Identification of countercurrent tubule-vessel arrangements in the early development of mouse kidney based on immunohistochemistry and computer-assisted 3D visualization.

Nephron loop-vessel countercurrent arrangement in the medulla provides the structural basis for the formation of concentrated urine. To date, the morphogenesis of it and relevant water and solutes transportation has not been fully elucidated. In this study, with immunohistochemistry for aquaporins (AQP) and Na-K-2Cl co-transporter (NKCC2), as well as 3D visualization, we noticed in embryonic day 14.5 kidneys that the countercurrent arrangement of two pairs of loop-vessel was established as soon as the loop and vessel both extended into the medulla. One pair happened between descending limb and ascending vasa recta, the other occurred between thick ascending limb and descending vasa recta. Meanwhile, the immunohistochemical results showed that the limb and vessel expressing AQP-1 such as descending thick and thin limb and descending vasa recta was always accompanied with AQP-1 negative ascending vasa recta or capillaries and thick ascending limb, respectively. Moreover, the thick ascending limb expressing NKCC2 closely contacted with descending vasa recta without expressing NKCC2. As kidney developed, an increasing number of loop-vessels in countercurrent arrangement extended into the interstitium of the medulla. In addition, we observed that the AQP-2 positive ureteric bud and their branches were separated from those pairs of tubule-vessels by a relatively large and thin-walled veins or capillaries. Thus, the present study reveals that the loop-vessel countercurrent arrangement is formed at the early stage of nephrogenesis, which facilitates the efficient transportation of water and electrolytes to maintain the medullary osmolality and to form a concentrated urine.

Ultrastructural identification of developing proximal tubules based on three-dimensional reconstruction.

BACKGROUND: The cellular mechanisms involved in the development of proximal tubules are not only associated with morphogenesis in fetal life, but also with restoration of damaged tubules in adulthood. Knowledge about morphological features of cell differentiation and proliferation along the developing tubule is insufficient, which hinders identification of the cellular origin. OBJECTIVES: This study aimed to investigate ultrastructures of the proximal tubule at different stages of nephrogenesis. METHODS: Electron microscopy was used and guided by computer-assisted tubular tracing to identify the cellular structures. RESULTS: Renal vesicles and S-shaped bodies revealed more proliferative features, such as densely-packed fusiform-shaped cells with numerous protein-producing organelles than membrane specializations typical for mature tubules. At the capillary-loop stage the proximal tubules demonstrated all characteristics of the mature tubules, but not as developed, including shorter but densely packed microvilli, fewer lateral processes with cell-cell contacts, lower basal membrane infoldings, and lower mitochondrial volume density. However, they exhibited an elaborated endocytic system above the nucleus, indicating a membrane transport is being established. Abundant free- and endoplasmic reticulum-adhered ribosomes and Golgi complexes reflected active protein synthesis for cell growth and proliferation. Interestingly, electron dense cells were occasionally intermixed with electron lucent cells characterized by various organelles in less cytosol and a larger nucleus with abundant euchromatin, which is a feature of active proliferation. CONCLUSIONS: These ultrastructures indicate that the morphogenesis of the developing proximal tubule corresponds to the gradually established physiological activities. The two different cellular electron densities may suggest distinctive differentiation of the cells along the tubule.

Morphology of the initial nephron-collecting duct connection in mice using computerized 3D tracing and electron microscopy.

Recently, the cellular origin of the connecting tubule (CNT) has been genetically characterized. The CNT is a segment between two embryonically different structures, the collecting duct originating from ureteric bud (UB), and the nephron derived from the cap mesenchyme. However, the cellular detail at the initial connection is limited. The present study demonstrated that the initial connection was composed of cells which were closely associated with the renal vesicle (RV), the initial nephron, and connected with the basal epithelium of the terminal UB tip at discrete points. The identification of the RV and UB tip was based on tracing of tubules on serial epoxy sections at mouse embryonic day 17.5. The cells at the initial connection were characterized by 1) irregularly-shaped nuclei and cells with cytoplasmic processes, 2) electron dense nuclei, 3) abundant intercellular spaces, 4) extensive cell-cell contacts with cell junctions, often zonulae adherences and occasionally focal fusion of opposing plasma membranes, and 5) numerous mitochondria, densely packed rosette-like polyribosomes, and widespread rER in the cytoplasm. Moreover, the tracing revealed that a terminal UB tip frequently connected to two nephrons at different developing stages. The UB tips, the initial connections, and the distal tubules of the S-shaped bodies did not express Na+-Cl- cotransporter, H+-ATPase, or aquaporin 2, while they were expressed in immature CNT of the capillary-loop stage nephrons throughout the kidney development. Consequently, the cells at the initial connection exhibit the morphological features suggestive of energy demanding, protein producing, and intercellular communicating. The cell morphology together with transporter development indicates that these cells serve several functions during the development of the initial connection, and that these functions are different from the cells' final functions as transportation.

Morphologic and morphometric study on microvasculature of developing mouse kidneys.

A proper morphogenesis of the renal microvasculature is crucial not only for fulfilling the renal function but also to slow down the progression of chronic kidney disease in adulthood. However, the current description of the developing microvasculature is incomplete. The present study investigated the morphogenesis and volume densities of the renal microvasculature using computer-assisted tubular tracing, immunohistochemistry for CD34, and unbiased stereology. The earliest glomerular capillaries were observed at the lower cleft of the S-shaped nephrons, as simple loops connecting the afferent and efferent arterioles. In parallel with this, the peritubular capillaries were established. Noticeably, from early nephrogenesis on, the efferent arterioles of the early-formed glomeruli ran in close proximity to their own thick ascending limbs. In addition, the ascending vasa recta arising from the arcuate or interlobular veins also ran in close proximity to the thick descending limb. Thus, the tubules and vessels formed the typical countercurrent relation in the medulla. No loop bends were observed between descending and ascending vasa recta. The volume density of the cortical and medullary peritubular capillary increased 3.3- and 2.6-fold, respectively, from 2.34 (0.13) and 7.03 (0.09)% [means (SD)] at embryonic day 14.5 (E14.5) to 7.71 (0.44) and 18.27 (1.17)% at postnatal day 40 (P40). In contrast, the volume density of glomeruli changed only slightly during kidney development, from 4.61 (0.47)% at E14.5 to 6.07 (0.2)% at P7 to 4.19 (0.47)% at P40. These results reflect that the growth and formation of the renal microvasculature closely correspond to functional development of the tubules.

A reference-free method for brightness compensation and contrast enhancement of micrographs of serial sections.

Three-dimensional (3D) reconstruction of an organ or tissue from a stack of histologic serial sections provides valuable morphological information. The procedure includes section preparation of the organ or tissue, micrographs acquisition, image registration, 3D reconstruction, and visualization. However, the brightness and contrast through the image stack may not be consistent due to imperfections in the staining procedure, which may cause difficulties in micro-structure identification using virtual sections, region segmentation, automatic target tracing, etc. In the present study, a reference-free method, Sequential Histogram Fitting Algorithm (SHFA), is therefore developed for adjusting the severe and irregular variance of brightness and contrast within the image stack. To apply the SHFA, the gray value histograms of individual images are first calculated over the entire image stack and a set of landmark gray values are chosen. Then the histograms are transformed so that there are no abrupt changes in progressing through the stack. Finally, the pixel gray values of the original images are transformed into the desired ones based on the relationship between the original and the transformed histograms. The SHFA is tested on an image stacks from mouse kidney sections stained with toluidine blue, and captured by a slide scanner. As results, the images through the entire stack reveal homogenous brightness and consistent contrast. In addition, subtle color differences in the tissue are well preserved so that the morphological details can be recognized, even in virtual sections. In conclusion, compared with the existing histogram-based methods, the present study provides a practical method suitable for compensating brightness, and improving contrast of images derived from a large number of serial sections of biological organ.

Non-rigid landmark-based large-scale image registration in 3-D reconstruction of mouse and rat kidney nephrons.

BACKGROUND: Serial histological sections are suffering from mechanical distortions that disturb the reconstruction of 3-D objects. We have corrected such artifacts with a non-rigid landmark-based method that respects the original geometry in the tissue block. The method is exemplified on a large scale in the registration of semi-thin serial sections of the mouse and rat kidneys, and has been tested on FFPE-sections. AIM: In this study of mouse and rat kidneys, we have measured and characterized the deformations introduced in the preparation of 2.5-µm-thick Epon sections and then eliminated them by a landmark-based non-rigid transformation (NRT). METHODS: We obtained 2.5-µm-thick serial Epon sections from three mouse kidneys and three rat kidneys for 3-D reconstruction of the nephron tubules. First, the images from 3000 serial mouse and 13,000 serial rat sections underwent a classic rigid registration (CRR), and the distortions were measured and indexed. The section images underwent a further NRT in order to compensate for the deformations. The NRT used is a classic interactive landmark-based approach. The quality of the NRT was verified by comparing the geometry of the transformed images with corresponding block images. RESULTS: After CRR, the 2.5-µm-thick sections had a linear deformation of up to 2%, the tubular lengths were overestimated with up to 1.5×, and it was most difficult to trace the tubules from section to section. After the additional NRT, the geometry of the images reflected the original geometry in the block, the tubular lengths were no longer overestimated, and the NRT highly facilitated the tracing of the tubular system. CONCLUSIONS: NRT has facilitated the tracing of the tubular system in kidneys, a tracing, which would otherwise have been most difficult to perform. NRT has yielded substantial new knowledge to segmental and spatial nephron organization in the mouse and rat kidneys.