Comparison of young femoral neck fractures treated by femoral neck system, multiple cancellous screws and dynamic hip screws: a retrospectively comparison study.

BACKGROUND: Implant choice for the fixation of femoral neck fracture is one of the most important management controversies. This study aims to evaluate and compare the short-term outcomes associated with the use of the Femoral Neck System (FNS), Multiple Cancellous Screws (MCS), and Dynamic Hip Screws (DHS) in treating femoral neck fractures in a young patient population. METHODS: From June 2018 to June 2021, a total of 120 surgeries for a primary femoral neck fracture were retrospectively analyzed. This review encompassed demographic details of the patients and the mechanisms behind the injuries. Key surgical parameters such as operation duration, intraoperative blood loss, fluoroscopy duration, and hospital stay were meticulously documented. The employed surgical technique was described. All patients were followed up at 6 weeks, 3 months, 6 months, and 12 months postoperatively. Avascular necrosis of the femoral head (AVN), nonunion, malreduction, implant failure or other complications were noted. The functional status at the last follow-up was assessed using the Harris functional scoring criteria. RESULTS: There were 90 males and 30 females, with a mean age of 40.4 years. As to patient characteristics, there were no significant differences between the three groups. DHS group showed longer operation time(52.15 ± 4.80 min), more blood loss(59.05 ± 5.87 ml) and longer time of hospitalization(7.6 ± 0.90 d) than FNS group (39.65 ± 2.84 min, 45.33 ± 9.63 ml and 4.87 ± 0.48 d) and MCS group (39.45 ± 3.10 min, 48.15 ± 7.88 ml and 5.04 ± 0.49 d) (p < 0.05). In addition, the time of fluoroscopy in FNS group (15.45 ± 3.67) was less than that in MCS group (26.3 ± 4.76) and DHS group (27.1 ± 5.67) (p < 0.05). The cost of FNS group(44.51 ± 2.99 thousand RMB) was significantly higher than the MCS and DHS groups. The FNS, MCS and DHS groups showed a similar mean length of femoral neck shortening (LFNS) and Harris score. The FNS, MCS and DHS groups showed a similar mean rate of AVN and internal fixation failure. CONCLUSIONS: Following successful fracture reduction, FNS, MCS, and DHS are effective for in the young femoral neck fractures. No difference was found in complications between the three groups. However, the reduced fluoroscopy time associated with FNS contributes to shorter operation durations. The adoption of minimally invasive techniques correlates with decreased blood loss and shorter hospital stays. Nevertheless, these advantages may be offset by the potential economic burden they impose.

Progress in the study of mechanisms and pathways related to the survival of random skin flaps.

The clinical application of random flaps in wound repair has been a topic of discussion. Random flaps are prone to necrosis due to the lack of well-defined vascular blood supply during transfer surgery. Their clinical utility is restricted, financial and psychological burdens is imposed on patients due to this limitation. The survival of random skin flaps depends on factors such as ischemia-reperfusion injury, oxidative stress, local inflammatory response, and neovascularization. This review aims to provide an overview of the evidence supporting the use of random flaps in clinical practice. In addition, this review explores the impact of different medications on signaling pathways within the flap's local microcirculation and investigates the interconnections between these pathways.

Comparison of ESIN and other minimally invasive techniques for anterior pelvic ring injury: a finite element analysis and case-control study.

OBJECT: A novel technique, percutaneous elastic stable intramedullary nail fixation (ESIN), proposed by our team for the treatment of anterior pelvic ring injury. Finite element analysis and retrospective case-control study were used to compare biomechanical properties and clinical outcomes between ESIN and other techniques. METHODS: Four groups of finite element models of pelvic anterior ring injury were simulated, including ESIN (model A), retrograde transpubic screw fixation (RTSF, model B), subcutaneous internal fixator (model C), and external fixator (model D), and a vertical downward load of 500 N was applied to the S1 vertebral endplate. Stress and displacement distributions of intact pelvis, displacement distributions of pubic fracture fragments, and stress distributions of fixation devices were analysed. Then 31 patients with anterior pelvic ring injury (15 in the ESIN group and 16 in the RTSF group) were reviewed. Clinical outcomes were evaluated at the final follow-up. Postoperative complications were also recorded. RESULTS: Under 500N loading, the intact stability of the pelvis was compared as follows: model B (20.58 mm, 121.82 MPa), model A (20.80 mm, 129.97 MPa), model C (22.02 mm, 141.70 MPa), and model D (22.57 mm, 147.06 MPa). The regional stability of superior pubic ramus was compared as follows: model B (9.48 mm), model A (10.16 mm), model C (10.52 mm), and model D (10.76 mm). All 31 patients received follow-up at least 12 months postsurgery (range 12-20 months). Age, sex, injury mechanism, fracture type, time between the injury and operation, American Society of Anesthesiologists score, intraoperative blood loss, hospital stay, follow-up period, time to union, and Majeed scores did not differ significantly between the two groups ( P >0.05). However, the differences in the duration of unilateral surgery, unilateral intraoperative fluoroscopy and one-time success rate were significant ( P <0.05). CONCLUSIONS: With sufficient biomechanical stability and minimally invasive advantage, the percutaneous technique using ESIN can be used to successfully treat anterior pelvic ring injuries. In addition, advantages over RTSF include a shorter duration of surgery, reduced requirement for intraoperative fluoroscopy, and a higher one-time success rate. ESIN therefore constitutes a good alternative to RTSF.

Reconstruction of foot and ankle defects using the vaccum sealing drainage versus the induced-membrane the elderly: A retrospective comparative study.

The purpose of this study was to compare the reconstructive outcomes of soft-tissue defects around foot and ankle with vaccum sealing drainage (VSD) or induction membrane (IM) of cement formation and attempt to provide an optimal strategy for elderly patients. A retrospective review of all continuous patients with foot and ankle reconstruction using different flaps from October of 2016 and October of 2020 was performed. Based on the different way, the patients were divided into two groups: VSD group (n = 26) and IM group (n = 27). Outcomes were assessed according to the size of the defect, frequency of debridement procedures, hospitalization time, duration of healing, the healing rate, major amputation rate, functional outcomes and complications. Immunohistochemistry (IHC) detection of vascular endothelial growth factor (VEGF) was also be completed. We found that there was no difference in demographic characteristics, size of the defect, debridement times and functional outcomes between the two groups (p > 0.05); however, a significant difference in the wound healing time, hospitalization time and complications were noted between them(p < 0.05). The fresh granulation tissue of both groups showed abundant positive expression of VEGF. Thus, the VSD and IM are both available for foot and ankle reconstruction in elderly patients. However, the IM group offers short hospitalization time, duration of healing and lower frequency of postoperative complications. Thus, we advocate the IM for reconstruction of defects of the foot and ankle region in the elderly patients.

Reconstruction of Composite Soft Tissue Defect in the Distal Finger Using Partial Toenail Flap Transfer.

OBJECTIVE: Composite tissue loss involving the distal finger pulp and the nail is a common but challenging finger injury to restore. This study introduces a reconstruction procedure for a distal finger pulp and nail defect using a partial toenail flap transfer. METHODS: Twenty digits, including 16 thumbs, two index fingers, and two middle fingers, with composite soft tissue defects were treated with a partial toenail flap transfer from October 2015 to January 2020. Shortening revision of the great toe phalanx, a V-Y advancement flap of the toe pulp, and a local pedicle flap from a second toe transfer were used to cover the donor sites, and no skin grafts were required. Functionality was evaluated using the validated Spanish version of the Quick-DASH scale. The aesthetics of both the reconstructed and donor sites were evaluated using the Vancouver Scar Scale (VSS). The static two-point discrimination (2-PD) of the finger pulp was used as a measure of tactile agnosia. RESULTS: All donor site wounds healed well. The average follow-up time was 23.6 months (6-39 months). The mean Quick-DASH functional score was 7.1. The VSS scores were 4.02 ± 0.29 and 4.00 ± 0.38 for the reconstructed and donor sites, respectively. The static 2-PD of finger pulp was 4.5 ± 0.76 mm. The patients were satisfied with finger motion, sensory function, and aesthetic contour. CONCLUSIONS: Partial toenail flap transfer is the recommended treatment to regain motion, sensation, function, and a satisfactory aesthetic appearance when considering repairing a composite soft tissue distal finger defect with accompanying loss of the perionychium, particularly in the thumb, index finger, or middle finger.

Management of wounds with exposed bone structures using an induced-membrane followed by polymethyl methacrylate and second-stage skin grafting in the elderly with a 3-year follow-up.

The treatment of traumatic wounds with exposed bone or tendons is often challenging. An induced membrane (IM) is used to reconstruct bone defects, as it provides an effective and sufficient blood supply for bone and soft-tissue reconstruction. This study explored a novel two-stage strategy for wound management, consisting of initial wound coverage with polymethyl methacrylate (PMMA) and an autologous split-thickness skin graft under the IM. Fifty inpatients were enrolled from December 2016 to December 2019. Each patient underwent reconstruction according to a two-stage process. In the first stage, the defect area was thoroughly debrided, and the freshly treated wound was then covered using PMMA cement. After 4-6 weeks, during the second stage, the PMMA cement was removed to reveal an IM covering the exposed bone and tendon. An autologous split-thickness skin graft was then performed. Haematoxylin and eosin (H&E) staining and immunohistochemical analysis of vascular endothelial growth factor (VEGF), CD31 and CD34 were used to evaluate the IM and compare it with the normal periosteal membrane (PM). The psychological status and the Lower Extremity Function Scale (LEFS) as well as any complications were recorded at follow-up. We found that all skin grafts survived and evidenced no necrosis or infection. H&E staining revealed vascularised tissue in the IM, and immunohistochemistry showed a larger number of VEGF-, CD31- and CD34-positive cells in the IM than in the normal PM. The duration of healing in the group was 5.40 ± 1.32 months with a mean number of debridement procedures of 1.92 ± 0.60. There were two patients with reulceration in the group. The self-rating anxiety scale scores ranged from 35 to 60 (mean 48.02 ± 8.12). Postoperatively, the LEFS score was 50.10 ± 9.77. Finally, our strategy for the management of a non-healing wound in the lower extremities, consisting of an IM in combination with skin grafting, was effective, especially in cases in which bony structures were exposed in the elderly. The morbidity rate was low.

Retracted: Therapeutic Effects of Resveratrol Liposome on Muscle Injury in Rats.

This publication has been retracted by the Editor due to concerns regarding the originality of the figure images.Reference:Yongzeng Feng, Zili He, Cong Mao, Xiaolong Shui, Leyi Cai. Therapeutic Effects of Resveratrol Liposome on Muscle Injury in Rats. Med Sci Monit, 2019; 25:2377-2385. DOI: 10.12659/MSM.913409.

3D printing in fracture treatment : Current practice and best practice consensus.

The use of 3D printing in orthopedic trauma is supported by clinical evidence. Existing computed tomography (CT) data are exploited for better stereotactic identification of morphological features of the fracture and enhanced surgical planning. Due to complex logistic, technical and resource constraints, deployment of 3D printing is not straightforward from the hospital management perspective. As a result not all trauma surgeons are able to confidently integrate 3D printing into the daily practice. We carried out an expert panel survey on six trauma units which utilized 3D printing routinely. The most frequent indications are acetabular and articular fractures and malalignments. Infrastructure and manpower structure varied between units. The installation of industrial grade machines and dedicated software as well as the use of trained personnel can enhance the capacity and reliability of fracture treatment. Setting up interdisciplinary jointly used 3d printing departments with sound financial and management structures may improve sustainability. The sometimes substantial logistic and technical barriers which impede the rapid delivery of 3D printed models are discussed.

[3D printing in fracture treatment : Current practice and best practice consensus]. / 3D-Druck in der Frakturversorgung : Aktuelle Praxis und "Best-practice"-Konsens.

The use of 3D printing in orthopedic trauma is supported by clinical evidence. Existing computed tomography (CT) data are exploited for better stereotactic identification of morphological features of the fracture and enhanced surgical planning. Due to complex logistic, technical and resource constraints, deployment of 3D printing is not straightforward from the hospital management perspective. As a result not all trauma surgeons are able to confidently integrate 3D printing into the daily practice. We carried out an expert panel survey on six trauma units which utilized 3D printing routinely. The most frequent indications are acetabular and articular fractures and malalignments. Infrastructure and manpower structure varied between units. The installation of industrial grade machines and dedicated software as well as the use of trained personnel can enhance the capacity and reliability of fracture treatment. Setting up interdisciplinary jointly used 3d printing departments with sound financial and management structures may improve sustainability. The sometimes substantial logistic and technical barriers which impede the rapid delivery of 3D printed models are discussed.

A nomogram for predicting skin necrosis risk after open reduction and internal fixation for tibia fractures.

The purpose of our study was to determine the risk factors for skin necrosis after open reduction and internal fixation (ORIF) for tibia fracture and establish a nomogram prediction model. We retrospectively analysed the clinical data of patients who suffered from tibia fractures and had been surgically treated by ORIF in our institution between August 2015 and October 2020. Perioperative information was obtained through the electronic medical record system, univariate and multivariate analyses were performed to determine the risk factors of skin necrosis, and a nomogram model was constructed to predict the risk of skin necrosis. The predictive performance and consistency of the model were evaluated by the Hosmer-Lemeshow (H-L) test and the calibration curve. In total, 444 patients were enrolled in our study. Multivariate analysis results showed that limb swelling, time until the operation, operation time, distance from fracture end to the skin, and soft-tissue injury (Tscherne classification type 3) were independent risk factors for skin necrosis. The AUC value for skin necrosis risk was 0.906 (95% confidence interval 0.88~0.94). The H-L test revealed that the nomogram prediction model had good calibration ability (P = .467). Finally, we found a correlation between skin necrosis and limb swelling, time until the operation, operation time, distance from fracture end to the skin, and soft-tissue injury (Tscherne classification type 3) after ORIF for tibia fracture patients. Our nomogram prediction model might be helpful for clinicians to identify high-risk patients, as interventions could be taken early to reduce the incidence of skin necrosis.

Comparison of vacuum sealing drainage and conventional drainage for postoperative drainage in closed calcaneal fracture: A randomized controlled trial.

BACKGROUND: The objective of this study was to compare the outcomes of vacuum sealing drainage (VSD) and conventional drainage after surgery in the treatment of closed calcaneal fracture. We hypothesize that VSD is superior to conventional drainage in reducing volume of drainage, time of wound drying, time of skin fold, time of wound healing, VAS at day 3 postoperatively, wound complications and increasing wound healing grade. METHODS: 120 patients with closed calcaneal fractures from January 2016 to December 2018 were enrolled in our study. They were divided randomly into VSD group (n = 60) and conventional (n = 60). The volume of drainage, duration of drainage, time of wound drying, time of skin fold, time of wound healing and VAS at day 3 postoperatively were recorded. Furthermore, the wound complications of the two groups were also evaluated. Besides, wound healing grade was used to assess the degree of wound healing. The functional outcome American Orthopaedic Foot and Ankle Society (AOFAS) hindfoot scores and visual analog scale (VAS) pain scores was also evaluated. RESULTS: A total of 10 patients were lost to follow-up for various reasons, VSD group remained 55 cases while conventional group remained 53 cases. Our results showed that VSD group exhibited significantly more volume of drainage (P< 0.0001), longer duration of drainage (P< 0.0001), shorter time of wound drying (P = 0.0086), shorter time of skin fold (P = 0.0158), shorter time of wound healing (P = 0.0240) and lower VAS at day 3 postoperatively (P = 0.0019) compared with conventional group. Moreover, VSD group was demonstrated to have significantly lower wound complications (P = 0.025) and higher rate grade A of wound healing (P = 0.031). However, no significant difference was noted in time of fracture union (P = 0.754), VAS (P = 0.407) and AOFAS score (P = 0.512) at final follow-up between the two groups. CONCLUSIONS: Our hypothesis was confirmed that VSD was superior in terms of some aspects than conventional drainage. Therefore, VSD is a safe and effective postoperative wound drainage method in the treatment of closed calcaneal fracture. However, more and higher evidence needs to be carried to demonstrate the results.

A nomogram for prediction of deep venous thrombosis risk in elderly femoral intertrochanteric fracture patients: A dual-center retrospective study.

Objective: Deep venous thrombosis (DVT) of the lower extremity is a common perioperative complication of femoral intertrochanteric fracture. This study aimed to identify the risk factors of lower extremity deep vein thrombosis (DVT) in elderly femoral intertrochanteric fracture patients and establish a nomogram model. Methods: From August 2014 to June 2021, a total of 1,652 femoral intertrochanteric fracture patients over the age of 65 were enrolled in our study. We distinguished independent risk factors by univariate and multivariate Cox analyses. A nomogram model was then built, and the discriminative and calibration of the model was evaluated through receiver operating characteristics (ROC) and calibration plots. Results: A total of 378 patients developed DVT (292 in the training group, 86 in the validation group) while the remaining patients did not. According to the univariate and multivariate Cox analyses results, age (OR = 1.07, 95% CI: 1.04-1.10), fibrinogen (OR = 2.09, 95% CI: 1.68-2.60), D-dimer (OR = 1.33, 95% CI: 1.27-1.40), time from injury to admission (OR = 1.78, 95% CI: 1.55-2.05), functional status (OR = 4.21, 95% CI: 2.86-6.20), and diabetes (OR = 1.65, 95% CI: 1.10-2.48) were identified as independent risk factors of DVT. The ROC values for DVT of the training and validation group were 0.862 and 0.912, and the P-value of the Hosmer-Lemeshow calibration test was 0.767. Conclusion: This nomogram model can be used to predict the probability of preoperative DVT in elderly patients with femoral intertrochanteric fracture and guide physician in perioperative thrombosis management.

Spondylitis following bloodstream dissemination of Mycobacterium chelonae disseminated in an immunocompetent patient: a case report and literature review.

Non-tuberculous mycobacterial spondylitis is a rare spinal infection, especially among patients without acquired immunodeficiency syndrome or other immune impairments. Because of its rarity and non-specific clinical manifestations, diagnosis is often delayed or missed. Here, we present a case of Mycobacterium chelonae spondylitis in an immunocompetent patient and review the relevant literature.

Changes in radiological parameters during reduction of femoral neck fractures: A radiographic evaluation of cadavers.

OBJECTIVE: To investigate changes in the Garden index and other radiological parameters during reduction of femoral neck fractures. METHODS: Ten healthy, human femoral specimens were obtained. A 2.0 mm diameter Kirschner wire was implanted in the centre of the femoral head. A perpendicular osteotomy was made in the middle of the femoral neck. The distal osteotomy surface was used as the angle of rotation (pronation and supination up to 90° at 10° intervals). Anterior-posterior and lateral view radiographs were taken at different angles. The Garden index and other relevant data were analysed using the picture archiving and communication system. Changes in the area of the femoral head fovea at different rotation angles were measured. RESULTS: There were no significant differences in the Garden index between 0-30° of pronation and supination (p > .05). For angles of 40-90°, there were statistically significant differences in the Garden index (p < .05). The area of femoral head fovea decreased with increasing pronation angle, and increased with increasing supination angle. CONCLUSIONS: The Garden index does not change significantly if the angle of fracture rotation is 0-30° (in either pronation or supination) during femoral neck fracture reduction. Therefore, it is impossible to judge the rotation of fracture in this range of angles. The Garden index can detect the rotation of fracture for rotation angles of 40-90° (in either pronation or supination). Changes in the area of the femoral head fovea can help determine the rotation of femoral neck fractures. LEVEL OF EVIDENCE: Level V.

Erratum: An injectable liposome for sustained release of tanshinone IIA to the treatment of acute blunt muscle injury by augmenting autophagy and alleviating oxidative stress.

[This corrects the article on p. 4189 in vol. 12, PMID: 32913497.].

Comparison of percutaneous cross screw fixation versus open reduction and internal fixation for pelvic Day type II crescent fracture-dislocation: case-control study.

OBJECTIVE: To investigate the clinical outcomes of percutaneous cross screws internal fixation for pelvic Day type II crescent fracture-dislocation. METHODS: We reviewed 66 consecutive patients undergoing surgical treatment for Day type II crescent fracture-dislocation from June 2005 to December 2017. Percutaneous cross screws internal fixation was performed in 40 patients, and open reduction and internal fixation was performed in 26 patients. The patient characteristics, surgical complications, radiographic and clinical outcomes and were compared. RESULTS: There was no statistically difference on the mean time from injury to surgery between the two groups. The time of operation, the amount of blood loss, the length of incision, and the hospital stay were significantly shorter in the percutaneous cross screws internal fixation group. No significant difference on Matta scores and Majeed scores between the two groups. The open reduction and internal fixation group resulted in a higher rate of intraoperative hemorrhage, nerve injury, discomfort, and pain. CONCLUSION: Percutaneous cross screws internal fixation for Day II type pelvic crescent fracture-dislocation was safe and effective. Minimally invasive fixation had the advantages of short operation and hospitalization time, less intraoperative bleeding, and surgical trauma.

The effectiveness and safety of Tripterygium wilfordii glycosides combined with disease-modifying anti-rheumatic drugs in the treatment of rheumatoid arthritis: A systematic review and meta-analysis of 40 randomized controlled trials.

OBJECTIVE: This systematic review and meta-analysis were performed to investigate the efficacy and safety of Tripterygium wilfordii glycosides (TG) for rheumatoid arthritis (RA) from the current literature. METHODS: An electronic search was conducted in eight databases (PubMed, EMBASE, Web of Science, Cochrane Library, Chinese National Knowledge Infrastructure, Chinese Biomedical Literature Database, Chinese VIP Database, and Wanfang Database) from inception until September 2020. Randomized controlled trials (RCTs) with risk of bias (RoB) score ≥ 4 according to the Cochrane RoB tool were included for the analyses. The primary outcome measures were duration of morning stiffness (DMS), tender joint count (TJC), swollen joint count (SJC), visual analog score (VAS), C-reactive protein (CRP), erythrocyte sedimentation rate (ESR), and rheumatoid factor (RF). The secondary outcome measures were the total clinical effective rate and adverse events. All the analyses were used by the random effects models. The meta-analysis was performed using RevMan 5.3 and STATA 14.0. RESULTS: A total of 40 RCTs with 3092 patients met our inclusion criteria. This meta-analysis showed that TG plus DMARDs for RA could decrease the DMS (p < .001), TJC (p < .001), SJC (p < .001), VAS (p < .001), serum CRP (p < .001), ESR (p < .001), and RF (p < .001) and improve total effective rate (p < .001). In addition, TG was generally safe and well tolerated in RA patients. CONCLUSION: Despite the limitations, the present evidence supports, at least to an extent, that TG can be recommended for routine use for RA patients. More large multicenter and high-quality RCTs are required for further research.

Comparison of the feasibility of 3D printing technology in the treatment of pelvic fractures: a systematic review and meta-analysis of randomized controlled trials and prospective comparative studies.

PURPOSE: The objective of this meta-analysis was to assess the influence of 3D printing technology on the open reduction and internal fixation (ORIF) of pelvic fractures from current randomized controlled trials and prospective comparative studies. METHODS: In this meta-analysis, we conducted electronic searches of Pubmed, Embase, Cochrane library, Web of Science and CNKI up to February 2020. We collected clinical controlled trials using 3D printing-assisted surgery and traditional techniques to assist in pelvic fractures, evaluating the quality of the included studies and extracting data. The data of operation time, blood loss, follow-up function (Majeed function score), quality of fracture reduction (Matta score) and complications (infection, screw loosening, pelvic instability, venous thromboembolism, sacral nerve injury) were extracted. Stata 12.0 software was used for our meta-analysis. RESULTS: Five RCTs and 2 prospective comparative studies met our inclusion criteria with 174 patients in the 3D printing group and 174 patients in the conventional group. There were significant differences in operation time [SMD = - 2.03], intraoperative blood loss [SMD = - 1.66] and postoperative complications [RR = 0.17] between the 3D group and conventional group. And the excellent and good rate of pelvic fracture reduction in the 3D group [RR = 1.32], the excellent and good rate of pelvic function [RR = 1.29] was superior to the conventional group. CONCLUSIONS: The 3D group showed shorter operation time, less intraoperative blood loss, less complications, better quality of fracture reduction and fast function recovery. Therefore, compared with conventional ORIF, ORIF assisted by 3D printing technology should be a more appropriate treatment of pelvic fractures.