Evaluation of the Consumption of Junk Food Products and Lifestyle among Teenagers and Young Population from Romania.

BACKGROUND: The long-term consumption of junk food products can lead to nutritional and metabolic imbalances, especially when it is associated with a lack of physical activity and the consumption of alcohol or other high-calorie products. METHODS: The evaluation of junk food consumption among teenagers and young people in Romania was carried out with the help of a cross-sectional study based on a questionnaire. RESULTS: A total number of 1017 respondents participated in this study, comprising 470 males and 547 females aged between 16 and 25 years. Although the majority of young people fell into the normal-weight category (607 of them, p < 0.0001), some aspects can be noted that in the long term can produce a series of nutritional imbalances: an increased tendency toward sedentarism, with 553 (p = 0.613) of the respondents declaring that they performed sports rarely or not at all, and a tendency toward relatively high consumption of foods high in calories (fast food products and especially fried potatoes, hamburgers, shawarma, pastries, and snacks, along with sweetened drinks and even alcoholic beverages). The respondents participating in this study even indicated a perceived addiction to the consumption of certain products: coffee (50.48%), fried potatoes (38.9%), hamburgers (37.05%), shawarma (31.65%), and snacks (30.08%). Many of these products are rich in calories, saturated fat, and even trans fat. CONCLUSIONS: This study highlights a series of aspects that can have long-term negative effects related to the excess weight associated with other imbalances: consumption preferences among young people for hypercaloric fast food products, sweetened drinks associated with reduced physical activity, and even the development of some forms of food addictions for a series of hypercaloric foods.

Effects of Ga on the structural, mechanical and electronic properties of ß-Ti-45Nb alloy by experiments and ab initio calculations.

This work aims to investigate the structural, mechanical and electronic properties of four novel ß-type (100-x)(Ti-45Nb)-xGa alloys (x = 2, 4, 6, 8 wt%) for implant applications by means of experimental and theoretical (ab initio) methods. All alloys retain the bcc ß phase in the solution-treated and quenched state while the lattice parameter decreases with increase in Ga content. This is due to its smaller atomic radius compared to Ti and Nb, in line with the present density functional theory (DFT) calculations. Tensile and microhardness tests indicate a clear strengthening effect with increasing Ga content, with yield strengths in the range 551 ÷ 681 MPa and microhardness in the range 174 ÷ 232 HV0.1, mainly attributed to grain refinement and solid solution strengthening. Ga also positively affects ductility, with a maximum value of tensile strain at fracture of 32%. Non-destructive ultrasonic measurements and DFT calculations reveal that the bulk modulus is unaffected by the Ga presence. This phenomenon might be due to the fact that Ga introduced bonding and anti-bonding electron low energy states which balance the average bond strength among the atoms in the metallic matrix. Nevertheless, the introduction of new Ga-Ti super sp-like bonding orbitals along the [110] and [-110] directions in the Ga neighborhood could explain the increase of the Young's modulus upon Ga addition (73 ÷ 82.5 GPa) that was found experimentally in the present work. Hence, Ga addition to Ti-45Nb leads to a suitable balance between increased strength and low Young's modulus.

Fungal Based Biopolymer Composites for Construction Materials.

Environmental contamination, extensive exploitation of fuel sources and accessibility of natural renewable resources represent the premises for the development of composite biomaterials. These materials have controlled properties, being obtained through processes operated in mild conditions with low costs, and contributing to the valorization of byproducts from agriculture and industry fields. A novel board composite including lignocelullosic substrate as wheat straws, fungal mycelium and polypropylene embedded with bacterial spores was developed and investigated in the present study. The bacterial spores embedded in polymer were found to be viable even after heat exposure, helping to increase the compatibility of polymer with hydrophilic microorganisms. Fungal based biopolymer composite was obtained after cultivation of Ganoderma lucidum macromycetes on a mixture including wheat straws and polypropylene embedded with spores from Bacillus amyloliquefaciens. Scanning electron microscopy (SEM) and light microscopy images showed the fungal mycelium covering the substrates with a dense network of filaments. The resulted biomaterial is safe, inert, renewable, natural, biodegradable and it can be molded in the desired shape. The fungal biocomposite presented similar compressive strength and improved thermal insulation capacity compared to polystyrene with high potential to be used as thermal insulation material for applications in construction sector.

Tailoring biocompatible Ti-Zr-Nb-Hf-Si metallic glasses based on high-entropy alloys design approach.

Present work unveils novel magnetic resonance imaging (MRI) compatible glassy Ti-Zr-Nb-Hf-Si alloys designed based on a high entropy alloys approach, by exploring the central region of multi-component alloy phase space. Phase analysis has revealed the amorphous structure of developed alloys, with a higher thermal stability than the conventional metallic glasses. The alloys exhibit excellent corrosion properties in simulated body fluid. Most importantly, the weak paramagnetic nature (ultralow magnetic susceptibility) and superior radiopacity (high X-ray attenuation coefficients) offer compatibility with medical diagnostic imaging systems thereby opening unexplored realms for biomedical applications.

Routes to control diffusive pathways and thermal expansion in Ti-alloys.

ß-stabilized Ti-alloys present several unexplored and intriguing surprises in relation to orthorhombic α″ phases. Among them are (i) the diffusion-controlled formation of transitional α″iso, α″lean and α″rich phases and ii) the highly anisotropic thermal expansion of martensitic α″. Using the prototypical Ti-Nb system, we demonstrate that the thermodynamic energy landscape reveals formation pathways for the diffusional forms of α″ and may lead to a stable ß-phase miscibility gap. In this way, we derive temperature-composition criteria for the occurrence of α″iso and resolve reaction sequences during thermal cycling. Moreover, we show that the thermal expansion anisotropy of martensitic α″ gives rise to directions of zero thermal strain depending on Nb content. Utilizing this knowledge, we propose processing routes to achieve null linear expansion in α″ containing Ti-alloys. These concepts are expected to be transferable to other Ti-alloys and offer new avenues for their tailoring and technological exploitation.

Effects of new beta-type Ti-40Nb implant materials, brain-derived neurotrophic factor, acetylcholine and nicotine on human mesenchymal stem cells of osteoporotic and non osteoporotic donors.

INTRODUCTION: Treatment of osteoporotic fractures is still challenging and an urgent need exists for new materials, better adapted to osteoporotic bone by adjusted Young's modulus, appropriate surface modification and pharmaceuticals. MATERIALS AND METHODS: Titanium-40-niobium alloys, mechanically ground or additionally etched and titanium-6-aluminium-4-vanadium were analyzed in combination with brain-derived neurotrophic factor, acetylcholine and nicotine to determine their effects on human mesenchymal stem cells in vitro over 21 days using lactate dehydrogenase and alkaline phosphatase assays, live cell imaging and immunofluorescence microscopy. RESULTS: Cell number of human mesenchymal stem cells of osteoporotic donors was increased after 14 d in presence of ground titanium-40-niobium or titanium-6-aluminium-4-vanadium, together with brain-derived neurotrophic factor. Cell number of human mesenchymal stem cells of non osteoporotic donors increased after 21 d in presence of titanium-6-aluminium-4-vanadium without pharmaceuticals. No significant increase was measured for ground or etched titanium-40-niobium after 21 d. Osteoblast differentiation of osteoporotic donors was significantly higher than in non osteoporotic donors after 21 d in presence of etched, ground titanium-40-niobium or titanium-6-aluminium-4-vanadium accompanied by all pharmaceuticals tested. In presence of all alloys tested brain-derived neurotrophic factor, acetylcholine and nicotine increased differentiation of cells of osteoporotic donors and accelerated it in non osteoporotic donors. CONCLUSION: We conclude that ground titanium-40-niobium and brain-derived neurotrophic factor might be most suitable for subsequent in vivo testing.

Thermomechanical processing of In-containing ß-type Ti-Nb alloys.

In this study, the effect of thermomechanical processing on microstructure evolution of the indium-containing ß-type Ti alloys (Ti-40Nb)-3.5In and (Ti-36Nb)-3.5In was examined. Both alloys show an increased ß-phase stability compared to binary alloys due to In additions. This leads to a reduced α''-phase fraction in the solution treated and recrystallized state in the case of (Ti-36Nb)-3.5In and to the suppression of stress-induced α'' formation and deformation twinning for (Ti-40Nb)-3.5In. The mechanical properties of the alloys were subsequently studied by quasistatic tensile tests in the recrystallized state, revealing reduced Young's modulus values of 58GPa ((Ti-40Nb)-3.5In) and 56GPa ((Ti-36Nb)-3.5In) compared to 60GPa as determined for Ti-40Nb. For both In-containing alloys the ultimate tensile strength is in the range of 560MPa. Due to the suppressed α'' formation, (Ti-40Nb)-3.5In exhibits a linear elastic deformation behavior during tensile loading together with a low Young's modulus and is therefore promising for load-bearing implants.

Metal release and cell biological compatibility of beta-type Ti-40Nb containing indium.

Small indium (In) additions up to 5 wt % to the beta-type Ti-40Nb alloy effectively improve its mechanical biofunctionality. The impact on its biocompatibility is addressed in this work. Comparative electrochemical polarization studies and inductively coupled plasma optical emission spectrometry analyses were conducted in Tris-buffered saline (on the basis of 150 mM NaCl) with pH 7.6 and 2.0 at 310 ± 1 K with Ti-6Al-4V as reference. The metal ion releases from beta-type alloys were generally very low, for example, those of In3+ ions from (Ti-40Nb)-4In specimens were below 6 × 10-7 mmol/cm2 . X-ray photoelectron spectroscopy revealed the passivation mainly by Ti- and Nb-oxides with traces of In-oxides as the dominating surface process. In vitro studies demonstrate a better human bone marrow stromal cells (hBMSC) activity on the beta-type alloys in comparison to CP-Ti (grade 2), which is mainly due to their high Nb content. At 24 h after seeding on (Ti-40Nb)-4In the metabolic activity of hBMSC was 1.5-fold higher and after 11 days, the tissue non-specific alkaline phosphatase activity was 1.8-fold higher relative to values for CP-Ti. Surface treatments, like chemical etching or plasma oxidation, change the surface topography and the thickness and composition of the oxide layers, but they are not effective in further improving the cell response. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 1686-1697, 2018.

Giant thermal expansion and α-precipitation pathways in Ti-alloys.

Ti-alloys represent the principal structural materials in both aerospace development and metallic biomaterials. Key to optimizing their mechanical and functional behaviour is in-depth know-how of their phases and the complex interplay of diffusive vs. displacive phase transformations to permit the tailoring of intricate microstructures across a wide spectrum of configurations. Here, we report on structural changes and phase transformations of Ti-Nb alloys during heating by in situ synchrotron diffraction. These materials exhibit anisotropic thermal expansion yielding some of the largest linear expansion coefficients (+ 163.9×10-6 to -95.1×10-6 °C-1) ever reported. Moreover, we describe two pathways leading to the precipitation of the α-phase mediated by diffusion-based orthorhombic structures, α″lean and α″iso. Via coupling the lattice parameters to composition both phases evolve into α through rejection of Nb. These findings have the potential to promote new microstructural design approaches for Ti-Nb alloys and ß-stabilized Ti-alloys in general.

Degradation of keratin substrates by keratinolytic fungi

Background: The hydrolysis of keratin wastes by microorganisms is considered a biotechnological alternative for recycling and valorization through keratinolytic microorganisms. Despite their resistant structure, keratin wastes can be efficiently degraded by various microorganisms through the secretion of keratinases, which are promising enzymes for several applications, including detergents, fertilizers, and leather and textile industry. In an attempt to isolate keratinolytic microorganisms that can reach commercial exploitation as keratinase producers, the current work assesses the dynamics of keratin biodegradation by several keratinolytic fungal strains isolated from soil. The activity of fungal strains to degrade keratin substrates was evaluated by SEM, FTRIR-ATR spectra and TGA analysis. Results: SEM observations offered relevant information on interactions between microorganism and structural elements of hair strands. FTIR spectra of the bands at 1035­1075 cm-1 assigned to sulfoxide bond appeared because of S­S bond breaking, which demonstrated the initiation of keratin biodegradation. According to TGA, in the second zone of thermal denaturation, where keratin degradation occurs, the highest weight loss of 71.10% was obtained for sample incubated with Fusarium sp. 1A. Conclusions: Among the tested strains, Fusarium sp. 1A was the most active organism in the degradation process with the strongest denaturation of polypeptide chains. Because keratinolytic microorganisms and their enzymes keratinases represent a subject of scientific and economic interest because of their capability to hydrolyze keratin, Fusarium sp. 1A was selected for further studies.

Hierarchical surface patterning of Ni- and Be-free Ti- and Zr-based bulk metallic glasses by thermoplastic net-shaping.

In order to establish a strong cell-material interaction, the surface topography of the implant material plays an important role. This contribution aims to analyze the formation kinetics of nickel and beryllium-free Ti- and Zr-based Bulk Metallic Glasses (BMGs) with potential biomedical applications. The surface patterning of the BMGs is achieved by thermoplastic net-shaping (TPN) into anisotropically etched cavities of silicon chips. The forming kinetics of the BMG alloys is assessed by thermal and mechanical measurements to determine the most suitable processing temperature and time, and load applied. Array of pyramidal micropatterns with a tip resolution down to 50nm is achievable for the Zr-BMG, where the generated hierarchical features are crucial for surface functionalization, acting as topographic cues for cell attachment. The unique processability and intrinsic properties of this new class of amorphous alloys make them competitive with the conventional biomaterials.

Designing new biocompatible glass-forming Ti75-x Zr10 Nbx Si15 (x = 0, 15) alloys: corrosion, passivity, and apatite formation.

Glass-forming Ti-based alloys are considered as potential new materials for implant applications. Ti75 Zr10 Si15 and Ti60 Zr10 Nb15 Si15 alloys (free of cytotoxic elements) can be produced as melt-spun ribbons with glassy matrix and embedded single ß-type nanocrystals. The corrosion and passivation behavior of these alloys in their homogenized melt-spun states have been investigated in Ringer solution at 37°C in comparison to their cast multiphase crystalline counterparts and to cp-Ti and ß-type Ti-40Nb. All tested materials showed very low corrosion rates as expressed in corrosion current densities icorr < 50 nA/cm(2). Electrochemical and surface analytical studies revealed a high stability of the new alloys passive states in a wide potential range. This corresponds to low passive current densities ipass = 2 ± 1 µA/cm(2) based on the growth of oxide films with thickness d <10 nm. A homogeneous constituent distribution in the melt-spun alloys is beneficial for stable surface passivity. The addition of Nb does not only improve the glass-forming ability and the mechanical properties but also supports a high pitting resistance even at extreme anodic polarization up to 4V versus SCE were oxide thickness values of d ∼35 nm are reached. With regard to the corrosion properties, the Nb-containing nearly single-phase glassy alloy can compete with the ß-type Ti-40Nb alloy. SBF tests confirmed the ability for formation of hydroxyapatite on the melt-spun alloy surfaces. All these properties recommend the new glass-forming alloys for application as wear- and corrosion-resistant coating materials for implants.

New Cu-Free Ti-Based Composites with Residual Amorphous Matrix.

Titanium-based bulk metallic glasses (BMGs) are considered to have potential for biomedical applications because they combine favorable mechanical properties and good biocompatibility. Copper represents the most common alloying element, which provides high amorphization capacity, but reports emphasizing cytotoxic effects of this element have risen concerns about possible effects on human health. A new copper-free alloy with atomic composition Ti42Zr10Pd14Ag26Sn8, in which Cu is completely replaced by Ag, was formulated based on Morinaga's d-electron alloy design theory. Following this theory, the actual amount of alloying elements, which defines the values of covalent bond strength Bo and d-orbital energy Md, situates the newly designed alloy inside the BMG domain. By mean of centrifugal casting, cylindrical rods with diameters between 2 and 5 mm were fabricated from this new alloy. Differential scanning calorimetry (DSC) and X-rays diffraction (XRD), as well as microstructural analyses using optical and scanning electron microscopy (OM/SEM) revealed an interesting structure characterized by liquid phase-separated formation of crystalline Ag, as well as metastable intermetallic phases embedded in residual amorphous phases.

Factors influencing the elastic moduli, reversible strains and hysteresis loops in martensitic Ti-Nb alloys.

While the current research focus in the search for biocompatible low-modulus alloys is set on ß-type Ti-based materials, the potential of fully martensitic Ti-based alloys remains largely unexplored. In this work, the influence of composition and pre-straining on the elastic properties of martensitic binary Ti-Nb alloys was studied. Additionally, the phase formation was compared in the as-cast versus the quenched state. The elastic moduli and hardness of the studied martensitic alloys are at a minimum of 16wt.% Nb and peak between 23.5 and 28.5wt.% Nb. The uniaxial deformation behavior of the alloys used is characterized by the absence of distinct yield points. Monotonic and cyclic (hysteretic) loading-unloading experiments were used to study the influence of Nb-content and pre-straining on the elastic moduli. Such experiments were also utilized to assess the recoverable elastic and anelastic deformations as well as hysteretic energy losses. Particular attention has been paid to the separation of non-linear elastic from anelastic strains, which govern the stress and strain limits to which a material can be loaded without deforming it plastically. It is shown that slight pre-straining of martensitic Ti-Nb alloys can lead to considerable reductions in their elastic moduli as well as increases in their total reversible strains.

Elastic softening of ß-type Ti-Nb alloys by indium (In) additions.

Recent developments showed that ß-type Ti-Nb alloys are good candidates for hard tissue replacement and repair. However, their elastic moduli are still to be further reduced to match Young׳s modulus values of human bone, in order to avoid stress shielding. In the present study, the effect of indium (In) additions on the structural characteristics and elastic modulus of Ti-40 Nb was investigated by experimental and theoretical (ab initio) methods. Several ß-type (Ti-40 Nb)-xIn alloys (with x ≤ 5.2 wt%) were produced by cold-crucible casting and subsequent heat treatments (solid solutioning in the ß-field followed by water quenching). All studied alloys completely retain the ß-phase in the quenched condition. Room temperature mechanical tests revealed ultimate compressive strengths exceeding 770 MPa, large plastic strains (>20%) and a remarkable strain hardening. The addition of up to 5.2 wt% indium leads to a noticeable decrease of the elastic modulus from 69 GPa to 49 GPa, which is closer to that of cortical bone (<30 GPa). Young's modulus is closely related to the bcc lattice stability and bonding characteristics. The presence of In atoms softens the parent bcc crystal lattice, as reflected by a lower elastic modulus and reduced yield strength. Ab initio and XRD data agree that upon In substitution the bcc unit cell volume increases almost linearly. The bonding characteristics of In were studied in detail, focusing on the energies that appeared from the EDOSs significant for possible hybridizations. It came out that minor In additions introduce low energy states with s character that present antibonding features with the Ti first neighboring atoms as well as with the Ti-Nb second neighboring atoms thus weakening the chemical bonds and leading to elastic softening. These results could be of use in the design of low rigidity ß-type Ti-alloys with non-toxic additions, suitable for orthopedic applications.

Surface treatment, corrosion behavior, and apatite-forming ability of Ti-45Nb implant alloy.

The low modulus ß-type Ti-45Nb alloy is a promising new implant alloy due to its excellent mechanical biocompatibility and composition of non-toxic elements. The effect of surface treatments on the evolution of controlled topography and roughness was investigated by means of scanning electron microscopy and optical profilometry. Severe mechanical treatments, for example sand-blasting, or etching treatments in strongly oxidizing acidic solutions, like HF:HNO(3) (4:1) or H(2)SO(4):H(2)O(2) (1:1) piranha solution were found to be very effective. In particular, the latter generates a nanopatterned surface topography which is expected to be promising for the stimulation of bone tissue growth. Compared to Ti and Ti-6Al-4V, the ß-type Ti-45Nb alloy requires significantly longer etching durations due to the high chemical stability of Nb. Severe surface treatments alter the passive film properties, but do not deteriorate the outstanding corrosion resistance of the Ti-45Nb alloy in synthetic body fluid environments. The Ti-45Nb appears to have a lower apatite-formation ability compared to Ti. Etching with H(2)SO(4):H(2)O(2) (1:1) piranha solution inhibits apatite formation on Ti, but not on Ti-45Nb.

Thermal stability and phase transformations of martensitic Ti-Nb alloys.

Aiming at understanding the governing microstructural phenomena during heat treatments of Ni-free Ti-based shape memory materials for biomedical applications, a series of Ti-Nb alloys with Nb concentrations up to 29 wt% was produced by cold-crucible casting, followed by homogenization treatment and water quenching. Despite the large amount of literature available concerning the thermal stability and ageing behavior of Ti-Nb alloys, only few studies were performed dealing with the isochronal transformation behavior of initially martensitic Ti-Nb alloys. In this work, the formation of martensites (α' and α″) and their stability under different thermal processing conditions were investigated by a combination of x-ray diffraction, differential scanning calorimetry, dilatometry and electron microscopy. The effect of Nb additions on the structural competition in correlation with stable and metastable phase diagrams was also studied. Alloys with 24 wt% Nb or less undergo a [Formula: see text] transformation sequence on heating from room temperature to 1155 K. In alloys containing >24 wt% Nb α″ martensitically reverts back to ß0, which is highly unstable against chemical demixing by formation of isothermal ωiso. During slow cooling from the single phase ß domain α precipitates and only very limited amounts of α″ martensite form.

Production of Porous ß-Type Ti-40Nb Alloy for Biomedical Applications: Comparison of Selective Laser Melting and Hot Pressing.

We used selective laser melting (SLM) and hot pressing of mechanically-alloyed ß-type Ti-40Nb powder to fabricate macroporous bulk specimens (solid cylinders). The total porosity, compressive strength, and compressive elastic modulus of the SLM-fabricated material were determined as 17% ± 1%, 968 ± 8 MPa, and 33 ± 2 GPa, respectively. The alloy's elastic modulus is comparable to that of healthy cancellous bone. The comparable results for the hot-pressed material were 3% ± 2%, 1400 ± 19 MPa, and 77 ± 3 GPa. This difference in mechanical properties results from different porosity and phase composition of the two alloys. Both SLM-fabricated and hot-pressed cylinders demonstrated good in vitro biocompatibility. The presented results suggest that the SLM-fabricated alloy may be preferable to the hot-pressed alloy for biomedical applications, such as the manufacture of load-bearing metallic components for total joint replacements.

Designing biocompatible Ti-based metallic glasses for implant applications.

Ti-based metallic glasses show high potential for implant applications; they overcome in several crucial respects their well-established biocompatible crystalline counterparts, e.g. improved corrosion properties, higher fracture strength and wear resistance, increased elastic strain range and lower Young's modulus. However, some of the elements required for glass formation (e.g. Cu, Ni) are harmful for the human body. We critically reviewed the biological safety and glass forming tendency in Ti of 27 elements. This can be used as a basis for the future designing of novel amorphous Ti-based implant alloys entirely free of harmful additions. In this paper, two first alloys were developed: Ti(75)Zr(10)Si(15) and Ti(60)Nb(15)Zr(10)Si(15). The overheating temperature of the melt before casting can be used as the controlling parameter to produce fully amorphous materials or bcc-Ti-phase reinforced metallic glass nano-composites. The beneficial effect of Nb addition on the glass-formation and amorphous phase stability was assessed by X-ray diffraction, transmission electron microscopy and differential scanning calorimetry. Crystallization and mechanical behavior of ribbons are influenced by the amount and distribution of the nano-scaled bcc phase existing in the as-cast state. Their electrochemical stability in Ringer's solution at 310 K was found to be significantly better than that of commercial Ti-based biomaterials; no indication for pitting corrosion was recorded.