Oral viscous budesonide solution for enhanced localized treatment of eosinophilic esophagitis through improved mucoadhesion and permeation.

Eosinophilic esophagitis (EoE) is a chronic inflammatory disease of the esophagus that is immune/antigen-mediated and often requires targeted treatment. In clinical practice, an oral viscous budesonide suspension prepared by adding sucralose to a budesonide suspension for inhalation (Pulmicort®) is used to treat adult EoE and enhance retention in the esophageal mucosa. Inspired by this off-label drug use, oral viscous budesonide solutions (OVBSs) were developed in this study, and their capacities for adhesion, permeation, and stability were explored. Given the insolubility of budesonide as a BCS II drug, we first evaluated its equilibrium solubility and found that Transcutol® HP was an excellent choice for creating an OVBS at a concentration of 0.2 mg/g. The rheological properties of the OVBSs were evaluated with a rheometer, and shear-thinning, which aids in swallowing, was observed. The addition of hydroxyethyl cellulose (HEC) increased the adhesion strength of the preparation, which was associated with the hydration and thickening mechanism. This result was confirmed in a dynamic gelation study and in vitro elution experiment conducted with porcine esophagus tissue. Furthermore, the permeabilities of the OVBSs in the porcine esophagus were evaluated with a Franz diffusion cell device. >80 % of the budesonide was released after 24 h, and the release profile was similar to that of the solution. To explore the storage conditions of OVBSs, critical factors such as pH, content, and impurities were determined. It was found that OVBSs exhibited different behaviors at different pH values and temperatures. Notably, the OVBSs containing 1.7 % HEC could be stored for >6 months at a temperature of 5 °C ± 3 °C and a pH of 4.5 without significant degradation. Overall, this study demonstrated that OVBSs have the potential to adhere to the esophageal mucosa, permeate the tissue, and remain stable during storage. Moreover, OVBSs exhibit a distinct advantage over traditional converted inhalation-to-oral budesonide therapies by enabling flexible dose adjustment in clinical applications, thereby potentially minimizing systemic side effects commonly associated with oral glucocorticoid administration.

Autophagy flux inhibition augments gastric cancer resistance to the anti-human epidermal growth factor receptor 2 antibody trastuzumab.

The autophagy involved in the occurrence, development and prognosis of human epidermal growth factor receptor 2 (HER2) gene-amplified cancer also controls the resistance of this type of cancer to the monoclonal antibody, trastuzumab (Tzb). In the present study, Tzb resistance was established in HER2-positive NCI-N87 cell lines (Tzb-refractory cells). The cell viability, clonogenic assay, ratios of light chain 3 II/I, sequestosome 1 expression, and the phosphorylation of protein kinase B (Akt) and mechanistic target of rapamycin (mTOR) were investigated in the parental and Tzb-refractory cells. The viability of parental NCI-N87 and Tzb-refractory cells with an autophagy inhibitor or inducer was also examined. The results of the present study indicated that autophagic flux may have an important function in the resistance of HER2-positive human gastric cancer NCI-N87 cells to Tzb. Tzb resistance in NCI-N87 cells prevents cell apoptosis via autophagic flux inhibition. Tzb may activate the Akt/mTOR pathway to inhibit autophagic flux in gastric cancer cell lines. Everolimus, an mTOR inhibitor, may inhibit cell viability, indicating that the mTOR pathway may serve a function in HER2-positive gastric cancer and that the resistance of HER2-positive gastric cancer to Tzb may, at least partially, be due to activation of the mTOR pathway.

Fused Deposition Modeling (FDM) 3D Printed Tablets for Intragastric Floating Delivery of Domperidone.

The aim of this study was to explore the feasibility of fused deposition modeling (FDM) 3D printing to prepare intragastric floating sustained release (FSR) tablets. Domperidone (DOM), an insoluble weak base, was chosen as a model drug to investigate the potential of FSR in increasing its oral bioavailability and reducing its administration frequency. DOM was successfully loaded into hydroxypropyl cellulose (HPC) filaments using hot melt extrusion (HME). The filaments were then printed into hollow structured tablets through changing the shell numbers and the infill percentages. Physical characterization results indicated that the majority of DOM gradually turned into the amorphous form during the fabrication process. The optimized formulation (contain 10% DOM, with 2 shells and 0% infill) exhibited the sustained release characteristic and was able to float for about 10 h in vitro. Radiographic images showed that the BaSO4-labeled tablets were retained in the stomach of rabbits for more than 8 h. Furthermore, pharmacokinetic studies showed the relative bioavailability of the FSR tablets compared with reference commercial tablets was 222.49 ± 62.85%. All the results showed that FDM based 3D printing might be a promising way to fabricate hollow tablets for the purpose of intragastric floating drug delivery.

A Three-Pulse Release Tablet for Amoxicillin: Preparation, Pharmacokinetic Study and Physiologically Based Pharmacokinetic Modeling.

BACKGROUND: Amoxicillin is a commonly used antibiotic which has a short half-life in human. The frequent administration of amoxicillin is often required to keep the plasma drug level in an effective range. The short dosing interval of amoxicillin could also cause some side effects and drug resistance, and impair its therapeutic efficacy and patients' compliance. Therefore, a three-pulse release tablet of amoxicillin is desired to generate sustained release in vivo, and thus to avoid the above mentioned disadvantages. METHODS: The pulsatile release tablet consists of three pulsatile components: one immediate-release granule and two delayed release pellets, all containing amoxicillin. The preparation of a pulsatile release tablet of amoxicillin mainly includes wet granulation craft, extrusion/spheronization craft, pellet coating craft, mixing craft, tablet compression craft and film coating craft. Box-Behnken design, Scanning Electron Microscope and in vitro drug release test were used to help the optimization of formulations. A crossover pharmacokinetic study was performed to compare the pharmacokinetic profile of our in-house pulsatile tablet with that of commercial immediate release tablet. The pharmacokinetic profile of this pulse formulation was simulated by physiologically based pharmacokinetic (PBPK) model with the help of Simcyp®. RESULTS AND DISCUSSION: Single factor experiments identify four important factors of the formulation, namely, coating weight of Eudragit L30 D-55 (X1), coating weight of AQOAT AS-HF (X2), the extrusion screen aperture (X3) and compression forces (X4). The interrelations of the four factors were uncovered by a Box-Behnken design to help to determine the optimal formulation. The immediate-release granule, two delayed release pellets, together with other excipients, namely, Avicel PH 102, colloidal silicon dioxide, polyplasdone and magnesium stearate were mixed, and compressed into tablets, which was subsequently coated with Opadry® film to produce pulsatile tablet of amoxicillin. In vitro release study firstly indicated a three-pulse release profile of the tablet. Later the pulse tablet was found to generate the sustained release of amoxicillin in beagle dogs. Furthermore, the Simcyp® software was used to simulate the in vivo concentration time curve model of the three-pulse release tablet for amoxicillin in both human and beagle dog. The prediction by PBPK model nicely fitted the observation in human and beagle dog. CONCLUSIONS: This study has demonstrated the interrelation of factors affecting the pulsatile formulation of amoxicillin using a Box-Behnken design. The three-pulse release tablets of amoxicillin were proven to generate pulsatile release in vitro and sustained release in vivo. This formulation was also found to extend the effective plasma concentration in human compared to the tablet of immediate release based on the simulation data by PBPK modeling. This study provides an example of using PBPK to guide the development of pulsatile dosage forms.

Pharmacokinetics of tramadol in rat plasma and cerebrospinal fluid after intranasal administration.

We have evaluated the potential of intranasal administration of tramadol. The pharmacokinetic behaviour of tramadol in rat plasma and cerebrospinal fluid (CSF) after intranasal administration was determined and compared with those after intravenous and oral administration. Serial plasma and CSF samples were collected for 6 h, and the drug concentrations were assayed by an HPLC-fluorescence method. The plasma absolute bioavailability values of tramadol after intranasal and oral administration were 73.8% and 32.4%, respectively, in conscious rats. The Cmax (maximum concentration) value after the intranasal dose was lower (P<0.05), and the MRT (mean retention time) was longer (P<0.05) than the values obtained after intravenous administration. A pharmacokinetic study of tramadol in plasma and CSF was undertaken in anaesthetized rats. The absolute bioavailability values in plasma and CSF after intranasal administration were 66.7% and 87.3%, respectively. The Cmax values in plasma and CSF after a nasal dose were lower (P<0.05) than after the intravenous dose. The values of Cmax and AUC0-->6 h in plasma and CSF after intranasal administration were higher than after the oral dose. The mean drug-targeting efficiency after intranasal administration was significantly greater than after the oral dose. In conclusion, intranasal administration of tramadol appeared to be a promising alternative to the traditional administration modes for this drug.

Determination of Huperzine A in rat plasma by high-performance liquid chromatography with a fluorescence detector.

A simple reversed-phase high-performance liquid chromatography (HPLC)-fluorescence method for the determination of Huperzine A in rat plasma was developed and validated. Separation was achieved on Kromasil C(8) column (5 microm, 150 mm x 4.6mm i.d.). The mobile phase, methanol-water-triethanol amine (45:55:0.05, v/v/v), was delivered at a flow rate of 1.0 ml/min. The eluent was monitored by a fluorescence detector with excitation wavelength at 310 nm and emission wavelength at 370 nm. No interfering peaks were observed in rat blank plasma. The relationship between Huperzine A concentration and peak-area ratio of Huperzine A to the IS was linear over the range of 2.5-250 ng/ml. The intra- and inter-day coefficients of variation were

Huperzine A in rat plasma and CSF following intranasal administration.

This paper presents to investigate the levels of Huperzine A in plasma and CSF of rats after three different kinds of administrations and to find out whether intranasal administration is the best route to transfer the drug into the CNS. The drugs of two doses (167 and 500 microg/kg) were administered to male Sprague-Dawley rats intravenously, intranasally and intragastricly, respectively. Series plasma and cerebrospinal fluid (CSF) samples were collected from femoral artery and cisterna magna for 6h. The drug concentrations were determined by HPLC-fluorescence method. The AUC(plasma) and the AUC(CSF) of intranasal administration were 90.3% and 127.7% in low dose group (167 microg/kg) and 91.3% and 69.4% in high dose group (500 microg/kg) compared with intravenous administration. The AUC(plasma) and the AUC(CSF) of intragastric administration were 98.9% and 52.1% in high dose group (500 microg/kg) compared with intravenous administration.