RESUMEN
Dynamic crystals with directional deformations in response to external stimuli through molecular reconfiguration, are observed predominantly in certain organic crystals and metal complexes. Low-dimensional hybrid halides, resemble these materials due to the presence of strong hydrogen bonds between bulky organic moieties and inorganic units, whereas their dynamic behavior remains largely unexplored. Here we show that a one-dimensional hybrid halide (MV)BiBr5 (MV = methylviologen) undergoes an isosymmetric phase transition at hydrostatic pressure of 0.20 GPa, accompanied by a remarkable length expansion of 20-30% and red to dark yellow color change. Unexpectedly, the backward transition can be fully reversed by mechanical stimulation rather than decompression. In the high-pressure phase, the coexistence of strong Bi3+ lone pair stereochemical activity and large reorientations of the planar MV2+ cations, together with the newly formed CH···Br hydrogen interactions, are the structural features that facilitate microscopic changes and stabilize the metastable high-pressure phase at ambient conditions.
RESUMEN
The framework material Eu[Ag(CN)2]3·3H2O exhibits a negative linear compressibility (NLC) of -4.2(1) TPa-1 over the largest pressure range yet observed (0-8.2 GPa). High-pressure single-crystal X-ray diffraction data show that the rapid contraction of the Kagome silver layers under compression causes the wine-rack lattice to expand along the c-axis. The hydrogen bonds between the water molecules and the main frameworks constrain the structural deformation under pressure and eventually a weak NLC effect generated. Furthermore, we found that the pressure-induced emission intensity increases almost 800-fold at 4.0 GPa, followed by a gradual decrease and disappearance at 8.1 GPa. Under compression, high pressure significantly tunes the triplet level positions near the Eu3+ ions, and horizontal displacement between a quenching excited state and the excited levels of Eu3+ facilitates the energy transfer process to the 5D0 excited state and limits the nonradiative corssover at elevated pressures, thus increasing the emission intensity. In addition, we observe a gradual band gap reduction with increasing pressure, and the sample could not be returned to the initial state after the pressure was completely released. By controlling the structural flexibility, we observe a coupled NLC and pressure-induced strong enhancement of the emission properties of Eu[Ag(CN)2]3·3H2O, which provides a new route for the design of new optical devices with intriguing luminescence properties under extreme environments.
RESUMEN
Crystals with significant length reduction at an accessible low pressure are highly desirable for piezo-responsive devices. Here, we show a molecular crystal [Ni(en)3](ox) (en = ethylenediamine and ox = oxalate anion) that exhibits an abrupt shape change with a contraction rate of â¼4.7% along its c axis near the phase transition pressure of â¼0.2 GPa. High-pressure single-crystal X-ray diffraction and Raman spectroscopy measurements reveal that this material undergoes a first-order ferroelastic transition from high-symmetry trigonal P3Ì 1c to low-symmetry monoclinic P21/n at â¼0.2 GPa. The oxalate anions serve as unique components, and their disorder-order transformation and rotation of 90° through cooperative intermolecular hydrogen bonding triggered unconventional anisotropic microsize contraction under compression, which can be appreciated visually. Such a prominent directional deformation at a low pressure driven by molecular motors of oxalate anions provides insights for the design of novel molecular crystal-based piezo-responsive switches and actuators in deep-sea environments.
RESUMEN
Ferroelectricity is typically suppressed under hydrostatic compression because the short-range repulsions, which favor the nonpolar phase, increase more rapidly than the long-range interactions, which prefer the ferroelectric phase. Here, based on single-crystal X-ray diffraction and density-functional theory, we provide evidence of a ferroelectric-like transition from phase I213 to R3 induced by pressure in two isostructural defect antiperovskites Hg3Te2Cl2 (15.5 GPa) and Hg3Te2Br2 (17.5 GPa). First-principles calculations show that this transition is attributed to pressure-induced softening of the infrared phonon mode Γ4, similar to the archetypal ferroelectric material BaTiO3 at ambient pressure. Additionally, we observe a gradual band-gap closing from ~2.5 eV to metallic-like state of Hg3Te2Br2 with an unexpectedly stable R3 phase even after semiconductor-to-metal transition. This study demonstrates the possibility of emergence of polar metal under pressure in this class of materials and establishes the possibility of pressure-induced ferroelectric-like transition in perovskite-related systems.
RESUMEN
Flexible and transformable molecules, particularly those responding to external stimuli, are needed for designing sensors and porous compounds capable of storing or separating gases and liquids. Under normal conditions the photochromic compound, 1,2-bis[2-methyl-5-(pyridyl)-3thienyl]cyclopentene (BTCP) forms a porous co-crystal with 1,4-diiodotetrafluorobenzene (dItFB). It traps acetone (Ac) molecules in the pores. Owing to a unique system of pores in the polar framework, the crystal is sensitive to the humidity in the air and to the chosen liquid environment. When compressed in non-penetrating media, the crystal displays a strong negative linear compressibility (NLC) along [100].
RESUMEN
The two major classes of unconventional superconductors, cuprates and Fe-based superconductors, have magnetic parent compounds, are layered, and generally feature square-lattice symmetry. We report the discovery of pressure-induced superconductivity in a nonmagnetic and wide band gap 1.95 eV semiconductor, Cu2I2Se6, with a unique anisotropic structure composed of two types of distinct molecules: Se6 rings and Cu2I2 dimers, which are linked in a three-dimensional framework. Cu2I2Se6 exhibits a concurrent pressure-induced metallization and superconductivity at â¼21.0 GPa with critical temperature (Tc) of â¼2.8 K. The Tc monotonically increases within the range of our study reaching â¼9.0 K around 41.0 GPa. These observations coincide with unprecedented chair-to-planar conformational changes of Se6 rings, an abrupt decrease along the c-axis, and negative compression within the ab plane during the phase transition. DFT calculations demonstrate that the flattened Se6 rings within the CuSe layer create a high density of states at the Fermi level. The unique structural features of Cu2I2Se6 imply that superconductivity may emerge in anisotropic Cu-containing materials without square-lattice geometry and magnetic order in the parent compound.
RESUMEN
Very few materials expand two-dimensionally under pressure, and this extremely rare phenomenon, namely negative area compressibility (NAC), is highly desirable for technological applications in pressure sensors and actuators. Hitherto, the few known NAC materials have dominantly been limited to 2D crystals bonded via coordination interactions while other 2D systems have not been explored yet. Here, we report the large NAC of a hydrogen-bonded 2D supramolecular coordination complex, Zn(CH3COO)2·2H2O, with a synergistic microscopic mechanism. Our findings reveal that such an unusual phenomenon, over a wide pressure range of 0.15-4.44 GPa without the occurrence of any phase transitions, arises from the complex cooperation of intra-layer coordination and hydrogen-bonding interactions, and inter-layer van der Waals forces. In addition, we propose that these NAC crystals could have important applications as pressure-converting materials in ultrasensitive pressure sensing devices.
RESUMEN
Here we study the Jahn-Teller (JT) effect on framework flexibility of two analogous hybrid organic-inorganic perovskites, [C(NH2)3][Zn(HCOO)3] (1-Zn) and [C(NH2)3][Cu(HCOO)3] (2-Cu). Single-crystal nanoindentation measurements show that the elastic moduli and hardnesses of 1-Zn are up to â¼52.0% and â¼25.0% greater than those of the JT active 2-Cu. Temperature-dependent X-ray diffraction measurements indicate that the thermal expansion along the b-axis is switched from negative to positive by replacing Zn2+ with Cu2+ on the B-site. These stark distinctions in framework flexibility are primarily attributed to the â¼10.0% elongation of Cu-O bonds induced by the JT effect and associated alterations in octahedral tilting and hydrogen-bonding. Our results demonstrate the prominence of the JT effect in the emerging hybrid perovskites and highlight the possibilities of tuning materials' properties using orbital order.
RESUMEN
We report synchrotron X-ray diffraction, photoconductivity, and photoluminescence investigations of methylammonium-lead-bromide (MAPbBr3) under various stress conditions, supported by density-functional-theory (DFT) calculations. The properties of MAPbBr3 show substantial dependence on the hydrostatic conditions. While nonhydrostatic compression of MAPbBr3 leads to amorphization above 2.4 GPa, under quasi-hydrostatic (Ar) and hydrostatic (He) pressure, the sample remains in crystalline phases. A sequence of phase transitions between two cubic phases and orthorhombic Pnma phase is observed when using Ar, or no pressure-transmitting-medium (PTM). In helium-PTM only transitions between the two cubic structures and a new isostructural phase transition with a large volume collapse to a third cubic-phase at 2.7 GPa was observed. The photoluminescence measurements indicate a pressure-induced band gap-narrowing in the cubic phase I, and a blue-shift in the orthorhombic structure. DFT calculations illustrate that the dynamics of the organic molecules and the inorganic lattice, coupled via the N-H···Br hydrogen-bonding interactions, affect the Pb-Br distance and the bandgap evolution under pressure.
RESUMEN
The crystal structure of elements at zero pressure and temperature is the most fundamental information in condensed matter physics. For decades it has been believed that lithium, the simplest metallic element, has a complicated ground-state crystal structure. Using synchrotron x-ray diffraction in diamond anvil cells and multiscale simulations with density functional theory and molecular dynamics, we show that the previously accepted martensitic ground state is metastable. The actual ground state is face-centered cubic (fcc). We find that isotopes of lithium, under similar thermal paths, exhibit a considerable difference in martensitic transition temperature. Lithium exhibits nuclear quantum mechanical effects, serving as a metallic intermediate between helium, with its quantum effect-dominated structures, and the higher-mass elements. By disentangling the quantum kinetic complexities, we prove that fcc lithium is the ground state, and we synthesize it by decompression.
RESUMEN
The low-temperature crystal structure of elemental lithium, the prototypical simple metal, is a several-decades-old problem. At 1 atm pressure and 298 K, Li forms a body-centered cubic lattice, which is common to all alkali metals. However, a low-temperature phase transition was experimentally detected to a structure initially identified as having the 9R stacking. This structure, proposed by Overhauser in 1984, has been questioned repeatedly but has not been confirmed. Here we present a theoretical analysis of the Fermi surface of lithium in several relevant structures. We demonstrate that experimental measurements of the Fermi surface based on the de Haas-van Alphen effect can be used as a diagnostic method to investigate the low-temperature phase diagram of lithium. This approach may overcome the limitations of X-ray and neutron diffraction techniques and makes possible, in principle, the determination of the lithium low-temperature structure (and that of other metals) at both ambient and high pressure. The theoretical results are compared with existing low-temperature ambient pressure experimental data, which are shown to be inconsistent with a 9R phase for the low-temperature structure of lithium.
RESUMEN
The enormous versatility in the properties of carbon materials depends on the content of the sp2 and sp3 covalent bonds. Under compression, if intermolecular distances cross a critical threshold, then unsaturated hydrocarbons gradually transform to saturated carbon polymers. However, the mechanism of polymerization, even for benzene, the simplest aromatic hydrocarbon, is still not understood. We used high-pressure synchrotron X-ray, neutron diffraction, and micro-Raman spectroscopy together with density functional calculations to investigate the isotope effects in benzene isotopologues C6H6 and C6D6 up to 46.0 GPa. Raman spectra of polymeric products recovered from comparable pressures show the progression of polymerization exhibiting a pronounced kinetic isotope effect. Kinetically retarded reactions in C6D6 shed light on the mechanism of polymerization of benzene. We find that C6D6-derived products recovered from P < 35 GPa actively react with moisture, forming polymers with higher sp3 hydrogen contents. Significant isotopic shift (≥7 GPa) in persistence of Bragg reflections of C6D6 is observed.
RESUMEN
We report a combined experimental and theoretical study of the high pressure behavior of a herringbone-type hydrocarbon benz[a]anthracene (BaA) using fluorescence spectroscopy, X-ray diffraction, optical absorption, photoconductivity measurements, and first-principles density functional theory (DFT) calculations. The ambient-pressure molecular solid phase of BaA was found to be stable up to â¼15.0 GPa. Increasing the external pressure within this region would induce a reversible piezochromic colour change in the sample, from yellow-green to light brown. The reversibility of the colour change was confirmed by both optical observations and fluorescence measurements. Further compression beyond 15 GPa leads to polymerization of the sample and formation of an amorphous hydrogenated carbon. The low pressure crystalline phase is not recoverable when the sample is decompressed from pressure above 15 GPa. DFT investigation of the structures at zero temperature suggests that the formation of a crystalline polymeric phase can take place between 30 and 117 GPa, however the kinetic barriers hinder the process at low pressure regions. The phase transition is therefore suggested to proceed along a gradual transition path to an amorphous phase at a lower reaction threshold, activated by finite temperature effects. Optical absorption measurements reveal that the band gap of BaA decreases at high pressure, from 2.4 eV at 0.5 GPa to 1.0 eV at 50.6 GPa. The DFT calculations further suggest that the band gap of BaA in the molecular phase could reduce to â¼0.1 eV at 117 GPa. Photoconductivity measurements show a continuous increase of photocurrent in the molecular phase region, which most likely originated from the increase of carrier mobility under pressure.
RESUMEN
Physical properties of lithium under extreme pressures continuously reveal unexpected features. These include a sequence of structural transitions to lower symmetry phases, metal-insulator-metal transition, superconductivity with one of the highest elemental transition temperatures, and a maximum followed by a minimum in its melting line. The instability of the bcc structure of lithium is well established by the presence of a temperature-driven martensitic phase transition. The boundaries of this phase, however, have not been previously explored above 3 GPa. All higher pressure phase boundaries are either extrapolations or inferred based on indirect evidence. Here we explore the pressure dependence of the martensitic transition of lithium up to 7 GPa using a combination of neutron and X-ray scattering. We find a rather unexpected deviation from the extrapolated boundaries of the hR3 phase of lithium. Furthermore, there is evidence that, above â¼3 GPa, once in fcc phase, lithium does not undergo a martensitic transition.
RESUMEN
A soft porous material [Zn(L)2(OH)2]n·Guest (where L is 4-(1H-naphtho[2,3-d]imidazol-1-yl)benzoate, and Guest is water or methanol) exhibits the strongest ever observed negative area compressibility (NAC), an extremely rare property, as at hydrostatic pressure most materials shrink in all directions and few expand in one direction. This is the first NAC reported in metal-organic frameworks (MOFs), and its magnitude, clearly visible and by far the highest of all known materials, can be reversibly tuned by exchanging guests adsorbed from hydrostatic fluids. This counterintuitive strong NAC of [Zn(L)2(OH)2]n·Guest arises from the interplay of flexible [-Zn-O(H)-]n helices with layers of [-Zn-L-]4 quadrangular puckered rings comprising large channel voids. The compression of helices and flattening of puckered rings combine to give a giant piezo-mechanical response, applicable in ultrasensitive sensors and actuators. The extrinsic NAC response to different hydrostatic fluids is due to varied host-guest interactions affecting the mechanical strain within the range permitted by exceptionally high flexibility of the framework.
Asunto(s)
Fenómenos Mecánicos , Compuestos Organometálicos/química , Benzoatos/química , Presión Hidrostática , Metanol/química , Modelos Moleculares , Conformación Molecular , Porosidad , Estrés Mecánico , Agua/química , Zinc/químicaRESUMEN
Materials with negative linear compressibility are sought for various technological applications. Such effects were reported mainly in framework materials. When heated, they typically contract in the same direction of negative linear compression. Here we show that this common inverse relationship rule does not apply to a three-dimensional metal-organic framework crystal, [Ag(ethylenediamine)]NO3. In this material, the direction of the largest intrinsic negative linear compression yet observed in metal-organic frameworks coincides with the strongest positive thermal expansion. In the perpendicular direction, the large linear negative thermal expansion and the strongest crystal compressibility are collinear. This seemingly irrational positive relationship of temperature and pressure effects is explained and the mechanism of coupling of compressibility with expansivity is presented. The positive coupling between compression and thermal expansion in this material enhances its piezo-mechanical response in adiabatic process, which may be used for designing new artificial composites and ultrasensitive measuring devices.
RESUMEN
The high-pressure phase IV of potassium dihydrogen phosphate (KH(2)PO(4), KDP) has been determined at 1.62 GPa/296 K. It is monoclinic, space group P2(1)/c, Z = 12, and on decompression transforms into monoclinic phase I. The interplay of OH···O bonding networks and K(+) coordination types leads to an exceptionally large number of KDP polymorphs, at least 13 according to the literature.