RESUMEN
Betalains are bioactive compounds with attractive antioxidant properties for the food industry, endowing them with potential application in food coatings to maintain quality and extend shelf life. However, they have low stability to factors such as light, temperature, and humidity. An alternative to protect bioactive compounds is nanoencapsulation; one of the most used techniques to produce an encapsulation is coaxial electrospraying. In this research, the preparation and characterization of gelatin-betalain nanoparticles were carried out using the coaxial electrospray technique. Betalains were extracted from pitaya (Stenocereus thurberi) and encapsulated in gelatin. The obtained material was evaluated by SEM, FTIR, TGA, and DSC techniques and for its antioxidant capacity. By SEM, nanoparticles with spherical and monodisperse morphologies were observed, with betalain concentrations of 1 and 3% w/v and average diameters of 864 and 832 µm, respectively. By FTIR, the interaction between betalain and gelatin was observed through amino groups and hydrogen bonds. Likewise, the antioxidant activity of the betalains was maintained at the time of encapsulation, increasing the antioxidant activity as the concentration increased. The results of the DPPH, ABTS, and total phenols methods were 645.4592 µM T/g, 832.8863 ± 0.0110 µM T/g, and 59.8642 ± 0.0279 mg GAE/g for coaxial nanoparticles with 3% betalains, respectively. Therefore, the coaxial electrospray technique was useful for obtaining nanoparticles with good antioxidant properties, and due to the origin of its components and since the use of toxic solvents is not necessary in the technique, the material obtained can be considered food grade with potential application as a coating on functional foods.
RESUMEN
The preparation of composites of synthetic and natural polymers represent an interesting option to combine properties; in this manner, polypropylene and chitosan extruded films using a different proportion of components and polypropylene-graft-maleic anhydride (PPgMA) as compatibilizer were prepared. The effect of the content of the biopolymer in the polypropylene (PP) matrix, the addition of compatibilizer, and the particle size on the properties of the composites was analyzed using characterization by fourier transform-infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), differential scanning calorimetry (DSC), tensile strength, and contact angle, finding that in general, the addition of the compatibilizer and reducing the particle size of the chitosan, favored the physicochemical and morphological properties of the films.
RESUMEN
Chitosan films (CF) with carvacrol (CAR) [0.5%, 1.0% and 1.5% v/v] were prepared by the emulsion method. The retained CAR, water solubility, water vapor permeability (WVP), optical, mechanical properties, antibacterial and antioxidant capacity of films were analyzed. The results indicate that the retention of CAR in the CF was ≈50%. The incorporation of CAR to CF decreased the water solubility, the WVP, the yellowing and transparency and the tensile strength, but increased the stiffness. Microcapsules with diameters of 2 to 7 µm were found on the surface CF-CAR. The CF-CAR with highest CAR concentrations showed antibacterial activity against S. typhimurium and E. coli O157:H7. The CF-CAR had higher antioxidant capacity and an increased protective effect against oxidation of erythrocytes in different grades. These results suggest potential applications of CF-CAR as active packaging to preserve food products.