RESUMEN
This work was based on the study of an intra-articular delivery system constituted by a poloxamer gel vehiculating clodronate in chitosan nanoparticles. This system has been conceived to obtain a specific and controlled release of clodronate in the joints to reduce the arthritis rheumatoid degenerative effect. Clodronate (CLO) is a first-generation bisphosphonate with anti-inflammatory properties, inhibiting the cytokine and NO secretion from macrophages, therefore causing apoptosis in these cells. This is related to its ability to be metabolized by cells and converted into a cytotoxic intermediate as a non-hydrolysable analogue of ATP. Chitosan (CHI) was used to develop nanosystems, by ionotropic gelation induced by clodronate itself. A fractional factorial experimental design allowed us to obtain nanoparticles, the diameter of which ranged from 200 to 300nm. Glutaraldehyde was used to increase nanoparticle stability and modify the drug release profile. The zeta potential value of crosslinked nanopaparticles was 21.0mV±1.3, while drug loading was 31.0%±5.4 w/w; nanoparticle yield was 18.2%±1.8 w/w, the encapsulation efficiency was 48.8%±9.9 w/w. Nanoparticles were homogenously loaded in a poloxamer sol, and the drug delivery system is produced in-situ after local administration, when sol become gel at physiological temperature. The properties of poloxamer gels containing CHI-CLO nanoparticles, such as viscosity, gelation temperature and drug release properties, were evaluated. In vitro studies were conducted to evaluate the effects of these nanoparticles on a human monocytic cell line (THP1). The results showed that this drug delivery system is more efficient, with respect to the free drug, to counteract the inflammatory process characteristic of several degenerative diseases.
Asunto(s)
Conservadores de la Densidad Ósea/química , Ácido Clodrónico/química , Colágeno/química , Sistemas de Liberación de Medicamentos , Durapatita/química , Nanopartículas/química , Conservadores de la Densidad Ósea/farmacología , Línea Celular , Supervivencia Celular/efectos de los fármacos , Ácido Clodrónico/farmacología , Colágeno/farmacología , Reactivos de Enlaces Cruzados/química , Composición de Medicamentos/métodos , Liberación de Fármacos , Durapatita/farmacología , Análisis Factorial , Expresión Génica , Glutaral/química , Humanos , Interleucina-1beta/genética , Interleucina-1beta/inmunología , Interleucina-8/genética , Interleucina-8/inmunología , Monocitos/citología , Monocitos/efectos de los fármacos , Monocitos/metabolismo , Nanopartículas/ultraestructura , Tamaño de la Partícula , Transición de Fase , Poloxámero/química , ViscosidadRESUMEN
A new nanoparticulate system for foscarnet delivery was prepared and evaluated. Nanoparticles were obtained by ionotropic gelation of chitosan induced by foscarnet itself, acting as an ionotropic agent in a manner similar to tripolyphosphate anion. A Doehlert design allowed finding the suitable experimental conditions. Nanoparticles were between 200 and 300nm in diameter (around 450nm after redispersion). Nanoparticle size increased after 5h, but no size increase was observed after 48h when nanoparticles were crosslinked with glutaraldehyde. Zeta potential values of noncrosslinked and crosslinked nanoparticles were between 20 and 25mV, while drug loading of noncrosslinked nanoparticles was about 40% w/w (55% w/w for crosslinked nanoparticles). Nanoparticle yield was around 25% w/w. Crosslinked nanoparticles showed a controlled drug release. Foscarnet released from nanoparticles maintained the antiviral activity of the free drug when tested in vitro against lung fibroblasts (HELF) cells infected with HCMV strain AD-169. Moreover, nanoparticles showed no toxicity on non-infected HELF cells. These nanoparticles may represent a delivery system that could improve the therapeutic effect of foscarnet.
Asunto(s)
Antivirales/farmacología , Quitosano/síntesis química , Quitosano/farmacología , Foscarnet/síntesis química , Foscarnet/farmacología , Nanopartículas/química , Antivirales/química , Quitosano/química , Citomegalovirus/efectos de los fármacos , Estabilidad de Medicamentos , Endocitosis/efectos de los fármacos , Fibroblastos/efectos de los fármacos , Fibroblastos/virología , Fluorescencia , Foscarnet/química , Glutaral/química , Proteínas Fluorescentes Verdes/metabolismo , Humanos , Pulmón/embriologíaRESUMEN
A solubility phase study was carried out to investigate the ability of Poloxamer 407 (P407) to solubilise tolfenamic acid. P407 considerably enhanced the solubility of this anti-inflammatory agent, by increasing its concentration in aqueous solution at least 2000-fold (up to C=4mM), when present at 12% (w/w) at 25 degrees C. The solubilisation process was spontaneous and exothermic, as indicated by thermodynamic parameters. A mixture experimental design was used to investigate the physical and release properties of P407-based gel formulations. The experimental design allowed verifying that drug release, occurring through a Fickian diffusion mechanism, was independent of the bulk viscosity of the system. The sustained release of tolfenamic acid towards the receptor phase constituted by isopropyl myristate was accompanied, in its early stage, by the concomitant release of ethanol and tetrahydrofurfuryl alcohol (THFA) used as cosolvents to obtain a drug loading of 0.6% (w/w). The poloxamer micellar phase was directly involved in the late stage of drug release, thus indicating that a strong interaction occurred in the gel between the poloxamer and tolfenamic acid. Results point out the possibility of both the systemic and topical administration of tolfenamic acid by means of aqueous solutions or gels containing P407 at an adequate concentration.
Asunto(s)
Antiinflamatorios no Esteroideos/administración & dosificación , Antiinflamatorios no Esteroideos/química , Poloxámero/química , Tensoactivos/química , ortoaminobenzoatos/administración & dosificación , ortoaminobenzoatos/química , Algoritmos , Química Farmacéutica , Cromatografía Líquida de Alta Presión , Geles , Modelos Lineales , Espectroscopía de Resonancia Magnética , Espectrometría de Masas , Miristatos/química , Análisis de Regresión , Solubilidad , Solventes , Espectrofotometría Ultravioleta , Estereoisomerismo , Termodinámica , ViscosidadRESUMEN
In this work, nanoparticles with a negative or positive surface charge were prepared through electrostatic interaction of an anionic cisplatin-alginate complex with a cationic polyelectrolyte, namely chitosan or N-trimethyl chitosan (substitution degree of 85%). Statistical experimental design allowed the study of the influence of component amounts on the characteristics of nanoparticles. Mean particle diameter ranged from 180 nm to 350 nm. After 24 h, while the cisplatin-alginate complex released almost all the drug in saline-buffered solution at pH 7.4, approximately 40% w/w of total cisplatin was released from negative nanoparticles and roughly 50% w/w from positive ones. The same cumulative amounts of released drug were found after 48 h, with a progressive reduction to lower values up to 6 days. Drug loading of nanoparticles with a positive zeta potential (43 mV-60 mV) ranged from 13% w/w to 21% w/w and particle yield, referred to total polymers, was about 15% w/w (50% w/w if referred to cisplatin-alginate complex). Nanoparticles with a negative zeta potential (-34 mV) were obtained with a yield of 40% w/w and a drug loading of 18% w/w. These nanoparticles were the least active on all cell lines tested, while the cytotoxic activity of the positive nanoparticles was similar to or lower than that of cisplatin, probably depending on the combination of sizes and zeta potential values, on P388 murine and A2780 human cells. On A549 human cells, the nanoparticles with the smallest size and the lowest positive zeta potential were more active than cisplatin and showed a similar capability in inducing apoptosis in A2780 human cells. These results indicate that cisplatin complexes with polycarboxylate polymers can be transformed into cisplatin particulate carriers of high potential interest.
Asunto(s)
Alginatos/química , Antineoplásicos/química , Quitosano/química , Cisplatino/química , Nanopartículas/química , Alginatos/farmacología , Animales , Antineoplásicos/análisis , Antineoplásicos/farmacología , Apoptosis/efectos de los fármacos , Tampones (Química) , Línea Celular Tumoral , Cisplatino/análisis , Cisplatino/farmacología , Relación Dosis-Respuesta a Droga , Femenino , Ácido Glucurónico/química , Ácido Glucurónico/farmacología , Ácidos Hexurónicos/química , Ácidos Hexurónicos/farmacología , Humanos , Concentración de Iones de Hidrógeno , Leucemia/patología , Neoplasias Pulmonares/patología , Ratones , Nanopartículas/ultraestructura , Neoplasias Ováricas/patología , Tamaño de la Partícula , Electricidad EstáticaRESUMEN
The aim of this work was to prepare and evaluate a matrix for buccal drug delivery composed of a chitosan salt and poloxamer 407. Different chitosan salts were formed by reacting chitosan with acetic, citric, and lactic acid. Various proportions of poloxamer 407 were added to the aqueous solution of chitosan salt, and the residue obtained by lyophilisation was compressed into discs, using a 30 kN compression force. An experimental design (3(2)) was used to study the influence of the type of chitosan salt and of the relative amount of poloxamer on drug release capacity, swelling, erosion, and mucoadhesiveness of matrices. The results showed that matrix properties depended significantly on both relative amount of poloxamer and chitosan salt type. The rank orders of chitosan salts for the four processes evaluated were as follows: drug release: chitosan acetate>chitosan citrate>chitosan lactate; swelling: chitosan lactate>chitosan acetate=chitosan citrate; erosion: chitosan citrate>chitosan lactate>chitosan acetate; mucoadhesion: chitosan lactate>chitosan acetate=chitosan citrate. Mucoadhesion was particularly favoured when poloxamer 407 was present at about 30% (w/w). The matrix composed of chitosan lactate and poloxamer 407 showed the best characteristics for buccal administration.
Asunto(s)
Quitosano/farmacocinética , Sistemas de Liberación de Medicamentos/métodos , Mucosa Bucal/metabolismo , Poloxámero/farmacocinética , Administración Bucal , Animales , Quitosano/administración & dosificación , Quitosano/síntesis química , Evaluación Preclínica de Medicamentos/métodos , Técnicas In Vitro , Mucosa Bucal/efectos de los fármacos , Poloxámero/administración & dosificación , Poloxámero/síntesis química , PorcinosRESUMEN
Retinoic acid (RA) is employed in the therapeutic treatment of acute promyelocytic leukemia (APL). In this paper, the chemical stability and the most favorable storage conditions of RA in hard gelatin capsules containing alpha-lactose monohydrate, used in clinical experimentation, are reported. A secondary goal of this work was to show the usefulness of a robust regression technique, repeated median with replicates (RMWR) in a solid-state shelf life prediction by accelerated studies. The capsules were stored at room temperature and in the freezer. Their residual RA content was assayed for more than 3 years. RA chemical degradation was monitored by high-performance liquid chromatography (HPLC) and thin-layer chromatography (TLC) stability-indicating methods previously validated and able to detect various potential degradation products. Possible physical modifications were checked by dissolution tests and differential scanning calorimetry (DSC) of the content of the capsules. The shelf life was also predicted by an accelerated isothermal method to confirm room temperature results, and the activation energy estimated through this study was 12.5 +/- 1.1 kcal/mol (95% confidence interval). In the conditions of climatic zone II, the shelf life for the capsules stored at room temperature in light-resistant containers was equal to 678 days, while the capsules stored in the freezer retained the initial content of drug after 1289 days. From the results gathered in this study, the usefulness of RMWR for shelf life prediction in the presence of outliers is evident.
Asunto(s)
Gelatina/química , Tretinoina/química , Rastreo Diferencial de Calorimetría , Cápsulas , Cromatografía Líquida de Alta Presión , Estabilidad de Medicamentos , Almacenaje de Medicamentos , Congelación , Dureza , Cinética , Lactosa/química , Análisis de los Mínimos Cuadrados , Solubilidad , Termodinámica , Tretinoina/administración & dosificaciónRESUMEN
The interaction between dithranol and heptakis(2,3,6-tri-O-methyl)-beta-cyclodextrin (TMBCyD) has been investigated in aqueous solution containing isoascorbic acid (0.2% w/v) as antioxidant and in the solid state. The interaction in the solid state was studied by differential scanning calorimetry (DSC), infrared spectroscopy (IR), X-ray powder diffractometry (XPD) and a dissolution-rate method. The extent of complexation between the two substances was poor, as indicated by the low value of the slope of the linear part of the solubility curve. A phase diagram was constructed by measuring the thermal behaviour of various re-solidified physical mixtures of dithranol and of TMBCyD previously subjected to heating until melting of the TMBCyD. The loss of dithranol, owing to sublimation and degradation caused by the thermal treatment used, was less than 10%. In keeping with XPD and IR data, the phase diagram indicated that a complex was formed containing 13.7% dithranol (molar ratio 1:1) which had a congruent melting point at 164 degrees C. The drug dissolution rate from the 1:1 complex was measurable, unlike that of the corresponding physical mixture, and was significantly increased when the complex was dispersed in the glassy matrix of TMBCyD, as it was in re-solidified mixtures containing 2-7% dithranol. The results show that the solubility of dithranol is increased significantly as a consequence of its interaction with TMBCyD, despite the low extent of complexation between the two substances.
Asunto(s)
Antralina/química , Antiinflamatorios/química , Antioxidantes/química , Ácido Ascórbico/química , Ciclodextrinas/química , beta-Ciclodextrinas , Administración Tópica , Rastreo Diferencial de Calorimetría , Microscopía de Polarización , Solubilidad , Soluciones , Espectrofotometría Infrarroja , Difracción de Rayos XRESUMEN
The classical isothermal approach for the prediction of drug stability exploits least squares regression. In this paper the use of some robust regression techniques to estimate the rate constants at different temperatures has been evaluated. These techniques are able to give accurate estimates when data are contaminated by the presence of outliers. The successful application of two robust methods, single median and repeated median, to real stability data from the literature is shown. Moreover, the authors have modified the original methods in order to apply them to data sets with replicates, typical of stability studies. The performances of the modified techniques have been investigated with simulated data sets containing outliers and with real data. They appear suitable for preliminary stability studies, especially on solid dosage forms. For a quick implementation of these methods, macroprograms written for a widely used spreadsheet are reported.
Asunto(s)
Simulación por Computador , Estabilidad de Medicamentos , Análisis de RegresiónRESUMEN
The synthesis and the spectroscopic characterization of a new potential drug for urinary incontinence, adosupine, is described. Adosupine and its potential synthesis impurities were analyzed by a new HPLC method that was developed with a C18 reversed-phase column. The analysis was made under isocratic conditions, with a mobile phase of acetonitrile:water (15:85, v/v). Resolution of all synthesis impurities was allowed. The method was also applied to stability studies of adosupine in solid state and in solution under different conditions. With the conditions used, only one degradation product was shown by HPLC analysis; it was isolated, characterized, and identified as the hydrolysis product of the lactam ring present in the adosupine structure.
Asunto(s)
Dibenzazepinas/química , Incontinencia Urinaria/tratamiento farmacológico , Cromatografía Líquida de Alta Presión , Cristalografía por Rayos X , Dibenzazepinas/análisis , Dibenzazepinas/síntesis química , Estabilidad de Medicamentos , Hidrólisis , Espectroscopía de Resonancia Magnética , Espectrometría de Masas , Conformación MolecularRESUMEN
A method for the detection and quantitation of several undeclared drugs in herbal preparations with slimming activity is proposed. Samples containing various anorexics, hypoglycemics and antidepressants were prepared by addition of the drugs to a synthetic mixture containing the most commonly used plant powders for those preparations. Each sample was subjected to a treatment that permitted, after a simple ethanolic extraction, the identification of the drugs by TLC using three different solvent systems. A further purification of the ethanolic solution through a polyamide column allowed for quantitative analysis of the drugs by a RP-HPLC method. The analytical recovery was good (88-97%); the calibration curves were linear over a wide range of drug concentrations (30-500 micrograms/ml) (r > 0.9995); the precision was high (CV% = 0.4-2.8) as well as the accuracy (96-102%).
Asunto(s)
Depresores del Apetito/análisis , Drogas Ilícitas/análisis , Plantas Medicinales/química , Cromatografía Líquida de Alta Presión , Cromatografía en Capa Delgada , Polvos , Espectrofotometría UltravioletaRESUMEN
Ronactolol [(+/-)-4'-[2-hydroxy-3-(isopropylamino)propoxy]-p-anisanilide], a new aminopropanol derivative showing beta-adrenoreceptor blocking activity, was administered orally as capsules to healthy humans at three single doses (30, 60, and 120 mg). Two HPLC methods were developed separately for determination of drug levels in urine and plasma. For plasma samples, after addition of internal standard (IS), a single-step extraction of alkalinized plasma was performed with methylene chloride. The organic layer was evaporated to dryness under reduced pressure, and the residue was taken up and chromatographed on a microbore silica column. Ronactolol and IS were detected by a UV detector at a wavelength of 278 nm. Excellent linearity was observed between the peak height ratios (ronactolol:IS) and concentrations in plasma. The lowest limit of detection (signal:noise, 3:1) was 1.5 ng/mL of plasma. Urine samples were directly injected and chromatographed on a microbore C18 column with an ion-pairing mobile phase. Excellent linearity was observed between the peak areas and concentrations in urine. The lowest limit of detection (signal:noise, 3:1) was 75 ng/mL of urine. The assay was used to determine the main pharmacokinetic parameters in healthy humans.