Characterization of LL37 Binding to Collagen through Peptide Modification with a Collagen-Binding Domain.

Collagen-based biomaterials loaded with antimicrobial peptides (AMPs) present a promising approach for promoting wound healing while providing protection against infections. In our previous work, we modified the AMP LL37 by incorporating a collagen-binding domain (cCBD) as an anchoring unit for collagen-based wound dressings. We demonstrated that cCBD-modified LL37 (cCBD-LL37) exhibited improved retention on collagen after washing with PBS. However, the binding mechanism of cCBD-LL37 to collagen remained to be elucidated. In this study, we found that cCBD-LL37 showed a slightly higher affinity for collagen compared to LL37. Our results indicated that cCBD inhibited cCBD-LL37 binding to collagen but did not fully eliminate the binding. This suggests that cCBD-LL37 binding to collagen may involve more than just one-site-specific binding through the collagen-binding domain, with non-specific interactions also playing a role. Electrostatic studies revealed that both LL37 and cCBD-LL37 interact with collagen via long-range electrostatic forces, initiating low-affinity binding that transitions to close-range or hydrophobic interactions. Circular dichroism analysis showed that cCBD-LL37 exhibited enhanced structural stability compared to LL37 under varying ionic strengths and pH conditions, implying potential improvements in antimicrobial activity. Moreover, we demonstrated that the release of LL37 and cCBD-LL37 into the surrounding medium was influenced by the electrostatic environment, but cCBD could enhance the retention of peptide on collagen scaffolds. Collectively, these results provide important insights into cCBD-modified AMP-binding mechanisms and suggest that the addition of cCBD may enhance peptide structural stability and retention under varying electrostatic conditions.

LL37-Derived Fragments Improve the Antibacterial Potential of Penicillin G and Ampicillin against Methicillin-Resistant Staphylococcus aureus.

Methicillin-resistant Staphylococcus aureus (MRSA) infections are a severe threat to public health. Antimicrobial peptides (AMPs) are novel and potential antimicrobials with specific antibacterial mechanisms. Our aim was to study the potential of LL37, FK16, and FK13 to enhance the anti-MRSA activity of antibiotics in vitro, particularly penicillin G and ampicillin. Our results showed that FK16 and FK13 have more synergistic inhibitory effects to MRSA strains when combined with penicillin G and ampicillin. In addition, AMPs exhibited strong membrane permeabilizing properties, and membrane permeabilizing effects can provide a possible explanation for the improved antibacterial effects of antibiotics, since permeabilizing AMPs have the potential to increase the access of antibiotics. To further study the electrostatic interactions among cationic AMPs with negatively charged bacteria, we measured the zeta potentials of three MRSA strains and also neutralized three MRSA strains with the addition of cationic AMPs. Further, we demonstrated the connection between membrane permeabilization and zeta potential neutralization. Finally, we treated MRSA strains with AMPs and characterized the MICs of penicillin G and ampicillin. FK16 was the most promising AMP among the three AMPs, since exposure to FK16 decreased the MICs of both penicillin G and ampicillin for all MRSA strains and also demonstrated more synergistic combinations when combined with antibiotics. AMP exposure and subsequent membrane permeabilization provide a possible pathway to re-sensitize drug-resistant bacteria to traditional antibiotics. Re-sensitization may help preserve the effectiveness of traditional antibiotics, thus providing a potential new strategy for fighting MRSA infections.

LL37 and collagen-binding domain-mediated LL37 binding with type I collagen: Quantification via QCM-D.

Antimicrobial peptide (AMP)-loaded biomaterials may represent a viable alternative for stimulating wound healing while protecting against infections. Previously, to develop an efficient delivery system for the cathelicidin antimicrobial peptide, LL37, our lab modified LL37 with a collagen-binding domain derived from collagenase (cCBD) as an anchoring unit to collagen-based wound dressings. However, a direct quantification of unmodified LL37 and cCBD-LL37 binding with collagen has not been performed. In this study, we used quartz crystal microbalance with dissipation monitoring (QCM-D), immunohistochemistry (IHC), and atomic force microscopy (AFM) to establish and characterize an adsorbed layer of type I collagen on the QCM-D sensor and quantify peptide-collagen binding. A collagen deposition protocol was successfully established by measuring concentration-dependent deposition of collagen in QCM-D, and collagen self-assembly was observed by IHC and AFM. Hydrophobicity is known to affect the behavior of collagen adsorption. Therefore, we compared the deposition of collagen on hydrophilic SiO2-coated sensors vs. hydrophobic polystyrene (PS)-coated sensors via QCM-D, and found that the hydrophobic surface yielded more collagen adsorption, which suggested that hydrophobic surfaces are preferable for collagen layer establishment. There was no significant difference between LL37 and cCBD-LL37 binding with collagen, but the cCBD-LL37 showed better retention on the collagen after washing with PBS, indicating that there is an advantage to using cCBD as an anchoring unit to collagen. Collectively, these results provide important information on cCBD-mediated AMP-binding mechanisms and establish an effective method for quantifying peptide-collagen binding.

New antimicrobial peptide-antibiotic combination strategy for Pseudomonas aeruginosa inactivation.

Novel antimicrobials or new treatment strategies are urgently needed to treat Pseudomonas aeruginosa (P. aeruginosa) related infections and especially to address the problem of antibiotic resistance. We propose a novel strategy that combines the human antimicrobial peptide (AMP) LL37 with different antibiotics to find synergistic AMP-antibiotic combinations against P. aeruginosa strains in vitro. Our results showed that LL37 exhibited synergistic inhibitory and bactericidal effects against P. aeruginosa strains PAO1 and PA103 when combined with the antibiotics vancomycin, azithromycin, polymyxin B, and colistin. In addition, LL37 caused strong outer membrane permeabilization, as demonstrated through measurement of an increased uptake of the fluorescent probe N-phenyl-1-naphthylamine. The membrane permeabilization effects appear to explain why it was easier to rescue the effectiveness of the antibiotic toward the bacteria because the outer membrane of P. aeruginosa exhibits barrier function for antibiotics. Furthermore, the change in the zeta potential was measured for P. aeruginosa strains with the addition of LL37. Zeta potentials for P. aeruginosa strains PAO1 and PA103 were -40.9 and -10.9 mV, respectively. With the addition of LL37, negative zeta potentials were gradually neutralized. We found that positively charged LL37 can interact with and neutralize the negatively charged bacterial outer membrane through electrostatic interactions, and the process of neutralization is believed to have contributed to the increase in outer membrane permeability. Finally, to further illustrate the relationship between outer membrane permeabilization and the uptake of antibiotics, we used LL37 to make the outer membrane of P. aeruginosa strains more permeable, and minimum inhibitory concentrations (MICs) for several antibiotics (colistin, gentamicin, polymyxin B, vancomycin, and azithromycin) were measured. The MICs decreased were twofold to fourfold, in general. For example, the MICs of azithromycin and vancomycin decreased more than fourfold when against P. aeruginosa strain PAO1, which were the greatest decrease of any of the antibiotics tested in this experiment. As for PA103, the MIC of polymyxin B2 decreased fourfold, which was the strongest decrease seen for any of the antibiotics tested in this experiment. The increased uptake of antibiotics not only demonstrates the barrier role of the outer membrane but also validates the mechanism of synergistic effects that we have proposed. These results indicate the great potential of an LL37-antibiotic combination strategy and provide possible explanations for the mechanisms behind this synergy.

Formation of a Fully Anionic Supported Lipid Bilayer to Model Bacterial Inner Membrane for QCM-D Studies.

Supported lipid bilayers (SLBs) on quartz crystals are employed as versatile model systems for studying cell membrane behavior with the use of the highly sensitive technique of quartz crystal microbalance with dissipation monitoring (QCM-D). Since the lipids constituting cell membranes vary from predominantly zwitterionic lipids in mammalian cells to predominantly anionic lipids in the inner membrane of Gram-positive bacteria, the ability to create SLBs of different lipid compositions is essential for representing different cell membranes. While methods to generate stable zwitterionic SLBs and zwitterionic-dominant mixed zwitterionic-anionic SLBs on quartz crystals have been well established, there are no reports of being able to form predominantly or fully anionic SLBs. We describe here a method for forming entirely anionic SLBs by treating the quartz crystal with cationic (3-aminopropyl) trimethoxysilane (APTMS). The formation of the anionic SLB was tracked using QCM-D by monitoring the adsorption of anionic lipid vesicles to a quartz surface and subsequent bilayer formation. Anionic egg L-α-phosphatidylglycerol (PG) vesicles adsorbed on the surface-treated quartz crystal, but did not undergo the vesicle-to-bilayer transition to create an SLB. However, when PG was mixed with 10-40 mole% 1-palmitoyl-2-hydroxy-sn-glycero-3-phospho-(1'-rac-glycerol) (LPG), the mixed vesicles led to the formation of stable SLBs. The dynamics of SLB formation monitored by QCM-D showed that while SLB formation by zwitterionic lipids followed a two-step process of vesicle adsorption followed by the breakdown of the adsorbed vesicles (which in turn is a result of multiple events) to create the SLB, the PG/LPG mixed vesicles ruptured immediately on contacting the quartz surface resulting in a one-step process of SLB formation. The QCM-D data also enabled the quantitative characterization of the SLB by allowing estimation of the lipid surface density as well as the thickness of the hydrophobic region of the SLB. These fully anionic SLBs are valuable model systems to conduct QCM-D studies of the interactions of extraneous substances such as antimicrobial peptides and nanoparticles with Gram-positive bacterial membranes.

Atomic Force Microscopy to Characterize Antimicrobial Peptide-Induced Defects in Model Supported Lipid Bilayers.

Antimicrobial peptides (AMPs) interact with bacterial cell membranes through a variety of mechanisms, causing changes extending from nanopore formation to microscale membrane lysis, eventually leading to cell death. Several AMPs also disrupt mammalian cell membranes, despite their significantly different lipid composition and such collateral hemolytic damage hinders the potential therapeutic applicability of the AMP as an anti-microbial. Elucidating the mechanisms underlying the AMP-membrane interactions is challenging due to the variations in the chemical and structural features of the AMPs, the complex compositional variations of cell membranes and the inadequacy of any single experimental technique to comprehensively probe them. (1) Background: Atomic Force Microscopy (AFM) imaging can be used in combination with other techniques to help understand how AMPs alter the orientation and structural organization of the molecules within cell membranes exposed to AMPs. The structure, size, net charge, hydrophobicity and amphipathicity of the AMPs affect how they interact with cell membranes of differing lipid compositions. (2) Methods: Our study examined two different types of AMPs, a 20-amino acid, neutral, α-helical (amphipathic) peptide, alamethicin, and a 13-amino acid, non-α-helical cationic peptide, indolicidin (which intramolecularly folds, creating a hydrophobic core), for their interactions with supported lipid bilayers (SLBs). Robust SLB model membranes on quartz supports, incorporating predominantly anionic lipids representative of bacterial cells, are currently not available and remain to be developed. Therefore, the SLBs of zwitterionic egg phosphatidylcholine (PC), which represents the composition of a mammalian cell membrane, was utilized as the model membrane. This also allows for a comparison with the results obtained from the Quartz Crystal Microbalance with Dissipation (QCM-D) experiments conducted for these peptides interacting with the same zwitterionic SLBs. Further, in the case of alamethicin, because of its neutrality, the lipid charge may be less relevant for understanding its membrane interactions. (3) Results: Using AFM imaging and roughness analysis, we found that alamethicin produced large, unstable defects in the membrane at 5 µM concentrations, and completely removed the bilayer at 10 µM. Indolicidin produced smaller holes in the bilayer at 5 and 10 µM, although they were able to fill in over time. The root-mean-square (RMS) roughness values for the images showed that the surface roughness caused by visible defects peaked after peptide injection and gradually decreased over time. (4) Conclusions: AFM is useful for helping to uncover the dynamic interactions between different AMPs and cell membranes, which can facilitate the selection and design of more efficient AMPs for use in therapeutics and antimicrobial applications.

AFM Study of Nanoscale Membrane Perturbation Induced by Antimicrobial Lipopeptide C14 KYR.

Lipopeptides have been extensively studied as potential antimicrobial agents. In this study, we focused on the C14-KYR lipopeptide, a modified version of the KYR tripeptide with myristic acid at the N-terminus. Here, membrane perturbation of live E. coli treated with the parent KYR and C14-KYR peptides was compared at the nanoscale level using AFM imaging. AFM analyses, including average cellular roughness and force spectroscopy, revealed the severe surface disruption mechanism of C14-KYR. A loss of surface roughness and changes in topographic features included membrane shrinkage, periplasmic membrane separation from the cell wall, and cytosolic leakage. Additional evidence from synchrotron radiation FTIR microspectroscopy (SR-FTIR) revealed a marked structural change in the membrane component after lipopeptide attack. The average roughness of the E. coli cell before and after treatment with C14-KYR was 129.2 ± 51.4 and 223.5 ± 14.1 nm, respectively. The average rupture force of the cell treated with C14-KYR was 0.16 nN, four times higher than that of the untreated cell. Our study demonstrates that the mechanistic effect of the lipopeptide against bacterial cells can be quantified through surface imaging and adhesion force using AFM.

Role of lipopolysaccharides and lipoteichoic acids on C-Chrysophsin-1 interactions with model Gram-positive and Gram-negative bacterial membranes.

Antimicrobial peptides (AMPs) are attractive as biomaterial coatings because they have broad spectrum activity against different microbes, with a low likelihood of incurring antimicrobial resistance. Direct action against the bacterial membrane is the most common mechanism of action (MOA) of AMPs, with specific MOAs dependent on membrane composition, peptide concentration, and environmental factors that include temperature. Chrysophsin-1 (CHY1) is a broad spectrum salt-tolerant AMP that is derived from a marine fish. A cysteine modification was made to the peptide to facilitate attachment to a surface, such as a biomedical device. The authors used quartz crystal microbalance with dissipation monitoring to study how temperature (23 and 37 °C) and lipid composition influence the MOA of cysteine-modified peptide (C-CHY1) with model membranes comprised of supported lipid bilayers (SLBs). These two temperatures were used so that the authors could better understand the differences in behavior between typical lab temperatures and physiologic conditions. The authors created model membranes that mimicked properties of Gram-negative and Gram-positive bacteria in order to understand how the mechanisms might differ for different types of bacterial systems. SLB models of Gram-positive bacterial membranes were formed using combinations of phosphatidylcholine, phosphatidylglycerol (PG), and S. aureus-derived lipoteichoic acid (LTA). SLB models of Gram-negative bacterial membranes were formed using combinations of phosphatidylethanolamine (PE), PG, and E. coli-derived lipopolysaccharides (LPS). The molecules that distinguish Gram-positive and Gram-negative membranes (LTA and LPS) have the potential to alter the MOA of C-CHY1 with the SLBs. The authors' results showed that the MOA for the Gram-positive SLBs was not sensitive to temperature, but the LTA addition did have an effect. Specifically, similar trends in frequency and dissipation changes across all overtones were observed, and the same mechanistic trends were observed in the polar plots at 23 and 37 °C. However, when LTA was added, polar plots showed an association between C-CHY1 and LTA, leading to SLB saturation. This was demonstrated by significant changes in dissipation, while the frequency (mass) was not increasing after the saturation point. For the Gram-negative SLBs, the composition did not have a significant effect on MOA, but the authors saw more differences between the two temperatures studied. The authors believe this is due to the fact that the gel-liquid crystal transition temperature of PE is 25 °C, which means that the bilayer is more rigid at 23 °C, compared to temperatures above the transition point. At 23 °C, a significant energetic shift would be required to allow for additional AMP insertion. This could be seen in the polar plots, where there was a steep slope but there was very little mass addition. At 37 °C, the membrane is more fluid and there is less of an energetic requirement for insertion. Therefore, the authors observed greater mass addition and fewer changes in dissipation. A better understanding of C-CHY1 MOA using different SLB models will allow for the more rational design of future therapeutic solutions that make use of antimicrobial peptides, including those involving biomaterial coatings.

Alginate Affects Bioactivity of Chimeric Collagen-Binding LL37 Antimicrobial Peptides Adsorbed to Collagen-Alginate Wound Dressings.

Chronic infected wounds cause more than 23,000 deaths annually. Antibiotics and antiseptics are conventionally used to treat infected wounds; however, they can be toxic to mammalian cells, and their use can contribute to antimicrobial resistance. Antimicrobial peptides (AMPs) have been utilized to address the limitations of antiseptics and antibiotics. In previous work, we modified the human AMP LL37 with collagen-binding domains from collagenase (cCBD) or fibronectin (fCBD) to facilitate peptide tethering and delivery from collagen-based wound dressings. We found that cCBD-LL37 and fCBD-LL37 were retained and active when bound to 100% collagen scaffolds. Collagen wound dressings are commonly made as composites with other materials, such as alginate. The goal of this study was to investigate how the presence of alginate affects the tethering, release, and antimicrobial activity of LL37 and CBD-LL37 peptides adsorbed to commercially available collagen-alginate wound dressings (FIBRACOL Plus-a 90% collagen and 10% alginate wound dressing). We found that over 85% of the LL37, cCBD-LL37, and fCBD-LL37 was retained on FIBRACOL Plus over a 14-day release study (90.3, 85.8, and 98.6%, respectively). Additionally, FIBRACOL Plus samples loaded with peptides were bactericidal toward Pseudomonas aeruginosa, even after 14 days in release buffer but demonstrated no antimicrobial activity against Escherichia coli, Staphylococcus aureus, and Staphylococcus epidermidis. The presence of alginate in solution induced conformational changes in the cCBD-LL37 and LL37 peptides, resulting in increased peptide helicity, and reduced antimicrobial activity against P. aeruginosa. Peptide-loaded FIBRACOL Plus scaffolds were not cytotoxic to human dermal fibroblasts. This study demonstrates that CBD-mediated LL37 tethering is a viable strategy to reduce LL37 toxicity, and how substrate composition plays a crucial role in modulating the antimicrobial activity of tethered AMPs.

Mechanistic predictions of the influence of collagen-binding domain sequences on human LL37 interactions with model lipids using quartz crystal microbalance with dissipation.

Modifications of human-derived antimicrobial peptide LL37 with collagen binding domains (CBD-LL37) hold promise as alternatives to antibiotics due to their wider therapeutic ratio than unmodified LL37 when interacting with collagen substrates such as commercial wound dressings. However, CBD-LL37 lipid membrane interaction mechanisms (against both mammalian and bacterial lipids) are not well understood. Our goal was to develop a mechanistic explanation of how CBDs modulate peptide-lipid interactions leading to their observed bioactivities, in order to better understand their potential for clinical applications. The authors studied time- and concentration-dependent interactions of CBD-LL37 modified with collagenase (cCBD) and fibronectin (fCBD) CBDs, with zwitterionic and anionic supported lipid bilayers, in order to model mammalian erythrocytes and bacterial cells, respectively. Quartz crystal microbalance with dissipation monitoring (QCM-D) was used to characterize peptide-lipid interactions at concentrations in the immunomodulatory (0.5-1.0 µM), antimicrobial (1.0-5.0 µM), and cytotoxic (5.0-10.0 µM) ranges. Their prior work with zwitterionic membranes demonstrated that cCBD-LL37 formed transmembrane pores while fCBD-LL37 underwent surface adsorption. Our goal in this study is to better interpret these results, by investigating the data at a wider concentration range and for two types of lipids, and by applying the Voigt-Kelvin viscoelastic model to calculate thickness and density changes of the peptide-lipid films as a function of time and concentration, thus providing information to help build detailed mechanisms of peptide/bilayer interactions. For pore-forming cCBD-LL37 and unmodified LL37, they found that there was a relationship between layer thicknesses and pore formation, which was attributed to different peptide orientation changes influenced by bilayer charge prior to pore formation. Specifically, cCBD-LL37 at 0.5 and 1.0 µM demonstrated higher thicknesses on zwitterionic than anionic membranes, indicating that prior to insertion into zwitterionic membranes, it orients perpendicular to the surface, which was also consistent with the higher dissipation changes observed on zwitterionic membranes. fCBD-LL37 demonstrated a bilayer adsorption mechanism with a preference toward anionic lipids. Adsorption of fCBD-LL37 onto anionic lipids demonstrated a rapid first adsorption step that transitioned depending on the number of fCBD-LL37 molecules on the bilayer. For this peptide at higher concentrations, greater dissipation changes were observed than for fCBD-LL37 physically adsorbed onto surfaces without bilayers. This suggests that peptide-peptide interactions promoted by the fCBD domain dominated after saturation. The development of a structure-function relationship for cCBD-LL37 and fCBD-LL37 demonstrates promise for using QCM-D predictions to inform the rational design of novel, antimicrobial, and noncytotoxic CBD-LL37 for clinical applications.

QCM-D characterization of time-dependence of bacterial adhesion.

Quartz crystal microbalance with dissipation monitoring (QCM-D) is becoming an increasingly popular technique that can be employed as part of experimental and modeling investigations of bacterial adhesion. The usefulness of QCM-D derives from this technique's ability to probe binding and interactions under dynamic conditions, in real time. Bacterial adhesion is an important first step in the formation of biofilms, the control of which is relevant to industries that include shipping, water purification, packaging, and biomedical devices. However, many questions remain unanswered in the bacterial adhesion process, despite extensive research in this area. With QCM-D, multiple variables affecting bacterial adhesion can be studied, including the roles of substrate composition, chemical modification, solution ionic strength, environmental temperature, shear conditions, and time. Recent studies demonstrate the utility of QCM-D in developing new bacterial adhesion models and studying different stages of biofilm formation. We provide a review of how QCM-D has been used to study bacterial adhesion at stages ranging from the first step of bacterial adhesion to mature biofilms, and how QCM-D studies are being used to promote the development of solutions to biofilm formation.

Concentration-Dependent, Membrane-Selective Activity of Human LL37 Peptides Modified with Collagen Binding Domain Sequences.

Antimicrobial peptides (AMPs) such as LL37 are promising alternatives to antibiotics to treat wound infections due to their broad activity, immunomodulatory functions, and low likelihood of antimicrobial resistance. To deliver LL37 to chronic wounds, we developed two chimeric LL37 peptides with C-terminal collagen binding domains (CBD) derived from collagenase ( cCBD-LL37) and fibronectin ( fCBD-LL37) as a strategy for noncovalent tethering of LL37 onto collagen-based, commercially available wound dressings. The addition of CBD sequences to LL37 resulted in differences in cytotoxicity against human fibroblasts and antimicrobial activity against common wound pathogens. In this study, we sought to determine the sequence-, structure-, and concentration-dependent properties underlying these differences in bioactivity. Molecular dynamics (MD) simulations allowed visualization of the structure of each peptide and calculation of residue-level helicity, revealing that residues within the CBD domains were not helical. Circular dichroism (CD) spectroscopy affirmed that the overall structures of LL37 and each CBD-LL37 peptide was primarily helical (greater than 67%) in a membrane-like solvent. Quartz crystal microbalance with dissipation (QCM-D) and imaging of fluorescent bilayers revealed unique, concentration-dependent interactions of each peptide with bilayers of different lipid compositions. Specifically, fCBD-LL37, which is less cytotoxic than LL37 and cCBD-LL37, demonstrated higher affinity toward anionic bilayers (model bacterial cell membranes) than zwitterionic bilayers (model mammalian cell membranes). In contrast, cCBD-LL37 and LL37 demonstrated similar affinities to both types of bilayers. This study demonstrates that the combination of MD, CD, and QCM-D may enable predictive modeling of the effects of primary sequence alterations on peptide secondary structure and membrane interactions. Understanding the structural and mechanistic properties of AMPs and their interactions with specific lipid bilayer compositions may enable the engineering of less cytotoxic AMPs with improved therapeutic indexes for human wound healing applications.

A QCM-D study of the concentration- and time-dependent interactions of human LL37 with model mammalian lipid bilayers.

The human antimicrobial peptide LL37 is promising as an alternative to antibiotics due to its biophysical interactions with charged bacterial lipids. However, its clinical potential is limited due to its interactions with zwitterionic mammalian lipids leading to cytotoxicity. Mechanistic insight into the LL37 interactions with mammalian lipids may enable rational design of less toxic LL37-based therapeutics. To this end, we studied concentration- and time-dependent interactions of LL37 with zwitterionic model phosphatidylcholine (PC) bilayers with quartz crystal microbalance with dissipation (QCM-D). LL37 mass adsorption and PC bilayer viscoelasticity changes were monitored by measuring changes in frequency (Δf) and dissipation (ΔD), respectively. The Voigt-Kelvin viscoelastic model was applied to Δf and ΔD to study changes in bilayer thickness and density with LL37 concentration. At low concentrations (0.10-1.00 µM), LL37 adsorbed onto bilayers in a concentration-dependent manner. Further analyses of Δf, ΔD and thickness revealed that peptide saturation on the bilayers was a threshold for interactions observed above 2.00 µM, interactions that were rapid, multi-step, and reached equilibrium in a concentration- and time-dependent manner. Based on these data, we proposed a model of stable transmembrane pore formation at 2.00-10.0 µM, or transition from a primarily lipid to a primarily protein film with a transmembrane pore formation intermediate state at concentrations of LL37 > 10 µM. The concentration-dependent interactions between LL37 and PC bilayers correlated with the observed concentration-dependent biological activities of LL37 (antimicrobial, immunomodulatory and non-cytotoxic at 0.1-1.0 µM, hemolytic and some cytotoxicity at 2.0-13 µM and cytotoxic at >13 µM).

Collagen tethering of synthetic human antimicrobial peptides cathelicidin LL37 and its effects on antimicrobial activity and cytotoxicity.

Wound infections, particularly of chronic wounds, pose a substantial challenge for designing antimicrobial dressings that are both effective against pathogens, and do not interfere with wound healing. Due to their broad-spectrum antimicrobial and immunomodulatory activities, naturally-occurring antimicrobial peptides (AMPs) are promising alternative treatments. However, their cytotoxicity at high concentrations and poor stability hinders their clinical use. To mitigate these undesirable properties, we investigated the effects of tethering human AMP cathelicidin LL37 to collagen, one of the main extracellular matrix proteins in wound sites, secreted by fibroblasts, and in commercially-available wound dressings. The active domain of human AMP cathelicidin, LL37, and two chimeric peptides containing LL37 fused to collagen binding domains (derived from collagenase - cCBD-LL37 or fibronectin - fCBD-LL37) were synthesized and adsorbed to PURACOL® type I collagen scaffolds. After 14days, 73%, 81% and 99% of LL37, cCBD-LL37 and fCBD-LL37, respectively, was retained on the scaffolds and demonstrated undiminished antimicrobial activity when challenged with both Gram-positive and Gram-negative bacterial strains. Loaded scaffolds were not cytotoxic to fibroblasts despite retaining peptides at concentrations 24 times higher than the reported cytotoxic concentrations in solution. These findings indicate that biopolymer-tethered AMPs may represent a viable alternative for preventing and treating wound infection while also supporting tissue repair. STATEMENT OF SIGNIFICANCE: Over 6.5million people annually in the United States suffer chronic wounds; many will become infected with antibiotic-resistant bacteria. Treatments used to prevent and fight infection are toxic and may hinder wound healing. AMPs are broad-spectrum antimicrobials that also promote healing; however, their instability and toxicity are major challenges. To overcome treatment gaps, we functionalized collagen scaffolds with chimeric antimicrobial peptides (AMPs) with collagen binding domains to create antimicrobial and non-cytotoxic scaffolds that may promote healing. This is the first report of CBD-mediated delivery of AMPs onto collagen scaffolds that demonstrates no cytotoxicity toward fibroblasts. This study also suggests that retention of antimicrobial activity is CBD-dependent, which provides foundations for fundamental studies of CBD-AMP mechanisms and clinical explorations.

Atomic force microscopy-guided fractionation reveals the influence of cranberry phytochemicals on adhesion of Escherichia coli.

Cranberry juice has been long used to prevent infections because of its effect on the adhesion of the bacteria to the host surface. Proanthocyanidins (PACs) comprise of one of the major classes of phytochemicals found in cranberry, which have been extensively studied and found effective in combating adhesion of pathogenic bacteria. The role of other cranberry constituents in impacting bacterial adhesion haven't been studied very well. In this study, cranberry juice fractions were prepared, characterized and tested for their effect on the surface adhesion of the pathogenic clinical bacterial strain E. coli B78 and non-pathogenic control E. coli HB101. The preparations tested included crude cranberry juice extract (CCE); three fractions containing flavonoid classes including proanthocyanidins, anthocyanins and flavonols; selected sub-fractions, and commercially available flavonol glycoside, quercetin-3-O-galactoside. Atomic force microscopy (AFM) was used to quantify the adhesion forces between the bacterial surface and the AFM probe after the treatment with the cranberry fractions. Adhesion forces of the non-pathogenic, non fimbriated lab strain HB101 are small (average force 0.19 nN) and do not change with cranberry treatments, whereas the adhesion forces of the pathogenic, Dr adhesion E. coli strain B78 (average force of 0.42 nN) show a significant decrease when treated with cranberry juice extract or fractions (average force of 0.31 nN, 0.37 nN and 0.39 nN with CCE, Fraction 7 and Fraction 4 respectively). In particular, the fractions that contained flavonols in addition to PACs were more efficient at lowering the force of adhesion (average force of 0.31 nN-0.18 nN between different sub-fractions containing flavonols and PACs). The sub-fractions containing flavonol glycosides (from juice, fruit and commercial quercetin) all resulted in reduced adhesion of the pathogenic bacteria to the model probe. This strongly suggests the anti adhesive role of other classes of cranberry compounds in conjunction with already known PACs and may have implications for development of alternative anti bacterial treatments.

Proposed Mechanisms of Tethered Antimicrobial Peptide Chrysophsin-1 as a Function of Tether Length Using QCM-D.

Rising antibiotic resistance has led to a call for the development of alternative antibiotics. Antimicrobial peptides (AMPs) are promising, but their potential has not been fully explored because of toxicity and lack of stability in vivo. Multiple recent studies have focused on surface immobilization of AMPs to maximize antimicrobial activity and stability while mitigating toxicity. We covalently tethered cysteine-modified chrysophsin-1 (C-CHY1) via PEG of three molecular weights, 866, 2000, and 7500. Quartz crystal microbalance with dissipation (QCM-D) was used to characterize thickness and grafting density of tethered C-CHY1, which were related to its activity against Staphylococcus aureus and Escherichia coli and found to be important in determining mechanisms leading to activity. The PEG 866 tether promoted an antimicrobial mechanism that caused displacement of positive cations from bacterial membranes. The PEG 7500 tether maintained C-CHY1's ability to effectively form membrane pores, promoting the highest activity. When AMP was tethered with PEG 2000, antimicrobial activity was limited, apparently because neither mechanism of AMP activity was able to occur with this tether. Using QCM-D, we calculated thickness and density of PEG-tethered C-CHY1 and correlated it with antimicrobial effectiveness to determine the mechanisms by which tethered C-CHY1 acts against bacteria.

Effect of acyl chain length on therapeutic activity and mode of action of the CX-KYR-NH2 antimicrobial lipopeptide.

Peptide lipidation has proven to be an inexpensive and effective strategy for designing next-generation peptide-based drug compounds. In this study, the effect of the acyl chain length of ultrashort LiPs (CX-KYR-NH2; X=10, 12, 14 and 16) on their bacterial killing and membrane disruption kinetics was investigated. The geometric mean of the minimum inhibitory concentration (MIC) values for 4 pathogenic bacterial strains was 25 µM, with a selectivity index of 10.24 for C14-KYR-NH2. LiPs at all concentrations exhibited no cytotoxicity towards human erythrocytes, but towards Vero cells at 80 µM. All the LiPs adopted secondary structure in a membrane mimicking environment. C14-KYR-NH2 aggregated above 256 µM, while C16-KYR-NH2 did above 80 µM. All LiPs showed outer membrane permeabilization within 3 min after treatment, yet the extent and kinetics of inner membrane penetration and depolarization were dependent on the acyl chain length. Cell death subsequently occurred within 10 min, and killing activity appeared to correlate most with depolarization activity but not with outer or inner membrane permeability. AFM imaging of cells treated with C14-KYR-NH2 revealed rupture of the cell surface and cytosolic leakage depending on the length of incubation. This study highlights and follows the progression of events that occur during the membrane disintegration process over time, and determines the optimal amphipathicity of ultrashort LiPs with 12-14 carbon atoms for this membrane disrupting activity. The fast acting bactericidal properties of ultrashort LiPs with optimal chain lengths make them promising candidates for drug lead compounds.

Size dependence of gold nanoparticle interactions with a supported lipid bilayer: A QCM-D study.

Knowledge of nanoparticle (NP)-membrane interactions is important to advances in nanomedicine as well as for determining the safety of NPs to humans and the ecosystem. This study focuses on a unique mechanism of cytotoxicity, cell membrane destabilization, which is principally dependent on the nanoparticle nature of the material rather than on its molecular properties. We investigated the interactions of 2, 5, 10, and 40nm gold NPs with supported lipid bilayer (SLB) of L-α-phosphatidylcholine using quartz crystal microbalance with dissipation monitoring (QCM-D). Gold NPs were tested both in the absence of and in the presence of polymethacrylic acid (PMAA), used to simulate the natural organic matter (NOM) in the environment. In the absence of PMAA, for all NP sizes, we observed only small mass losses (1 to 6ng) from the membrane. This small lipid removal may be a free energy lowering mechanism to relieve stresses induced by the adsorption of NPs, with the changes too small to affect the membrane integrity. In the presence of PMAA, we observed a net mass increase in the case of smaller NPs. We suggest that the increased adhesion between the NP and the bilayer, promoted by PMAA, causes sufficient NP adsorption on the bilayer to overcompensate for any loss of lipid. The most remarkable observation is the significant mass loss (60ng) for the case of 40nm NPs. We attribute this to the lipid bilayer engulfing the NP and leaving the crystal surface. We propose a simple phenomenological model to describe the competition between the particle-bilayer adhesion energy, the bilayer bending energy, and the interfacial energy at bilayer defect edges. The model shows that the larger NPs, which become more adhesive because of the polymer adsorption, are engulfed by the bilayer and leave the crystal surface, causing large mass loss and membrane disruption. The QCM-D measurements thus offer direct evidence that even if NPs are intrinsically not cytotoxic, they can become cytotoxic in the presence of environmental organic matter which modulates the adhesive interactions between the nanoparticle and the membrane.

A high throughput MATLAB program for automated force-curve processing using the AdG polymer model.

Research in understanding biofilm formation is dependent on accurate and representative measurements of the steric forces related to brush on bacterial surfaces. A MATLAB program to analyze force curves from an AFM efficiently, accurately, and with minimal user bias has been developed. The analysis is based on a modified version of the Alexander and de Gennes (AdG) polymer model, which is a function of equilibrium polymer brush length, probe radius, temperature, separation distance, and a density variable. Automating the analysis reduces the amount of time required to process 100 force curves from several days to less than 2min. The use of this program to crop and fit force curves to the AdG model will allow researchers to ensure proper processing of large amounts of experimental data and reduce the time required for analysis and comparison of data, thereby enabling higher quality results in a shorter period of time.