Antifouling and Chemical-Resistant Nanofiltration Membrane Modulated by a Functionalized MWCNT Interlayer for Efficient Dye/Salt Separation at High Salinity.

Dye/salt separation in textile wastewater is of great importance. Membrane filtration technology is an environmentally friendly and effective approach to solve this issue. In this study, a thin-film composite membrane with a tannic acid (TA)-modified carboxylic multiwalled carbon nanotube (MWCNT) interlayer (M-TA) was prepared by interfacial polymerization with amino-functionalized graphene quantum dots (NGQDs) acting as aqueous monomers. The addition of the M-TA interlayer favored the formation of a thinner, more hydrophilic, and smoother selective skin layer for the composite membrane. The pure water permeability of the M-TA-NGQDs membrane was ∼9.32 L m-2 h-1 bar-1, which was higher than that of the NGQDs membrane without the interlayer. Meanwhile, the M-TA-NGQDs membrane presented better methyl orange (MO) rejection (97.79%) than the NGQDs membrane (87.51%). The optimal M-TA-NGQDs membrane exhibited excellent dye rejection (Congo red (CR): 99.61%; brilliant green (BG): 96.04%) and low salt rejection (NaCl < 15%). Noticeably, the M-TA-NGQDs membrane displayed effective selective separation performance (CR and BG > 99%) for dye/NaCl mixed solutions even at a high NaCl concentration of 50,000 mg/L. Furthermore, the M-TA-NGQDs membrane presented high water permeability recovery ratio values (91.02-98.20%). Importantly, the M-TA-NGQDs membrane showed excellent chemical stability (acid/alkali resistance). Generally, the fabricated M-TA-NGQDs membrane exhibited a great prospect for applications in dye wastewater treatment and water recycling, especially for the effective selective separation of dye/salt mixtures for high-salinity textile dyeing wastewater.

Low-pressure thin-film composite nanofiltration membranes with enhanced selectivity and antifouling property for effective dye/salt separation.

For better sustainable resource recovery and elevating the separation efficiency of dye/salt mixture, it is essential to develop an appropriate nanofiltration membrane for the treatment of textile dyeing wastewater containing relatively smaller molecule dyes. In this work, a novel composite polyamide-polyester nanofiltration membrane was fabricated by tailoring amino functionalized quantum dots (NGQDs) and ß-cyclodextrin (CD). An in-situ interfacial polymerization occurred between the synthesized NGQDs-CD and trimesoyl chloride (TMC) on the modified multi-carbon nanotubes (MWCNTs) substrate. The incorporation of NGQDs significantly elevated the rejection (increased by âˆ¼ 45.08%) of the resultant membrane for small molecular dye (Methyl orange, MO) compared to the pristine CD membrane at low pressure (1.5 bar). The newly developed NGQDs-CD-MWCNTs membrane exhibited enhanced water permeability without compromising the dye rejection compared to the pure NGQDs membrane. The improved performance of the membrane was primarily attributed to the synergistic effect of functionalized NGQDs and the special hollow-bowl structure of CD. The optimal NGQDs-CD-MWCNTs-5 membrane expressed pure water permeability of 12.35 L m-2h-1 bar-1 at the pressure of 1.5 bar. Noteworthily, the NGQDs-CD-MWCNTs-5 membrane not only showed high rejection for the larger molecular dye of Congo Red (CR, 99.50%) but also for the smaller molecular dye of MO (96.01%) and Brilliant Green (BG, 95.60%) with the permeability of 8.81, 11.40, and 6.37 L m-2h-1 bar-1, respectively at low pressure (1.5 bar). The rejection of inorganic salts by the NGQDs-CD-MWCNTs-5 membrane was 17.20% for sodium chloride (NaCl), 14.30% for magnesium chloride (MgCl2), 24.63% for magnesium sulfate (MgSO4), and 54.58% for sodium sulfate (Na2SO4), respectively. The great rejection of dyes remained in the dye/salt binary mixed system (higher than 99% for BG and CR, <21% for NaCl). Importantly, the NGQDs-CD-MWCNTs-5 membrane exhibited favorable antifouling performance and potential good operation stability performance. Consequently, the fabricated NGQDs-CD-MWCNTs-5 membrane suggested a prospective application for the reuse of salts and water in textile wastewater treatment owing to the effective selective separation performance.

Loosely Sandwich-Structured Membranes Decorated with UiO-66-NH2 for Efficient Antibiotic Separation and Organic Solvent Resistance.

Thin-film nanocomposite (TFN) membranes with efficient molecular separation and organic solvent resistance are active in demand in wastewater treatment and resource reclamation, meeting the goal of emission peaks and carbon neutrality. In this work, a simple and rational design strategy has been employed to construct a sandwich-structured membrane for removing fluoroquinolone antibiotics and recycling organic solvents. The sandwich-structured membrane is composed of a porous substrate, a hydrophilic tannic acid-polyethyleneimine (TA-PEI) interlayer, and a polyamide (PA) selective layer decorated with metal-organic framework (PA-MOF). Results manifest that the hydrophilic TA-PEI interlayer played a bridging and gutter effect to achieve effective control in amide storage, amine diffusion, and nanomaterial downward leakage at the immiscible interface. The PA-MOF selective layer has been changed to a loosely crumpled surface, endowing functionalities on the sandwich-structured membrane that included limited pores, strengthened electronegativity, and stronger hydrophilicity. Thus, an enhanced water flux of 87.23 ± 7.43 LMH was achieved by the TFN-2 membrane (0.04 mg·mL-1 UiO-66-NH2), which is more than five times that of the thin-film composite membrane (17.46 ± 3.88 LMH). The rejection against norfloxacin, ciprofloxacin, and levofloxacin is 92.94 ± 1.60%, 94.62 ± 1.29%, and 96.92 ± 1.05%, respectively, effectively breaking through the "trade-off" effect between membrane permeability and rejection efficiency. Further antifouling results showed that the sandwich-structured membrane had lower flux decay ratios (3.36∼7.07%) and higher flux recovery ratios (93.40∼98.40%), as well as superior long-term stability after 30 days of filtration. Moreover, organic solvent resistance testing confirms that the sandwich-structured membrane maintained stable solvent flux and better recovery rates in ethanol, acetone, isopropanol, and N,N-dimethylformamide. Detailed nanofiltration mechanism studies revealed that these outstanding performances are based on the joint effect of the TA-PEI interlayer and PA-MOF selective layer, proposing a new perspective to break through the bottleneck of nanofiltration application in a complex environment.

The combined toxicity and mechanism of multi-walled carbon nanotubes and nano zinc oxide toward the cabbage.

The natural environment is a complex system, and there is never only one kind of nanomaterial entering the environment. However, many studies only considered the plant toxicity of one kind of nanomaterial and do not consider the influence of two or more kinds of nanomaterials on plant toxicity. Multi-walled carbon nanotubes (MWCNTs) and zinc oxide nanoparticles (ZnO NPs) are two common and widely used nanomaterials in water environment, so these two kinds of nanomaterials were chosen to explore the effects of their combined toxicity on cabbage. This study investigated the toxicity of MWCNTs combined with ZnO NPs on cabbage by measuring the length of roots and stems, chlorophyll content, oxidative stress, antioxidant enzyme activity, metal element content, and root scanning electron microscopy. The toxicity of single MWCNTs toward cabbage was attributed to direct oxidative damage, while the toxicity of single ZnO NPs toward cabbage was due to the high level of zinc concentration. Moreover, ZnO NPs (10 mg/L) ameliorated MWCNTs toxicity toward cabbage by improving the activity of antioxidant enzymes. ZnO NPs (50 and 100 mg/L) because of the high content of zinc disrupted the balance of other metals in the plant and increased the toxicity of MWCNTs. In conclusion, the combined toxicity of different concentrations and types of nanomaterials should be considered for a more accurate assessment of environmental risks.

The performance of UiO-66-NH2/graphene oxide (GO) composite membrane for removal of differently charged mixed dyes.

The dye wastewater treatment by membrane separation technology has obtained extensive attention in recent years. Nevertheless, it was rare for research on the removal of differently charged mixed dyes. In this study, several UiO-66-NH2 composite membranes were prepared and optimization experiments were conducted. The performance of composite membranes were evaluated by the removal of cationic (Methylene blue, MB), neutral (Rhodamine B, RB), and anionic (Congo red, CR) dyes. The optimization results demonstrated that the UiO-66-NH2/graphene oxide (UNG) composite membrane (PUF/PDA/UNG) which was loaded on polyurethane foam modified with polydopamine (PUF/PDA) had the best properties. In filtration experiments, the solution pH exhibited greater effect on the removal efficiency of MB and CR than RB. When NaCl, KCl, CaCl2 and Na2SO4 coexisted in the dye solution, the removal efficiency of MB by PUF/PDA/UNG membrane were 96.62%, 98.17%, 86.39% and 99.34% respectively. The presence of humic acid showed slight inhibitory effect on the removal of MB by PUF/PDA/UNG membrane (71.93%). The experimental results for mixed dyes filtration showed that PUF/PDA/UNG membrane could effectively remove MB, RB and CR in binary (i.e., MB/RB and RB/CR) and ternary (i.e., MB/RB/CR) systems through secondary filtration. And PUF/PDA/UNG membrane could remove MB and CR simultaneously through one-time filtration in MB/CR binary system. The removal mechanism was mainly attributed to the aggregation of mixed dyes, electrostatic interaction between dye molecules and the membrane surface, and hydrogen bonding. All results suggested that the as-prepared PUF/PDA/UNG membrane have great potential in practical treatment of dye wastewater.

Zirconium-based metal organic frameworks loaded on polyurethane foam membrane for simultaneous removal of dyes with different charges.

Treating dye wastewater by membrane filtration technology has received much attention from researchers all over the world, however, current studies mainly focused on the removal of singly charged dyes but actual wastewater usually contains dyes with different charges. In this study, the removal of neutral, cationic and anionic dyes in binary or ternary systems was conducted by using zirconium-based metal organic frameworks loaded on polyurethane foam (Zr-MOFs-PUF) membrane. The Zr-MOFs-PUF membrane was fabricated by an in-situ hydrothermal synthesis approach and a hot-pressing process. Neutrally charged Rhodamine B (RB), positively charged Methylene blue (MB), and negatively charged Congo red (CR) were chosen as model pollutants for investigating filtration performance of the membrane. The results of filtration experiments showed that the Zr-MOFs-PUF membrane could simultaneously remove RB, MB, and CR not only from their binary system including RB/MB, RB/CR, and MB/CR mixtures, but also from RB/MB/CR ternary system. The removal of dyes by Zr-MOFs-PUF membrane was mainly attributed to the electrostatic interactions, hydrogen bond interaction, and Lewis acid-base interactions between the membrane and dye molecules. The maximum removal efficiencies by Zr-MOFs-PUF membrane were 98.80% for RB at pH ≈ 7, 97.57% for MB at pH ≈ 9, and 87.39% for CR at pH ≈ 3. Additionally, when the NaCl concentration reached 0.5 mol/L in single dye solutions, the removal efficiencies of RB, MB, and CR by Zr-MOFs-PUF membrane were 93.08%, 79.52%, and 97.82%, respectively. All the results suggested that the as-prepared Zr-MOFs-PUF membrane has great potential in practical treatment of dye wastewater.

The bioenergetics mechanisms and applications of sulfate-reducing bacteria in remediation of pollutants in drainage: A review.

Sulfate-reducing bacteria (SRB), a group of anaerobic prokaryotes, can use sulfur species as a terminal electron acceptor for the oxidation of organic compounds. They not only have significant ecological functions, but also play an important role in bioremediation of contaminated sites. Although numerous studies on metabolism and applications of SRB have been conducted, they still remain incompletely understood and even controversial. Fully understanding the metabolism of SRB paves the way for allowing the microorganisms to provide more beneficial services in bioremediation. Here we review progress in bioenergetics mechanisms and application of SRB including: (1) electron acceptors and donors for SRB; (2) pathway for sulfate reduction; (3) electron transfer in sulfate reduction; (4) application of SRB for economical and concomitant treatment of heavy metal, organic contaminants and sulfates. Moreover, current knowledge gaps and further research needs are identified.

Phosphorescence detection of manganese(VII) based on Mn-doped ZnS quantum dots.

The phosphorescent l-cysteine modified manganese-doped zinc sulfide quantum dots (l-cys-MnZnS QDs) was developed for a highly sensitive detection of permanganate anions (MnO4-). l-cys-MnZnS QDs, which were easily synthesized in aqueous media using safe and low-cost materials, can emit intense phosphorescence even though the solution was not deoxygenated. However, the phosphorescence of l-cys-Mn-ZnS QDs was strongly quenched by MnO4- ascribed to the oxidation of l-cys and the increase of surface defects on l-cys-MnZnS QDs. Under the optimal conditions, l-cys-MnZnS QDs offer high selectivity over other anions for MnO4- determination, and good linear Stern-Volmer equation was obtained for MnO4- in the range of 0.5-100µM with a detection limit down to 0.24µM. The developed method was finally applied to the detection of MnO4- in water samples, and the spike-recoveries fell in the range of 95-106%.