexamethylene-1,6-bis-(N,N-dimethyl-N-dodecylammonium bromide) that belongs to the gemini surfactant (GS), and its single analogue - dodecyl(trimethyl)ammonium bromide (DTAB). Two fold dilution method was used to determine the minimum concentration of compounds (MIC) which inhibit the growth of bacteria: Staphylococcus aureus (ATCC 6538 and an environmental strain), Pseudomonas aeruginosa (ATCC 85327 and an environmental strain), and yeast Candida albicans (ATCC 11509 and an environmental strain). The viability of cells in liquid cultures with addition of these substances at » MIC, ½ MIC and MIC concentrations were also determined. The obtained results show that DTAB inhibits the growth of bacteria at the concentration of 0.126-1.010 µM/ml, and gemini surfactant is active at 0.036-0.029 µM/ml. Therefore, GS is active at more than 17-70-fold lower concentrations than its monomeric analogue. Strains isolated from natural environment are less sensitive upon testing biocides than the references strains. Both compounds at the MIC value reduced the number of cells of all strains. The use of too low concentration of biocides can limit the growth of microorganisms, but often only for a short period of time in case of special environmental strains. Later on, they can adapt to adverse environmental conditions and begin to evolve defence mechanisms.