RESUMEN
Organic-inorganic hybrid perovskites have attracted significant attention for optoelectronic applications due to their efficient photoconversion properties. However, grain boundaries and irregular crystal orientations in polycrystalline films remain issues. This study presents a method for producing crystalline-orientation-controlled perovskite single-crystal films using retarded solvent evaporation. It is shown that single-crystal films, grown via inverse temperature crystallization within a confined space, exhibit enhanced optoelectronic property. Using interfacial polymer layer, this method produces high-quality perovskite single-crystalline films with varying crystal orientations. Density functional theory calculations confirm favorable adsorption energies for (110) surfaces with methylammonium iodide and PbI2 terminations on poly(3-hexylthiophene), and stronger adsorption for (224) surfaces with I and methylammonium terminations on polystyrene, influenced by repulsive forces between the thiophene group and the perovskite surface. The correlation between charge transport characteristics and perovskite single-crystalline properties highlights potential advancements in perovskite optoelectronics, improving device performance and reliability.
RESUMEN
Multi-functional nanoparticles are useful for various applications, such as biomedical imaging, detection, and display technologies. Colour-tunable GdEuxTb1-xO3 nanoparticles were synthesized with emission colour ranging from green (545 nm) to red (616 nm) by varying x (x = 0, 0.1, 0.3, 0.5, 0.7, 0.9, and 1). These nanoparticles were surface-grafted with polyacrylic acid and a small quantity of 2,6-pyridinedicarboxylic acid. This modification aimed to ensure long-term colloidal stability (>1 year without precipitation) and high quantum yields (>30%) in aqueous media. Additionally, they exhibited long emission lifetimes (â¼1 ms), high longitudinal water proton spin relaxivities (>30 s-1mM-1), and high X-ray attenuation efficiencies (â¼10 HU mM-1). These multiple exceptional properties within a single nanoparticle make them highly valuable for applications in biomedical imaging, noise-free signal detection, and colour display.
RESUMEN
Increasing multidrug-resistant pathogenic microbial around the world become a global problem, making it imperative to develop effective methods for bacterial inactivation in wastewater. In this study, we propose a multifunctional photoelectrochemical (PEC) system to successfully disinfect microbial cells and degrade orange (II) dyes. CoOx NP were synthesized by spin-coating onto hydrothermally synthesized TiO2 nanorod arrays followed by electrodeposited NiFe-LDH to develop the NiFe-LDH/CoOx NP-TiO2 NRs. Interestingly, spin-coated CoOx NP-TiO2 NRs exhibited a 1.5-fold enhancement in photocurrent (1.384 mA/cm2) than pristine TiO2 NRs (0.92 mA/cm2). A NiFe-layered double hydroxide (LDH) cocatalysts layer further exhibits the maximum photocurrent density of 1.64 mA/cm2 with IPCE of 84.5% at 1.0 VAg/AgCl at 380 nm. Furthermore, NiFe-LDH/CoOx-TiO2 NR photoanodes were effectually employed for photoelectrochemical bacteria disinfection and organic pollutant removals. With NiFe-LDH/CoOx-TiO2 NR, 99% (120 min) bacterial inactivation and 99% (60 min) orange II dye decomposition efficiency was achieved. Superoxide radicals (-O2â¢), hydroxyl radicals (HOâ¢), and holes (h+) played a critical role in the PEC degradation systems. Due to the synergy between NiFe-LDH cocatalyst and CoOx interlayer, surface water oxidation reactions were accelerated over NiFe-LDH/CoOx NP-TiO2 NRs. The charge transport process in NiFe-LDH/CoOx NP-TiO2 NRs photoanode-based PEC system was proposed in detail.
Asunto(s)
Electrodos , Titanio , Aguas Residuales , Titanio/química , Aguas Residuales/química , Catálisis , Técnicas Electroquímicas/métodos , Contaminantes Químicos del Agua/química , Hidróxidos/química , Eliminación de Residuos Líquidos/métodos , Procesos Fotoquímicos , Nanotubos/química , Colorantes/química , Compuestos Azo/química , Purificación del Agua/métodos , Desinfección/métodosRESUMEN
Herein, we successfully synthesized Hf/Zr co-doping on Fe2O3 nanorod photocatalyst by a hydrothermal process and quenching methods. The synergistic roles of Hf and Zr double-doping on the bacteria inactivation test and decomposition of organic pollutants were investigated in detail for the 1 wt% CoOx loaded Hf/Zr-Fe2O3 NRs and CuOx/CoOx loaded Hf/Zr-Fe2O3 NRs photocatalyst. Initially, the rod-like porous morphology of the Hf/Zr-doped Fe2O3 NRs was produced via a hydrothermal method at various Hf co-doping (0, 2, 4, 7 and 10)%. Further, CoOx and CuOx loaded by a wet impregnation approach on the Hf/Zr-Fe2O3 NRs and a highly photoactive Hf(4)/Zr-Fe2O3 [CoOx/CuOx] NRs photocatalyst were developed. After the Hf(4)/Zr-Fe2O3 [CoOx/CuOx] NRs photocatalyst treatment, the Bio-TEM imagery of bacterial cells showed extensive morphological deviations in cell membranes. Hf(4)/Zr-Fe2O3 NR achieved 84.1% orange II degradation upon 3 h illumination, which is higher than that of Hf-Fe2O3 and Zr-Fe2O3 (68.7 and 73.5%, respectively). Additionally, the optimum sample, Hf(4)/Zr-Fe2O3 [CoOx/CuOx] photocatalyst, exhibited 95.5% orange II dye degradation after light radiation for 3 h. Optimized Hf(4)/Zr-Fe2O3 [CoOx/CuOx] catalysts exhibited 99.9% and 99.7% inactivation of E. coli and S. aureus with 120 min, respectively. Further, scavenger experiments revealed that the electrons are the primary responsible species for photocatalytic kinetics. This work will provide a rapid method for the development of high photocatalytic performance materials for bacterial disinfection and organic degradation.
Asunto(s)
Antibacterianos , Cobre , Compuestos Férricos , Nanotubos , Circonio , Circonio/química , Antibacterianos/química , Antibacterianos/farmacología , Catálisis , Nanotubos/química , Compuestos Férricos/química , Cobre/química , Cobre/farmacología , Hafnio/química , Óxidos/química , Cobalto/química , Procesos FotoquímicosRESUMEN
In this study, two novel multiple resonance (MR) emitters, DtCzBN and Cy-DtCzBN, were designed based on the well-known BCzBN structure and synthesized for narrowband solution-processed organic light-emitting diodes (OLEDs). Cy-DtCzBN possesses a dimeric V-shaped structure formed by coupling two individual DtCzBN units via a nonconjugated cyclohexane linker. When compared with DtCzBN, Cy-DtCzBN, as a medium-sized molecule, was found to maintain the optical and photophysical properties of the corresponding monomeric unit, DtCzBN, but exhibits high thermal stability, excellent solubility, and good film-forming ability. Additionally, solution-processed OLEDs were fabricated by using two sets of molecules: one set of small molecular hosts and emitters (i.e., mCP and DtCzBN) and the other set of medium-sized molecular hosts and emitters (i.e., Cy-mCP and Cy-DtCzBN). Notably, devices using medium-sized molecular hosts and emitters exhibited similar optical and photophysical properties but showed significantly improved reproducibility and thermal stability compared with those based on small molecular hosts and emitters. Our current study provides some insights into molecular design strategies for thermally stable hosts and emitters, which are highly suitable for solution-processed OLEDs.
RESUMEN
Fluorescent nanoparticles used in biomedical applications should be stable in their colloidal form in aqueous media and possess a high quantum yield (QY). We report ultrasmall Ln2O3 (Ln = Eu, Tb, or Dy) nanoparticle colloids with high QYs in aqueous media. The nanoparticles are grafted with hydrophilic and biocompatible poly(acrylic acid) (PAA) to ensure colloidal stability and biocompatibility and with organic photosensitizer 2,6-pyridinedicarboxylic acid (PDA) for achieving a high QY. The PAA/PDA-Ln2O3 nanoparticle colloids were nearly monodispersed and ultrasmall (particle diameter: â¼2 nm). They exhibited excellent colloidal stability with no precipitation after synthesis (>1.5 years) in aqueous media, very low cellular toxicity, and very high absolute QYs of 87.6, 73.6, and 2.8% for Ln = Eu, Tb, and Dy, respectively. These QYs are the highest reported so far for lanthanides in aqueous media. Therefore, the results suggest their high potential as sensitive optical or imaging probes in biomedical applications.
RESUMEN
In this study, in situ silver (Ag) - porous ZnO photocatalysts were synthesized via solvothermal and post-annealing treatment. The formation of the porous ZnO structure due to the removal of organic moieties from the inorganic-organic hybrids Ag-ZnS(en)0.5 during the annealing process. The optimal Ag-ZnO photocatalyst showed excellent photocatalytic degradation activity, with 95.5% orange II dye and 97.2% bisphenol A (BPA) degradation under visible light conditions. Additionally, the photocatalytic inactivation of Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) led to a 97% inactivation rate after 2 h under dark conditions. Trapping experiments suggest that the superoxide anion (O2-) radicals are the main active species to degrade the organic dye. The improved photocatalytic dye degradation activity and inactivation of bacteria were attributed to the synergistic effect of Ag and porous ZnO structure, increased surface area, and efficiently separated the photoexcited charge carriers. This work could provide an effective strategy for the synthesis of porous structures toward organic pollutant degradation and bacterial inactivation in wastewater.
Asunto(s)
Contaminantes Ambientales , Óxido de Zinc , Escherichia coli , Porosidad , Staphylococcus aureus , BacteriasRESUMEN
Photoelectrochemical (PEC) water splitting by semiconductor photoanodes is limited by sluggish water oxidation kinetics coupled with serious charge recombinations. In this paper, an effective strategy of TiO2 nanorod/nanotube nanostructured interface reconstruction, oxygen vacancies and surface modification were employed for stability and efficient charge transport in the photoanodes. Successive anodization and hydrothermal routes were adopted for the TiO2 NR/NT photoanodes interface reconstruction, followed by Au nanoparticles/clusters (Au NP) loading and hydrogen treatment. This resulted in H-Au-TiO2 NR/NT photoanodes. A three-dimensional structure of TiO2 NR on TiO2 NT/Ti foil nanotubes achieved the highest photocurrent density (1.42 mA cm-2 at 0.3 V vs. Ag/AgCl). The optimal oxygen vacancies and Au NP loading on TiO2 NR/NT exhibited 1.62 mA cm-2 photocurrent density at 0.3 V vs. Ag/AgCl in H-Au-TiO2 NR/NT photoelectrode, which is eight times higher than the TiO2 NT/Ti foil. TRPL analyses confirm the hydrogen treatments to TiO2 exhibited the emission lifetime (46 ns) in the H-Au-TiO2 NR/NT photoanodes due to newly formed lower Ti3+-related trapped electron states and Au NP. The optimum H-Au (4)-TiO2 NR/NT photoanodes achieved 95% photoelectrochemical (PEC) bacterial inactivation and effective PEC water splitting with (278 and 135.4) µmol of hydrogen and oxygen generation, respectively. In this study, oxygen vacancies combined with gold particles and interface reconstruction provide an innovative way to design effective photoelectrodes.
Asunto(s)
Nanopartículas del Metal , Nanotubos , Oro , Hidrógeno , OxígenoRESUMEN
Solar energy is the most promising, efficient, environmentally friendly energy source with the potential to meet global demand due to its non-polluting nature. Herein, a porous Zn1-xCdxSe/ZnO nanorod (NR) heterojunction was synthesized by hydrothermal and low-temperature solvothermal methods. First, the ZnO NR was grown on a Zinc foil, and an inorganic-organic hybrid ZnSe(en)0.5 material was developed by the low-temperature solvothermal method. In this work, the ZnO NR acted as a base material and a building block for the growth of ZnSe(en)0.5. Moreover, after the solvothermal process, the reduced Se2- reacts with the ZnO NR and forms inorganic-organic hybrid ZnSe(en)0.5. After the selenization process, the obtained material shows a red brick color due to the absorbance of excessive Se metal particles during the solvothermal process. Furthermore, in order to enhance the photoelectrochemical properties, the Cd2+ ion exchange method was applied at various temperatures (140, 160, and 180 °C for 3 h) to produce a precursor material to a porous Zn1-xCdxSe/ZnO NR nanostructure. The optimum Zn1-xCdxSe/ZnO NR-160 photoanode showed a high photocurrent density of 7.8 mA·cm-2 at -0.5 V vs. Ag/AgCl with a hydrogen evolution rate of 199 µmol·cm-2/3 h. The improved photocurrent performance was attributed to effective light absorption and prolonged recombination lifetime.
RESUMEN
Hydrothermal and wet impregnation methods are presented in this study for synthesizing CoOx(1 wt%)/Sn/Zr-codoped Fe2O3 nanorod photocatalysts for the degradation of organic pollutants and deactivation of bacteria. A hydrothermal route was used to synthesize self-assembled rod-like hierarchical structures of Sn(0-6%) doped Zr-Fe2O3 NRs. Additionally, a wet impregnation method was used to load CoOx onto the surface of photocatalysts (Sn(0-6%)-doped Zr-Fe2O3 NRs). A series of 1 wt% CoOx modified Sn(0-6%)-doped Zr-Fe2O3 NRs were synthesized, characterized, and utilized for the photocatalytic decomposition of organic contaminants, along with the killing of E. coli and S. aureus. In comparison with 0, 2, and 6% Sn co-doped Zr-Fe2O3 NRs, the CoOx(1 wt%)/4%Sn/Zr-Fe2O3 NRs photocatalyst exhibited an E. coli and S. aureus inactivation efficiencies (90 and 98%). A bio-TEM study of treated and untreated bacterial cells revealed that the CoOx(1 wt%)/4%Sn/Zr-Fe2O3 NRs photocatalyst led to considerable changes in the bacterial cell membranes' morphology. The optimal CoOx(1 wt%)/Sn(4%) co-doped Zr-Fe2O3 NRs photocatalyst achieved degradation efficiencies of 98.5% and 94.6% for BPA and orange II dye, respectively. As a result, this work will provide a facile and effective method for developing visible light-active photocatalysts for bacterial inactivation and organic pollutants degradation.
Asunto(s)
Escherichia coli , Nanotubos , Staphylococcus aureus , Catálisis , LuzRESUMEN
Herein, a porous Zn1-xCdxSe structure was developed on TiO2 nanorod (NR) array for photoelectrochemical (PEC) application. Firstly, TiO2 NR and ZnO/TiO2 NR photoanode were synthesized via a series of hydrothermal methods on FTO. Next, the solvothermal synthesis method was adopted to develop inorganic-organic hybrid ZnSe(en)0.5 on ZnO /TiO2 NR-based electrode using different concentrations of the selenium (Se). We found that the ZnO NR acts as a mother material for the formation of inorganic-organic hybrid ZnSe(en)0.5, whereas TiO2 NR acts as a building block. In order to further improve the PEC charge transfer performance, inorganic-organic hybrid ZnSe(en)0.5/TiO2 NR electrode was transferred into a porous Zn1-xCdxSe/TiO2 NR photoanode using the Cd2+ ion-exchange method. The optimized porous Zn1-xCdxSe/TiO2 NR -(2) photoanode converted from ZnSe(en)0.5 -(2) electrode (optimized Se concentration) showed a higher photocurrent density of 6.6 mA·cm-2 at applied potential 0 V vs. Ag/AgCl. The enhanced photocurrent density was owing to the effective light absorption, enhanced charge separation, delay the charge recombination, and porous structure of Zn1-xCdxSe. This work highlights the promising strategy for the synthesis of porous Zn1-xCdxSe/TiO2 NR from inorganic-organic ZnSe(en)0.5/TiO2 NR for effective charge separation and prolonging the lifetime during the photoelectrochemical reaction.
RESUMEN
The process of photoelectrochemical wastewater detoxification is limited by significant charge recombination, which is difficult to suppress with efficient single-material photoanodes. We demonstrated the effectiveness of hydrogen treatment in evaluating charge separation properties in WO3-x/TiO2-x NT/Ti foil heterojunction photoanodes. The influence of varying hydrogen annealing (200-400 °C) on the structural and photoelectrochemical properties of WO3/TiO2 NS/NT heterojunction is studied systematically. Additionally, after hydrogen treatment of pristine WO3/TiO2 NT/Ti foil photoanodes, substoichiometric H-WO3-x/TiO2-x NT-300 achieved the 1.21 mA/cm2 photocurrent density, which is 8.06 and 3.27 times than TiO2 NT and WO3/TiO2 NT. The hydrogen-treated H-WO3-x/TiO2-x NT-300 electrode exhibits 3 times greater bulk efficiencies than the WO3/TiO2 NT electrode due to the production of oxygen vacancies at the interface. Additionally, optimum H-WO3-x/TiO2-x NS/NT-300 photoanode exhibited 93.8% E. coli and 99.8% BPA decomposition efficiencies. The present work shows the effectiveness of microwave-assisted H-WO3-x/TiO2-x NT heterojunction photoanodes for organic decomposition and antibacterial activity in a neutral environment without surface-loaded co-catalysts.
Asunto(s)
Escherichia coli , Titanio , Aguas Residuales , Antibacterianos/farmacología , HidrógenoRESUMEN
Herein, we synthesized in-situ Zr-doped Fe2O3 NRs photocatalyst by successive simple hydrothermal and air quenching methods. The synergistic roles of CoOx (1 wt%) and Zr-doping on bacteria inactivation and model organic pollutants over Fe2O3 NRs photocatalyst were studied in detail. Initially, rod-like Zr ((0-8) %)-doped Fe2O3 NRs were produced via a hydrothermal method. CoOx was loaded onto the Zr ((0-8) %)-doped Fe2O3 NRs) surface by a wet impregnation approach. The Zr-doping conditions and CoOx loadings were judiciously optimized, and a highly photoactive CoOx(1 wt%)/Zr(6%)-doped Fe2O3 NRs photocatalyst was developed. The CoOx(1 wt%) loaded Zr(6%)-doped Fe2O3 NRs photocatalyst revealed 99.4% inactivation efficiency compared with (0, 4 and 8)% Zr-doped Fe2O3 NRs, respectively. After CoOx(1 wt%)/Zr(6%)-doped Fe2O3 NRs photocatalyst treatment, Bio-TEM images of bacterial cells showed extensive morphological deviations in cell membranes, compared with the non-treated ones. Additionally, the optimum CoOx(1 wt%)/Zr(6%)-doped Fe2O3 NRs photocatalyst exhibited 99.2% BPA and 98.3% orange II dye degradation after light radiation for 3 h. This work will provide a rapid method for the development of photostable catalyst materials for bacterial disinfection and organic degradation.
Asunto(s)
Contaminantes Ambientales , Nanotubos , Óxidos , BacteriasRESUMEN
The p53 mutation is inherent in over 50% of human cancers. In head and neck squamous cell carcinoma, the p53 mutation is associated with a poor prognosis. 4Hexylresorcinol (4HR) is a pharmacologic chaperone. The present study aimed to investigate the effect of 4HR on p53 transcriptional activity in oral carcinoma cells with p53 mutations. To identify conformational changes induced by 4HR administration, peptides including the DNAbinding domain from mutant and wildtype p53 were synthesized, and Fourier transform infrared spectroscopy was performed. To determine the effect of 4HR on p53 mutant carcinoma cells, western blot analysis, p53 transcriptional activity analysis, MTT assay and apoptosis immunocytochemistry were performed. The YD15 cell line has a mutation in the DNA binding domain of p53 (Glu258Ala). When p53 Ala258 was coupled by 4HR, the p53 Ala258 structure lost its original conformation and approached a conformation similar to that of p53 Glu258. In the cell experiments, 4HR administration to p53 mutant cells increased p53 transcriptional activity and the expression levels of apoptosisassociated proteins such as Bcell lymphoma 2 (BCL2), BCL2associated X (BAX) and BCL2associated agonist of cell death (BAD). Accordingly, 4HR administration on YD15 cells decreased cell viability and increased apoptosis. In conclusion, 4HR is a potential substance for use in the recovery of lossoffunction in mutant p53 as a pharmacologic chaperone.
Asunto(s)
Carcinoma , Hexilresorcinol , Neoplasias de la Boca , Apoptosis , Línea Celular Tumoral , ADN , Hexilresorcinol/farmacología , Humanos , Neoplasias de la Boca/tratamiento farmacológico , Neoplasias de la Boca/genética , Mutación , Proteínas Proto-Oncogénicas c-bcl-2/metabolismo , Proteína p53 Supresora de Tumor/metabolismoRESUMEN
We have studied the excited-state exciton recombination dynamics of perovskite quantum dots (QDs) through time-resolved photoluminescence (PL), PL blinking, PL intensity-dependent lifetime modulation, and long-term photostability tests. The various spectroscopic characterizations elucidate that the perovskite QDs have multiple intrinsic exciton recombination routes even in a single QD, i.e., exciton, biexciton, and positive/negative trions, which are dissimilarly contributed to ON and OFF state emissions. We also find that the enhanced radiative recombination from placing green QDs on a photonic Ag nanotip array induces notably improved long-term PL stability. We consider that the accelerated radiative recombination of QDs by strong coupling with the plasmonics of the photonic Ag nanotip array, while eliminating nonradiative pathways, is proven to be a critical factor for improved long-term stability.
RESUMEN
Herein, we report a CoOx-loaded Zr-doped ZnFe2O4 (CoOx/Zr-ZFO) NR photocatalyst synthesized by successive microwave and wet impregnation methods for bacterial inactivation and degradation of organic pollutants. For the first time, microwave treatment was used for Zn attachment on hydrothermally synthesized self-assembled Zr-FeOOH NRs to produce Zr-doped ZnFe2O4 (Zr-ZFO) NRs. The lowest bandgap energy (1.96 eV) enables for significant absorption in the visible light region, which helps to improve bacteria degradation inactivation efficiency. Further, various metal oxides (Cu, Ag and Co) were loaded onto the surface of photocatalysts (Zr-ZFO NRs) by a wet impregnation method. As-synthesized CoOx/Zr-ZFO-3 NRs were systematically characterized and used as photocatalysts for inactivation of E. coli and S. aureus and degradation of organic pollutants. The CoOx/Zr-ZFO-3 NR photocatalyst exhibited better inactivation efficiency (99.4 %) than other metal oxide-loaded Zr-ZFO NRs (Ag2Ox-loaded Zr-ZFO NRs (33.6 %), CuOx-loaded Zr-ZFO NRs (77.6 %)). Additionally, the optimum CoOx/Zr-ZFO-3 NR photocatalyst showed 98.3 % and 98.1 % degradation efficiencies for BPA and orange II dye, respectively, under visible light irradiation (λ ≥ 420 nm). Therefore, this work affords a novel, simple and rapid approach for the development of photocatalysts which active in visible light for bacterial disinfection and organic degradation.
Asunto(s)
Contaminantes Ambientales , Nanotubos , Catálisis , Desinfección , Escherichia coli , Luz , Microondas , Óxidos , Staphylococcus aureusRESUMEN
While 2D transition metal dichalcogenides (TMDs) are promising building blocks for various optoelectronic applications, limitations remain for multilayered TMD-based photodetectors: an indirect bandgap and a short carrier lifetime by strongly bound excitons. Accordingly, multilayered TMDs with a direct bandgap and an enhanced carrier lifetime are required for the development of various optoelectronic devices. Here, periodically arrayed nanopore structures (PANS) are proposed for improving the efficiency of multilayered p-WSe2 /n-MoS2 phototransistors. Density functional theory calculations as well as photoluminescence and time-resolved photoluminescence measurements are performed to characterize the photodetector figures of merit of multilayered p-WSe2 /n-MoS2 heterostructures with PANS. The characteristics of the heterojunction devices with PANS reveal an enhanced responsivity and detectivity measured under 405 nm laser excitation, which at 1.7 × 104 A W-1 and 1.7 × 1013 Jones are almost two orders of magnitude higher than those of pristine devices, 3.6 × 102 A W-1 and 3.6 × 1011 Jones, respectively. Such enhanced optical properties of WSe2 /MoS2 heterojunctions with PANS represent a significant step toward next-generation optoelectronic applications.
RESUMEN
Silk sericin is a degumming product used by the silk industry. The degumming process can affect the protein structure and molecular weight of silk sericin. The present study examined how pretreatment with 4-hexylresorcinol (4HR) affects the biomedical properties of silk sericin. Before the degumming process, silkworm cocoons were treated with 4HR solution. The protein structure of the final degumming product was evaluated by Fourier transform infrared spectroscopy (FT-IR) and scanning electron microscopy. Untreated silk sericin (S) and silk sericin pretreated with 4HR (S+4HR) were added to RAW264.7 cells, and the expression of BMP-2 was determined. The bone-regenerating capacity of S+4HR was evaluated using the critical-sized rat calvarial defect model. Compared with S, S+4HR showed an increase in ß-sheet structures. Administration of S+4HR to RAW264.7 cells increased expression of BMP-2, mainly via the TLR-mediated signaling pathway. Bone volume, as measured by micro-computerized tomography, was significantly greater in the S+4HR group than in the S, gelatin alone, and unfilled control groups (p < 0.05 each). Expression of BMP-2 and runx2 in tissue specimens was significantly higher following treatment with S+4HR than with S (p < 0.05). Taken together, these findings show that 4HR pretreatment before the degumming process increased the ß-sheet structure of silk sericin, as well as inducing BMP-2 expression and bone regeneration ability.
Asunto(s)
Bombyx , Hexilresorcinol , Sericinas , Ratas , Animales , Sericinas/química , Hexilresorcinol/farmacología , Espectroscopía Infrarroja por Transformada de Fourier , Conformación Proteica en Lámina beta , Seda/química , Bombyx/metabolismoRESUMEN
In the present study, Mo-BiVO4-loaded and metal oxide (MO: Ag2Ox, CoOx, and CuOx)-loaded Mo-BiVO4 photocatalysts were synthesized using a wet impregnation method and applied for microbial inactivation (Escherichia coli and Staphylococcus aureus) and orange II dye degradation under visible-light (VL) conditions (λ ≥ 420 nm). The amount of MO cocatalysts loaded onto the surface of the Mo-BiVO4 photocatalysts was effectively controlled by varying their weight percentages (i.e., 1-3 wt %). Among the pure Mo-BiVO4, Ag2Ox-, CoOx-, and CuOx-loaded Mo-BiVO4 photocatalysts used in bacterial E. coli and S. aureus inactivation under VL irradiation, the 2 wt % CuOx-loaded Mo-BiVO4 photocatalyst showed the highest degradation efficiency of E. coli (97%) and S. aureus (99%). Additionally, the maximum orange II dye degradation efficiency (80.2%) was achieved over the CuOx (2 wt %)-loaded Mo-BiVO4 photocatalysts after 5 h of radiation. The bacterial inactivation results also suggested that the CuO x -loaded Mo-BiVO4 nanostructure has significantly improved antimicrobial ability as compared to CuOx/BiVO4. The enhancement of the inactivation performance of CuOx-loaded Mo-BiVO4 can be attributed to the synergistic effect of Mo doping and Cu2+ ions in CuOx, which further acted as an electron trap on the surface of Mo-BiVO4 and promoted fast transfer and separation of the photoelectron (e-)/hole (h+) pairs for growth of reactive oxygen species (ROS). Furthermore, during the bacterial inactivation process, the ROS can disrupt the plasma membrane and destroy metabolic pathways, leading to bacterial cell death. Therefore, we provide a novel idea for visible-light-activated photocatalytic antibacterial approach for future disinfection applications.
RESUMEN
Bone morphogenic protein-2/4 (BMP-2/4) is an osteoinductive protein that accelerates osteogenesis when administered to bony defects. Sericin is produced by silkworms, and has a biological activity that differs depending on the degumming method used. Our results indicated that the high molecular weight fraction of silk sericin (MW > 30 kDa) obtained via sonication had a more abundant ß-sheet structure than the low molecular weight fraction. Administration of the ß-sheet structure silk sericin increased BMP-2/4 expression in a dose-dependent manner in RAW264.7 cells and human monocytes. This sericin increased the expression levels of toll-like receptor (TLR)-2, TLR-3, and TLR-4 in RAW264.7 cells. Application of a TLR-2 antibody or TLR pathway blocker decreased BMP-2/4 expression following sericin administration. In the animal model, the bone volume and BMP-2/4 expression were higher in rats treated with a sericin-incorporated gelatin sponge than in rats treated with a gelatin sponge alone or a sponge-incorporated with denatured sericin. In conclusion, sericin with a more abundant ß-sheet structure increased BMP-2/4 expression and bone formation better than sericin with a less abundant ß-sheet structure.