RESUMEN
PbSO4 is a key component in the charging and discharging of lead acid batteries-such as the cycling of automotive batteries. PbSO4 is a poor conductor that forms on the positive and negative electrodes during discharging and dissolves during charging of a lead acid battery. Over time, buildup of PbSO4 occurs on the electrodes, ultimately reducing the efficiency of the battery. This study aims to determine the nucleation and growth mechanisms of PbSO4 nanoparticles in various solutions to potentially reduce or control the buildup of PbSO4 on battery electrodes over time. The time dependency of particle morphology was observed using various reaction conditions. PbSO4 particles were created using premixed solutions at various times of reaction. H2O, acetone, methanol, ethanol, and isopropanol were used to stop the reaction and development of the PbSO4 particles. The structure of the nanoparticles was characterized via transmission electron microscopy, high-angle annular dark field scanning transmission electron microscopy, and selected area electron diffraction. This study provides insight into the mechanism by which PbSO4 nanoparticles form in various solutions and reveals that the degree of complexity of the solution plays a large role in the nucleation and growth of the PbSO4 nanoparticles. This insight can provide avenues to reduce unwanted buildup of PbSO4 on battery electrodes over time, which can extend battery life and performance.
RESUMEN
Various ecological and economical concerns have spurred mankind's quest for materials that can provide enhanced weight savings and improved fuel efficiency. As part of this pursuit, we have microstructurally tailored an exceptionally high-strength titanium alloy, Ti-6Al-2Sn-4Zr-6Mo (Ti6246) through friction stir processing (FSP). FSP has altered the as-received bimodal microstructure into a unique modulated microstructure comprised of fine acicular αâ³-laths with nano precipitates within the laths. The sequence of phase transformations responsible for the modulated microstructure and consequently for the strength is discussed with the help of scanning electron microscopy, transmission electron microscopy, and synchrotron X-ray diffraction studies. The specific strength attained in one of the conditions is close to 450 MPa m3/mg, which is about 22% to 85% greater than any commercially available metallic material. Therefore, our novel nano particle strengthened Ti alloy is a potential replacement for many structural alloys, enabling significant weight reduction opportunities.
