RESUMEN
In light of the pressing need to reduce carbon emissions, the biomass power generation industry has gained significant attention and has increasingly become a crucial focus in China. However, there are still considerable gaps in the historical background, status, and prospects of biomass power generation. Herein, the historical and current status of biomass power generation in China are systematically reviewed, with a particular emphasis on supportive policies, environmental impacts, and future projections. By 2022, the newly installed capacity for biomass power generation reached 3.34 MW with a total installed capacity of 41 MW. The power produced from biomass power generation is 182.4 billion kWh in China. The total installed capacity and generated power in 2022 were 1652 and 1139 folds higher than in 2006 when the first biomass generation plant was established. However, disparities in the distribution of biomass resources and power generation were observed. Key drivers of the industry development include tax, finance, and subsidy policies. Under the implementation of the 14th Five-Year Plan for renewable energy development and the goal of carbon neutrality, biomass power generation may achieve great success through more targeted policy support and advanced technologies that reduce air pollutant emissions. If combined with Bioenergy with Carbon Capture and Storage (BECCS) technology, biomass power generation will make its contribution to carbon neutrality in China.
Asunto(s)
Biomasa , China , Carbono/análisis , Centrales Eléctricas , Contaminación del Aire/prevención & control , Contaminación del Aire/estadística & datos numéricos , Contaminantes Atmosféricos/análisis , Energía RenovableRESUMEN
Agroforestry waste and cow manure pollute the environment, of which, agroforestry waste is difficult to degrade. Compost is an effective way to dispose agroforestry waste; however, the low degradation efficiency of lignocellulose in agroforestry waste affects the process of composting humification. This study investigated lignocellulose degradation and composting humification in full-size apple wood and cow manure composting processes by applying different pretreatments (acidic, alkaline, and high-temperature) to apple wood. Simultaneously, physicochemical characterization and metagenome sequencing were combined to analyze the function of carbohydrate-active enzymes database (CAZy). Therefore, microbial communities and functions were linked during the composting process and the lignocellulose degradation mechanism was elaborated. The results showed that the addition of apple wood increased the compost humus (HS) yield, and pretreatment of apple wood enhanced the lignocellulose degradation during composting processes. In addition, pretreatment improved the physicochemical properties, such as temperature, pH, electric conductivity (EC), ammonium nitrogen (NH4+), and nitrate nitrogen (NO3-) in the compost, of which, acid treated apple wood compost (AcAWC) achieved the highest temperature of 58.4 °C, effectively promoting nitrification with NO3- ultimately reaching 0.127 g/kg. In all composts, microbial networks constructed a high proportion of positively correlated connections, and microorganisms promoted the composting process through cooperation. The proportions of glycosyltransferase (GT) and glycoside hydrolase (GH) promoted the separation and degradation of lignocellulose during composting to form HS. Notably, the adverse effects of the alkali-treated apple wood compost on bacteria were greater. AcAWC showed significant correlations between bacterial and fungal communities and both lignin and hemicellulose, and had more biomarkers associated with lignocellulose degradation and humification. The lignin degradation rate was 24.57 % and the HS yield increased by 27.49 %. Therefore, AcAWC has been confirmed to enhance lignocellulose degradation and promote compost humification by altering the properties of the apple wood and establishing a richer microbial community.
Asunto(s)
Compostaje , Lignina , Malus , Estiércol , Madera , Lignina/metabolismo , Animales , Bovinos , Biomasa , Sustancias Húmicas , Biodegradación AmbientalRESUMEN
Soil heavy metal pollution is an important issue that affects human health and ecological well-being. In-situ thermal treatment techniques, such as self-sustaining smoldering combustion (SSS), have been widely studied for the treatment of organic pollutants. However, the lack of fuel in heavy metal-contaminated soil has hindered its application. In this study, we used corn straw as fuel to investigate the feasibility of SSS remediation for copper and lead in heavy metal-contaminated soil, as well as to explore the remediation mechanism. The results of the study showed that SSS increased soil pH, electrical conductivity (EC), total phosphorus (TP), total potassium (TK), rapidly available phosphorus (AP), and available potassium (AK), while decreasing total nitrogen (TN), alkali-hydrolyzed nitrogen (AN), and cation exchange capacity (CEC). The oxidation state of copper (Cu) increased from 10% to 21%-40%, and the residual state of lead (Pb) increased from 18% to 51%-73%. The Toxicity characteristic leaching procedure (TCLP) of Cu decreased by a maximum of 81.08%, and the extracted state of Diethylenetriaminepentaacetic acid (DTPA) decreased by 67.63%; the TCLP of Pb decreased by a maximum of 81.87%, and DTPA decreased by a maximum of 85.68%. The study indicates that SSS using corn straw as fuel successfully achieved remediation of heavy metal-contaminated soil. However, SSS does not reduce the content of copper and lead; it only changes their forms in the soil. The main reasons for the fixation of copper and lead during the SSS process are the adsorption of biochar, complexation with -OH functional groups, binding with π electrons, and the formation of crystalline compounds. This research provides a reference for the application of SSS in heavy metal-contaminated soil and has potential practical implications.
Asunto(s)
Cobre , Restauración y Remediación Ambiental , Estudios de Factibilidad , Plomo , Contaminantes del Suelo , Cobre/química , Cobre/análisis , Plomo/análisis , Plomo/química , Contaminantes del Suelo/análisis , Contaminantes del Suelo/química , Restauración y Remediación Ambiental/métodos , Zea mays/química , Suelo/químicaRESUMEN
Endocrine disrupting chemicals like triclosan (TCS) have been thought to be an emergent environmental pollutant. The ubiquitous dissolved organic matter (DOM) is able to interrelate with TCS and hamper its phototransformation. However, how the components in DOM can inhibit the photodegradation of DOM/TCS complex is largely unknown. Herein, we discovered that TCS photodegradation with biochar-derived DOM (BDOM) was interfered by both binding affinity and reactive oxygen species (ROS) productivity. BDOM can not only stimulate TCS photodegradation by producing ROS, but also inhibit the removal of TCS through the interactions between BDOMs and TCS. The quantification of BDOM's impact on TCS photodegradation revealed that BDOM hampered TCS removal with the proportion of -7.95 to -11.24% at pH 8.5, but strengthened it to 13.20% at pH 7.0. Binding process was more easily to inhibit TCS photodegradation in molecular form, while anionic TCS photodegradation was dominated by ROS productivity. Different inhibition mechanisms were involved in TCS photodegradation depending on the components of BDOMs. The hydroxyls and aromatic carbonyls might have hindered the attack of ROS on the phenolic hydroxyl of TCS via hydrogen bond interaction or π-π electron donor-acceptor interaction. Through hydrophobic interaction, the mobile aliphatics could greatly shield TCS to prevent ROS attack by wrapping or twining TCS, playing a significant role in inhibiting TCS removal. Results from this present study can afford a new viewpoint in elucidating the function of BDOMs in the phototransformation of organics and decrease the spread of antibiotic resistance genes.
Asunto(s)
Carbón Orgánico , Triclosán , Contaminantes Químicos del Agua , Fotólisis , Materia Orgánica Disuelta , Especies Reactivas de Oxígeno , Contaminantes Químicos del Agua/químicaRESUMEN
To investigate the mechanisms by which g-C3N4 alleviates metal(loid)-induced phytotoxicity, rice seedlings were exposed to 100 and 250 mg/kg graphitic carbon nitride (g-C3N4) with or without coexposure to 10 mg/kg Cd and 50 mg/kg As for 30 days. Treatment with 250 mg/kg g-C3N4 significantly increased shoot and root fresh weight by 22.4-29.9%, reduced Cd and As accumulations in rice tissues by 20.6-26.6%, and elevated the content of essential nutrients (e.g., K, S, Mg, Cu, and Zn) compared to untreated controls. High-throughput sequencing showed that g-C3N4 treatment increased the proportion of plant-growth-promoting endophytic bacteria, including Streptomyces, Saccharimonadales, and Thermosporothrix, by 0.5-3.30-fold; these groups are known to be important to plant nutrient assimilation, as well as metal(loid) resistance and bioremediation. In addition, the population of Deinococcus was decreased by 72.3%; this genus is known to induce biotransformation As(V) to As(III). Metabolomics analyses highlighted differentially expressed metabolites (DEMs) involved in the metabolism of tyrosine metabolism, pyrimidines, and purines, as well as phenylpropanoid biosynthesis related to Cd/As-induced phytotoxicity. In the phenylpropanoid biosynthesis pathway, the increased expression of 4-coumarate (1.13-fold) and sinapyl alcohol (1.26-fold) triggered by g-C3N4 coexposure with Cd or As played a critical role in promoting plant growth and enhancing rice resistance against metal(loid) stresses. Our findings demonstrate the potential of g-C3N4 to enhance plant growth and minimize the Cd/As-induced toxicity in rice and provide a promising nanoenabled strategy for remediating heavy metal(loid)-contaminated soil.
Asunto(s)
Oryza , Contaminantes del Suelo , Cadmio/toxicidad , Oryza/metabolismo , Arseniatos/metabolismo , Bacterias/metabolismo , Contaminantes del Suelo/análisis , Raíces de Plantas/metabolismo , SueloRESUMEN
Due to large specific surface area, abundant surface functional groups, and stable chemical structure, biochar has been widely used in many environmental fields, including the remediation of Cr pollution. Alternatively, electrochemically active organic matter (e-OM), which is prevalent in both natural environments and industrial wastewater, exerts an inevitable influence on the mechanisms underlying Cr(VI) removal by biochar. The synergistic interplay between biochar and e-OM in the context of Cr(VI) remediation remains to be fully elucidated. In this study, disodium anthraquinone-2,6-disulfonate (AQDS) was used as a model for e-OM, characterized by its quinone group's ability to either donate or accept electrons. We found that AQDS sped up the Cr(VI) removal process, but the enhancement effect decreased with the increase in pyrolysis temperature. With the addition of AQDS, the removal amount of Cr(VI) by BC300 and BC600 increased by 160.0% and 49.5%, respectively. AQDS could release more electrons trapped in the lower temperature biochar samples (BC300 and BC600) for Cr(VI) reduction. However, AQDS inhibited the Cr(VI) removal by BC900 due to the adsorption of AQDS on biochar surface. In the presence of the small molecule carbon source lactate, more AQDS was adsorbed onto the biochar surface. This led to an inhibition of the electron transfer between biochar and Cr(VI), resulting in an inhibitory effect. This study has elucidated the electron transfer mechanism involved in the removal of Cr(VI) by biochar, particularly in conjunction with e-OM. Furthermore, it would augment the efficacy of biochar in applications targeting the removal of heavy metals.
RESUMEN
Arsenic (As) contamination is a major threat to drinking water quality throughout the world, and the development of appropriate remediation methods is critical. Adsorption is considered the most effective method for remediation of As-contaminated water. Biochar is a promising adsorbent and widely discussed for As removal due to its potential low cost and environmental friendliness. However, pristine biochar generally exhibited relatively low adsorption capacity for As mainly due to the electrostatic repulsion between the negatively charged biochar and As. Biochar modification, especially metal modification, was developed to boost the adsorption capacity for As. A systematic analysis of As removal as affected by biochar properties and modification will be of great help for As removal. This paper presents a comprehensive review on As removal by biochars from different feedstock, preparation procedures, and modification methods, with a major focus on the possible mechanisms of interaction between As and biochar. Biochar derived from sewage sludge exhibited relatively high adsorption capacity for As. Considering energy conservation, biochars prepared at 401-500 °C were more favorable in adsorbing As. Fe-modified biochar was the most popular modified biochar for As remediation due to its low cost and high efficiency. In addition, the limitations of the current studies and future perspectives are presented. The aim of this review is to provide guidance for the preparation of low-cost, environmentally friendly, and high efficiency biochar for the remediation of As-contaminated water.
Asunto(s)
Arsénico , Contaminantes Químicos del Agua , Carbón Orgánico , Metales , Adsorción , Aguas del AlcantarilladoRESUMEN
In this study, the biochar-goethite composites (MBC@FH) were synthesized through co-ball milling and the degradation of triphenyl phosphate (TPhP) was compared in persulfate (PDS) alone system and MBC@FH&PDS systems. The results showed that TPhP can be effectively degraded in PDS alone system and degradation efficiency reached up to 90 % within reaction of 8 h, at a PDS concentration of 10 mM, a reaction temperature of 30 °C and a system pH of 6.12. The obvious degradation can be ascribed to the reactive oxygen species (ROS) generated by self-decompose of PDS, among which 1O2, âOH and O2â- play a major role in the degradation process. Although 350 °C biochar-goethite composites (MBC35@FH) and 800 °C biochar-goethite composites (MBC80@FH) facilitated PDS activation to produce more ROS, the catalytic degradation of TPhP was different in their systems. The degradation of TPhP was inhibited by MBC35@FH due to its stronger adsorption for TPhP, while MBC80@FH promoted TPhP degradation and degradation efficiency was up to 100 % within 6 h. 1O2 and SO4â- played a stronger degradation role than âOH and O2â- in above systems. The transformation of Fe species, functional groups (oxygen-containing functional groups, pyrrolic nitrogen) and persistent free radicals (PFRs) on the MBC@FH were involved in the PDS activation to produce ROS. Furthermore, MBC80@FH was more capable of activating PDS than MBC35@FH due to its abundant defect sites, larger specific surface area, more PFRs, higher Fe content and stronger electron transfer capability. In addition, seven possible TPhP intermediates were identified and possible degradation pathways of TPhP were proposed accordingly. This study illustrated that not all metallic carbon catalysts are necessarily beneficial for organic contaminants degradation.
Asunto(s)
Carbón Orgánico , Especies Reactivas de Oxígeno , Carbón Orgánico/química , Radicales Libres/químicaRESUMEN
Investigators are debating on the positive and negative priming effects of biochar on native soil organic carbon (SOC), which is largely attributed to the technical barrier of identifying biochar contribution to the apparently measured SOC or mineralized CO2. We combined benzene polycarboxylic acids (BPCAs) molecular biomarkers and soil particle density fractionation to identify biochar contributions to the carbon content in three representative allitic soils in Yunnan. The soil-biochar mixture was incubated for one-month to avoid significant biodegradation of biochar. The results showed that BPCAs were mainly distributed in free light fractions (fLF) up to 87 % of the total BPCAs contents after one month incubation. Recognition of BPCAs in occluded light fractions (oLF) and heavy fractions (HF) suggested a significant interaction between biochar and soil mineral particles. In addition, the percentage of B6CA is comparable or even higher in HF than in fLF or oLF. Thus, biochar-mineral interactions may be an additional stabilization mechanism besides the condensed aromatic structures in biochar. The apparently measured carbon contents increased after biochar application, and both positive and negative priming effects to native SOC were observed after deducting biochar contents based an accurate calculation from BPCAs. The most native SOC depletion (positive priming effects) was noted for the soil with the most favored biochar embedding in soil mineral compositions. This study emphasized that combining BPCAs molecular biomarkers and soil particle density fractionation could accurately quantify different carbon pools, and thus facilitate a comprehensive understanding on the stabilization and turnover of biochar in soils.
Asunto(s)
Benceno , Suelo , Suelo/química , Benceno/análisis , Carbono/análisis , China , Carbón Orgánico/química , Minerales , Ácidos Carboxílicos , BiomarcadoresRESUMEN
Biochar-immobilized bacteria have been widely used to remove organic pollutants; however, the enhanced effect of biochar-immobilized bacteria on tetrabromobisphenol A (TBBPA) removal has not been fully investigated and the removal mechanism remains unclear. In this study, a bacterial strain with high TBBPA degradation ability, Burkholderia cepacian Y17, was isolated from an e-waste disassembly area, immobilized with biochar, and used for the removal of TBBPA. Comparisons were performed of the factors affecting the immobilization and TBBPA removal efficiency, including the biochar preparation temperature, immobilization temperature, and pH. The highest 7-day TBBPA removal efficiency by immobilized bacteria was observed with the most suitable biochar preparation temperature (BC500) and an immobilization pH and temperature of 7 and 35 °C, respectively. The TBBPA removal efficiency reached 59.37%, which was increased by 30.23% and 15.88% compared to that of free and inactivated immobilized Y17, respectively. The suitable biochar preparation temperature BC500, immobilization temperature of 35 °C, and neutral pH of 7 increased the bacterial population and extracellular polymer concentration, which facilitated bacterial immobilization on biochar and promoted TBBPA removal. In this case, the high immobilized bacteria concentration (4.62 × 108 cfuâg-1) and protein and polysaccharide contents (28.43 and 16.16 mg·g-1) contributed to the removal of TBBPA by facilitating TBBPA degradation. The main TBBPA degradation processes by BC500-immobilized Y17 involved debromination, ß-scission, demethylation, O-methylation, hydroxylation, and hydroxyl oxidation. This study proposes a method for preparing immobilized bacteria for TBBPA removal and enriches the microbial degradation technology for TBBPA.
Asunto(s)
Bacterias , Carbón Orgánico , Bifenilos Polibrominados , Polisacáridos Bacterianos , Bacterias/metabolismo , Bifenilos Polibrominados/metabolismoRESUMEN
Many studies have elucidated health concerns of informal e-waste recycling activities, yet few has evaluated the effectiveness of the regulations as well as the human exposure risks to adjacent residents. Herein, legacy polybrominated diphenyl ethers (PBDEs), hexabromocyclododecane (HBCDs), and alternative organophosphate esters (OPEs) were investigated in indoor dust collected from three e-waste industrial parks and five adjacent villages located in south China. The levels and composition patterns varied significantly between workshop and home dust. BDE209 showed much higher (p < 0.01) concentrations in workshop dust versus home dust, while relatively comparable levels were found for OPEs and HBCDs. Principal component analysis revealed that OPEs and PBDEs were mainly related to home and workshop dust, respectively. Results strongly indicated that e-waste dismantling activities still contribute to a high burden of BDE209 to surrounding residents, whilst the sources of OPEs may also originated from household products, especially for TCEP. The estimated daily intakes (EDIs) via dust ingestion and dermal absorption for occupational worker and nearby toddlers were below available reference dose (RfD) values even at worst case scenario. This study highlights the significance of deca-BDEs rather than alternative OPEs in e-waste generated in China, which could provide scientific suggestions for policy formulation.
Asunto(s)
Contaminación del Aire Interior , Residuos Electrónicos , Retardadores de Llama , Contaminación del Aire Interior/análisis , China , Polvo/análisis , Residuos Electrónicos/análisis , Exposición a Riesgos Ambientales/análisis , Monitoreo del Ambiente , Retardadores de Llama/análisis , Éteres Difenilos Halogenados/análisis , Humanos , Organofosfatos/análisisRESUMEN
Dissolved organic matter (DOM), which exists widely in the environment, coming from different sources, may greatly affect the adsorption of antibiotics. However, the adsorption mechanisms of antibiotics in a sandy soil and the effects of DOM from different sources on the adsorption remain poorly understood. This study systematically investigated the adsorption characteristics of norfloxacin (NOR) onto a sandy soil obtained from the banks of Xi'an in Yellow River and in the presence of three DOM including HDOM (commercially available humic acids), LDOM (derived from fallen leaves) and MDOM (derived from cattle manure). Elemental analysis, UV-vis spectroscopy, 3D-EEM, XPS, TOC, SEM, and FTIR were used to analyze the adsorption mechanism. It was found that all the DOM sources we used could reduce the adsorption of NOR on sandy soil and prolong the reaction time to reach adsorption equilibrium. The decreasing adsorption capacities of NOR by the three types of DOM (10 mg/L) followed the order as: HDOM < LDOM < MDOM, which was related to their aromaticity, polarity and hydrophobicity. These adsorption processes of NOR on sandy soil in the presence of DOM were well fitted by Double-chamber first-order kinetics, Linear model and Freundlich models. Besides, the adsorption reaction was endothermic and spontaneous. Adsorption competition of DOM molecules with NOR, or formation of DOM-NOR complexes in solution resulted in a decrease of sandy soil adsorption capacity. Correspondingly, co-adsorption and cumulative adsorption were also considered to be the key processes that determined NOR adsorption towards sandy soil after adding DOM. Moreover, the adsorption of NOR onto sandy soil exhibited strong pH-dependent characteristic and NOR might be more easily leached from sandy soil in the aquifer at an alkaline pH. High-ion strength suppressed the adsorption. These results would help to understand the fate and risk of NOR under the action of different DOM.
Asunto(s)
Norfloxacino , Arena , Adsorción , Animales , Antibacterianos , Bovinos , China , Materia Orgánica Disuelta , Sustancias Húmicas , Estiércol , Ríos , SueloRESUMEN
In this study, pristine biochar (BC), ball milling biochar (MBC), Fe3O4 modified BC (Fe3O4@BC), and Fe3O4 modified MBC (Fe3O4@MBC) were prepared to compare the Bisphenol A (BPA) removal efficiency by activating persulfate (PDS). All catalysts exhibited excellent degradation rather than adsorption in the PDS system, and Fe3O4@MBC800 had the best BPA removal efficiency, with 96.73% degradation and negligible 1.43% adsorption due to the synergistic effect between MBC800 and Fe3O4 particles. Radical quenching experiments and electron paramagnetic resonance analysis indicated radical pathways, namely, SO4â- and âOH, O2â-, and non-radical pathway (1O2) involving BPA degradation. The abundant oxygen-containing groups, increased graphitization and mesopores of MBC800, and Fe3+/Fe2+ conversion of Fe3O4 particles facilitated PDS activation to produce reactive oxygen species. In addition, the superior electrochemical performance accelerated the electron transfer between the catalyst and PDS, promoting BPA degradation in the Fe3O4@MBC800/PDS system. More importantly, Fe3O4@MBC800 is resistant to environmental interference, including pH, anions, cations, and humic acid, and has good catalytic reusability and stability, which fulfills the requirements of engineering applications. Therefore, Fe3O4 loaded on ball-milled biochar provides a convenient strategy for preparing environmentally friendly, economical, and efficient carbon-based catalysts to remove organic contaminants.
Asunto(s)
Contaminantes Químicos del Agua , Compuestos de Bencidrilo/análisis , Carbón Orgánico , Fenoles , Contaminantes Químicos del Agua/análisisRESUMEN
Aromatic moieties of biochar are considered as key components for immobilizing hydrophobic organic contaminants in the environment. However, the relative importance of different aromatic moieties such as low-/high-condensation components in sorption has not been comprehensively investigated. In this study, biochar was produced from flue-cured tobacco straw (TB) and pine wood sawdust (WB) at various pyrolysis temperatures (200-600 °C). Aromatic moieties were characterized via elemental analysis, Fourier transform infrared spectroscopy, Raman spectroscopy, and benzene polycarboxylic acid molecular markers (BPCAs). The significance of different aromatic moieties in the sorption of phenanthrene (PHE) and bisphenol A (BPA) was assessed based on the individual BPCA patterns. The results indicated that aromaticity and aromatic moiety contents increased with increasing pyrolysis temperature. Biochar at 200 °C produced lower mellitic acid (B6CA) contents (18.7-27.9%) than the others. When the pyrolysis temperature was increased to 600 °C, the B6CA contents representing high-condensation aromatic moieties accounted for 55.4-60.9% of all the aromatic moieties. The unitary linear regressions between the individual BPCA distribution patterns and the n values and log Kd suggested that the high-condensation aromatic moieties played a more significant role than the low-condensation aromatic moieties (represented by B3CA-B5CA) in facilitating sorption nonlinearity (for PHE and BPA) and sorption capacity (for PHE). The elevated sorption of PHE can be attributed to the increased specific surface area and hydrophobicity of the newly formed aromatic moieties. Hydrogen bonds and π-π electron-donor-acceptor were the main mechanisms of BPA sorption. Because the WB biochar contained more aromatic moieties and more O-containing groups on the surface of the TB biochar, the WB exhibited a higher sorption for PHE; however, slightly elevated sorption was observed on the TB for BPA. This research may provide a new perspective in understanding the behavior of biochar aromatic moieties in sorption of organic contaminants.
Asunto(s)
Carbón Orgánico , Madera , Adsorción , Carbón Orgánico/química , Temperatura , Madera/químicaRESUMEN
Biochar inevitably goes through long-term aging under biotic and abiotic processes in the environment, which results in various changes in its physicochemical properties. However, the traditional characterization methods based on particle separation cannot effectively monitor biochar in complex matrixes. Molecular markers, especially benzene polycarboxylic acids (BPCAs), can be used to directly identify the source and properties of biochar. In this study, biochars were prepared using corn straw (CS) and pinewood (PW) and were oxidized with HNO3/H2SO4 to simulate the aging processes. Molecular markers of lignin-derived phenols showed that PW has more vanillyl unit and thus more stable than CS. The overall BPCAs content and the relative content of mellitic acid (B6CA) both increased with pyrolysis temperature, indicating increased aromatic condensation/aromaticity. The pristine CS biochar has a higher BPCAs content compared to PW biochar. HNO3/H2SO4 treatment greatly decreased the lignin components and more vanillyl and cinnamyl units were removed from CS biochar than PW biochar. In addition, BPCAs contents decreased by 41-60 mg/g for CS biochar, while increased by 86-133 mg/g for PW biochar after HNO3/H2SO4 oxidation. This is owing to the release of the condensed aromatic structures in CS biochars, but the concentration of the condensed aromatic structures in PW biochars after oxidation. These results showed that PW biochars are more stable than CS biochars. The application of the molecular markers can help understanding the dynamic change of biochar in the environment.
Asunto(s)
Carbón Orgánico , Lignina , Benceno/química , Ácidos Carboxílicos , Carbón Orgánico/química , Fenoles , PirólisisRESUMEN
Microplastics are ubiquitous in all environments and exert toxic effects in various organisms. However, the neurotoxicity and underlying mechanisms of long-term exposure to MPs aged under UV radiation remain largely unclear. In this study, Caenorhabditis elegans was treated with 0.1-100 µg/L virgin and aged polystyrene microplastics (PS-MPs) for 10 d, with locomotion behavior, neuronal development, neurotransmitter content, and neurotransmission-related to gene expression as endpoints. Using locomotion behavior as an endpoint, chronic exposure to aged PS-MPs at low concentrations (1 µg/L) caused more severe neurotoxicity than that to virgin PS-MPs. In transgenic nematodes, exposure to 10-100 µg/L aged PS-MPs significantly influenced the fluorescence intensity and percentage of worms with neurodegeneration of dopaminergic, glutamatergic, and serotonergic neurons compared with control. Further investigations showed that the content of glutamate, serotonin, and dopamine was signiï¬cantly influenced in nematodes chronically exposed to 100 µg/L of aged PS-MPs. Similarly, neurotransmission-related gene (e.g., eat-4, dat-1, and tph-1) expression was also altered in nematodes. These results indicate that aged PS-MPs exert neurotoxicity owing to their effects on dopamine, glutamate, and serotonin neurotransmission. This study provides insights into the underlying mechanisms and potential risks of PS-MPs after UV radiation.
Asunto(s)
Microplásticos , Contaminantes Químicos del Agua , Animales , Caenorhabditis elegans/genética , Dopamina , Ácido Glutámico , Plásticos , Poliestirenos , Serotonina , Transmisión Sináptica , Rayos Ultravioleta , Contaminantes Químicos del Agua/toxicidadRESUMEN
Condensed organic matters (COM) with black carbon-like structures are considered as long-term carbon sinks because of their high stability. It is difficult to distinguish COM from general organic matter by conventional chemical analysis, thus the contribution by and interaction mechanisms of organo-mineral complexes in COM stabilization are unclear and generally neglected. Molecular markers related to black carbon-like structures, such as benzene polycarboxylic acids (BPCAs), are promising tools for the qualitative and quantitative analysis of COM. In this study, one natural soil and two cultivated soils with 25 y- or 55 y-tillage activities were collected and the distribution characteristics of BPCAs were detected. All the investigated soils showed similar BPCA distribution pattern, and over 60% of BPCAs were detected in clay fraction. The extractable BPCA contents were substantially increased after mineral removal. The ratios of BPCA contents before and after mineral removal indicate the extent of COM-mineral particle interactions, and our results suggested that up to 73% COM were protected by mineral particles, and more stronger interactions were noted on clay than on silt. The initial cultivation dramatically decreased COM-clay interactions, and this interaction was recovered only slowly after 55-y cultivation. Kaolinite and muscovite are important for COM protection. But a possible negative correlation between BPCAs and reactive iron oxides of the cultivated soils suggested that iron may promote COM degradation when disturbed by tillage activities. This study provided a new angle to study the stabilization of COM and emphasized the importance of organo-mineral complexes for COM stabilization.
Asunto(s)
Benceno , Modelos Químicos , Suelo , Ácidos Carboxílicos , Minerales , HollínRESUMEN
The physicochemical properties of biochar determined its sorption of organic contaminations, and the environmental aging process changed the biochar properties. However, the correlation between biochar heterogeneous properties and their sorption characteristics is unclear. In this study, peanut shell biochars were produced at 200-700⯰C, and HNO3/H2SO4 was used to oxidize 400⯰C biochar for 2-10â¯h to simulate the enhanced aging process of biochar in the environment. Benzene polycarboxylic acid (BPCA) molecular markers, and bulk characterization were analyzed to describe biochar physicochemical properties and to further predict the sorption characteristics to bisphenol A (BPA). For pristine biochars, the mellitic acid/BPCAs (B6CA/BPCAs) increased with the raise of pyrolysis temperature and the H/C atomic ratio was positively correlated with benzenepentacarboxylic acid/B6CA (B5CA/B6CA) (Pâ¯<â¯0.01), which indicated the increased aromatic condensation. After HNO3/H2SO4 treatment, the aromaticity (H/C ratio) decreased while the highly condensed components in biochars were enriched (increased B6CA/BPCAs values). Multiple regression models were adopted to establish a quantitative relationship between biochar heterogeneous properties and their sorption of BPA. Both nonlinearity coefficient N values (N = 0.08 + 0.103 B5CA/B6CA + 0.721 (O + N)/C, R2â¯=â¯0.985) and single-point sorption coefficients log Kd (log Kd = 1.236 + 0.006 BPCAs + 1.449 (O + N)/C, R2â¯=â¯0.936) could be estimated combining molecular markers and polarity parameters for biochars.
Asunto(s)
Benceno/química , Carbón Orgánico/química , Modelos Químicos , Adsorción , Benceno/análisis , Compuestos de Bencidrilo/química , Ácidos Carboxílicos/química , Fenoles/química , TemperaturaRESUMEN
The formation of organo-mineral complexes is essential in organic matter (OM) stabilization. However, limited studies have been conducted to systematically examine the mineral influence on the decomposition of plant residuals at a molecular level. In this study, pine needles and chestnut leaves were mixed with kaolinite at the weight ratio of 5:1. The controls were plant tissues without kaolinite. All the samples were incubated in the laboratory for one year. Molecular markers, including lignin-derived phenols (e.g. Vanilly units, syringyl units and cinnamyl units) and solvent-extractable lipids (e.g. n-alkanoic acid, n-alkanols and n-alkanes), were analyzed. The concentrations of lignin-derived phenols and lipid compounds were higher in the presence of kaolinite than without kaolinite. Lower degradation indexes, such as (Ad/Al)V (ratio of vanillic acid to vanillin) and CPI (carbon preference index of n-alkanoic acid and n-alkanes), were found in the kaolinite system. These results indicate that kaolinite reduced the OM decomposition. The addition of kaolinite also stabilized some carbohydrates from plants. Furthermore, the degradation of OM led to the generation of persistent free radicals, indicated by electron paramagnetic resonance (EPR) signals. The EPR signals were higher with than without kaolinite. We hypothesize that the adsorption of semiquinone or quinone radicals on kaolinite may limit their reaction with other OM moieties and thus extended their lifetimes. In addition to embedding OM in soil aggregates, our results provide direct evidence of another mineral protective mechanism of soil OM.
RESUMEN
Understanding formation of organo-mineral association is crucial for soil organic matter (SOM) stabilization. To remove reactive minerals from un-disturbed natural soil (NS) and two cultivated soils (dry-farming soil, TD, and terrace paddy soil, TP), a 10% HF/1M HCl treatment was applied. The mineral protection of different molecular SOM structures before and after cultivation was compared by using markers for lipid and lignin. The removal of reactive mineral increased the lipid extractability in TD and NS similarly, indicating that the cultivation did not reduce the mineral protection; this is attributable to fertilizer application and amorphous Fe oxide enrichment. In TP, the extent of lipid protection was lower than in TD, demonstrating that the protection depends on the type of cultivation. In contrast to lipids, lignin-derived phenols decreased over 80% after acid treatment. Furthermore, the ratios of acid to aldehyde in vanillyl ((Ad/Al)V) of TD and TP were much higher than in NS, indicating an increased oxidation of lignin in cultivated soils. During acid treatment, two distinct layers of soil particles were identified: an organic matter (OM)-enriched layer (LOM), and a non-reactive mineral-enriched layer (LNR) with hardly detectable OC content. However, up to 50% of lipids were detected in LNR, indicating that lipids did not selectively interact with reactive mineral particles. In TD and TP, (Ad/Al)V values were higher in LOM than in LNR, indicating a strong interaction of oxidized lignin in LOM. Therefore, the protection of lignin, especially highly oxidized lignin, can depend more on reactive minerals than lipid. Promoting the formation of organo-mineral complexes is the primary strategy for soil management, especially for highly oxidized OM.