RESUMEN
PURPOSE: In radioguided surgery (RGS), radiopharmaceuticals are used to generate preoperative roadmaps (e.g., PET/CT) and to facilitate intraoperative tracing of tracer avid lesions. Within RGS, there is a push toward the use of receptor-targeted radiopharmaceuticals, a trend that also has to align with the surgical move toward minimal invasive robotic surgery. Building on our initial ex vivo evaluation, this study investigates the clinical translation of a DROP-IN ß probe in robotic PSMA-guided prostate cancer surgery. METHODS: A clinical-grade DROP-IN ß probe was developed to support the detection of PET radioisotopes (e.g., 68 Ga). The prototype was evaluated in 7 primary prostate cancer patients, having at least 1 lymph node metastases visible on PSMA-PET. Patients were scheduled for radical prostatectomy combined with extended pelvic lymph node dissection. At the beginning of surgery, patients were injected with 1.1 MBq/kg of [68Ga]Ga-PSMA. The ß probe was used to trace PSMA-expressing lymph nodes in vivo. To support intraoperative decision-making, a statistical software algorithm was defined and optimized on this dataset to help the surgeon discriminate between probe signals coming from tumors and healthy tissue. RESULTS: The DROP-IN ß probe helped provide the surgeon with autonomous and highly maneuverable tracer detection. A total of 66 samples (i.e., lymph node specimens) were analyzed in vivo, of which 31 (47%) were found to be malignant. After optimization of the signal cutoff algorithm, we found a probe detection rate of 78% of the PSMA-PET-positive samples, a sensitivity of 76%, and a specificity of 93%, as compared to pathologic evaluation. CONCLUSION: This study shows the first-in-human use of a DROP-IN ß probe, supporting the integration of ß radio guidance and robotic surgery. The achieved competitive sensitivity and specificity help open the world of robotic RGS to a whole new range of radiopharmaceuticals.
Asunto(s)
Algoritmos , Neoplasias de la Próstata , Procedimientos Quirúrgicos Robotizados , Cirugía Asistida por Computador , Humanos , Masculino , Neoplasias de la Próstata/cirugía , Neoplasias de la Próstata/diagnóstico por imagen , Cirugía Asistida por Computador/métodos , Procedimientos Quirúrgicos Robotizados/métodos , Tomografía Computarizada por Tomografía de Emisión de Positrones/métodos , Anciano , Radiofármacos , Radioisótopos de Galio , Partículas beta , Persona de Mediana Edad , Glutamato Carboxipeptidasa II/metabolismo , Isótopos de Galio , Prostatectomía , Metástasis Linfática/diagnóstico por imagenRESUMEN
Allodynia is a neuropathic pain triggered by a normally painless stimulus: for example, a slight touch on the skin or slight sensation of hot or cold is extremely painful. Rehabilitation is long and uncertain. Protecting the painful area from stimuli is a priority of care. This type of care is complex and challenging for the care team: the pain caused in manufacturing a classic molded orthosis is unbearable for the patient, and the orthosis has a limited lifetime, and experience shows that it is not possible to produce two identical splints. The present study consisted in creating protective splints by 3D printing, designed from data collected with the 3D surface scanner used in our forensic imaging and anthropology unit. The pros and cons of the 3D orthosis versus standard molded orthoses from the point of view of the patient and the practitioner are discussed, with evaluation of related indications of this technology.
Asunto(s)
Diseño de Equipo , Hiperalgesia , Impresión Tridimensional , Férulas (Fijadores) , HumanosRESUMEN
Virtual Anthropology (VA) transposes the traditional methods of physical anthropology to virtual environments using imaging techniques and exploits imaging technologies to devise new methodological protocols. In this research, we investigate whether the measurements used in the Diagnose Sexuelle Probabiliste (DSP) and Ischio-Pubic Index (IPI) differ significantly when 3D models of a bone are generated using 3D surface scans (3DSS) and Multidetector Computed Tomography (MDCT) scans. Thirty pelvises were selected from the SIMON identified skeletal collection. An equal ratio of females to males was sought, as well as a good preservation of the bones. The pelvises were scanned using an MDCT scanner and a 3D surface scanner. The measurements of the DSP and IPI methods on the dry bones (referred to as macroscopic measurements here), and then to the 3D models. The intra- and interobserver, using the Technical Error of Measurement (TEM) and relative Technical Error of Measurement (rTEM) error was assessed, and we aimed to observe if the measurements made on the MDCT and 3DSS generated models were significantly different from those taken on the dry bones. Additionally, the normality of the data was tested (Shapiro-Wilk test) and the differences in measurements was evaluated using parametric (Student t-tests) and non-parametric (Wilcoxon) tests. The TEM and rTEM calculations show high intra and interobserver consistency in general. However, some measurements present insufficient inter- and intraobserver agreement. Student t and Wilcoxon tests indicate potentially significant differences of some measurements between the different environments. The results show that especially in the virtual environment, it is not easy to find the right angle for some of the DSP measurements, However, when comparing the measurement differences between dry and virtual bones, the results show that most of the differences are less than or equal to 2.5 mm. Considering the IPI, the landmarks are already difficult to determine on the dry bone, but they are even more difficult to locate in the virtual environment. Nevertheless, this study shows that quantitative methods may be better suited for application in the virtual environment, but further research using different methods is needed.
Asunto(s)
Imagenología Tridimensional , Tomografía Computarizada Multidetector , Masculino , Femenino , Humanos , Antropología Forense/métodos , Hueso Púbico , HuesosRESUMEN
One of the many challenging cases that forensic pathologists, anthropologists, and forensic imaging experts have to face are burnt human remains. Perpetrators frequently attempt to hide/destroy evidence and make the body unidentifiable by exposing it to fire. We present a case of a partially burnt body found in an apartment after an explosion. First, multidetector computed tomography (MDCT) images and the following autopsy revealed several lesions on the cranium. Forensic anthropologists were involved in order to specify the aetiology of the lesions observed on the cranium. Through an interdisciplinary approach bringing together MDCT scans, 3D surface scans, and anthropological analysis, it was possible to answer the questions raised during the autopsy. Analyses demonstrated that there were signs of blunt force trauma on the cranium vault that the perpetrator likely attempted to hide by exposing the body to fire. This case demonstrates the importance of close collaboration between forensic anthropologists, imaging experts, and forensic pathologists. This multidisciplinary approach allows for a better, more complete reconstitution of forensic cases. Key points: The analyses of burnt human remains are one of the many challenging tasks that forensic pathologists and anthropologists have to face.We present an occurrence of a partially burnt body after an explosion and forensic anthropologists were asked whether the nature of the lesions observed on the cranium could be further specified.Anthropological analyses of the skull were consistent with the radiological and autopsy report. It was possible to reconstruct the various lesions on the dry bone.The case demonstrates the importance of an interdisciplinary approach and the close collaboration between forensic anthropologists, imaging experts, and forensic pathologists.
RESUMEN
During a Disaster Victims Identification (DVI) mission, international protocols rely on interdisciplinary work, especially between specialists from forensic imaging and anthropology. In case of air crashes or explosions, DVI units may face thousands of fragmented human remains (FHRs). The physical re-association of FHRs and the identification process is very complex and challenging, and relies upon expensive and destructive DNA analysis. A virtual re-association (VRA) of these fragments, using Multidetector Computed Tomography (MDCT), could be a helpful tool in forensic anthropology analysis, as it could assist in reducing the number of DNA samples. However, there is no standardized protocol for including such an approach into a DVI procedure. The aim of this study was to summarize and analyze existing techniques through a systematic review and to develop a protocol for virtual re-association of FHRs, adapted to the DVI context. A keyword-based literature search was conducted, focusing on the VRA methods using MDCT imaging and 3D surface scan methodology. Reviews and primary articles, published between 2005 and 2020 in the fields of forensic anthropology, paleoanthropology, archeology, and fracture reduction surgery were sorted out. A total of 45 publications were selected and analyzed based on their content and relevance. The results show that research on the re-association of FHRs increased significantly during the last five years. Seven steps regarding the MDCT-based method for the virtual re-association of FHRs could be identified: acquisition of 3D-images, segmentation of the MDCT-data, post-processing and surface generation, identification of intact and fracture surfaces, identification and registration of matching fragments, and validation of the re-association. The literature is surprisingly sparse regarding the FHRs re-association as a forensic tool, and mainly consists in case reports, whereas validated methods were presented in archeology and surgery publications. However, we were able to adapt the MDCT-based approach for the virtual re-association of the FHRs and propose an innovative protocol for DVI missions. This protocol includes the needed details, from the acquisition of MDCT imaging to the virtual re-association of 3D models and its validation. Each step has to be fully tested, adapted and validated in future studies.
Asunto(s)
Restos Mortales , Víctimas de Desastres , Medicina Legal , ADN , Antropología Forense , HumanosRESUMEN
In traffic accidents, the differentiation of run-over and other injuries is crucial because questions about the origin of fatal injuries often arise. It is sometimes difficult for forensic pathologists to answer them due to the superimposition of injuries or competing, potentially fatal findings. Therefore, using morphometric three-dimensional (3D) reconstructions offers new perspectives based on an interdisciplinary evaluation of all findings and traces. The morphometric 3D reconstruction includes the allocation of patterned injuries or transferred material, the determination of the origin of injuries as well as the reconstruction of the incident. The generated 3D models of persons, clothes, vehicles, incident sites and relevant objects resulting from forensic imaging, photogrammetry, 3D structured-light and laser scanning are included, as are all detected traces and damages. Three case studies are presented to illustrate the possibilities and results of morphometric 3D reconstruction. Run-over accidents have received less attention than the topic of pedestrian, bicycle and motorbike accident analysis for which there is a large body of literature. Our goal is to add to the understanding of run-over accidents using morphometric reconstruction in order to improve their analysis in the future. The possibilities of morphometric reconstructions by means of 3D techniques in run-over accidents are wide-ranging and can provide new, unexpected and significant insights.
Asunto(s)
Accidentes de Tránsito , Simulación por Computador , Medicina Legal/métodos , Imagenología Tridimensional , Peatones , Humanos , Rayos Láser , Imagen por Resonancia Magnética , Masculino , Fotogrametría , Programas Informáticos , Tomografía Computarizada por Rayos X , Heridas y Lesiones/patologíaRESUMEN
Virtual anthropology (VA) is based on applying anthropological methods currently used to analyse bones to 3D models of human remains. While great advances have been made in this endeavour in the past decade, several interrogations concerning how reliable these models are and what their proper use should be remain unanswered. In this research, a fundamental assumption of VA has been investigated: if the way we perceive and apply an anthropological method is truly similar when looking at bones macroscopically and through various 3D media. In order to answer, 10 skulls of known age and sex were scanned using a computed tomography (CT) scanner and a 3D surface scanner. Two observers separately applied a defined staging method to eight suture sites on these skulls, first looking at the bone macroscopically, then at the 3D surface scan, and finally on the CT scan. Two rounds of observation were carried out by each observer. Intra- and inter-observer error were evaluated, and two sample t-tests used to evaluate if the different types of medium used yielded significantly different observations. The results show a high degree of inter-observer error, and that data obtained from 3D surface scans differ from macroscopic observation (confidence level 95%, P ≤ 0.05). CT scans, in these settings, yielded results comparable to those obtained through macroscopic observations. These results offer many possibilities for future research, including indications on the kind of anthropological methods and anatomical landmarks that might be reliably transferable to the virtual environment. All current methods used in traditional anthropology should be tested, and if they prove unreliable, new techniques to analyse bones from virtual models should be developed.Key pointsLarge discrepancies between observation on dry bones and computer-generated 3D models (surface scans or CT scans) could lead to the re-evaluation of the suitability of traditional anthropological methods for application on 3D models.This preliminary study evaluates whether macroscopic, 3D surface scans, and CT scans viewings generate different observations.The results indicate that the data are not always coherent across all three media of observation.Explanations include the aspect given to the bone by the 3D software, differences between handling bones in real life versus on a computer, and level of expertise of the observers.
RESUMEN
3D surface scanning is a technique brought forward for wound documentation and analysis in order to identify injury-causing tools in legal medicine and forensic science. Although many case reports have been published, little is known about the methodology employed by the authors. The study reported here is exploratory in nature, and its main purpose was to get a first evaluation of the ability of an operator, by means of 3D surface scanning and following a simple methodology, to correctly exclude or associate an incriminated tool as the source of a mock wound. Based on these results, an assessment of the possibility to define a structured methodology that could be suitable for this use was proposed. Blunt tools were used to produce 'wounds' on watermelons. Both wounds and tools were scanned with a non-contact optical surface 3D digitising system. Analysis of the obtained 3D models of wounds and tools was undertaken separately. This analytical phase was followed by a qualitative and a quantitative comparison. Results showed that in more than half of the cases, we obtained a correct association but the prevalence of wrong association was still high due to mark deformation and other limitations. Even if the findings of this exploratory study cannot be generalised, they suggest that the simple and direct comparison process is not reliable enough for a systematic routine application. The article highlights the importance of an analysis phase preceding the comparison step. Limitations of the technique, ensuring needs and possible paths for improvement are also expounded.
Asunto(s)
Medicina Legal/métodos , Imagenología Tridimensional/métodos , Fotogrametría/métodos , Heridas y Lesiones/patología , Autopsia/métodos , Diseño Asistido por Computadora , Humanos , Tomografía Computarizada por Rayos XRESUMEN
Three-dimensional (3D) measurement techniques are gaining importance in many areas. The latest developments brought more cost-effective, user-friendly, and faster technologies onto the market. Which 3D techniques are suitable in the field of forensic medicine and what are their advantages and disadvantages? This wide-ranging study evaluated and validated various 3D measurement techniques for the forensic requirements. High-tech methods as well as low-budget systems have been tested and compared in terms of accuracy, ease of use, expenditure of time, mobility, cost, necessary knowhow, and their limitations. Within this study, various commercial measuring systems of the different techniques were tested. Based on the first results, one measuring system was selected for each technique, which appeared to be the most suitable for the forensic application or is already established in forensic medicine. A body of a deceased, a face and an injury of a living person, and a shoe sole were recorded by 11 people with different professions and previous knowledge using the selected systems. The results were assessed and the personal experiences were evaluated using a questionnaire. In addition, precision investigations were carried out using test objects. The study shows that the hand-held scanner and photogrammetry are very suitable for the 3D documentation of forensic medical findings. Their moderate acquisition costs and easy operation could lead to more frequent application in forensic medicine in the future. For special applications, the stripe-light scanner still has its justification due to its high precision, the flexible application area, and the high reliability. The results show that, thanks to the technological advances, the 3D measurement technology will have more and more impact on the routine of the forensic medical examination.
Asunto(s)
Documentación/métodos , Imagenología Tridimensional , Heridas y Lesiones/diagnóstico por imagen , Medicina Legal , Humanos , Luz , Fotogrametría , Tomografía Computarizada por Rayos XRESUMEN
BACKGROUND: This anatomic study investigated the distal humeral articular surface exposure achievable through a triceps-sparing oblique extra-articular osteotomy of the olecranon with a step-cut modification compared with the anconeus flap transolecranon apex distal chevron osteotomy. In addition, the bone contact surface areas of the osteotomized surfaces after transolecranon and extra-articular osteotomies were compared. METHODS: Seven pairs of fresh adult cadaveric elbow joints were examined. Each of the right elbows underwent triceps-sparing extra-articular step-cut olecranon osteotomy (SCOOT) with an anconeus flap, and the left elbows underwent the anconeus flap transolecranon apex distal chevron osteotomies (CO). The articular surface exposed by each of the osteotomy techniques was then digitally analyzed using a 3-dimensional measurement system. The bone contact surface area of the osteotomized surfaces was also assessed. RESULTS: The percentage of total joint exposed by the SCOOT group was less than the CO group (SCOOT: 64% ± 3% vs. CO: 73% ± 3%; P = .002). There was significantly greater bone contact surface area of the osteotomized surfaces in the SCOOT group compared with the CO group (SCOOT: 1172 ± 251 mm2 vs. CO: 457 ± 133 mm2; P = .002). CONCLUSION: The triceps SCOOT procedure with an anconeus flap provides excellent distal humeral articular surface exposure with the added benefit of a substantially increased (2.6-times) bone contact surface area of the osteotomized surfaces.
Asunto(s)
Fracturas del Húmero/cirugía , Olécranon/cirugía , Colgajos Quirúrgicos , Cadáver , Articulación del Codo/anatomía & histología , Articulación del Codo/cirugía , Fijación Interna de Fracturas/métodos , Humanos , Músculo Esquelético/cirugía , Olécranon/anatomía & histología , Osteotomía/métodosRESUMEN
Modern post-mortem investigations use an increasing number of digital imaging methods, which can be collected under the term "post-mortem imaging". Most methods of forensic imaging are from the radiology field and are therefore techniques that show the interior of the body with technologies such as X-ray or magnetic resonance imaging. To digitally image the surface of the body, other techniques are regularly applied, e.g. three-dimensional (3D) surface scanning (3DSS) or photogrammetry. Today's most frequently used techniques include post-mortem computed tomography (PMCT), post-mortem magnetic resonance imaging (PMMR), post-mortem computed tomographic angiography (PMCTA) and 3DSS or photogrammetry. Each of these methods has specific advantages and limitations. Therefore, the indications for using each method are different. While PMCT gives a rapid overview of the interior of the body and depicts the skeletal system and radiopaque foreign bodies, PMMR allows investigation of soft tissues and parenchymal organs. PMCTA is the method of choice for viewing the vascular system and detecting sources of bleeding. However, none of those radiological methods allow a detailed digital view of the body's surface, which makes 3DSS the best choice for such a purpose. If 3D surface scanners are not available, photogrammetry is an alternative. This review article gives an overview of different imaging techniques and explains their applications, advantages and limitations. We hope it will improve understanding of the methods.
RESUMEN
Three-dimensional surface scanning (3DSS) and multi-detector computed tomography (MDCT) are two techniques that are used in legal medicine for digitalizing objects, a body or body parts such as bones. While these techniques are more and more commonly employed, surprisingly little information is known about the quality rendering of digitalized three-dimensional (3D) models provided by each of them. This paper presents findings related to the measurement precision of 3D models obtained through observation of a study case, where a fractured skull reconstructed by an anthropologist was digitalized using both post-mortem imaging methods. Computed tomography (CT) scans were performed using an 8-row MDCT unit with two different slice thicknesses. The variability of 3D CT models superimposition allowed to assess the reproducibility and robustness of this digitalization technique. Furthermore, two 3D surface scans were done using a professional high resolution 3D digitizer. The comparison of 3D CT-scans with 3D surface scans by superimposition demonstrated several regions with significant differences in topology (average difference between +1.45 and -1.22 mm). When comparing the reproducibility between these two digitalizing techniques, it appeared that MDCT 3D models led in general to greater variability for measurement precision between scanned surfaces. Also, the reproducibility was better achieved with the 3D surface digitizer, showing 3D models with fewer and less pronounced differences (from +0.32 to -0.31 mm). These experiments suggest that MDCT provides less reproducible body models than 3D surface scanning. But further studies must be undertaken in order to corroborate this first impression, and possibly explain the reason for these findings.
RESUMEN
Rockfall protection barriers are connected to the ground using steel cables fixed with anchors and foundations for the steel posts. It is common practice to measure the forces in the cables, while to date measurements of forces in the foundations have been inadequately resolved. An overview is presented of existing methods to measure the loads on the post foundations of rockfall protection barriers. Addressing some of the inadequacies of existing approaches, a novel sensor unit is presented that is able to capture the forces acting on post foundations in all six degrees of freedom. The sensor unit consists of four triaxial force sensors placed between two steel plates. To correctly convert the measurements into the directional forces acting on the foundation a special in-situ calibration procedure is proposed that delivers a corresponding conversion matrix.
RESUMEN
This study evaluated the feasibility of documenting patterned injury using three dimensions and true colour photography without complex 3D surface documentation methods. This method is based on a generated 3D surface model using radiologic slice images (CT) while the colour information is derived from photographs taken with commercially available cameras. The external patterned injuries were documented in 16 cases using digital photography as well as highly precise photogrammetry-supported 3D structured light scanning. The internal findings of these deceased were recorded using CT and MRI. For registration of the internal with the external data, two different types of radiographic markers were used and compared. The 3D surface model generated from CT slice images was linked with the photographs, and thereby digital true-colour 3D models of the patterned injuries could be created (Image projection onto CT/IprojeCT). In addition, these external models were merged with the models of the somatic interior. We demonstrated that 3D documentation and visualization of external injury findings by integration of digital photography in CT/MRI data sets is suitable for the 3D documentation of individual patterned injuries to a body. Nevertheless, this documentation method is not a substitution for photogrammetry and surface scanning, especially when the entire bodily surface is to be recorded in three dimensions including all external findings, and when precise data is required for comparing highly detailed injury features with the injury-inflicting tool.
Asunto(s)
Imagenología Tridimensional , Fotograbar , Heridas y Lesiones/diagnóstico por imagen , Estudios de Factibilidad , Humanos , Imagen por Resonancia Magnética , Fotogrametría , Tomografía Computarizada por Rayos XRESUMEN
Bite mark analysis offers the opportunity to identify the biter based on the individual characteristics of the dentitions. Normally, the main focus is on analysing bite mark injuries on human bodies, but also, bite marks in food may play an important role in the forensic investigation of a crime. This study presents a comparison of simulated bite marks in different kinds of food with the dentitions of the presumed biter. Bite marks were produced by six adults in slices of buttered bread, apples, different kinds of Swiss chocolate and Swiss cheese. The time-lapse influence of the bite mark in food, under room temperature conditions, was also examined. For the documentation of the bite marks and the dentitions of the biters, 3D optical surface scanning technology was used. The comparison was performed using two different software packages: the ATOS modelling and analysing software and the 3D studio max animation software. The ATOS software enables an automatic computation of the deviation between the two meshes. In the present study, the bite marks and the dentitions were compared, as well as the meshes of each bite mark which were recorded in the different stages of time lapse. In the 3D studio max software, the act of biting was animated to compare the dentitions with the bite mark. The examined food recorded the individual characteristics of the dentitions very well. In all cases, the biter could be identified, and the dentitions of the other presumed biters could be excluded. The influence of the time lapse on the food depends on the kind of food and is shown on the diagrams. However, the identification of the biter could still be performed after a period of time, based on the recorded individual characteristics of the dentitions.