RESUMEN
The bacterial infection and poor osseointegration of Ti implants could significantly compromise their applications in bone repair and replacement. Based on the carrier separation ability of the heterojunction and the redox reaction of pseudocapacitive metal oxides, we report an electrically responsive TiO2-SnO2-RuO2 coating with a multilayered heterostructure on a Ti implant. Owing to the band gap structure of the TiO2-SnO2-RuO2 coating, electron carriers are easily enriched at the coating surface, enabling a response to the endogenous electrical stimulation of the bone. With the formation of SnO2-RuO2 pseudocapacitance on the modified surface, the postcharging mode can significantly change the surface chemical state of the coating due to the redox reaction, enhancing the antibacterial ability and osteogenesis-related gene expression of the human bone marrow mesenchymal stem cells. Owing to the attraction for Ca2+, only the negatively postcharged SnO2@RuO2 can promote apatite deposition. The in vivo experiment reveals that the S-SnO2@RuO2-NP could effectively kill the bacteria colonized on the surface and promote osseointegration with the synostosis bonding interface. Thus, negatively charging the electrically responsive coating of TiO2-SnO2-RuO2 is a good strategy to endow modified Ti implants with excellent antibacterial ability and osseointegration.
Asunto(s)
Antibacterianos , Materiales Biocompatibles Revestidos , Oseointegración , Compuestos de Estaño , Titanio , Titanio/química , Titanio/farmacología , Oseointegración/efectos de los fármacos , Antibacterianos/farmacología , Antibacterianos/química , Humanos , Materiales Biocompatibles Revestidos/química , Materiales Biocompatibles Revestidos/farmacología , Compuestos de Estaño/química , Compuestos de Estaño/farmacología , Animales , Compuestos de Rutenio/química , Compuestos de Rutenio/farmacología , Células Madre Mesenquimatosas/efectos de los fármacos , Células Madre Mesenquimatosas/citología , Células Madre Mesenquimatosas/metabolismo , Staphylococcus aureus/efectos de los fármacos , Propiedades de Superficie , Osteogénesis/efectos de los fármacosRESUMEN
Thin, flexible, and electrically conductive films are in demand for electromagnetic interference (EMI) shielding. Two-dimensional NbSe2 monolayers have an electrical conductivity comparable to those of metals (106-107 S m-1) but are challenging for high-quality and scalable production. Here, we show that electrochemical exfoliation of flake NbSe2 powder produces monolayers on a large scale (tens of grams), at a high yield (>75%, monolayer), and with a large average lateral size (>20 µm). The as-exfoliated NbSe2 monolayer flakes are easily dispersed in diverse organic solvents and solution-processed into various macroscopic structures (e.g., free-standing films, coatings, patterns, etc.). Thermal annealing of the free-standing NbSe2 films reduces the interlayer distance of restacked NbSe2 from 1.18 to 0.65 nm and consequently enhances the electrical conductivity to 1.16 × 106 S m-1, which is superior to those of MXenes and reduced graphene oxide. The optimized NbSe2 film shows an EMI shielding effectiveness (SE) of 65 dB at a thickness of 5 µm (>110 dB for a 48-µm-thick film), among the highest in materials of similar thicknesses. Moreover, a laminate of two layers of the NbSe2 film (2 µm thick) with an insulating interlayer shows a high SE of 85 dB, surpassing that of the 20-µm-thick NbSe2 film (83 dB). A two-layer theoretical model is proposed, and it agrees with the experimental EMI SE of the laminated NbSe2 films. The ability to produce NbSe2 monolayers on a tens of grams scale will enable their diverse applications beyond EMI shielding.
RESUMEN
BACKGROUND: Diabetes is an important risk factor for cardiovascular disease (CVD), but in the non-diabetic population, high glucose values within the normal range are also positively associated with CVD risk. There is a lack of concern for people without diabetes and evidence is lacking regarding the association between changes in cardiovascular health score (CVHS) and CVD risk in the non-diabetic population. METHODS: The current study included 37,970 non-diabetic participants free of CVD events in or before 2010 from the Kailuan Study and calculated CVHS according to the overall status of 7 cardiovascular health metrics between the 2006 and 2010 waves. Latent mixture models were used to explore the subgroups with different development trends included in the context of the Kailuan non-diabetic population and to identify the trajectory of each subgroup. The outcomes of the current study were CVD events, including myocardial infarction and stroke. CVHS trajectory was developed to predict subsequent CVD risk from 2010 to 2020. The Cox proportional hazard model was established to calculate the hazard ratios (HRs) and 95% confidence intervals (CIs) of CVD across different trajectory patterns. RESULTS: Five distinct CVHS trajectory patterns were identified, including low-stable pattern (n = 2835), moderate-increasing pattern (n = 3492), moderate-decreasing pattern (n = 7526), high-stable I pattern (n = 17,135), and high-stable II pattern (n = 6982). Compared with the low-stable pattern, participants with the high-stable II pattern had a lower subsequent risk of CVD (HR = 0.22, 95%CI = 0.18-0.28); In stratification analysis, the lower risk for CVD was observed in females (HR = 0.10, 95%CI = 0.05-0.23, P for interaction < 0.05) and those aged < 60 years (HR = 0.16, 95%CI = 0.11 to 0.22, P for interaction < 0.05). CONCLUSIONS: CVHS trajectory patterns were associated with an altered CVD risk in the non-diabetic population. When stratified by age and sex, the association was stronger in young adults and females.
Asunto(s)
Enfermedades Cardiovasculares , Diabetes Mellitus , Femenino , Adulto Joven , Humanos , Enfermedades Cardiovasculares/epidemiología , Enfermedades Cardiovasculares/etiología , Estudios de Cohortes , Estudios Prospectivos , Diabetes Mellitus/epidemiología , Factores de RiesgoRESUMEN
Isocitrate dehydrogenase (IDH) is one of the most important genotypes in patients with glioma because it can affect treatment planning. Machine learning-based methods have been widely used for prediction of IDH status (denoted as IDH prediction). However, learning discriminative features for IDH prediction remains challenging because gliomas are highly heterogeneous in MRI. In this paper, we propose a multi-level feature exploration and fusion network (MFEFnet) to comprehensively explore discriminative IDH-related features and fuse different features at multiple levels for accurate IDH prediction in MRI. First, a segmentation-guided module is established by incorporating a segmentation task and is used to guide the network in exploiting features that are highly related to tumors. Second, an asymmetry magnification module is used to detect T2-FLAIR mismatch sign from image and feature levels. The T2-FLAIR mismatch-related features can be magnified from different levels to increase the power of feature representations. Finally, a dual-attention feature fusion module is introduced to fuse and exploit the relationships of different features from intra- and inter-slice feature fusion levels. The proposed MFEFnet is evaluated on a multi-center dataset and shows promising performance in an independent clinical dataset. The interpretability of the different modules is also evaluated to illustrate the effectiveness and credibility of the method. Overall, MFEFnet shows great potential for IDH prediction.
RESUMEN
The addition of graphene has been reported as a potential route to enhance the thermoelectric performance of SrTiO3. However, the interplay between processing parameters and graphene addition complicates understanding this enhancement. Herein, we examine the effects of processing parameters and graphene addition on the thermoelectric performance of La-doped SrTiO3 (LSTO). Briefly, two types of graphene oxide (GO) at different oxidation degrees were used, while the LSTO pellets were densified under two conditions with different reducing strengths (with/without using oxygen-scavenging carbon powder bed muffling). Raman imaging of the LSTO green body and sintered pellets suggests that the added GO sacrificially reacts with the lattice oxygen, which creates more oxygen vacancies and improves electrical conductivity regardless of the processing conditions. The addition of mildly oxidized electrochemical GO (EGO) yields better performance than the conventional heavily oxidized chemical GO (CGO). Moreover, we found that muffling the green body with an oxygen-scavenging carbon powder bed during sintering is vital to achieving a single-crystal-like temperature dependence of electrical conductivity, implying that a highly reducing environment is critical for eliminating the grain boundary barriers. Combining 1.0 wt % EGO addition with a highly reducing environment leads to the highest electrical conductivity of 2395 S cm-1 and power factor of 2525µW m-1 K-2 at 300 K, with an improved average zT value across the operating temperature range of 300-867 K. STEM-EELS maps of the optimized sample show a pronounced depletion of Sr and evident deficiency of O and La at the grain boundary region. Theoretical modeling using a two-phase model implies that the addition of GO can effectively improve carrier mobility in the grain boundary phase. This work provides guidance for the development of high-performance thermoelectric ceramic oxides.
RESUMEN
The bacterial colonization and poor osseointegration of Ti implants significantly compromise their applications in load-bearing bone repair and replacement. To endorse the Ti with both excellent bioactivity and antibacterial ability, we developed a microarc oxidation coating that was modified uniformly by hydroxyapatite (HA) nanodots arrays and loaded regionally with chitosan hydrogel containing ciprofloxacin. The bonding between the HA nanodots covered coating and the chitosan hydrogel is further enhanced via silanization and chemical grafting of glutaraldehyde. Benefiting from the regionally loaded structure of the chitosan hydrogel, the chitosan hydrogel unloaded area can promote the cell adhesion and proliferation with excellent bioactivity, though relatively low OD value of cck8 has been observed at the beginning of the cell culturing. Whereas, the OD value of cck8 rises with the prolongation of the cell culturing time due to the degradation of the regionally loaded chitosan hydrogel. With the help of the laden ciprofloxacin in chitosan hydrogels, the sample effectively sterilizes the bacterial with a bacteriostatic ring. Therefore, regional loading of chitosan hydrogel containing ciprofloxacin on the modified microarc oxidation coating is a good approach to endorse Ti with both excellent bioactivity and antibacterial ability.
RESUMEN
BACKGROUND AND OBJECTIVE: Glioma segmentation is an important procedure for the treatment plan and follow-up evaluation of patients with glioma. UNet-based networks are widely used in medical image segmentation tasks and have achieved state-of-the-art performance. However, context information along the third dimension is ignored in 2D convolutions, whereas difference between z-axis and in-plane resolutions is large in 3D convolutions. Moreover, an original UNet structure cannot capture fine details because of the reduced resolution of feature maps near bottleneck layers. METHODS: To address these issues, a novel 2D-3D cascade network with multiscale information module is proposed for the multiclass segmentation of gliomas in multisequence MRI images. First, a 2D network is applied to fully exploit potential intra-slice features. A variational autoencoder module is incorporated into 2D DenseUNet to regularize a shared encoder, extract useful information, and represent glioma heterogeneity. Second, we integrated 3D DenseUNet with the 2D network in cascade mode to extract useful inter-slice features and alleviate the influence of large difference between z-axis and in-plane resolutions. Moreover, a multiscale information module is used in the 2D and 3D networks to further capture the fine details of gliomas. Finally, the whole 2D-3D cascade network is trained in an end-to-end manner, where the intra-slice and inter-slice features are fused and optimized jointly to take full advantage of 3D image information. RESULTS: Our method is evaluated on publicly available and clinical datasets and achieves competitive performance in these two datasets. CONCLUSIONS: These results indicate that the proposed method may be a useful tool for glioma segmentation.
Asunto(s)
Glioma , Glioma/diagnóstico por imagen , Humanos , Procesamiento de Imagen Asistido por Computador/métodos , Imagenología Tridimensional/métodos , Imagen por Resonancia Magnética/métodosRESUMEN
Macrovascular invasion (MaVI) is a major threat to survival in hepatocellular carcinoma (HCC), which should be treated as early as possible to ensure safety and efficacy. In this aspect, MaVI prediction can be helpful. However, MaVI prediction is difficult because of the inter-class similarity and intra-class variation of HCC in computed tomography (CT) images. Moreover, existing methods fail to include clinical priori knowledge associated with HCC, leading to incomprehensive information extraction. In this paper, we proposed a prior knowledge-aware fusion network (PKAFnet) to accurately achieve MaVI prediction in CT images. First, a perception module was presented to extract features related to tumor marginal heterogeneity in the graph domain, which contributed to rotation invariance and captured intensity variations of tumor margin. Second, a tumor segmentation network was built to obtain global information of a 3D tumor image and information associated with tumor internal heterogeneity in the image domain. Finally, multi-domain features associated with the tumor margin and tumor region were combined by using a multi-domain attentional feature fusion module. Thus, by incorporating MaVI-related prior knowledge, our PKAFnet can alleviate overfitting, which can improve the discriminative ability. The proposed PKAFnet was validated on a multi-center dataset, and remarkable performance was achieved in an independent testing set. Moreover, the interpretability of perception module and segmentation network were presented in our paper, which illustrated the effectiveness and credibility of PKAFnet. Therefore, the proposed method showed great application potential for MaVI prediction.
Asunto(s)
Carcinoma Hepatocelular , Neoplasias Hepáticas , Carcinoma Hepatocelular/diagnóstico por imagen , Carcinoma Hepatocelular/patología , Humanos , Procesamiento de Imagen Asistido por Computador/métodos , Imagenología Tridimensional , Neoplasias Hepáticas/diagnóstico por imagen , Procesos Neoplásicos , Tomografía Computarizada por Rayos X/métodosRESUMEN
RESEARCH QUESTION: Does the endometrial aspiration of ultrasound-invisible fluid immediately preceding embryo transfer affect IVF/vitrified-warmed embryo transfer outcomes? DESIGN: A prospective matched cohort study was conducted in 96 women and 96 control participants to assess the effect on pregnancy outcomes of endometrial aspiration performed immediately before embryo transfer. This study was carried out at a university-affiliated assisted reproductive medical centre between January 2019 and December 2019. Patients were divided into two groups. The EA group had cycles with endometrial aspiration of ultrasound-invisible fluid performed before embryo transfer and the non-EA group featured cycles without endometrial aspiration. The EA group was matched by propensity score with the non-EA group in a 1:1 ratio. The EA group consisted of 99 participants before and 96 participants after propensity score matching. There were 203 and 96 participants in the non-EA group before and after propensity score matching. RESULTS: No significant differences were detected in the baseline characteristics and cycle characteristics of the EA and non-EA groups. No significant between-group differences were found in reproductive outcomes in the overall population. Subgroup analysis of blastocyst transfer cycles showed the implantation rate was significantly higher in the EA group (61 women per group, 57.1% versus 40.8%, relative risk 1.40, 95% confidence interval 1.04-1.88; Pâ¯=â¯0.022). Live birth rate, clinical pregnancy rate, ongoing pregnancy rate and multiple pregnancy rate were not different among the groups. CONCLUSIONS: Endometrial aspiration immediately preceding embryo transfer does not affect IVF/vitrified-warmed embryo transfer outcomes. Interestingly, it might improve the vitrified-warmed blastocyst implantation rate. Randomized controlled trials are needed to confirm this result.
Asunto(s)
Transferencia de Embrión , Fertilización In Vitro , Estudios de Cohortes , Criopreservación , Femenino , Humanos , Masculino , Embarazo , Índice de Embarazo , Estudios Prospectivos , Estudios Retrospectivos , VitrificaciónRESUMEN
Puerarin regulates the osteoblast differentiation of umbilical cord mesenchymal stem cells. This study, hereby, explored the effects of puerarin on the osteogenic differentiation of dental follicle cells (DFCs) for the first time. Rat DFCs (rDFCs) were isolated and identified. After the rDFCs were treated by Puerarin and cultured in osteogenic induction medium, the viability, osteogenic differentiation, and the activities of alkaline phosphatase (ALP) and nitric oxide (NO) were detected. Besides, the secretion of cyclic guanosine monophosphate (cGMP) and expressions of collagen I, osteocalcin (OC), osteopontin (OPN), runt-related transcription factor 2 (RUNX2), soluble guanylate cyclase (SGC), and protein kinase G 1 (PKG-1) were further determined or quantified. Puerarin enhanced the viability and osteogenic differentiation, and increased the activities of ALP, NO, and cGMP and the expressions of Collagen I, OC, OPN, RUNX2, SGC, and PKG-1 in rDFCs. After the co-treatment with puerarin and L-NMMA (NO synthase inhibitor), the promotive effects of Puerarin on cell viability, osteogenic differentiation, and the expressions of collagen I, OC, OPN, RUNX2, SGC, and PKG-1 in rDFCs were reversed by L-NMMA. Puerarin boosted the osteogenic differentiation of rDFCs by activating the NO pathway.
Asunto(s)
Diferenciación Celular , Saco Dental/citología , Isoflavonas/farmacología , Óxido Nítrico/metabolismo , Osteogénesis , Fosfatasa Alcalina , Animales , Animales Recién Nacidos , Diferenciación Celular/efectos de los fármacos , Supervivencia Celular/efectos de los fármacos , Células Cultivadas , Colágeno Tipo I/metabolismo , Subunidad alfa 1 del Factor de Unión al Sitio Principal/metabolismo , GMP Cíclico/metabolismo , Proteínas Quinasas Dependientes de GMP Cíclico , Guanilato Ciclasa/metabolismo , Osteocalcina/metabolismo , Osteogénesis/efectos de los fármacos , Osteopontina/metabolismo , Ratas Sprague-Dawley , Solubilidad , omega-N-Metilarginina/farmacologíaRESUMEN
Single-atom catalysts (SACs) with atomically dispersed catalytic sites have shown outstanding catalytic performance in a variety of reactions. However, the development of facile and high-yield techniques for the fabrication of SACs remains challenging. In this paper, we report a laser-induced solid-phase strategy for the synthesis of Pt SACs on graphene support. Simply by rapid laser scanning/irradiation of a freeze-dried electrochemical graphene oxide (EGO) film loaded with chloroplatinic acid (H2PtCl6), we enabled simultaneous pyrolysis of H2PtCl6 into SACs and reduction/graphitization of EGO into graphene. The rapid freezing of EGO hydrogel film infused with H2PtCl6 solution in liquid nitrogen and the subsequent ice sublimation by freeze-drying were essential to achieve the atomically dispersed Pt. Nanosecond pulsed infrared (IR; 1064 nm) and picosecond pulsed ultraviolet (UV; 355 nm) lasers were used to investigate the effects of laser wavelength and pulse duration on the SACs formation mechanism. The atomically dispersed Pt on graphene support exhibited a small overpotential of -42.3 mV at -10 mA cm-2 for hydrogen evolution reaction and a mass activity tenfold higher than that of the commercial Pt/C catalyst. This method is simple, fast and potentially versatile, and scalable for the mass production of SACs.
RESUMEN
Despite the great potential of Serratia marcescens in industrial applications, lack of powerful genetic modification tools limits understanding of the regulatory networks of the useful metabolites and therefore restricts their mass production. To meet the urgent demand, we established a genome-editing strategy for S. marcescens based on Red recombineering in this study. Without host modification in advance, nucA and pigA were substituted by PCR-amplified resistance genes. No long homologous arms were required at the two sides of resistance genes. Using this procedure, the fragment at the S. marcescens as large as 20 kb was easily deleted. Then we constructed a counter-selection gene kil constructed under the control of inducible PBAD operon, which demonstrates obvious lethality to S. marcescens. Subsequently, GmR-kil double selection cassette was inserted into the CDS of pigA gene. Using single-stranded DNA-mediated recombination, this insertion mutation was efficiently repaired through kil counter-selection. A powerful genetic modification platform based on Red recombineering system was successfully established for S. marcescens. Multiple types of modification and multiple recombination strategies can all be performed easily in this species. We hope this study will be useful for the theoretical research and the research of metabolic engineering in S. marcescens.
Asunto(s)
Genoma Bacteriano , Recombinación Homóloga , Ingeniería Metabólica , Serratia marcescens/genéticaRESUMEN
Modulation of the grain boundary properties in thermoelectric materials that have thermally activated electrical conductivity is crucial in order to achieve high performance at low temperatures. In this work, we show directly that the modulation of the potential barrier at the grain boundaries in perovskite SrTiO3 changes the low-temperature dependency of the bulk material's electrical conductivity. By sintering samples in a reducing environment of increasing strength, we produced La0.08Sr0.9TiO3 (LSTO) ceramics that gradually change their electrical conductivity behavior from thermally activated to single-crystal-like, with only minor variations in the Seebeck coefficient. Imaging of the surface potential by Kelvin probe force microscopy found lower potential barriers at the grain boundaries in the LSTO samples that had been processed in the more reducing environments. A theoretical model using the band offset at the grain boundary to represent the potential barrier agreed well with the measured grain boundary potential dependency of conductivity. The present work showed an order of magnitude enhancement in electrical conductivity (from 85 to 1287 S cm-1) and power factor (from 143 to 1745 µW m-1 K-2) at 330 K by this modulation of charge transport at grain boundaries. This significant reduction in the impact of grain boundaries on charge transport in SrTiO3 provides an opportunity to achieve the ultimate "phonon glass electron crystal" by appropriate experimental design and processing.
RESUMEN
Daytime radiative cooling can spontaneously cool an object by reflecting sunlight and radiating heat in the form of infrared rays. Current daytime radiative cooling designs, including photonic structures and organic polymer-dielectric systems, are prone to age and fail under harsh conditions including high temperature, mechanical wear, and/or space irradiation. Here, an all-inorganic phosphoric acid-based geopolymer (PGEO) paint was developed and showed robust radiative cooling performance. This versatile suspension paint can be applied directly to diverse surfaces through scalable techniques such as spray coating and brushing. This inorganic coating possesses a high average hemispherical infrared emissivity >0.95 and reflects nearly 90% of solar irradiance. We attributed this excellent spectral selectivity of the PGEO coating to its unique inorganic geopolymer network (-Si-O-Al-O-P-O-), which settled the vibration intensity in a suitable range (0.2 < k < 1) and enabled multimode vibration. Moreover, this inorganic coating exhibits good comprehensive performance in terms of heat endurance, mechanical strength, and resistance to intense proton radiation, showing its promising applications in spacecraft, buildings, and communication base stations.
RESUMEN
Poor cycling stability and mechanistic controversies have hindered the wider application of rechargeable aqueous Zn-MnO2 batteries. Herein, direct evidence was provided of the importance of Mn2+ in this type of battery by using a bespoke cell. Without pre-addition of Mn2+ , the cell exhibited an abnormal discharge-charge profile, meaning it functioned as a primary battery. By adjusting the Mn2+ content in the electrolyte, the cell recovered its charging ability through electrodeposition of MnO2 . Additionally, a dynamic pH variation was observed during the discharge-charge process, with a precipitation of Zn4 (OH)6 (SO4 )â 5H2 O buffering the pH of the electrolyte. Contrary to the conventional Zn2+ intercalation mechanism, MnO2 was first converted into MnOOH, which reverted to MnO2 through disproportionation, resulting in the dissolution of Mn2+ . The charging process occurred by the electrodeposition of MnO2 , thus improving the reversibility through the availability of Mn2+ ions in the solution.
RESUMEN
BACKGROUND: Neoadjuvant radiotherapy is a commonly used method for the current standard-of-care for most patients with rectal cancer, when the effects of radioresistance are limited. The phosphatidylinositol transfer protein, cytoplasmic 1 (PITPNC1), a lipid-metabolism-related gene, has previously been proved to manifest pro-cancer effects in multiple types of cancer. However, whether PITPNC1 plays a role for developing radioresistance in rectal cancer patients is still unknown. Therefore, this study aims to investigate the role of PITPNC1 in rectal cancer radioresistance. METHODS: Patient-derived tissue were used to detect the difference in the expression level of PITPNC1 between radioresistant and radiosensitive patients. Bioinformatic analyses of high-throughput gene expression data were applied to uncover the correlations between PITPNC1 level and oxidative stress. Two rectal cancer cell lines, SW620, and HCT116, were selected in vitro to investigate the effect of PITPNC1 on radioresistance, reactive oxygen species (ROS) generation, apoptosis, and proliferation in rectal cancer. RESULTS: PITPNC1 is highly expressed in radioresistant patient-derived rectal cancer tissues compared to radiosensitive tissue; therefore, PITPNC1 inhibits the generation of ROS and improves the extent of radioresistance of rectal cancer cell lines and then inhibits apoptosis. Knocking down PITPNC1 facilitates the production of ROS while application of the ROS scavenger, N-acetyl-L-cysteine (NAC), could reverse this effect. CONCLUSIONS: PITPNC1 fuels radioresistance of rectal cancer via the inhibition of ROS generation.
RESUMEN
Electrodeposition of conducting polymer-carbon composites from an electrolyte precursor solution is a facile one-step approach to fabricate device-ready electrodes for energy storage. A key challenge in this approach is the dispersion of the carbon nanomaterials with the aqueous precursor solution with previous approaches either heavily oxidizing the carbon nanomaterials or using high concentrations of anionic surfactants as dopants. However, the former reduces the electrical conductivity of carbon, while the latter reduces the ionic mobility of the conducting polymer due to the large anion size. Herein, for the first time we present a quaternary electrolyte formulation for the fabrication of pristine carbon and polypyrrole (PPy) composites that does not sacrifice either electron or ion mobility. The electrolyte uses lithium perchlorate (20 mM) as a supporting electrolyte and dopant, sodium dodecylbenzenesulfonate at a very low concentration (1.43 mM) as a surfactant, together with pristine carbon nanomaterials and pyrrole monomers. The order of magnitude difference between the concentration of the dopant and surfactant ion allows the as-deposited PPy to be doped predominantly by small-sized and mobile perchlorate anions. Composites of PPy with carbon black, carbon nanotubes, and electrochemical exfoliated graphene (EEG) have been successfully prepared using this new quaternary electrolyte. The as-fabricated PPy/EEG composite electrodes showed a specific capacitance of 348.8 F g-1 with a high rate capability (190.7 F g-1 at 71 A g-1). Supercapacitor devices based on the PPy/EEG composite electrodes exhibit a high rate behavior up to 500 mV s-1 and a long cycle life of 5000 cycles.
RESUMEN
Lithium-ion capacitors possess excellent power and energy densities, and they can combine both of those advantages from supercapacitors and lithium-ion batteries, leading to novel generation hybrid devices for storing energy. This study synthesized one three-dimensional (3D) hierarchical structure, self-assembled from CoS nanosheets, according to a simple and efficient manner, and can be used as an anode for lithium ion capacitors. This CoS anode, based on a conversion-type Li+ storage mechanism dominated by diffusion control, showed a large reversible capacity, together with excellent stability for cycling. The CoS shows a discharge capacity ≈434 mA h/g at 0.1 A/g. The hybrid lithium-ion capacitor, which had the CoS anode as well as the biochar cathode, exhibits excellent electrochemical performance with ultrahigh energy and power densities of 125.2 Wh/kg and 6400 W/kg, respectively, and an extended cycling life of 81.75% retention after 40â¯000 cycles. The CoS with self-assembled 3D hierarchical structure in combination with a carbon cathode offers a versatile device for future applications in energy storage.
RESUMEN
PURPOSE: To classify radiation necrosis versus recurrence in glioma patients using a radiomics model based on combinational features and multimodality MRI images. METHODS: Fifty-one glioma patients who underwent radiation treatments after surgery were enrolled in this study. Sixteen patients revealed radiation necrosis while 35 patients showed tumor recurrence during the follow-up period. After treatment, all patients underwent T1-weighted, T1-weighted postcontrast, T2-weighted, and fluid-attenuated inversion recovery scans. A total of 41,284 handcrafted and 24,576 deep features were extracted for each patient. The 0.623 + bootstrap method and the area under the curve (denoted as 0.632 + bootstrap AUC) metric were used to select the features. The stepwise forward method was applied to construct 10 logistic regression models based on different combinations of image features. RESULTS: For handcrafted features on multimodality MRI, model 7 with seven features yielded the highest AUC of 0.9624, sensitivity of 0.8497, and specificity of 0.9083 in the validation set. These values were higher than the accuracy of using handcrafted features on single-modality MRI (paired t-test, p < 0.05, except sensitivity). For combined handcrafted and AlexNet features on multimodality MRI, model 6 with six features achieved the highest AUC of 0.9982, sensitivity of 0.9941, and specificity of 0.9755 in the validation set. These values were higher than the accuracy of using handcrafted features on multimodality MRI (paired t-test, p < 0.05). CONCLUSIONS: Handcrafted and deep features extracted from multimodality MRI images reflecting the heterogeneity of gliomas can provide useful information for glioma necrosis/recurrence classification.
Asunto(s)
Neoplasias Encefálicas/diagnóstico por imagen , Neoplasias Encefálicas/radioterapia , Glioma/diagnóstico por imagen , Glioma/radioterapia , Recurrencia Local de Neoplasia/diagnóstico por imagen , Traumatismos por Radiación/diagnóstico por imagen , Adolescente , Adulto , Anciano , Encéfalo/patología , Neoplasias Encefálicas/patología , Niño , Biología Computacional , Diagnóstico Diferencial , Femenino , Glioma/patología , Humanos , Interpretación de Imagen Asistida por Computador/métodos , Imagen por Resonancia Magnética/métodos , Masculino , Persona de Mediana Edad , Imagen Multimodal/métodos , Análisis Multivariante , Necrosis , Traumatismos por Radiación/patología , Adulto JovenRESUMEN
Conductive inks for the future printed electronics should have the following merits: high conductivity, flexibility, low cost, and compatibility with wide range of substrates. However, the state-of-the-art conductive inks based on metal nanoparticles are high in cost and poor in flexibility. Herein, we reported a highly conductive, low cost, and super flexible ink based on graphene nanoplatelets. The graphene ink has been screen-printed on plastic and paper substrates. Combined with postprinting treatments including thermal annealing and compression rolling, the printed graphene pattern shows a high conductivity of 8.81 × 104 S m-1 and good flexibility without significant conductivity loss after 1000 bending cycles. We further demonstrate that the printed highly conductive graphene patterns can act as current collectors for supercapacitors. The supercapacitor with the printed graphene pattern as the current collector and printed activated carbon as the active material shows a good rate capability of up to 200 mV s-1. This work potentially provides a promising route toward the large-scale fabrication of low cost yet flexible printed electronic devices.