The evolution and formalization of anesthesia assistant roles across Canada.

PURPOSE: The purpose of this Special Article is to document the evolution of the anesthesia assistant (AA) profession in Canada and summarize AA practice at Canadian institutions as it exists today, five decades after Quebec and 15 years after most other provinces formalized AA practice. SOURCE: Through the Management Committee of the Association of Canadian University Departments of Anesthesia (ACUDA), we conducted a purposeful sampling of all ACUDA chairs or their delegates. We requested the following data: history of AAs becoming a reality in their particular province or region; potential recruitment pools; training programs and curricula; pathway to credentialing; funding, pay, retention, recruitment, and status of union representation; and metrics. PRINCIPAL FINDINGS: Data were provided by 19 institutions in 8 provinces: Newfoundland and Labrador, Nova Scotia, Quebec, Ontario, Manitoba, Saskatchewan, Alberta, and British Columbia. Given the different health care governance structures across the provinces, AA roles vary in terms of its associated technical, clinical, and educational responsibilities. The role of AAs in supporting anesthesia care through equipment maintenance and assistance with airway management, resuscitation, and administration of regional anesthesia seems to be well established, as is their role in providing brief intraoperative relief for anesthesiologists during a stable period of anesthesia. Anesthesia assistant duties continue to evolve, becoming more aligned with the specific institution and less dependent on the supervising anesthesiologist. Apart from the initial metrics collected during the Ontario ACT implementation pilot projects, we are not aware of any formal metrics, current or ongoing, being collected across Canada, related to either patient safety events or perioperative efficiency. CONCLUSIONS: This compilation of pan-Canadian AA data shows diverse models of practice and highlights the value to patients and the health care system as a whole of incorporating these allied professionals into the anesthesia care team (ACT). The present findings allow us to offer suggestions for consideration during discussions of retention, recruitment, program expansion, and cross-country collection of metrics and other data. We conclude by making six recommendations: 1. recognize that implementation of ACTs is a key element in solving the challenge of an increasing surgical backlog; 2. develop, or facilitate the development of, metrics and increase data-sharing nationally to enable health care authorities to better understand the importance of AAs in patient safety and perioperative efficiency; 3. develop and implement funding strategies to lower the barriers to AA training such as hospital-sponsored positions, ongoing salary support, and return-of-service arrangements; 4. ensure that salaries appropriately reflect the increased level of training and added levels of responsibility of certified AAs; 5. develop long-term strategies to ensure stable funding, recruitment and retention, and a better match between the number of AA training positions and the need for newly certified AAs; and 6. engage all stakeholders to acknowledge that AAs, as knowledgeable and specifically trained assistants, not only fulfill their defined clinical role but also contribute significantly to patient safety and clinical efficiency by assuming nondirect patient care tasks.

RéSUMé: OBJECTIF: Le but de cet article spécial est de documenter l'évolution de la profession d'assistant·e en anesthésie (AA) au Canada et de résumer la pratique des AA dans les établissements canadiens telle qu'elle existe aujourd'hui, cinquante ans après que le Québec et quinze ans après que la plupart des autres provinces ont officialisé la pratique des AA. SOURCES: Par l'entremise du Comité de gestion de l'Association canadienne universitaire des départements d'anesthésie (ACUDA), nous avons réalisé un échantillonnage ciblé de tou·tes les président·es de l'ACUDA ou de leurs délégué·es. Nous avons demandé les données suivantes : historique de la concrétisation de la profession d'AA dans leur province ou région; bassins de recrutement potentiels; programmes de formation et programmes d'études; voie d'accès à l'accréditation; financement, rémunération, rétention, recrutement et état de la représentation syndicale; et données métriques. CONSTATATIONS PRINCIPALES: Des données ont été fournies par 19 institutions dans 8 provinces : Terre-Neuve-et-Labrador, Nouvelle-Écosse, Québec, Ontario, Manitoba, Saskatchewan, Alberta et Colombie-Britannique. Compte tenu des différentes structures de gouvernance des soins de santé dans les provinces, les rôles des AA varient en termes de responsabilités techniques, cliniques et éducatives connexes. Le rôle des AA dans le soutien des soins d'anesthésie par l'entretien du matériel et l'aide à la prise en charge des voies aériennes, à la réanimation et à l'administration de l'anesthésie régionale semble bien établi, tout comme leur rôle dans la fourniture d'un bref soulagement peropératoire aux anesthésiologistes pendant une période stable d'anesthésie. Les tâches des assistant·es en anesthésie continuent d'évoluer, devenant plus alignées sur l'établissement spécifique et moins dépendantes de l'anesthésiologiste superviseur·e. À l'exception des mesures initiales recueillies dans le cadre des projets pilotes de mise en œuvre des ESA (équipes de soins en anesthésie) en Ontario, nous ne sommes au courant d'aucune mesure officielle, actuelle ou en cours, recueillie dans l'ensemble du Canada, concernant les événements liés à la sécurité des patient·es ou à l'efficacité périopératoire. CONCLUSION: Cette compilation de données pancanadiennes sur les AA présente divers modèles de pratique et souligne l'importance pour les patient·es et le système de soins de santé dans son ensemble d'intégrer ces professionnel·les connexes à l'équipe de soins d'anesthésie (ESA). Les résultats actuels nous permettent d'avancer des suggestions à prendre en compte lors des discussions sur le maintien en poste, le recrutement, l'expansion des programmes et la collecte de mesures et d'autres données à l'échelle du pays. Nous concluons en formulant six recommandations : 1. reconnaître que la mise en œuvre des ESA constitue un élément clé pour résoudre le problème de l'augmentation de l'arriéré chirurgical; 2. élaborer ou faciliter l'élaboration de mesures et accroître le partage des données à l'échelle nationale pour permettre aux autorités sanitaires de mieux comprendre l'importance des AA pour la sécurité des patient·es et l'efficacité périopératoire; 3. élaborer et mettre en œuvre des stratégies de financement pour réduire les obstacles à la formation des AA, comme les postes parrainés par les hôpitaux, le soutien salarial continu et les ententes de retour de service; 4. veiller à ce que les salaires reflètent de manière appropriée le niveau accru de formation et les niveaux de responsabilité accrus des AA certifié·es; 5. élaborer des stratégies à long terme pour assurer un financement, un recrutement et une rétention stables, ainsi qu'une meilleure adéquation entre le nombre de postes de formation des AA et le besoin de nouveaux et nouvelles AA certifié·es; et 6. inciter toutes les personnes impliquées à reconnaître que les AA, en tant qu'assistant·es compétent·es et spécialement formé·es, non seulement remplissent leur rôle clinique défini, mais contribuent également de manière significative à la sécurité des patient·es et à l'efficacité clinique en assumant des tâches de soins non directs aux patient·es.

Criteria for selection to anesthesia residency programs: a survey of Canadian anesthesia program directors.

INTRODUCTION: Applicants to specialty programs lack guidance on knowing what exactly is desired by selection committees and program directors. Anesthesia is especially opaque, given its failure to provide transparency reports nationally. This study was developed to survey Canadian anesthesia program directors about the aspects of the application package desired in an anesthesia applicant. The primary objective is to identify the preferred attributes of anesthesia applications by those mandating the selection committees. METHODS: Survey was developed via Google Surveys, and sent online over a period of two months in June and July 2020. All program directors were sent requests for filling in the survey. STATA was used for all statistical analyses. Two analyses, Mann-Whitney and ANOVA tests, were performed for comparison groups. A p < 0.05 was considered significant. RESULTS: Fourteen of seventeen (83%) Canadian anesthesia program directors completed the survey. Having done an anesthesia elective, good performance in it, and excellence of preclinical academic performance were considered among the most important aspects of the application package with the highest ranking important and smallest standard deviation. Any form of red flag was also considered an important criterion, again with little variation among program directors. The reference letters selected by the applicants were also important, with a personal relationship and well written reference being identified as most important (p < 0.05). CONCLUSIONS: An applicant who has good academic performance, having anesthesia elective experience, personal, well-written reference letters, and general activity and interests that are not necessarily anesthesia-focused would be favoured by Canadian anesthesia programs.

INTRODUCTION: Les candidats aux programmes de spécialité sont mal informés quant aux attentes des comités de sélection et des directeurs de programmes. Dans la mesure où les directions de programmes en anesthésiologie n'ont pas publié de rapports de transparence à l'échelle nationale, les attentes de ces programmes-là sont particulièrement indéchiffrables. La présente étude a été élaborée pour sonder les directeurs de programmes d'anesthésiologie au Canada sur les aspects privilégiés dans les dossiers de candidature. L'objectif principal était de dégager les éléments que ceux qui formulent les mandats des comités de sélection valorisent dans les dossiers des candidats. MÉTHODES: Au cours d'une période de deux mois, juin et juillet 2020, un sondage en ligne, élaboré par le biais de Google Surveys, a été envoyé à tous les directeurs de programmes. STATA a été utilisé pour toutes les analyses statistiques. Deux analyses, les tests de Mann-Whitney et d'ANOVA, ont été effectuées pour les groupes de comparaison. Un p<0,05 a été considéré comme significatif. RÉSULTATS: Quatorze des dix-sept (83 %) directeurs de programmes d'anesthésie au Canada ont répondu au sondage. Le fait d'avoir effectué un stage en anesthésiologie, la bonne performance dans ce stage et l'excellence de la performance académique au pré-externat sont considérés comme les aspects les plus importants du dossier de candidature, avec les cotes les plus importantes et l'écart-type est le plus étroit. La présence d'un signal d'alerte se dégage également comme un critère important, là encore avec peu de variation entre les directeurs de programme. Les lettres de recommandation fournies, où la qualité de la rédaction et le fait de laisser transparaître une relation personnelle avec le candidat, sont également déterminantes (p<0,05). CONCLUSIONS: Les programmes d'anesthésie au Canada favoriseraient les candidats qui ont un bon rendement académique, une expérience de stage en anesthésie, des lettres de recommandation bien rédigées dont l'auteur connaît le candidat de façon personnelle, et les candidats qui ont des activités et des intérêts généraux sans lien avec l'anesthésiologie.

Report of two cases of endobronchial tumour mass resection in children.

PURPOSE: Anesthesia for endotracheal tumour mass resection in pediatric patients is a rare, complex, and high-risk procedure. The purpose of this case report is to emphasize the importance of multidisciplinary team collaboration and close communication during the perioperative management of shared airway surgery. CLINICAL FEATURES: A six-year-old boy with no previous history of comorbidity and a 13-yr-old boy with a six-month history of upper respiratory tract infection, refractory asthma, chronic wheeze, and exercise-related dyspnea presented for acute endobronchial tumour mass resection. Decreased pulmonary function, religious beliefs (Jehovah's Witness), risk of intraluminal bleeding, and imminent complete airway collapse constitute areas of specific interest. CONCLUSION: Anesthesia for endotracheal tumour mass resection in pediatric patients is a rare, complex, and high-risk procedure. Decreased pulmonary function and low respiratory reserves combined with the need for extensive surgical airway access warrants multidisciplinary team collaboration and close communication. Maintaining spontaneous respiration is paramount to reduce the risk of hypoxemia-induced adverse events and preoperative considerations should include the possible need for extracorporeal membrane oxygenation. Finally, the use of nasal high flow for shared airway surgery shows promising prospects warranting further investigation.

RéSUMé: OBJECTIF: L'anesthésie pour la résection de masse tumorale endotrachéale chez les patients pédiatriques est une intervention à la fois rare, complexe, et à haut risque. L'objectif de cette présentation de cas est de souligner l'importance de la collaboration multidisciplinaire et d'une bonne communication entre les équipes pendant la prise en charge périopératoire d'une chirurgie sur des voies aériennes partagées. ÉLéMENTS CLINIQUES: Un garçon de six ans sans antécédents et un garçon de 13 ans avec des antécédents de six mois d'infection des voies respiratoires supérieures, d'asthme réfractaire, de respiration sifflante (wheeze) chronique, et de dyspnée liée à l'exercice, se sont présentés pour une résection semi-urgente d'une masse tumorale endobronchique. Une réduction de la fonction pulmonaire, les croyances religieuses (témoins de Jéhovah), le risque de saignement intraluminal, et l'imminence d'un collapsus complet des voies aériennes étaient les domaines d'intérêt spécifique. CONCLUSION: L'anesthésie pour la résection de masse tumorale endotrachéale chez les patients pédiatriques est une intervention à la fois rare, complexe, et à haut risque. Une fonction pulmonaire réduite et des réserves respiratoires diminuées, combinées au besoin d'un accès chirurgical étendu aux voies aériennes, nécessitent une collaboration multidisciplinaire et une excellente communication entre les équipes. Il est essentiel de maintenir la respiration spontanée pour réduire le risque d'événements indésirables induits par l'hypoxémie, et les considérations préopératoires devraient inclure le besoin possible d'oxygénation extracorporelle (ECMO). En conclusion, l'utilisation d'une lunette à haut débit nasal pour la chirurgie sur des voies aériennes partagées est prometteuse, justifiant des études plus approfondies.

Laser all-ceramic crown removal-a laboratory proof-of-principle study-phase 1 material characteristics.

BACKGROUND AND OBJECTIVES: The removal of all-ceramic crowns is a time consuming and destructive procedure in the dental office. The removal of all-ceramic crowns using Er:YAG lasers has not been previously described in the scientific literature. The objective of this laboratory proof-of-principle study was to evaluate whether with regards to absorption and transmission characteristics of bonding cements and ceramics all-ceramic crowns can be removed from natural teeth using an Erbium laser. STUDY DESIGN/MATERIALS AND METHODS: The Fourier Transform Infrared Spectroscopy (FTIR) was used on flat ceramic samples (IPS Empress Esthetic (EE), E.max CAD, and E.max ZirCAD) to assess which infrared laser wavelengths transmit through the ceramics. Additionally, FTIR spectra for four bonding cements (Variolink Veneer, Variolink II, Multilink Automix, and SpeedCEM) were obtained. The Er:YAG laser energy transmission (wavelength 2,940 nm, 10 Hz repetition rate, pulse duration 100 µs at 126 mJ/pulse to 300 µs at 508 mJ/pulse) through different ceramic thicknesses was measured. Ablation thresholds for bonding cements were determined. Cement samples were directly irradiated or laser light was transmitted through ceramic samples. RESULTS: While the ceramics did not show any characteristic water absorption bands in the FTIR, all bonding cements showed a broad H2 O/OH absorption band. Some cements exhibited a distinct absorption peak at the Er:YAG laser emission wavelength. Depending on the ceramic thickness, EE and E.max CAD ceramics transmitted between 21 and 60% of the incident Er:YAG energy, with E.max CAD transmitting more energy than EE at comparable thicknesses. In contrast, E.max ZirCAD transmitted only 5-10% of the incident energy. Initial signs of cement deterioration occurred at 1.3-2.6 J/cm(2) . Multilink Automix, SpeedCEM, and Variolink II started ablation at 4.4-4.7 J/cm(2) . Variolink Veneer needed 44% less energy for ablation. CONCLUSION: Er:YAG laser energy can be transmitted through all-ceramic materials and those transmitted energies are sufficient for ablation of bonding cements.

Laser all-ceramic crown removal-a laboratory proof-of-principle study-phase 2 crown debonding time.

BACKGROUND AND OBJECTIVES: The removal of all-ceramic crowns is a time consuming procedure in the dental office. Little research has been done in alternative removal techniques for all-ceramic crowns. The objective of the second phase of this proof-of-principle laboratory pilot study was to evaluate whether Ivoclar Vivadent all-ceramic crowns can be efficiently removed from natural teeth without damage to the underlying tooth structure using an Erbium laser. STUDY DESIGN/MATERIALS AND METHODS: The ceramic materials used were IPS E.max CAD Lithium-disilicate (LS2 ) (E.max CAD) and IPS E.max ZirCAD Zirconium-oxide (ZrO2 ) (ZirCAD) (Ivoclar, Vivadent, Liechtenstein). Molars, either as stand-alone teeth or placed in an artificial row of teeth, were prepared to receive all-ceramic crowns. Copings and full contour crowns with either featheredge or regular margins were produced. The all-ceramic crowns were bonded to the teeth with Ivoclar Multilink Automix. The time for Er:YAG laser debonding of each crown was then measured. The Er:YAG (LiteTouch, Syneron, Yokneam, Israel) was used with an 1,100 µm diameter fiber tip with energies up to 600 mJ per pulse (wavelength 2,940 nm, 10 Hz repetition rate, pulse duration 100 µs at 126 mJ/pulse, and 400 µs at 590 mJ/pulse). The irradiation was applied at a distance of 10 mm from the crown surface following a defined pattern. Air-water spray was applied to the crowns at a rate of 67 ml/minute. RESULTS: All of the all-ceramic crowns were successfully debonded with the laser. On average, an all-ceramic E.max CAD crown was debonded in 190 ± 92 seconds (average ± SD). The debonding time for ZirCAD featheredge crowns was 226 ± 105 seconds and for ZirCAD crowns with regular margins it was 312 ± 102 seconds. No crowns fractured and no damage to the underlying dentin was detected. The bonding cement deteriorated due to the Er:YAG irradiation. Additionally, no carbonization at the dentin/cement interface was observed. CONCLUSION: Er:YAG laser energy can successfully be used to efficiently debond all-ceramic full contour crowns from natural teeth without damage to the underlying tooth structure. Lasers Surg. Med. 46:636-643, 2014. © 2014 Wiley Periodicals, Inc.

Er:YAG laser debonding of porcelain veneers.

BACKGROUND AND OBJECTIVES: The removal of porcelain veneers using Er:YAG lasers has not been previously described in the scientific literature. This study was designed to systematically investigate the efficacy of an Er:YAG laser on veneer debonding, possibly without damage to the underlying tooth, and preservation of the veneer integrity. STUDY DESIGN/MATERIALS AND METHODS: The Fourier Transform Infrared Spectroscopy was used on 10 flat veneer samples (IPS Empress Esthetic, e.max Press HT) to assess which infrared laser wavelengths transmits through a veneer. Additionally, Fourier Transform Infrared (FTIR) spectra for a bonding cement (RelyX) were obtained. Consequently, Er:YAG laser energy transmission (wavelength 2,940 nm, 10 Hz repetition rate, pulse duration 100 µseconds at 133 mJ/pulse) through different veneer thicknesses was measured. Twenty-four veneers were bonded to freshly extracted and prepared incisors. The energy necessary for debonding was determined and then the veneers were debonded with the laser. Time needed for total debonding was measured and possible damage to the underlying tooth structure was assessed by light microscopy. RESULTS: While the veneer materials did not show any characteristic water absorption bands in the FTIR, the bonding cement showed a broad H(2) O/OH absorption band. The veneers transmitted between 11.5% and 43.7% of the incident Er:YAG energy with Emax transmitting twice the energy as EE at comparable thicknesses. Initial signs of cement ablation occurred at 1.8-4.0 J/cm(2) with the fiber tip positioned at a distance of 3-6 mm from the veneer surface and 133 mJ output energy. All 24 bonded veneers were completely removed with an average removal time of 113 ± 76 seconds. Underlying tooth structure was not damaged. The debonding mainly occurred at the cement/veneer interface. None of the Emax veneers fractured during debonding, while 36% of the EE did. CONCLUSION: Er:YAG laser irradiation effectively debonds porcelain veneers while preserving tooth structure. Maintaining veneer integrity possibly depends on the flexure strength of the veneer porcelain.

The emergence of patterned movement during late embryogenesis of Drosophila.

Larval behavioral patterns arise in a gradual fashion during late embryogenesis as the innervation of the somatic musculature and connectivity within the central nervous system develops. In this paper, we describe in a quantitative manner the maturation of behavioral patterns. Early movements are locally restricted "twitches" of the body wall, involving single segments or parts of segments. These twitches occur at a low frequency and have low amplitude, reflecting weak muscle contractions. Towards later stages twitches increase in frequency and amplitude and become integrated into coordinated movements of multiple segments. Most noticeable among these is the peristaltic wave of longitudinal segmental contractions by which the larva moves forward or backward. Besides becoming more complex as development proceeds, embryonic movements also acquire a pronounced rhythm. Thus, late embryonic movements occur in bursts, with phases of frequent movement separated by phases of no movement at all; early movements show no such periodicity. These data will serve as a baseline for future studies that address the function of embryonic lethal genes controlling neuronal connectivity and larval behavior. We have analyzed behavioral abnormalities in two embryonic lethal mutations with severe neural defects, tailless (tll), which lacks the protocerebrum, and glial cells missing (gcm), in which glial cells are absent. Our results reveal prominent alterations in embryonic motility for both of these mutations, indicating that the protocerebrum and glial cells play a crucial role in the neural mechanism controlling larval movement in Drosophila.