Rosmarinus officinalis L. (rosemary) extract has antibiofilm effect similar to the antifungal nystatin on Candida samples.

Candida spp. are naturally opportunistic and can promote infections. These yeasts can form biofilm, after penetration and adhesion to the biotic or abiotic surfaces. Preexisting diseases, treatments with drugs and radiation therapy, medical procedures, and parafunctional habits favor the installation of a fungal infection. Increased resistance to the available antifungals has become a concern. Therefore, alternative methods to control them have been evaluated, including the use of plant substances. In this study, the antibiofilm effect of R. officinalis L. extract was analyzed on C. albicans, C. dubliniensis, C. glabrata, C. krusei, and C. tropicalis. A phytochemical analysis of the extract was performed. Biofilms were formed for 48 h and exposed to the different concentrations of the extract (50, 100, and 200 mg/mL) for 5 min or 24 h. The effect of the plant extract was compared to the antifungal nystatin. Rosmarinus officinalis L. extract was constituted of phenols and flavonoids, highlighting the presence of chlorogenic acid derivatives in its composition. Biofilm reductions were observed after exposure to the plant extract for both periods. The plant extract provided a reduction similar to the antifungal. Thus, R. officinalis L. extract showed antibiofilm effect on Candida spp. comparable to the nystatin.

Novel Coatings to Minimize Bacterial Adhesion and Promote Osteoblast Activity for Titanium Implants.

Titanium nitride (TiN) and silicon carbide (SiC) adhesion properties to biofilm and the proliferation of human osteoblasts were studied. Quaternized titanium nitride (QTiN) was produced by converting the surface nitrogen on TiN to a positive charge through a quaternization process to further improve the antibacterial efficiency. The SiC required a nitridation within the plasma chamber of the surface layer before quaternization could be carried out to produce quaternized SiC (QSiC). The antimicrobial activity was evaluated on the reference strains of Porphyromonas gingivalis for 4 h by fluorescence microscopy using a live/dead viability kit. All the coatings exhibited a lower biofilm coverage compared to the uncoated samples (Ti-85.2%; TiN-24.22%; QTiN-11.4%; SiC-9.1%; QSiC-9.74%). Scanning Electron Microscope (SEM) images confirmed the reduction in P. gingivalis bacteria on the SiC and TiN-coated groups. After 24 h of osteoblast cultivation on the samples, the cell adhesion was observed on all the coated and uncoated groups. Fluorescence images demonstrated that the osteoblast cells adhered and proliferated on the surfaces. TiN and SiC coatings can inhibit the attachment of Porphyromonas gingivalis and promote osteoblast adhesion on the titanium used for implants. These coatings may possess the ability to prevent the development of peri-implantitis and stimulate osteointegration.

Antibacterial Properties of Charged TiN Surfaces for Dental Implant Application.

The formation and characterization of positively surface charged TiN surfaces were investigated for improving dental implant survival. Surface nitrogen atoms of a traditional TiN implant were converted to a positive charge by a quaternization reaction which greatly increased the antibacterial efficiency. Ti, TiN, and quaternized TiN samples were incubated with human patient subgingival bacteria for 4 hours at 37°C in an anaerobic environment with an approximate 40% reduction in counts on the quaternized surface over traditional Ti and TiN. The samples were challenged with Streptococcus Mutans and fluorescent imaging confirmed significant reduction in the quaternized TiN over the traditional Ti and TiN. Contact angle measurement and X-Ray Photoelectron Spectroscopy (XPS) were utilized to confirm the surface chemistry changes. The XPS results found the charged quaternized nitrogen peak at 399.75 eV that is unique to the quaternized sample.

Pectin-chitosan membrane scaffold imparts controlled stem cell adhesion and proliferation.

Processing stable polysaccharide membranes with suitable mechanical properties has been challenging for applications in wound healing and tissue engineering. Here we expand the characterization of pectin/chitosan (PT/CS) membranes (without covalent crosslinking), which we recently reported. Membranes containing pectin (PT) excess were formed, and PT/CS ratio can be tuned to enhance the mechanical strength, and to modulate hydrophilicity and cytocompatibility. The surface wettability and swelling properties of the polyelectrolyte complexes (PECs) played an important role to promote the attachment of stem cells. These PECs membranes have ultimate tensile strength similar to that of human skin, which is on the order of ten times higher than similar previously reported polysaccharide materials. We show for the first time that these new PT/CS membranes may promote anchorage, adhesion and support human stem cell growth, making them candidate materials for tissue engineering purposes.

Novel poly(ε-caprolactone)/amino-functionalized tannin electrospun membranes as scaffolds for tissue engineering.

Poly(ε-caprolactone) (PCL) is a hydrophobic and cytocompatible aliphatic polyester that has been used to produce PCL-based nanofibrous for both wound healing and tissue repair. However, the high hydrophobicity and low water adsorptive have been challenges for developing PCL-based materials for use in tissue engineering field. Here, we report a new polymer (a hydrophilic amino-functionalized tannin (TN)) that is associated with PCL for developing PCL-TN blends at different PCL:TN weight ratios (100:0, 95:5, 85:15 and 78:22). PCL:TN ratio may be tuned to modulate hydrophilicity and cytocompatibility of the nanofibers. The neutralization step and surface wettability played an important role in the attachment of human adipose-derived stem cells (ADSC cells) on PCL-TN membranes. Also, fluorescence images confirmed great proliferation of ADSC cells on the PCL-TN electrospun surfaces. Yet, neutralized PCL-TN nanofibers promoted bactericidal activity against Pseudomonas aeruginosa. These membranes have potential to be used as scaffolds for tissue engineering purposes.

Hierarchical structures of ß-TCP/45S5 bioglass hybrid scaffolds prepared by gelcasting.

This paper investigates the microstructure and the mechanical properties of ß-tricalcium phosphate (ß-TCP) three-dimensional (3D) porous materials reinforced with 45S5 bioactive glass (BG). ß-TCP and ß-TCP/x%-BG scaffolds with interconnected pores networks, suitable for bone regeneration, were fabricated by gel-casting method. Mechanical properties, porosity, and morphological characteristics were evaluated by compressive strength test, scanning electron microscopy (SEM) and X-ray microtomography analysis, whereas the structures were fully explored by XRD, and Raman spectroscopy. To the best of our knowledge, this is the first time where the mechanism for understanding the effect of bioglass on the mechanical properties and microstruture of ß-TCP/45S5-BG scaffolds has been systematically studied. The findings showed that ionic product lixiviated from 45S5 bioactive glass, rich in silicon species and sodium ion, catalyzes a phase transition from ß-TCP to Si-TCP by replacement of phosphorus for silicon and contributes to the improvement of scaffolds mechanical properties. The compressive strength of ß-TCP/5%-BG and ß-TCP/7.5%-BG was improved around 200% in comparison to pure ß-TCP. Osteoblast-like cells (MG 63) were exposed to the materials for 24h through the use of medium conditioned by ß-tricalcium phosphate/bioactive glass. Cell viability was measured by MTT assay in the cells and the data obtained were submitted to ANOVA, Tukey׳s multiple comparison (p<0.05). The ß-TCP/7.5-BG promoted an increase of cell proliferation. The results suggest that compositions and processing method studied may provide appropriate materials for tissue engineering.

Cytotoxicity and genotoxicity of natural resin-based experimental endodontic sealers.

OBJECTIVES: The development of endodontic sealers based on natural resins seems to be promising, given their improved biological properties. This study evaluated the cytotoxic and genotoxic effects of two experimental root canal sealers, based on extracts from Copaifera multijuga and Ricinus communis (castor oil polymer), comparing them to synthetic resin-based sealers: a single methacrylate-based, a multi-methacrylate-based, and an epoxy resin-based sealers. MATERIALS AND METHODS: Sealers were prepared, set, and exposed to cell culture medium for 24 h at 37 °C with CO2. V79 cells were exposed to serial dilutions of the extracts of each sealer for 24 h. Cell viability was measured by the MTT assay and genotoxicity was assessed by the formation of micronuclei. RESULTS: The single methacrylate-based sealer had the most cytotoxic effects, with significant reduction in cell viability in all dilutions of the extract. The castor oil polymer-based sealer was, on the other hand, the most biocompatible sealer, with no cytotoxic effects at any concentration. All tested sealers were not genotoxic, excepting the single methacrylate-based sealer. CONCLUSIONS: The tested natural resin-based sealers presented low cytotoxic and no genotoxic effects on cell cultures. CLINICAL RELEVANCE: These results may suggest a good alternative to develop new endodontic sealers, in order to achieve better biological response and healing, when compared to commercially available sealers.

Cytotoxicity and genotoxicity of root canal sealers based on mineral trioxide aggregate.

INTRODUCTION: MTA has good biological properties, and it is a mineralization-inducing material with different indications in endodontics. Initially this material was not recommended as root canal sealer. However, a resin sealer based on mineral trioxide aggregate (MTA Fillapex) was recently released with this indication. Because MTA is in contact with the periodontal tissues, bone, and pulp, it is important to know its cytotoxic and genotoxic effects. The purpose of this study was to evaluate the cytotoxicity and genotoxicity of MTA canal sealer (Fillapex) compared with white MTA cement and AH Plus. METHODS: Chinese hamster fibroblasts (V79) were placed in contact with different dilutions of culture media previously exposed to such materials. Cytotoxicity was evaluated by methol-thiazol-diphenyl tetrazolium assay in spectrophotometer to check the viability rate and cell survival. The genotoxicity was accessed by the micronucleus formation assay. Cell survival rate and micronuclei number were assessed before and after exposure to cement extracts, and the results were statistically analyzed by Kruskal-Wallis and Dunn tests (P < .05). RESULTS: The results showed that the cell viability remained above 50% in white MTA group for all dilutions. AH Plus induced an intermediate cytotoxicity in a dilution-dependent manner, followed by Fillapex MTA. CONCLUSIONS: White MTA group was the less cytotoxic material in this study. Both AH Plus and Fillapex MTA sealer showed the lowest cell viability rates and caused an increased micronucleus formation when compared with control untreated group.