Microfluidic 3D hepatic cultures integrated with a droplet-based bioanalysis unit.

A common challenge in microfluidic cell cultures has to do with analysis of cell function without replacing a significant fraction of the culture volume and disturbing local concentration gradients of signals. To address this challenge, we developed a microfluidic cell culture device with an integrated bioanalysis unit to enable on-chip analysis of picoliter volumes of cell-conditioned media. The culture module consisted of an array of 140 microwells with a diameter of 300 m which were made low-binding to promote organization of cells into 3D spheroids. The bioanalysis module contained a droplet generator unit, 15 micromechanical valves and reservoirs loaded with reagents. Each 0.8 nL droplet contained an aliquot of conditioned media mixed with assay reagents. The use of microvalves allowed us to load enzymatic assay and immunoassay into sequentially generated droplets for detection of glucose and albumin, respectively. As a biological application of the microfluidic device, we evaluated hormonal stimulation and glucose consumption of hepatic spheroids. To mimic physiological processes occurring during feeding and fasting, hepatic spheroids were exposed to pancreatic hormones, insulin or glucagon. The droplet-based bioanalysis module was used to measure uptake or release of glucose upon hormonal stimulation. In the future, we intend to use this microfluidic device to mimic and measure pathophysiological processes associated with hepatic insulin resistance and diabetes in the context of metabolic syndrome.

Millifluidic valves and pumps made of tape and plastic.

There is growing interest in producing micro- and milli-fluidic technologies made of thermoplastic with integrated fluidic control elements that are easy to assemble and suitable for mass production. Here, we developed millifluidic valves and pumps made of acrylic layers bonded with double-sided tape that are simple and fast to assemble. We demonstrate that a layer of pressure-sensitive adhesive (PSA) is flexible enough to be deformed at relatively low pressures. A chemical treatment deposited on specific regions of the PSA prevents it from sticking to the thermoplastic, which enabled us to create three different types of valves in normally open or closed configurations. We characterized different aspects of their performance, their operating pressures, the cut-off pressure values to open or close the valves (for different configurations and sizes), and the flow rate and volume pumped by seven different micropumps. As an application, we implemented a glucose assay with integrated pumps and valves, automatically generating glucose dilutions and reagent mixing. The ability to create polymeric microfluidic control units made with tape paves the way for their mass manufacturing.

On-Chip Analysis of Protein Secretion from Single Cells Using Microbead Biosensors.

The profiling of the effector functions of single immune cells─including cytokine secretion─can lead to a deeper understanding of how the immune system operates and to potential diagnostics and therapeutical applications. Here, we report a microfluidic device that pairs single cells and antibody-functionalized microbeads in hydrodynamic traps to quantitate cytokine secretion. The device contains 1008 microchambers, each with a volume of ∼500 pL, divided into six different sections individually addressed to deliver an equal number of chemical stimuli. Integrating microvalves allowed us to isolate cell/bead pairs, preventing cross-contamination with factors secreted by adjacent cells. We implemented a fluorescence sandwich immunoassay on the biosensing microbeads with a limit of detection of 9 pg/mL and were able to detect interleukin-8 (IL-8) secreted by single blood-derived human monocytes in response to different concentrations of LPS. Finally, our platform allowed us to observe a significant decrease in the number of IL-8-secreting monocytes when paracrine signaling becomes disrupted. Overall, our platform could have a variety of applications for which the analysis of cellular function heterogeneity is necessary, such as cancer research, antibody discovery, or rare cell screening.

Microfluidic systems for the analysis of blood-derived molecular biomarkers.

Biomarkers are relevant indicators of the physiological state of an individual. Although biomarkers can be found in diseased tissue and different biofluids, sampling from blood plasma is relatively easy and less invasive. Among the molecular biomarkers that can be found circulating in plasma are proteins, metabolites, nucleic acids, and exosomes. Some of these plasma-circulating biomarkers are now employed for patient stratification in a broad range of diseases with high sensitivity and specificity and are useful in early diagnosis, initial risk assessment, and therapy selection. However, there is a pressing need to develop novel approaches for biomarker analysis that can be translated into clinical or other settings without complex methodologies or instrumentation. Microfluidics has been touted as a promising technology to carry out this task because it offers high-throughput, automation, multiplexed detection, and portability, possibly overcoming the bottleneck that prevent the translation of novel biomarkers to the point-of-care (POC). Here, we provide a review of the microfluidic systems that have been engineered to detect circulating molecular biomarkers in blood plasma. We also review the different microfluidic approaches for plasma enrichment, which are now being integrated with microfluidic-based biomarker analyzers. Such integration should lead to cost-effective solutions in in vitro diagnostics, with special relevance to POC platforms.

A high-throughput multiplexed microfluidic device for COVID-19 serology assays.

The applications of serology tests to the virus SARS-CoV-2 are diverse, ranging from diagnosing COVID-19, understanding the humoral response to this disease, and estimating its prevalence in a population, to modeling the course of the pandemic. COVID-19 serology assays will significantly benefit from sensitive and reliable technologies that can process dozens of samples in parallel, thus reducing costs and time; however, they will also benefit from biosensors that can assess antibody reactivities to multiple SARS-CoV-2 antigens. Here, we report a high-throughput microfluidic device that can assess antibody reactivities against four SARS-CoV-2 antigens from up to 50 serum samples in parallel. This semi-automatic platform measures IgG and IgM levels against four SARS-CoV-2 proteins: the spike protein (S), the S1 subunit (S1), the receptor-binding domain (RBD), and the nucleocapsid (N). After assay optimization, we evaluated sera from infected individuals with COVID-19 and a cohort of archival samples from 2018. The assay achieved a sensitivity of 95% and a specificity of 91%. Nonetheless, both parameters increased to 100% when evaluating sera from individuals in the third week after symptom onset. To further assess our platform's utility, we monitored the antibody titers from 5 COVID-19 patients over a time course of several weeks. Our platform can aid in global efforts to control and understand COVID-19.

Birefringent optofluidic gratings.

A set of parallel microfluidic channels behaving as a diffraction grating operating in the Raman-Nath regime has been fabricated and studied. The diffraction efficiency of such structure can be tuned by selecting a liquid with a particular refractive index and/or optical anisotropy. Alternatively the optical properties of the liquid can be characterised by measuring the diffraction efficiency and the state of polarization of the diffracted beam. In this work, the microfluidic channels under study have been filled with penicillin molecules dissolved in water. Due to the chirality of the penicillin, the liquid has been found to have circular birefringence of 2.14 × 10-7. The addition of the anisotropic liquid modifies the polarization properties of the microfluidic diffraction grating. The diffraction efficiency of the grating has been characterised for different probe beam wavelengths and states of polarization. Currently the diffraction efficiency of the device is low - 1.7%, but different approaches for its improvement have been discussed.

Automated Droplet-Based Microfluidic Platform for Multiplexed Analysis of Biochemical Markers in Small Volumes.

The ability to detect multiple analytes in a small sample volume has significance for numerous areas of research, including organs-on-chip, small animal experiments, and neonatology. The objective of this study was to develop an automated microfluidics platform for multiplexed detection of analytes in microliter sample volumes. This platform employed computer-controlled microvalves to create laminar co-flows of sample and assay reagent solutions. It also contained valve-regulated cross-junction for discretizing sample/reagent mixtures into water-in-oil droplets. Microfluidic automation allowed us to control parameters related to frequency of droplet generation and the number of droplets of the same composition, as well as the size of droplets. Each droplet represented an individual enzymatic assay carried out in a sub-nanoliter (0.8 nL) volume reactor. An enzymatic reaction involving target analyte and assay reagents produced colorimetric or fluorescent signals in droplets. Importantly, intensity of optical signal was proportional to the concentration of analyte in question. This microfluidic bioanalysis platform was used in conjunction with commercial "mix-detect" assays for glucose, total bile acids, and lactate dehydrogenase (LDH). After characterizing these assays individually, we demonstrated sensitive multiplexed detection of three analytes from as little as 3 µL. In fact, this volume was sufficient to generate multiple repeat droplets for each of the three biochemical assays as well as positive control droplets, confirming the quality of assay reagents and negative control droplets to help with background subtraction. One potential application for this microfluidic bioanalysis platform involves sampling cell-conditioned media in organ-on-chip devices. To highlight this application, hepatocyte spheroids were established in microfluidic devices, injured on-chip by exposure to lipotoxic agent (palmitate), and then connected to the bioanalysis module for daily monitoring of changes in cytotoxicity (LDH), energy metabolism (glucose), and liver function (total bile acids). Microfluidic in-droplet assays revealed increased levels of LDH as well as reduction in bile acid synthesis-results that were consistent with hepatic injury. Importantly, these experiments highlighted the fact that in-droplet assays were sufficiently sensitive to detect changes in functional output of a relatively small (∼100) number of hepatocyte spheroids cultured in a microfluidic device. Moving forward, we foresee increasing the multiplexing capability of this technology and applying this platform to other biological/medical scenarios where detection of multiple analytes from a small sample volume is desired.

Massive Parallel Analysis of Single Cells in an Integrated Microfluidic Platform.

New tools that facilitate the study of cell-to-cell variability could help uncover novel cellular regulation mechanisms. We present an integrated microfluidic platform to analyze a large number of single cells in parallel. To isolate and analyze thousands of individual cells in multiplexed conditions, our platform incorporates arrays of microwells (7 pL each) in a multilayered microfluidic device. The device allows the simultaneous loading of cells into 16 separate chambers, each containing 4640 microwells, for a total of 74 240 wells per device. We characterized different parameters important for the operation of the microfluidic device including flow rate, solution exchange rate in a microchamber, shear stress, and time to fill up a single microwell with molecules of different molecular weight. In general, after ∼7.5 min of cell loading our device has an 80% microwell occupancy with 1-4 cells, of which 36% of wells contained a single cell. To test the functionality of our device, we carried out a cell viability assay with adherent and nonadherent cells. We also studied the production of neutrophil extracellular traps (NETs) from single neutrophils isolated from peripheral blood, observing the existence of temporal heterogeneity in NETs production, perhaps having implications in the type of the neutrophil response to an infection or inflammation. We foresee our platform will have a variety of applications in drug discovery and cellular biology by facilitating the characterization of phenotypic differences in a monoclonal cell population.