Electrochemical Reduction of Oxygen in Aprotic Ionic Liquids Containing Metal Cations: A Case Study on the Na-O2 system.

Metal-air batteries are intensively studied because of their high theoretical energy-storage capability. However, the fundamental science of electrodes, electrolytes, and reaction products still needs to be better understood. In this work, the ionic liquid N-butyl-N-methylpyrrolidinium bis(trifluoromethanesulfonyl)imide (PYR14TFSI) was chosen to study the influence of a wide range of metal cations (Mn+ ) on the electrochemical behavior of oxygen. The relevance of the theory of Lewis hard and soft acids and bases to predict satisfactorily the reduction potential of oxygen in electrolytes containing metal cations is demonstrated. Systems with soft and intermediate Mn+ acidity are shown to facilitate oxygen reduction and metal oxide formation, whereas oxygen reduction is hampered by hard acid cations such as sodium and lithium. Furthermore, DFT calculations on the energy of formation of the resulting metal oxides rationalize the effect of Mn+ on oxygen reduction. A case study on the Na-O2 system is described in detail. Among other things, the Na+ concentration of the electrolyte is shown to control the electrochemical pathway (solution precipitation vs. surface deposition) by which the discharge product grows. All in all, fundamental insights for the design of advanced electrolytes for metal-air batteries, and Na-air batteries in particular, are provided.

Colorless to Neutral Color Electrochromic Devices Based on Asymmetric Viologens.

Electrochromic materials have extensively been investigated because of their potential fields of application, with a significant growing interest in expanding the provided colorations. However, among all palette of colors, colorless electrochromic devices (ECDs) that provide neutral-grayish colorations with a simple configuration remain a key challenge. The present study reports on the synthesis of asymmetrically 1-alkyl-1'-aryl-substituted viologens and their incorporation in PVA-borax gel polyelectrolytes for ECDs that constitute the simplest device architecture (glass/TCO/EC gel/TCO/glass). We demonstrate herein that these EC gels based on single asymmetric viologens provide more neutral-colored state than their corresponding symmetric viologens (a* and b* ≤ |15|), while maintaining satisfactory colorless bleached state (%Tb > 70% in the whole visible range), transmittance changes (i.e., ∼60%) and cyclability (i.e., ∼15 000 cycles). Additionally, the effect of the solvent on the observed coloration has also been investigated. This easy-to-make neutral-grayish color ECDs may significantly extend the potential of the electrochromic technology, because they adapt better aesthetically to the surrounding environment, as they are easier to implement in different applications.

Electron Transport Layer-Free Solar Cells Based on Perovskite-Fullerene Blend Films with Enhanced Performance and Stability.

The solution processing of pinhole-free methylammonium lead triiodide perovskite-C70 fullerene (MAPbI3 :C70 ) blend films on fluorine-doped tin oxide (FTO)-coated glass substrates is presented. Based on this approach, a simplified and robust protocol for the preparation of efficient electron-transport layer (ETL)-free perovskite solar cells is described. Power conversion efficiency (PCE) of 13.6 % under AM 1.5 G simulated sunlight is demonstrated for these devices. Comparative impedance spectroscopy and photostability analysis of the MAPbI3 :C70 and single MAPbI3 films compared with conventional compact TiO2 ETL-based devices are shown. The beneficial impact of using MAPbI3 :C70 blend films is emphasized.

Multicolor Electrochromics: Rainbow-Like Devices.

Stimuli-responsive reversible coloration-change materials represent a highly demanded type of smart systems useful for a wide variety of applications, with a significant growing interest in multicolor abilities. In particular, electrochromic materials have received a great deal of attention due to their versatility and broad range of industrial uses. However, most of the existing electrochromic technologies provide a single coloration, while achieving multiple colors based on simple approaches remains a challenge. The present article reports on PVA gel-based electrochromic devices, containing a single viologen, providing a colorless and two different well-defined colored states. The successful fabrication of a device, based on two viologens (multi-EC gel) with a simple architecture (glass/TCO/multi-EC gel/TCO/glass), with five different multiswitchable colors based on four-zoned electrodes (rainbow-like ECD) is also demonstrated. This novel easy-to-make multichromic system represents a significant breakthrough toward the generation of full-color devices, expanding the potential of electrochromic technology.

Efficient Regular Perovskite Solar Cells Based on Pristine [70]Fullerene as Electron-Selective Contact.

[70]Fullerene is presented as an efficient alternative electron-selective contact (ESC) for regular-architecture perovskite solar cells (PSCs). A smart and simple, well-described solution processing protocol for the preparation of [70]- and [60]fullerene-based solar cells, namely the fullerene saturation approach (FSA), allowed us to obtain similar power conversion efficiencies for both fullerene materials (i.e., 10.4 and 11.4 % for [70]- and [60]fullerene-based devices, respectively). Importantly, despite the low electron mobility and significant visible-light absorption of [70]fullerene, the presented protocol allows the employment of [70]fullerene as an efficient ESC. The [70]fullerene film thickness and its solubility in the perovskite processing solutions are crucial parameters, which can be controlled by the use of this simple solution processing protocol. The damage to the [70]fullerene film through dissolution during the perovskite deposition is avoided through the saturation of the perovskite processing solution with [70]fullerene. Additionally, this fullerene-saturation strategy improves the performance of the perovskite film significantly and enhances the power conversion efficiency of solar cells based on different ESCs (i.e., [60]fullerene, [70]fullerene, and TiO2 ). Therefore, this universal solution processing protocol widens the opportunities for the further development of PSCs.

Functionalization of Cellulose Nanocrystals in Choline Lactate Ionic Liquid.

Cellulose nanocrystals (CNCs) are valuable nanomaterials obtained from renewable resources. Their properties make them suitable for a wide range of applications, including polymer reinforcement. However, due to their highly hydrophilic character, it is necessary to modify their surface with non-polar functional groups before their incorporation into a hydrophobic polymer matrix. In this work, cellulose nanocrystals were modified using a silane coupling agent and choline lactate, an ionic liquid derived from renewable resources, as a reaction medium. Modified cellulose nanocrystals were characterized by infrared spectroscopy, showing new peaks associated to the modification performed. X-ray diffraction was used to analyze the crystalline structure of functionalized cellulose nanocrystals and to optimize the amount of silane for functionalization. Poly(lactic acid) (PLA) nanocomposites containing 1 wt % of functionalized cellulose nanocrystals were prepared. They were characterized by field-emission scanning electron microscopy (FE-SEM) and mechanical tests. The use of choline lactate as reaction media has been shown to be an alternative method for the dispersion and silanization of the cellulose nanocrystals without the addition of an external catalyst.

Injectable and Self-Healing Dynamic Hydrogels Based on Metal(I)-Thiolate/Disulfide Exchange as Biomaterials with Tunable Mechanical Properties.

Despite numerous strategies involving dynamic covalent bonds to produce self-healing hydrogels with similar frequency-dependent stiffness to native tissues, it remains challenging to use biologically relevant thiol/disulfide exchange to confer such properties to polymeric networks. Herein, we report a new method based on Metal(I) [Au(I) or Ag(I)] capping to protect thiolates from aerial oxidation without preventing thiolate/disulfide exchange. Dynamic hydrogels were readily prepared by injecting simultaneously aqueous solutions of commercially available HAuCl4 and 4-arm thiol-terminated polyethylene glycol [(PEGSH)4], resulting in a network containing a mixture of Au(I)-thiolate (Au-S) and disulfide bonds (SS). While the dynamic properties of the hydrogel were closely dependent on the pH, the mechanical properties could be easily tuned by adjusting (PEGSH)4 concentration and amount of Au-S, as judged by dynamic rheology studies. Permanent Au-S/SS exchange at physiological pH conferred self-healing behavior and frequency-dependent stiffness to the hydrogel. In addition, in vitro studies confirmed that Au-based dynamic material was not cytotoxic to human dermal fibroblasts, demonstrating its potential use as a medical device. Dynamic hydrogels obtained using Ag(I) ions demonstrated that the exchange reaction was not affected by the nature of the Metal(I) capping. Finally, this efficient thiolate capping strategy offers a simple way to produce injectable and self-healing dynamic hydrogels from virtually any thiol-containing polymers.

Graphitized carbon nanofiber-Pt nanoparticle hybrids as sensitive tool for preparation of screen printing biosensors. Detection of lactate in wines and ciders.

This work describes the fabrication of a new lactate biosensor. The strategy is based on the use of a novel hybrid nanomaterial for amperometric biosensors i.e. platinum nanoparticles (PtNps) supported on graphitized carbon nanofibers (PtNps/GCNF) prepared by chemical reduction of the Pt precursor at GCNF surfaces. The biosensors were constructed by covalent immobilization of lactate oxidase (LOx) onto screen printed carbon electrodes (SPCEs) modified with PtNps (PtNps/GCNF-SPCEs) using polyethyleneimine (PEI) and glutaraldehyde (GA). Experimental variables concerning both the biosensor design and the detection process were investigated for an optimal analytical performance. Lactate biosensors show good reproducibility (RSD 4.9%, n=10) and sensitivity (41,302±546) µA/Mcm(2), with a good limit of detection (6.9µM). Covalent immobilization of the enzyme allows the reuse of the biosensor for several measurements, converting them in a cheap alternative to the solid electrodes. The long-term stability of the biosensors was also evaluated. 90% of the signal was kept after 3months of storage at room temperature (RT), while 95% was retained after 18months at -20°C. These results demonstrate that the method provides sensitive electrochemical lactate biosensors where the stability of the enzymatic activity can be preserved for a long period of time in adequate storage conditions.

Aurophilically cross-linked "dynamic" hydrogels mimicking healthy synovial fluid properties.

We report a new supramolecular dynamic hydrogel, based on a new concept of reversible aurophilic cross-linkers, mimicking the rheological behaviour of healthy synovial fluid under physiological conditions with good cell viability.

Facile and scalable synthesis of nanoporous materials based on poly(ionic liquid)s.

A simple, fast, sustainable, and scalable strategy to prepare nanoporous materials based on poly(ionic liquid)s (PILs) is presented. The synthetic strategy relies on the radical polymerization of crosslinker-type ionic liquid (IL) monomers in the presence of an analogous IL, which acts as a porogenic solvent. This IL can be extracted easily after polymerization and recycled for further use. The great advantages of this synthetic approach are the atom-efficiency and lack of waste. The effects of different monomer/porogen ratios on the specific surface area, porosity, and pore size have been investigated. Finally, the potential of the materials as CO2 sorbents has been evaluated.

Flexible viologen electrochromic devices with low operational voltages using reduced graphene oxide electrodes.

Reduced graphene oxide (RGO) films have been electrodeposited on indium tin oxide-coated polyethylene terephthalate (ITO-PET) substrates from graphene oxide (GO) solutions, and the resulting flexible transparent electrodes have been used in electrochromic devices of ethyl viologen (EtV(2+)). The electrochromic performance of devices with bare ITO-PET electrodes and ITO-PET coated with RGO has been compared. Under continuous cycling tests up to large voltages, the RGO film was oxidized and dispersed in the electrochromic mixture. The resulting devices, which contained GO and RGO in the electrochromic mixture, showed lower switching voltages between the colored and bleached states. This electrocatalytic activity of the solution-phase GO/RGO pair toward the electrochemical reaction of the electrochromic redox couple (the dication EtV(2+) and the radical cation EtV(+•)) allowed devices with an optical contrast higher than the contrast of those free of GO at the same applied voltage.

Innovative pressure sensor platform and its integration with an end-user application.

This paper describes the fully integration of an innovative and low-cost pressure sensor sheet based on a bendable and printed electronics technology. All integration stages are covered, from most low-level functional system, like physical analog sensor data acquisition, followed by embedded data processing, to end user interactive visual application. Data acquisition embedded software and hardware was developed using a Rapid Control Prototyping (RCP). Finally, after first electronic prototype successful testing, a Taylor-made electronics was developed, reducing electronics volume to 3.5 cm × 6 cm × 2 cm with a maximum power consumption of 765 mW for both electronics and pressure sensor sheet.

Disposable amperometric biosensor based on lactate oxidase immobilised on platinum nanoparticle-decorated carbon nanofiber and poly(diallyldimethylammonium chloride) films.

A novel biosensor for lactate has been developed, using screen-printed carbon electrodes (SPCE) and lactate oxidase (LOx). The active surface of the electrodes was modified using a dispersion of platinum nanoparticle decorated carbon nanofibers (PtNp-CNF) in poly(diallyldimethylammonium) chloride (PDDA) solution. In this way, sensitive, disposable, low cost and reliable hydrogen peroxide sensors were obtained. The immobilisation of LOx on top of these PtNp-CNF-PDDA/SPCEs resulted in amperometric biosensors with high operational stability. The sensitivity of the optimised lactate biosensor was 36.8 (mA/Mcm(2)) with a linear range of 25-1500 µM. The limit of detection was 11 µM (S/N=3). Reproducibility, selectivity and storage stability were also evaluated. Additionally, the stability of the biosensor was also predicted by a model based on thermal degradation. Finally, lactate in sweat and blood samples was determined in a sport test using LOx/PtNp-CNF-PDDA/SPCEs and commercial biosensors respectively. Based on these data, the validity of the sweat lactate for the determination of the lactate threshold is discussed.

Frequency and Temperature Dependence of Fabrication Parameters in Polymer Dispersed Liquid Crystal Devices.

A series of polymer dispersed liquid crystal devices using glass substrates have been fabricated and investigated focusing on their electrical properties. The devices have been studied in terms of impedance as a function of frequency. An electric equivalent circuit has been proposed, including the influence of the temperature on the elements into it. In addition, a relevant effect of temperature on electrical measurements has been observed.

Room temperature self-healing power of silicone elastomers having silver nanoparticles as crosslinkers.

Thiol-functionalised silicone-oils were crosslinked with silver nanoparticles to give mechanically consistent elastomers with high self-healing power. The materials were broken into small pieces and put together in intimate contact for 24 hours at room temperature, observing a complete macroscopic healing and a quantitative recovery of compression-stress and strain.

Single-chain polymer nanoparticles.

The synthesis of polymer nanoparticles (NPs) with controlled characteristics has become an appealing research topic lately. Nanomedicine, and especially drug delivery and imaging, are fields that require particles of a controlled size and with a tailored arrangement of functional groups. Intramolecular cross-linking or collapse of single polymer chains has emerged as an efficient alternative for the synthesis of well-defined polymer NPs. This technique allows the generation of 1.5-20 nm particles with a wide variety of chemical compositions and functionalities. This review begins by gathering synthetic strategies described in the literature and groups them into four main synthetic methods: homo-functional collapse, hetero-functional collapse, crosslinker-mediated collapse, and one-block collapse of diblock or triblock copolymers. Afterwards, the main characterization techniques and physical properties of single-chain polymer NPs (SCPNs) are exposed. Finally, several applications in nanomedicine are mentioned followed by some future perspectives.

A sulfide/polysulfide-based ionic liquid electrolyte for quantum dot-sensitized solar cells.

Further development of quantum dot-sensitized solar cells (QDSCs) will require long-term stability in addition to the continuous increase of photovoltaic (PV) conversion efficiency achieved in the last years. We report a robust S(2-)/S(n)(2-) electrolyte that has been specifically designed for compatibility with CdSe quantum dots in sensitized solar cells. The new pyrrolidinium ionic liquid reaches 1.86% efficiency and a short-circuit current close to 14 mA·cm(-2) under air-mass 1.5 global illumination and improves the device lifetime with good photoanode stability over 240 h. PV characterization showed that the solar cell limitations relate to poor catalysis of regeneration at the counter electrode and high recombination. Further improvement of these factors in the robust electrolyte configuration may thus have a significant impact for advancing the state-of-the-art in QDSCs.

Electrochemical reduction of O2 in 1-butyl-1-methylpyrrolidinium bis(trifluoromethanesulfonyl)imide ionic liquid containing Zn2+ cations: deposition of non-polar oriented ZnO nanocrystalline films.

The influence of the Zn(2+) concentration and temperature on the electrochemical reduction of O(2) in a solution of zinc bis(trifluoromethanesulfonyl)imide (Zn(TFSI)(2)) salt in 1-butyl-1-methylpyrrolidinium bis(trifluoromethanesulfonyl)imide (PYR(14)TFSI) ionic liquid is presented. ZnO nanocrystalline films were then electrodeposited, under enhanced O(2) reduction, at temperatures in the 75-150 °C range. Their morphology, chemical composition, structural and optical properties were analyzed. In contrast to the polar-oriented ZnO usually obtained from aqueous and conventional solvent based electrolytes, nanocrystalline films oriented along non-polar directions, (11 ̅10) and (11 ̅20), were obtained from this ionic liquid electrolyte. A significant content of carbon was detected in the films, pointing to the active participation and crucial effect of pyrrolidinium cation (and/or byproducts) during the electrodeposition. The films showed semiconducting behavior with an optical gap between 3.43 and 3.53 eV as measured by optical transmittance. Their room temperature photoluminescence spectra exhibited two different bands centered at ∼3.4 and ∼2.2 eV. The intensity ratio between both bands was found to depend on the deposition temperature. This work demonstrates the great potential of ionic liquids based electrolytes for the electrodeposition of ZnO nanocrystalline thin films with innovative microstructural and optoelectronic properties.

Designing neutral metallophilic hydrogels from di- and tripeptides.

Here we report the metallophilic attraction driven gel-forming capability of four cysteine-containing short peptides at neutral pH. Such peptides were designed to have an isoelectric point (pI) close to 7, aided by the introduction of an arginine unit with its highly basic guanidinium group.

Nanostructured disposable impedimetric sensors as tools for specific biomolecular interactions: sensitive recognition of concanavalin A.

The development of sensors to detect specific weak biological interactions is still today a challenging topic. Characteristics of carbohydrate-protein (lectin) interactions include high specificity and low affinity. This work describes the development of nanostructured impedimetric sensors for the detection of concanavalin A (Con A) binding to immobilized thiolated carbohydrate derivatives (D-mannose or D-glucose) onto screen-printed carbon electrodes (SPCEs) modified with gold nanoparticles. Thiolated D-galactose derivative was employed as negative control to evaluate the selectivity of the proposed methodology. After binding the thiolated carbohydrate to the nanostructured SPCEs, different functionalized thiols were employed to form mixed self-assembled monolayers (SAM). Electrochemical impedance spectroscopy (EIS) was employed as a technique to evaluate the binding of Con A to selected carbohydrates through the increase of electron transfer resistance of the ferri/ferrocyanide redox probe at the differently SAM modified electrodes. Different variables of the assay protocol were studied in order to optimize the sensor performance. Selective Con A determinations were only achieved by the formation of mixed SAMs with adequate functionalized thiols. Important differences were obtained depending on the chain lengths and functional groups of these thiols. For the 3-mercapto-1-propanesulfonate mixed SAMs, the electron transfer resistance varied linearly with the Con A concentration in the 2.2-40.0 µg mL(-1) range for D-mannose and D-glucose modified sensors. Low detection limits (0.099 and 0.078 pmol) and good reproducibility (6.9 and 6.1%, n=10) were obtained for the D-glucose and D-mannose modified sensors, respectively, without any amplification strategy.