Selective inhibition of TGFß1 activation overcomes primary resistance to checkpoint blockade therapy by altering tumor immune landscape.

Despite breakthroughs achieved with cancer checkpoint blockade therapy (CBT), many patients do not respond to anti-programmed cell death-1 (PD-1) due to primary or acquired resistance. Human tumor profiling and preclinical studies in tumor models have recently uncovered transforming growth factor-ß (TGFß) signaling activity as a potential point of intervention to overcome primary resistance to CBT. However, the development of therapies targeting TGFß signaling has been hindered by dose-limiting cardiotoxicities, possibly due to nonselective inhibition of multiple TGFß isoforms. Analysis of mRNA expression data from The Cancer Genome Atlas revealed that TGFΒ1 is the most prevalent TGFß isoform expressed in many types of human tumors, suggesting that TGFß1 may be a key contributor to primary CBT resistance. To test whether selective TGFß1 inhibition is sufficient to overcome CBT resistance, we generated a high-affinity, fully human antibody, SRK-181, that selectively binds to latent TGFß1 and inhibits its activation. Coadministration of SRK-181-mIgG1 and an anti-PD-1 antibody in mice harboring syngeneic tumors refractory to anti-PD-1 treatment induced profound antitumor responses and survival benefit. Specific targeting of TGFß1 was also effective in tumors expressing more than one TGFß isoform. Combined SRK-181-mIgG1 and anti-PD-1 treatment resulted in increased intratumoral CD8+ T cells and decreased immunosuppressive myeloid cells. No cardiac valvulopathy was observed in a 4-week rat toxicology study with SRK-181, suggesting that selectively blocking TGFß1 activation may avoid dose-limiting toxicities previously observed with pan-TGFß inhibitors. These results establish a rationale for exploring selective TGFß1 inhibition to overcome primary resistance to CBT.

Structural basis of specific inhibition of extracellular activation of pro- or latent myostatin by the monoclonal antibody SRK-015.

Myostatin (or growth/differentiation factor 8 (GDF8)) is a member of the transforming growth factor ß superfamily of growth factors and negatively regulates skeletal muscle growth. Its dysregulation is implicated in muscle wasting diseases. SRK-015 is a clinical-stage mAb that prevents extracellular proteolytic activation of pro- and latent myostatin. Here we used integrated structural and biochemical approaches to elucidate the molecular mechanism of antibody-mediated neutralization of pro-myostatin activation. The crystal structure of pro-myostatin in complex with 29H4-16 Fab, a high-affinity variant of SRK-015, at 2.79 Å resolution revealed that the antibody binds to a conformational epitope in the arm region of the prodomain distant from the proteolytic cleavage sites. This epitope is highly sequence-divergent, having only limited similarity to other closely related members of the transforming growth factor ß superfamily. Hydrogen/deuterium exchange MS experiments indicated that antibody binding induces conformational changes in pro- and latent myostatin that span the arm region, the loops contiguous to the protease cleavage sites, and the latency-associated structural elements. Moreover, negative-stain EM with full-length antibodies disclosed a stable, ring-like antigen-antibody structure in which the two Fab arms of a single antibody occupy the two arm regions of the prodomain in the pro- and latent myostatin homodimers, suggesting a 1:1 (antibody:myostatin homodimer) binding stoichiometry. These results suggest that SRK-015 binding stabilizes the latent conformation and limits the accessibility of protease cleavage sites within the prodomain. These findings shed light on approaches that specifically block the extracellular activation of growth factors by targeting their precursor forms.

Assessing the Impact of Charge Variants on Stability and Viscosity of a High Concentration Antibody Formulation.

Characterizing molecular charge variants or isoforms is essential for understanding safety, potency, and bioavailability of antibody therapeutics. However, there is little information on how they influence stability and viscosity-properties governing immunogenicity and delivery. To bridge this gap, we studied antibody stability as a function of charge variant content generated via bioreactor process. We were able to systematically vary acidic variant levels as a function of bioreactor harvest time. Importantly, we do not observe any impact on aggregation behavior of a formulated antibody at high protein concentration as a function of acidic variant level. Furthermore, we confirm that acidic variants enriched using fractionation do not influence viscosity, colloidal or conformational stability. Interestingly, variants with the most acidic isoelectric points contribute disproportionately to formulation color. We discuss our findings in context of antibody manufacturing processes that may yield increased charge variant content.

Determining the affinity and stoichiometry of interactions between unmodified proteins in solution using Biacore.

We describe a general Biacore method for measuring equilibrium binding affinities and stoichiometries for interactions between unmodified proteins and their unmodified ligands free in solution. Mixtures of protein and ligand are preequilibrated at different ratios in solution and then analyzed by Biacore using a sensor chip surface that detects only unbound analyte. Performing the Biacore analysis under mass transport limited conditions allows the concentration of unbound analyte to be determined from the initial velocity of binding. Plots of initial velocity versus the concentration of the varied binding partner are fitted to a quadratic binding equation to give the affinity and stoichiometry of binding. We demonstrate the method using soluble Her2 extracellular domain binding to monovalent, bivalent, and trivalent forms of an anti-Her2 antibody. The affinity we measured agrees with that obtained from conventional Biacore kinetic analysis, and the stoichiometries for the resulting 1:1, 1:2, and 1:3 complexes were confirmed by gel filtration with in-line light scattering. The method is applicable over an affinity range of approximately 100 pM to 1 µM and is particularly useful when there is concern that covalently modifying one or the other binding partner might affect its binding properties or where multivalency might otherwise complicate a quantitative analysis of binding.

Secretion from bacterial versus mammalian cells yields a recombinant scFv with variable folding properties.

Escherichia coli (E. coli) is the most commonly used organism for expressing antibody fragments such as single chain antibody Fvs (scFvs). Previously, we have utilized E. coli to express well-folded scFvs for characterization and engineering purposes with the goal of using these engineered proteins as building blocks for generating IgG-like bispecific antibodies (BsAbs). In the study, described here, we observed a significant difference in the secondary structure of an scFv produced in E. coli and the same scFv expressed and secreted from chinese hamster ovary (CHO) cells as part of a BsAb. We devised a proteolytic procedure to separate the CHO-derived scFv from its antibody-fusion partner and compared its properties with those of the E. coli-derived scFv. In comparison to the CHO-derived scFv, the E. coli-derived scFv was found trapped in a misfolded, but monomeric state that was stable for months at 4 °C. The misfolded state bound antigen in a heterogeneous fashion that included non-specific binding, which made functional characterization challenging. This odd incidence of obtaining a misfolded scFv from bacteria suggests careful characterization of the folded properties of bacterially expressed scFvs is warranted if anomalous issues with antigen-binding or non-specificity occur during an engineering campaign. Additionally, our proteolytic methodology for obtaining significant levels of intact scFvs from highly expressed IgG-like antibody proteins serves as a robust method for producing scFvs in CHO without the use of designed cleavage motifs.

Improving the solubility of anti-LINGO-1 monoclonal antibody Li33 by isotype switching and targeted mutagenesis.

Monoclonal antibodies (Mabs) are a favorite drug platform of the biopharmaceutical industry. Currently, over 20 Mabs have been approved and several hundred others are in clinical trials. The anti-LINGO-1 Mab Li33 was selected from a large panel of antibodies by Fab phage display technology based on its extraordinary biological activity in promoting oligodendrocyte differentiation and myelination in vitro and in animal models of remyelination. However, the Li33 Fab had poor solubility when converted into a full antibody in an immunoglobulin G1 framework. A detailed analysis of the biochemical and structural features of the antibody revealed several possible reasons for its propensity to aggregate. Here, we successfully applied three molecular approaches (isotype switching, targeted mutagenesis of complementarity determining region residues, and glycosylation site insertion mutagenesis) to address the solubility problem. Through these efforts we were able to improve the solubility of the Li33 Mab from 0.3 mg/mL to >50 mg/mL and reduce aggregation to an acceptable level. These strategies can be readily applied to other proteins with solubility issues.

Active site remodelling accompanies thioester bond formation in the SUMO E1.

E1 enzymes activate ubiquitin (Ub) and ubiquitin-like (Ubl) proteins in two steps by carboxy-terminal adenylation and thioester bond formation to a conserved catalytic cysteine in the E1 Cys domain. The structural basis for these intermediates remains unknown. Here we report crystal structures for human SUMO E1 in complex with SUMO adenylate and tetrahedral intermediate analogues at 2.45 and 2.6 A, respectively. These structures show that side chain contacts to ATP.Mg are released after adenylation to facilitate a 130 degree rotation of the Cys domain during thioester bond formation that is accompanied by remodelling of key structural elements including the helix that contains the E1 catalytic cysteine, the crossover and re-entry loops, and refolding of two helices that are required for adenylation. These changes displace side chains required for adenylation with side chains required for thioester bond formation. Mutational and biochemical analyses indicate these mechanisms are conserved in other E1s.

Designed semisynthetic protein inhibitors of Ub/Ubl E1 activating enzymes.

Semisynthetic, mechanism-based protein inhibitors of ubiquitin (Ub) and ubiquitin-like modifier (Ubl) activating enzymes (E1s) have been developed to target E1-catalyzed adenylation and thioesterification of the Ub/Ubl C-terminus during the processes of protein SUMOylation and ubiquitination. The inhibitors were generated by intein-mediated expressed protein ligation using a truncated Ub/Ubl protein (SUMO residues 1-94; Ub residues 1-71) with a C-terminal thioester and synthetic tripeptides having a C-terminal adenosine analogue and an N-terminal cysteine residue. SUMO-AMSN (4a) and Ub-AMSN (4b) contain a sulfamide group as a nonhydrolyzable mimic of the phosphate group in the cognate Ub/Ubl-AMP adenylate intermediate in the first half-reaction, and these constructs selectively inhibit SUMO E1 and Ub E1, respectively, in a dose-dependent manner. SUMO-AVSN (5a) and Ub-AVSN (5b) contain an electrophilic vinyl sulfonamide designed to trap the incoming E1 cysteine nucleophile (Uba2 Cys173 in SUMO E1; Uba1 Cys593 in Ub E1) in the second half-reaction, and these constructs selectively, covalently, and stably cross-link to SUMO E1 and Ub E1, respectively, in a cysteine nucleophile-dependent manner. These inhibitors are powerful tools to probe outstanding mechanistic questions in E1 function and can also be used to study the biological functions of E1 enzymes.

A molecular basis for phosphorylation-dependent SUMO conjugation by the E2 UBC9.

Phosphorylation and small ubiquitin-like modifier (SUMO) conjugation contribute to the spatial and temporal regulation of substrates containing phosphorylation-dependent SUMO consensus motifs (PDSMs). Myocyte-enhancement factor 2 (MEF2) is a transcription factor and PDSM substrate whose modification by SUMO drives postsynaptic dendritic differentiation. NMR analysis revealed that the human SUMO E2 interacted with model substrates for phosphorylated and nonphosphorylated MEF2 in similar extended conformations. Mutational and biochemical analysis identified a basic E2 surface that enhanced SUMO conjugation to phosphorylated PDSM substrates MEF2 and heat-shock transcription factor 1 (HSF1), but not to nonphosphorylated MEF2 or HSF1, nor the non-PDSM substrate p53. Mutant ubiquitin-conjugating enzyme UBC9 isoforms defective in promoting SUMO conjugation to phosphorylated MEF2 in vitro and in vivo also impair postsynaptic differentiation in organotypic cerebellar slices. These data support an E2-dependent mechanism that underlies phosphorylation-dependent SUMO conjugation in pathways that range from the heat-shock response to nuclear hormone signaling to brain development.

Taking it step by step: mechanistic insights from structural studies of ubiquitin/ubiquitin-like protein modification pathways.

Ubiquitin (Ub) and ubiquitin-like (Ubl) proteins regulate a diverse array of cellular pathways through post-translational attachment to protein substrates. Ub/Ubl-mediated signaling is initiated through E1, E2, and E3-mediated conjugation, transduced by proteins that recognize Ub/Ubl-modified substrates, and terminated by proteases which remove the Ub/Ubl from the substrate. Recent structural studies have elucidated mechanisms pertinent to Ub/Ubl conjugation, recognition, and deconjugation, highlighting essential steps during Ub/Ubl modification that illustrate common and divergent mechanistic themes within this important process.

The structurally disordered KRAB repression domain is incorporated into a protease resistant core upon binding to KAP-1-RBCC domain.

The KRAB domain is a 75 amino acid transcriptional repression module that is encoded by more than 400 zinc finger protein genes, making it the most abundant repression domain in the human proteome. KRAB-mediated gene silencing requires a direct high affinity interaction with the RBCC domain of KAP-1 co-repressor. The structures of the free KRAB domain or the KRAB-RBCC complex are unknown. To address this, we have performed a systematic biophysical analysis of all KRAB isoforms using purified recombinant proteins. All KRAB domains are predominantly monomeric either alone or in a complex with KAP-1-RBCC protein, while a KRAB-SCAN isoform exists as a stable dimer. The KRAB:KAP-1-RBCC interaction requires only the A box in the context of the KRAB(Ab) or KRAB(AC) but both A and B boxes in the context of KRAB(AB). All isoforms bind the KAP-1-RBCC in a stable, zinc dependent fashion with a stoichiometry of KRAB1:3 RBCC with a zinc content of four atoms per RBCC monomer. Limited proteolysis, mass spectrometry and N-terminal sequence analyses suggest that a core complex comprises the entire RBCC domain of KAP-1 and the AB box of the KRAB domain rendering it resistant to proteolysis. NMR spectroscopy showed that unbound KRAB domain does not exist as a well-folded globular protein in solution but may fold into an ordered structure upon binding to the KAP-1-RBCC protein. This is the first example of a structurally disordered repressor domain that is the most widely conserved silencing domain in tetrapods.

Structure and analysis of a complex between SUMO and Ubc9 illustrates features of a conserved E2-Ubl interaction.

The SUMO E2 Ubc9 serves as a lynchpin in the SUMO conjugation pathway, interacting with the SUMO E1 during activation, with thioester linked SUMO after E1 transfer and with the substrate and SUMO E3 ligases during conjugation. Here, we describe the structure determination of a non-covalent complex between human Ubc9 and SUMO-1 at 2.4 A resolution. Non-covalent interactions between Ubc9 and SUMO are conserved in human and yeast insomuch as human Ubc9 interacts with each of the human SUMO isoforms, and yeast Ubc9 interacts with Smt3, the yeast SUMO ortholog. Structural comparisons reveal similarities to several other non-covalent complexes in the ubiquitin pathway, suggesting that the non-covalent Ubc9-SUMO interface may be important for poly-SUMO chain formation, for E2 recruitment to SUMO conjugated substrates, or for mediating E2 interactions with either E1 or E3 ligases. Biochemical analysis suggests that this surface is less important for E1 activation or di-SUMO-2 formation, but more important for E3 interactions and for poly-SUMO chain formation when the chain exceeds more than two SUMO proteins.

Structure of the C-terminal RING finger from a RING-IBR-RING/TRIAD motif reveals a novel zinc-binding domain distinct from a RING.

The really interesting new gene (RING) family of proteins contains over 400 members with diverse physiological functions. A subset of these domains is found in the context of the RING-IBR-RING/TRIAD motifs which function as E3 ubiquitin ligases. Our sequence analysis of the C-terminal RING (RING2) from this motif show that several metal ligating and hydrophobic residues critical for the formation of a classical RING cross-brace structure are not present. Thus, we determined the structure of the RING2 from the RING-IBR-RING motif of HHARI and showed that RING2 has a completely distinct topology from classical RINGs. Notably, RING2 binds only one zinc atom per monomer rather than two and uses a different hydrophobic network to that of classical RINGs. Additionally, this RING2 topology is novel, bearing slight resemblance to zinc-ribbon motifs around the zinc site and is different from the topologies of the zinc binding sites found in RING and PHDs. We demonstrate that RING2 acts as an E3 ligase in vitro and using mutational analysis deduce the structural features required for this activity. Further, mutations in the RING-IBR-RING of Parkin cause a rare form of Parkinsonism and these studies provide an explanation for those mutations that occur in its RING2. From a comparison of the RING2 structure with those reported for RINGs, we infer sequence determinants that allow discrimination between RING2 and RING domains at the sequence analysis level.

Gamma interferon and cadmium treatments modulate eukaryotic initiation factor 4E-dependent mRNA transport of cyclin D1 in a PML-dependent manner.

The eukaryotic initiation factor 4E (eIF4E), when dysregulated, transforms cells. A substantial fraction of eIF4E forms nuclear bodies that colocalize with those associated with the promyelocytic leukemia protein PML. Overexpression studies indicate that nuclear eIF4E promotes the transport of cyclin D1 mRNA from the nucleus to the cytoplasm and that PML is a key negative regulator of this function. Since previous studies used overexpression methods, the physiological relevance of eIF4E mRNA transport function or its interaction with PML remained unknown. Therefore, we monitored whether eIF4E-dependent transport could be modulated in response to environmental conditions. Here we report that cadmium treatment, which disperses PML nuclear bodies, leaves eIF4E bodies intact, leading to increased transport of cyclin D1 mRNA and increased cyclin D1 protein levels. Removal of cadmium allows PML to reassociate with eIF4E nuclear bodies, leading to decreased cyclin D1 transport and reduced cyclin D1 protein levels. In contrast, we show that treating cells with interferon increased the levels of PML protein at the PML-eIF4E nuclear body, leading to nuclear retention of cyclin D1 transcripts and reduced cyclin D1 protein levels. Neither interferon nor cadmium treatment altered cyclin D1 levels in PML(-/-) cells. Consistently, overexpression of a series of PML and eIF4E mutant proteins established that PML eIF4E interaction is required for the observed effects of cadmium and interferon treatment. The present study provides the first evidence that physiological factors modulate the mRNA transport functions of eIF4E and that this regulation is PML dependent.