RESUMEN
Nucleic acid therapeutics, specifically antisense oligonucleotides (ASOs), can effectively modulate gene expression and protein function, leading to long-lasting curative effects. The hydrophilic nature and large size of oligonucleotides present translational challenges, which have led to the exploration of various chemical modifications and delivery systems. The present review provides insights into the potential role of liposomes as a drug delivery system for ASOs. The potential benefits of liposomes as an ASO carrier, along with their method of preparation, characterization, routes of administration, and stability aspects, have been thoroughly discussed. A novel perspective in terms of therapeutic applications of liposomal ASO delivery in several diseases such as cancer, respiratory disease, ophthalmic delivery, infectious diseases, gastrointestinal disease, neuronal disorders, hematological malignancies, myotonic dystrophy, and neuronal disorders remains the major highlights of this review.
RESUMEN
mRNA vaccines have been demonstrated as a powerful alternative to traditional conventional vaccines because of their high potency, safety and efficacy, capacity for rapid clinical development, and potential for rapid, low-cost manufacturing. These vaccines have progressed from being a mere curiosity to emerging as COVID-19 pandemic vaccine front-runners. The advancements in the field of nanotechnology for developing delivery vehicles for mRNA vaccines are highly significant. In this review we have summarized each and every aspect of the mRNA vaccine. The article describes the mRNA structure, its pharmacological function of immunity induction, lipid nanoparticles (LNPs), and the upstream, downstream, and formulation process of mRNA vaccine manufacturing. Additionally, mRNA vaccines in clinical trials are also described. A deep dive into the future perspectives of mRNA vaccines, such as its freeze-drying, delivery systems, and LNPs targeting antigen-presenting cells and dendritic cells, are also summarized.
Asunto(s)
COVID-19 , Nanopartículas , Vacunas , Humanos , COVID-19/prevención & control , Pandemias , Vacunas de ARNm , Células Presentadoras de Antígenos , Vacunas contra la COVID-19/genética , Vacunas SintéticasRESUMEN
The delivery of proteins and peptides via an oral route poses numerous challenges to improve the oral bioavailability and patient compliance. To overcome these challenges, as well as to improve the permeation of proteins and peptides via intestinal mucosa, several chemicals have been studied such as surfactants, fatty acids, bile salts, pH modifiers, and chelating agents, amongst these medium chain fatty acid like C10 (sodium caprate) and Sodium N-[8-(2-hydroxybenzoyl) amino] caprylate (SNAC) and its derivatives that have been well studied from a clinical perspective. This current review enumerates the challenges involved in protein and peptide delivery via the oral route, i.e., non-invasive routes of protein and peptide administration. This review also covers the chemistry behind SNAC and toxicity as well as mechanisms to enhance the oral delivery of clinically proven molecules like simaglutide and other small molecules under clinical development, as well as other permeation enhancers for efficient delivery of proteins and peptides.
Asunto(s)
Ácidos Grasos , Mucosa Intestinal , Humanos , Preparaciones Farmacéuticas/metabolismo , Ácidos Grasos/metabolismo , Mucosa Intestinal/metabolismo , Administración Oral , Proteínas/metabolismo , Absorción IntestinalRESUMEN
Immunoengineering technologies harness the power of immune system modulators such as monoclonal antibodies, cytokines, and vaccines to treat myriad diseases. Immunoengineering innovations have showed great promise in various practices including oncology, infectious disease, autoimmune diseases, and transplantation. Despite the countless successes, the majority of immunoengineering products contain active moieties that are prone to instability. The current review aims to feature freeze-drying as a robust and scalable solution to the inherent stability challenges in immunoengineering products by preventing the active moiety from degradation. Furthermore, this review describes the stability issues related to immunoengineering products and the utility of the lyophilization process to preserve the integrity and efficacy of immunoengineering tools ranging from biologics to nanoparticle-based vaccines. The concept of the freeze-drying process is described highlighting the quality by design (QbD) for robust process optimization. Case studies of lyophilized immunoengineering technologies and relevant clinical studies using immunoengineering products are discussed.
RESUMEN
Hot-melt extrusion (HME) technology is one of the primary approaches that has been implemented in recent years to overcome poor drug solubility/dissolution issues through the development of solid dispersion systems. Carbon dioxide (CO2) either in supercritical (SupC) or subcritical (SubC) forms has been introduced to HME as a temporary plasticizer, reducing the operating temperature and eventually processing heat-sensitive molecules more efficiently. In this paper, a comprehensive review of CO2-HME processes focused on pharmaceutical polymers and applications is presented. The steps and requirements for the setup of experimental devices are demonstrated, with a detailed influence of CO2 characteristics on HME processes. The most relevant physical and chemical properties of pharmaceutical grade polymers subjected to the CO2- HME process are described. The basic knowledge and main mechanisms of HME process parameters in conjunction with CO2 concentration with regard to process feasibility and final product formation are discussed. HME coupled with CO2 is extensively reviewed to provide a complete understanding of how to optimize the process parameters and conditions to reach optimized characteristics of final outcomes, as well as the sequential relationship between those outcomes (foamingâ¯ââ¯porosityâ¯ââ¯millingâ¯ââ¯tableting). Pharmaceutical applications of CO2-based HME are presented in detailed case studies, including extrusion feasibility, solubility, dissolution rate enhancement, and gastroretentive or floating drug delivery. Finally, the current status of general CO2-based techniques, as well as future perspectives and opportunities for promising applications through the integration of CO2 with HME is presented.
Asunto(s)
Dióxido de Carbono , Polímeros , Polímeros/química , Dióxido de Carbono/química , Composición de Medicamentos/métodos , Solubilidad , Comprimidos , Calor , Tecnología Farmacéutica/métodosRESUMEN
Many biologic drug products, particularly monoclonal antibodies (mAbs), were off-patented between 2015 and 2020, and this process is continuing as the number of biologics approvals has increased. However, the availability of affordable biosimilars is delayed by secondary patents related to the formulation and manufacturing process. Therefore, an alternative formulation development is required to avoid infringement of formulation related patents. Several variables must be considered while developing alternative non-infringement formulations, including the time gap between the expiration of the molecule patent and the formulation patent, the ability not to infringe other secondary patents (process-related), and project timelines. As a part of life cycle management, innovator companies are adopting multiple strategies to delay biosimilar competition. Biosimilar companies could use the innovator formulation knowledge space to develop alternative formulations at the expense of time and cost. The present review discusses the key approaches in biosimilar formulation development, and further summarizes the use of innovator formulation knowledge space for biosimilar mAbs product development.
Asunto(s)
Biosimilares Farmacéuticos , Anticuerpos Monoclonales/uso terapéutico , Aprobación de DrogasRESUMEN
Amorphous solid dispersions (ASDs) are a proven system for achieving a supersaturated state of drug, in which the concentration of drug is greater than its crystalline solubility. The usage of Hydroxypropyl Methylcellulose Acetate Succinate (HPMCAS) in the development of ASDs has grown significantly, as evidenced by the fact that majority of commercially approved ASD formulations are based on HPMCAS. HPMCAS has been widely utilized as a solubility enhancer and precipitation inhibitor or stabilizer to achieve supersaturation and inhibit crystallization of drugs in the gastrointestinal tract. The characteristics of HPMCAS ASDs such as less hygroscopic, strong drug-polymer hydrophobic interactions, high solubilization efficiency, greater potential to generate, maintain drug supersaturation and crystallization inhibition outperform other polymeric carriers in ASD development. Furthermore, combining HPMCAS with other polymers or surfactants as ternary ASDs could be a viable approach for enhancing oral absorption of poorly soluble drugs. This review discusses the concepts of supersaturation maintenance or precipitation inhibition of HPMCAS in the ASD formulations. In addition, the mechanisms underlying for improved dissolution performance, oral bioavailability and stability of HPMCAS ASDs are explored.
Asunto(s)
Metilcelulosa , Polímeros , Composición de Medicamentos , Metilcelulosa/análogos & derivados , Metilcelulosa/química , Polímeros/química , SolubilidadRESUMEN
Nucleation inhibition and maintenance of drug supersaturation over a prolonged period are desirable for improving oral absorption of amorphous solid dispersions. The present study investigates the impact of binary and ternary amorphous solid dispersions on the supersaturation kinetics of nifedipine using the polymers hydroxypropylmethylcellulose acetate succinate (HPMCAS) LG, and HG, Eudragit® RSPO, Eudragit® FS100, Kollidon® VA64 and Plasdone™ K-29/32. The amorphous solubility, nucleation induction time, and particle size analysis of nifedipine in a supersaturated solution were performed with and without the presence of polymers, alone or in combination. The HPMCAS-HG and HPMCAS-HG + LG combinations showed the highest nifedipine amorphous solubility of 169.47, 149.151 µg/mL, respectively and delay in nucleation induction time up to 120 min compared to other polymeric combinations. The solid dispersions prepared via hot melt extrusion showed the transformation of crystalline nifedipine to amorphous form. The in-vitro non-sink dissolution study revealed that although the binary nifedipine/HPMCAS-LG system had shown the greater supersaturation concentration of 66.1 µg/mL but could not maintain a supersaturation level up to 360 min. A synergistic effect emerged for ternary nifedipine/HPMCAS-LG/HPMCAS-HG, and nifedipine/HPMCAS-LG/Eudragit®FS100 systems maintained the supersaturation level with enhanced dissolution performance, demonstrating the potential of polymeric combinations for improved amorphous solid dispersion performance.
Asunto(s)
Metilcelulosa , Polímeros , Cinética , Metilcelulosa/análogos & derivados , SolubilidadRESUMEN
Over the past few decades, long acting injectable (LAI) depots of polylactide-co-glycolide (PLGA) or polylactic acid (PLA) based microspheres have been developed for controlled drug delivery to reduce dosing frequency and to improve the therapeutic effects. Biopharmaceuticals such as proteins and peptides are encapsulated in the microspheres to increase their bioavailability and provide a long release period (days or months) with constant drug plasma concentration. The biodegradable and biocompatible properties of PLGA/PLA polymers, including but not limited to molecular weight, end group, lactide to glycolide ratio, and minor manufacturing changes, could greatly affect the quality attributes of microsphere formulations such as release profile, size, encapsulation efficiency, and bioactivity of biopharmaceuticals. Besides, the encapsulated proteins/peptides are susceptible to harsh processing conditions associated with microsphere fabrication methods, including exposure to organic solvent, shear stress, and temperature fluctuations. The protein/peptide containing LAI microspheres in clinical use is typically prepared by double emulsion, coacervation, and spray drying techniques. The purpose of this review is to provide an overview of the formulation attributes and conventional manufacturing techniques of LAI microspheres that are currently in clinical use for protein/peptides. Furthermore, the physicochemical characteristics of the microsphere formulations are deliberated.
Asunto(s)
Portadores de Fármacos/química , Sistemas de Liberación de Medicamentos , Microesferas , Fragmentos de Péptidos/administración & dosificación , Poliésteres/química , Copolímero de Ácido Poliláctico-Ácido Poliglicólico/química , Proteínas/administración & dosificación , Animales , Composición de Medicamentos , Humanos , Fragmentos de Péptidos/química , Proteínas/químicaRESUMEN
Exosomes as nanosized vesicles are emerging as drug delivery systems for therapeutics owing to their natural origin, their ability to mediate intercellular communication, and their potential to encapsulate various biological molecules such as proteins and nucleic acids within the lipid bilayer membrane or in the lumen. Exosomes contain endogenous components (proteins, lipids, RNA) that could be used to deliver cargoes to target cells, offering an opportunity to diagnose and treat various diseases. Owing to their ability to travel safely in extracellular fluid and to transport cargoes to target cells with high efficacy, exosomes offer enhanced delivery of cargoes in vivo. However, several challenges related to the stabilization of the exosomes, the production of sufficient amounts of exosomes with safety and efficacy, the efficient loading of drugs into exosomes, the clearance of exosomes from circulation, and the transition from the bench scale to clinical production may limit their development and clinical use. For the clinical use of exosomes, it is important to understand the molecular mechanisms behind the transport and function of exosome vesicles. This review exploits techniques related to the isolation and characterization of exosomes and their drug delivery potential to enhance the therapeutic outcome and stabilization methods. Further, routes of administration, clinical trials, and regulatory aspects of exosomes will be discussed in this review.
RESUMEN
Dose dumping is the major drawback of sustained release (SR) matrices. The current research aimed to develop the stable lipid-based SR matrices of quetiapine fumarate (QTF) using Geleol™ (glyceryl monostearate; GMS) as the lipid matrix carrier and Klucel™ EF (HPC EF), Kollidon® VA64, and Kollidon® 12PF as hydrophilic binders. Formulations were developed using advanced twin screw melt granulation (TSMG) approach and the direct compression (DC) technique. Compared with the blends of DC, the granules of TSMG exhibited improved flow properties and tabletability. Solid-state characterization by differential scanning calorimetry of the prepared granules exhibited the crystalline nature of the lipid. Fourier transform infrared spectroscopy demonstrated no interaction between the formulation ingredients. The compressed matrices of TSMG and DC resulted in the sustained release of a drug over 16-24 h. Upon storage under accelerated conditions for 6 months, the matrices of TSMG retained their sustained release characteristics with no dose dumping in alcohol, whereas the matrices of DC resulted in the dose dumping of the drug attributing to the loss of matrix integrity and phase separation of lipid. Thus, it is concluded that the uniform distribution of a softened binder into a molten lipid carrier results in the stable matrices of TSMG.
RESUMEN
In a formulation, traces of peroxides in copovidone can impact the stability of drug substances that are prone to oxidation. The present study aimed to investigate the impact of peroxides in novel Plasdone™ S630 Ultra and compare it with regular Plasdone™ S630 on the oxidative degradation of quetiapine fumarate amorphous solid dispersions prepared via hot-melt extrusion technique. The miscibility of copovidones with drug was determined using the Hansen solubility parameter, and the results indicated a miscible drug-polymer system. Melt viscosity as a function of temperature was determined for the drug-polymer physical mixture to identify the suitable hot-melt extrusion processing temperature. The binary drug and polymer (30:70 weight ratio) amorphous solid dispersions were prepared at a processing temperature of 160°C. Differential scanning calorimetry and Fourier transform infrared spectroscopy studies of amorphous solid dispersions revealed the formation of a single-phase amorphous system with intermolecular hydrogen bonding between the drug and polymer. The milled extrudates were compressed into tablets by using extragranular components and evaluated for tabletability. Stability studies of the milled extrudates and tablet formulations were performed to monitor the oxidative degradation impurity (N-oxide). The N-oxide impurity levels in the quetiapine fumarate - Plasdone™ S630 Ultra milled extrudates and tablet formulations were reduced by 2- and 3-folds, respectively, compared to those in quetiapine fumarate - Plasdone™ S630. The reduced oxidative degradation and improved hot-melt extrusion processability of Plasdone™ S630 Ultra make it a better choice for oxidation-labile drugs over Plasdone™ S630 copovidone.
Asunto(s)
Tecnología de Extrusión de Fusión en Caliente/métodos , Excipientes Farmacéuticos/síntesis química , Povidona/síntesis química , Pirrolidinas/síntesis química , Fumarato de Quetiapina/síntesis química , Compuestos de Vinilo/síntesis química , Rastreo Diferencial de Calorimetría/métodos , Química Farmacéutica/métodos , Composición de Medicamentos/métodos , Calor , Oxidación-Reducción , Excipientes Farmacéuticos/farmacocinética , Povidona/farmacocinética , Pirrolidinas/farmacocinética , Fumarato de Quetiapina/farmacocinética , Solubilidad , Espectroscopía Infrarroja por Transformada de Fourier/métodos , Compuestos de Vinilo/farmacocinéticaRESUMEN
Multicomponent crystalline solid forms (salts, cocrystals and eutectics) are a promising means of enhancing the dissolution behavior of poorly soluble drugs. The present study demonstrates the development of multicomponent solid forms of aripiprazole (ARP) prepared with succinic acid (SA) and nicotinamide (NA) as coformers using the hot melt extrusion (HME) technique. The HME-processed samples were characterized and analyzed using differential scanning calorimetry (DSC), hot stage microscopy (HSM), Fourier transform infrared (FTIR) spectroscopy, powder X-ray diffraction (PXRD) and scanning electron microscopy (SEM). The DSC and HSM analyses revealed a characteristic single melting temperature in the solid forms, which differed from the melting points of the individual components. The discernible changes in the FTIR (amide C=O stretching) and PXRD results for ARP-SA confirm the formation of new crystalline solid forms. In the case of ARP-NA, these changes were less prominent, without the appearance or disappearance of peaks, suggesting no change in the crystal lattice. The SEM images demonstrated morphological differences between the HME-processed samples and the individual parent components. The in vitro dissolution and microenvironment pH measurement studies revealed that ARP-SA showed a higher dissolution rate, which could be due to the acidic microenvironment pH imparted by the coformer. The observations of the present study demonstrate the applicability of the HME technique for the development of ARP multicomponent solid forms.
RESUMEN
Lignin is an abundant renewable natural biopolymer. Moreover, a significant development in lignin pretreatment and processing technologies has opened a new window to explore lignin and lignin-based bionanomaterials. In the last decade, lignin has been widely explored in different applications such as drug and gene delivery, tissue engineering, food science, water purification, biofuels, environmental, pharmaceuticals, nutraceutical, catalysis, and other interesting low-value-added energy applications. The complex nature and antioxidant, antimicrobial, and biocompatibility of lignin attracted its use in various biomedical applications because of ease of functionalization, availability of diverse functional sites, tunable physicochemical and mechanical properties. In addition to it, its diverse properties such as reactivity towards oxygen radical, metal chelation, renewable nature, biodegradability, favorable interaction with cells, nature to mimic the extracellular environment, and ease of nanoparticles preparation make it a very interesting material for biomedical use. Tremendous progress has been made in drug delivery and tissue engineering in recent years. However, still, it remains challenging to identify an ideal and compatible nanomaterial for biomedical applications. In this review, recent progress of lignin towards biomedical applications especially in drug delivery and in tissue engineering along with challenges, future possibilities have been comprehensively reviewed.
Asunto(s)
Sistemas de Liberación de Medicamentos , Técnicas de Transferencia de Gen , Lignina/química , Ingeniería de Tejidos , Animales , Biomasa , Humanos , Nanopartículas/química , Nanopartículas/ultraestructuraRESUMEN
Advancements in pharmaceutical technologies have led to the personalization of therapies over the last decade. Three-dimensional printing (3DP) is an emerging technique in the manufacturing of pharmaceutical dosage forms because of its potential to create complex and customized dosage forms according to the patient's needs. Among the various 3DP techniques based on different functioning mechanisms, fused deposition modeling (FDM) 3D printing is a versatile and widely used method with advantages such as precision of quantity and the ability to incorporate different fill densities. This method is also economical and easily produces complex designs. Hot-melt extrusion (HME) is an established technique in pharmaceutical manufacturing that is utilized in the development of filaments which are used as "ink roll" or feedstock material in FDM 3D printing. This review discusses the various stages involved in FDM 3D printing, including feedstock filament preparation using HME, digital dosage form designs, filament characterization, and various novel applications, and future perspectives.
Asunto(s)
Preparaciones Farmacéuticas , Impresión Tridimensional , Sistemas de Liberación de Medicamentos , Tecnología de Extrusión de Fusión en Caliente , Humanos , Tecnología FarmacéuticaRESUMEN
Fenofibrate is an effective lipid-lowering drug; however, its poor solubility and high log p (5.2) result in insufficient absorption from the gastrointestinal tract, leading to poor bioavailability. In this study, a one-step continuous twin-screw melt granulation process was investigated to improve the solubility and dissolution of fenofibrate using Gelucire® 48/16 and Neusilin® US2 as the solubilizer and surface adsorbent, respectively. The formulations (granules) were prepared at different ratios of fenofibrate, Gelucire® 48/16, and Neusilin® US2 based on phase-solubility studies and characterized using dissolution, differential scanning calorimetry, powder X-ray diffraction, and scanning electron microscopy analyses and studies on flow properties. In the phase-solubility studies, a linear relation was observed between Gelucire® 48/16 concentration and the amount of fenofibrate dissolved. In contrast, the dissolution rate of the prepared formulations was independent of the fenofibrate: Gelucire® 48/16 ratio and dependent on the Neusilin® US2 levels in the formulation. Increasing Neusilin® US2 levels decreased the rate of dissolution of the granules but improved the stability of the tablets under storage at accelerated stability conditions. Interestingly, higher Gelucire® 48/16 levels in the granules resulted in tablets with a hard matrix, which slowed disintegration and dissolution. All formulations exhibited improved dissolution compared to pure fenofibrate.
Asunto(s)
Fenofibrato/química , Tecnología Farmacéutica , Composición de Medicamentos , Estabilidad de Medicamentos , Solubilidad , ComprimidosRESUMEN
The misuse, abuse, and illicit use of prescription opioid analgesics is a global public health concern. However, there are many viable therapeutic options for the treatment of patients with chronic pain. Both intact and manipulated opioid drug products are abused by various routes such as oral, nasal, and injection, which may lead to overdose, drug addiction, and even death. To combat the abuse of these medications, regulatory agencies and pharmaceutical companies are switching their interest towards developing Abuse Deterrent Formulations (ADFs), with the intent to deter the abuse of opioid products to a maximum extent. There are several manufacturing strategies implemented in an attempt to develop ADFs. An example includes matrix tablets of high molecular weight polymers such as polyethylene oxide. The scalable and continuous manufacturing techniques, such as Hot-Melt Extrusion (HME), is increasingly accepted by pharmaceutical companies to advance the development and manufacturing of ADFs. The application of the HME technique in the development of ADFs may overcome the challenges of opioid analgesic formulation development and provide improved protection against misuse and abuse, while also ensuring access to safe and effective use in patients with chronic pain. This review deals with a brief overview of strategies, with emphasis on HME to deter opioid abuse, in vitro characterization methods, commonly used excipients in the development of ADFs, and regulatory standards to meet the requirements of ADFs.
Asunto(s)
Formulaciones Disuasorias del Abuso , Trastornos Relacionados con Opioides , Analgésicos Opioides/uso terapéutico , Química Farmacéutica , Composición de Medicamentos , Tecnología de Extrusión de Fusión en Caliente , Humanos , Trastornos Relacionados con Opioides/tratamiento farmacológico , Trastornos Relacionados con Opioides/prevención & controlRESUMEN
An industrially feasible approach to overcome the solubility and bioavailability limitations of poorly soluble active pharmaceutical ingredients is the development of amorphous solid dispersions (ASDs) using hot-melt extrusion (HME) technique. The application of Quality by Design (QbD) had a profound impact on the development of HME-based ASDs. The formulation and process optimization of ASDs manufactured via HME techniques require an understanding of critical quality attributes, critical material attributes, critical process parameters, risk assessment tools, and experimental designs. The knowledge gained from each of these QbD elements helps ensure the consistency of product quality. The selection and implementation of appropriate Design of Experiments (DoE) methodology to screen and optimize the formulation and process variables remain a major challenge. This review provides a comprehensive overview on QbD concepts in HME-based ASDs with an emphasis on DoE methodologies. Further, the information provided in this review can assist researchers in selecting a suitable design with optimal experimental conditions. Specifically, this review has focused on the prediction of drug-polymer miscibility, the elements and sequence of QbD, and various screening and optimization designs, to provide insights into the formulation and process variables that are encountered routinely in the production of HME-based ASDs.
Asunto(s)
Química Farmacéutica , Tecnología de Extrusión de Fusión en Caliente , Composición de Medicamentos , Calor , Polímeros , SolubilidadRESUMEN
Solid-state is the preferred choice for storage of protein therapeutics to improve stability and preserve the biological activity by decreasing the physical and chemical degradation associated with liquid protein formulations. Lyophilization or freeze-drying is an effective drying method to overcome the instability problems of proteins. However, the processing steps (freezing, primary drying and secondary drying) involved in the lyophilization process can expose the proteins to various stress and harsh conditions, leading to denaturation, aggregation often a loss in activity of protein therapeutics. Stabilizers such as sugars and surfactants are often added to protect the proteins against physical stress associated with lyophilization process and storage conditions. Another way to curtail the degradation of proteins due to process related stress is by modification of the lyophilization process. Slow freezing, high nucleation temperature, decreasing the extent of supercooling, and annealing can minimize the formation of the interface (ice-water) by producing large ice crystals with less surface area, thereby preserving the native structure and stability of the proteins. Hence, a thorough understanding of formulation composition, lyophilization process parameters and the choice of analytical methods to characterize and monitor the protein instability is crucial for development of stable therapeutic protein products. This review provides an overview of various stress conditions that proteins might encounter during lyophilization process, mechanisms to improve the stability and analytical techniques to tackle the proteins instability during both freeze-drying and storage.
Asunto(s)
Preparaciones Farmacéuticas/química , Proteínas/química , Adsorción , Liofilización/métodos , Congelación , Concentración de Iones de Hidrógeno , Hidrólisis , Concentración Osmolar , Oxidación-Reducción , Agregado de Proteínas , Unión Proteica , Desnaturalización Proteica , Estabilidad Proteica , Proteínas/farmacología , Proteínas/uso terapéutico , Espectroscopía Infrarroja por Transformada de Fourier , Análisis Espectral , Estrés Fisiológico , TemperaturaRESUMEN
Lyophilization is a pivotal manufacturing process to obtain a stable drug product that is unstable as a ready-to-use formulation. Some formulations may require the addition of drug-specific excipients such as stabilizers, buffers, and bulking agents to support the cake appearance and ensure long-term stability of the drug product. Optimization of the lyophilization process parameters at each stage including freezing and primary and secondary drying is important because these parameters can have a direct impact on the process efficiency (shortened cycle time) and product performance (cake appearance and homogeneous moisture content). Several parameters of the formulation, including properties of the active pharmaceutical ingredient, excipients, solvent system, and container closure, determine the success of lyophilization. Development, scale-up, and transfer of the lyophilization cycle are challenging; hence, a comprehensive understanding of the critical parameters related to the formulation, lyophilization process, and lyophilizer design allows designing a quality drug product. One approach for a successful transfer of the lyophilization cycle between the laboratory and commercial-scale lyophilizer is using vial heat transfer coefficient and ice slab test to establish a maximum sublimation rate. This review provides a general overview of the lyophilization process and discusses several key considerations and product development aspects of formulation, process optimization, container closure system, scale-up principles, and drug product quality attributes from the industrial viewpoint. Grapical abstract.