RESUMEN
BACKGROUND: The endothelial-to-hematopoietic transition (EHT) process during definitive hematopoiesis is highly conserved in vertebrates. Stage-specific expression of transposable elements (TEs) has been detected during zebrafish EHT and may promote hematopoietic stem cell (HSC) formation by activating inflammatory signaling. However, little is known about how TEs contribute to the EHT process in human and mouse. RESULTS: We reconstructed the single-cell EHT trajectories of human and mouse and resolved the dynamic expression patterns of TEs during EHT. Most TEs presented a transient co-upregulation pattern along the conserved EHT trajectories, coinciding with the temporal relaxation of epigenetic silencing systems. TE products can be sensed by multiple pattern recognition receptors, triggering inflammatory signaling to facilitate HSC emergence. Interestingly, we observed that hypoxia-related signals were enriched in cells with higher TE expression. Furthermore, we constructed the hematopoietic cis-regulatory network of accessible TEs and identified potential TE-derived enhancers that may boost the expression of specific EHT marker genes. CONCLUSIONS: Our study provides a systematic vision of how TEs are dynamically controlled to promote the hematopoietic fate decisions through transcriptional and cis-regulatory networks, and pre-train the immunity of nascent HSCs.
Asunto(s)
Elementos Transponibles de ADN , Hematopoyesis , Células Madre Hematopoyéticas , Análisis de la Célula Individual , Animales , Elementos Transponibles de ADN/genética , Análisis de la Célula Individual/métodos , Ratones , Hematopoyesis/genética , Humanos , Células Madre Hematopoyéticas/metabolismo , Células Endoteliales/metabolismoRESUMEN
Many pathogenic bacteria use type IV secretion systems (T4SSs) to deliver effectors (T4SEs) into the cytoplasm of eukaryotic cells, causing diseases. The identification of effectors is a crucial step in understanding the mechanisms of bacterial pathogenicity, but this remains a major challenge. In this study, we used the full-length embedding features generated by six pre-trained protein language models to train classifiers predicting T4SEs and compared their performance. We integrated three modules into a model called T4SEpp. The first module searched for full-length homologs of known T4SEs, signal sequences, and effector domains; the second module fine-tuned a machine learning model using data for a signal sequence feature; and the third module used the three best-performing pre-trained protein language models. T4SEpp outperformed other state-of-the-art (SOTA) software tools, achieving â¼0.98 accuracy at a high specificity of â¼0.99, based on the assessment of an independent validation dataset. T4SEpp predicted 13 T4SEs from Helicobacter pylori, including the well-known CagA and 12 other potential ones, among which eleven could potentially interact with human proteins. This suggests that these potential T4SEs may be associated with the pathogenicity of H. pylori. Overall, T4SEpp provides a better solution to assist in the identification of bacterial T4SEs and facilitates studies of bacterial pathogenicity. T4SEpp is freely accessible at https://bis.zju.edu.cn/T4SEpp.
RESUMEN
The plant genome produces an extremely large collection of long noncoding RNAs (lncRNAs) that are generally expressed in a context-specific manner and have pivotal roles in regulation of diverse biological processes. Here, we mapped the transcriptional heterogeneity of lncRNAs and their associated gene regulatory networks at single-cell resolution. We generated a comprehensive cell atlas at the whole-organism level by integrative analysis of 28 published single-cell RNA sequencing (scRNA-seq) datasets from juvenile Arabidopsis seedlings. We then provided an in-depth analysis of cell-type-related lncRNA signatures that show expression patterns consistent with canonical protein-coding gene markers. We further demonstrated that the cell-type-specific expression of lncRNAs largely explains their tissue specificity. In addition, we predicted gene regulatory networks on the basis of motif enrichment and co-expression analysis of lncRNAs and mRNAs, and we identified putative transcription factors orchestrating cell-type-specific expression of lncRNAs. The analysis results are available at the single-cell-based plant lncRNA atlas database (scPLAD; https://biobigdata.nju.edu.cn/scPLAD/). Overall, this work demonstrates the power of integrative single-cell data analysis applied to plant lncRNA biology and provides fundamental insights into lncRNA expression specificity and associated gene regulation.
Asunto(s)
Arabidopsis , ARN Largo no Codificante , Redes Reguladoras de Genes , ARN Largo no Codificante/genética , Arabidopsis/genética , Análisis de Expresión Génica de una Sola Célula , Regulación de la Expresión GénicaRESUMEN
Human aging is a natural and inevitable biological process that leads to an increased risk of aging-related diseases. Developing anti-aging therapies for aging-related diseases requires a comprehensive understanding of the mechanisms and effects of aging and longevity from a multi-modal and multi-faceted perspective. However, most of the relevant knowledge is scattered in the biomedical literature, the volume of which reached 36 million in PubMed. Here, we presented HALD, a text mining-based human aging and longevity dataset of the biomedical knowledge graph from all published literature related to human aging and longevity in PubMed. HALD integrated multiple state-of-the-art natural language processing (NLP) techniques to improve the accuracy and coverage of the knowledge graph for precision gerontology and geroscience analyses. Up to September 2023, HALD had contained 12,227 entities in 10 types (gene, RNA, protein, carbohydrate, lipid, peptide, pharmaceutical preparations, toxin, mutation, and disease), 115,522 relations, 1,855 aging biomarkers, and 525 longevity biomarkers from 339,918 biomedical articles in PubMed. HALD is available at https://bis.zju.edu.cn/hald .
Asunto(s)
Envejecimiento , Geriatría , Longevidad , Humanos , Biomarcadores , Gerociencia , Reconocimiento de Normas Patrones AutomatizadasRESUMEN
Cornus wilsoniana W. is a woody oil plant with high oil content and strong hypolipidemic effects, making it a valuable species for medicinal, landscaping, and ecological purposes in China. To advance genetic research on this species, we employed PacBio together with Hi-C data to create a draft genome assembly for C. wilsoniana. Based on an 11-chromosome anchored chromosome-level assembly, the estimated genome size was determined to be 843.51 Mb. The N50 contig size and N50 scaffold size were calculated to be 4.49 and 78.00 Mb, respectively. Furthermore, 30 474 protein-coding genes were annotated. Comparative genomics analysis revealed that C. wilsoniana diverged from its closest species ~12.46 million years ago (Mya). Furthermore, the divergence between Cornaceae and Nyssaceae occurred >62.22 Mya. We also found evidence of whole-genome duplication events and whole-genome triplication γ, occurring at ~44.90 and 115.86 Mya. We further inferred the origins of chromosomes, which sheds light on the complex evolutionary history of the karyotype of C. wilsoniana. Through transcriptional and metabolic analysis, we identified two FAD2 homologous genes that may play a crucial role in controlling the oleic to linoleic acid ratio. We further investigated the correlation between metabolites and genes and identified 33 MADS-TF homologous genes that may affect flower morphology in C. wilsoniana. Overall, this study lays the groundwork for future research aimed at identifying the genetic basis of crucial traits in C. wilsoniana.
RESUMEN
A gene family refers to a group of genes that share a common ancestry and encode proteins or RNA molecules with similar functions or structural features. Gene families play a crucial role in determining the traits of plants and can be utilized to develop new crop varieties. Therefore, a comprehensive database of gene family is significant for gaining deep insight into crops. To address this need, we have developed CropGF (https://bis.zju.edu.cn/cropgf), a comprehensive visual platform that encompasses six important crops (rice, wheat, maize, barley, sorghum and foxtail millet) and one model plant (Arabidopsis), as well as genomics, transcriptomics and proteomics data for gene family mining and analysis, covering a total of 314 611 genes and 4399 types of domains. CropGF provides a versatile search system that allows for the identification of gene families and their members in a single crop or multiple crops. Users can customize their search based on gene family domains and/or homology using keywords or BLAST. To enhance usability, we have collected the corresponding ID information from various public databases for both genes and domains. Furthermore, CropGF comprises numerous downstream analysis modules, such as ka/ks analysis, phylogenetic tree construction, subcellular localization analysis and more. These visually-displayed modules provide intuitive insights into gene expression patterns, gene family expansion and functional relationships across different molecular levels and different species. We believe that CropGF will be a valuable resource for deep mining and analysis in future studies of crop gene families. Database URL https://bis.zju.edu.cn/cropgf.
Asunto(s)
Perfilación de la Expresión Génica , Setaria (Planta) , Filogenia , Genómica , Setaria (Planta)/genética , Setaria (Planta)/metabolismo , Zea mays/genética , Proteínas de Plantas/genética , Proteínas de Plantas/metabolismo , Regulación de la Expresión Génica de las PlantasRESUMEN
Crop plant breeding involves selecting and developing new plant varieties with desirable traits such as increased yield, improved disease resistance, and enhanced nutritional value. With the development of high-throughput technologies, such as genomics, transcriptomics, and metabolomics, crop breeding has entered a new era. However, to effectively use these technologies, integration of multi-omics data from different databases is required. Integration of omics data provides a comprehensive understanding of the biological processes underlying plant traits and their interactions. This review highlights the importance of integrating omics databases in crop plant breeding, discusses available omics data and databases, describes integration challenges, and highlights recent developments and potential benefits. Taken together, the integration of omics databases is a critical step towards enhancing crop plant breeding and improving global food security.
Asunto(s)
Genómica , Fitomejoramiento , Plantas , Bases de Datos Factuales , FenotipoRESUMEN
Climate change and the COVID-19 pandemic have disrupted the food supply chain across the globe and adversely affected food security. Early estimation of staple crops can assist relevant government agencies to take timely actions for ensuring food security. Reliable crop type maps can play an essential role in monitoring crops, estimating yields, and maintaining smooth food supplies. However, these maps are not available for developing countries until crops have matured and are about to be harvested. The use of remote sensing for accurate crop-type mapping in the first few weeks of sowing remains challenging. Smallholder farming systems and diverse crop types further complicate the challenge. For this study, a ground-based survey is carried out to map fields by recording the coordinates and planted crops in respective fields. The time-series images of the mapped fields are acquired from the Sentinel-2 satellite. A deep learning-based long short-term memory network is used for the accurate mapping of crops at an early growth stage. Results show that staple crops, including rice, wheat, and sugarcane, are classified with 93.77% accuracy as early as the first four weeks of sowing. The proposed method can be applied on a large scale to effectively map crop types for smallholder farms at an early stage, allowing the authorities to plan a seamless availability of food.
Asunto(s)
COVID-19 , Aprendizaje Profundo , Humanos , Granjas , Pandemias , Agricultura , Productos AgrícolasRESUMEN
Ribonucleic acid editing (RE) is a post-transcriptional process that altered the genetics of RNA which provide the extra level of gene expression through insertion, deletions, and substitutions. In animals, it converts nucleotide residues C-U. Similarly in plants, the role of RNA editing sites (RES) in rice under alkaline stress is not fully studied. Rice is a staple food for most of the world population. Alkaline stress cause reduction in yield. Here, we explored the effect of alkaline stress on RES in the whole mRNA from rice chloroplast and mitochondria. Ribonucleic acid editing sites in both genomes (3336 RESs) including chloroplast (345 RESs) and mitochondria (2991 RESs) with average RES efficiency â¼55% were predicted. Our findings showed that majority of editing events found in non-synonymous codon changes and change trend in amino acids was hydrophobic. Four types of RNA editing A-G (A-I), C-T (C-U), G-A, and T-C were identified in treated and untreated samples. Overall, RNA editing efficiency was increased in the treated samples. Analysis of Gene Ontology revealed that mapped genes were engaged in many biological functions and molecular processes. We also checked the expression of pentatricopeptide repeat (PPR), organelle zinc-finger (OZI), and multiple organellar RNA editing factors/RNA editing factor interacting proteins genes in control and treatment, results revealed upregulation of PPR and OZ1 genes in treated samples. This induction showed the role of these genes in RNA editing. The current findings report that RNA editing increased under alkaline stress which may contribute in adaptation for rice by changing amino acids in edited genes (88 genes). These findings will provide basis for identification of RES in other crops and also will be useful in alkaline tolerance development in rice.
RESUMEN
Nicotiana L. is a genus rich in polyploidy, which represents an ideal natural system for investigating speciation, biodiversity, and phytogeography. Despite a wealth of phylogenetic work on this genus, a robust evolutionary framework with a dated molecular phylogeny for the genus is still lacking. In this study, the 19 complete chloroplast genomes of Nicotiana species were assembled, and five published chloroplast genomes of Nicotiana were retrieved for comparative analyses. The results showed that the 24 chloroplast genomes of Nicotiana, ranging from 155,327 bp (N. paniculata) to 156,142 bp (N. heterantha) in size, exhibited typical quadripartite structure. The chloroplast genomes were rather conserved in genome structure, GC content, RNA editing sites, and gene content and order. The higher GC content observed in the IR regions could be a result of the presence of abundant rRNA and tRNA genes, which contained a relatively higher GC content. A total of seven hypervariable regions, as new molecular markers for phylogenetic analysis, were uncovered. Based on 78 protein-coding genes, we constructed a well-supported phylogenetic tree, which was largely in agreement with previous studies, except for a slight conflict in several sections. Chloroplast phylogenetic results indicated that the progenitors of diploid N. sylvestris, N. knightiana, and the common ancestor of N. sylvestris and N. glauca might have donated the maternal genomes of allopolyploid N. tabacum, N. rustica, and section Repandae, respectively. Meanwhile, the diploid section Noctiflorae lineages (N. glauca) acted as the most likely maternal progenitor of section Suaveolentes. Molecular dating results show that the polyploid events range considerably in ~0.12 million (section Nicotiana) to ~5.77 million (section Repandae) years ago. The younger polyploids (N. tabacum and N. rustica) were estimated to have arisen ~0.120 and ~0.186 Mya, respectively. The older polyploids (section Repandae and Suaveolentes) were considered to have originated from a single polyploid event at ~5.77 and ~4.49 Mya, respectively. In summary, the comparative analysis of chloroplast genomes of Nicotiana species has not only revealed a series of new insights into the genetic variation and phylogenetic relationships in Nicotiana but also provided rich genetic resources for speciation and biodiversity research in the future.
RESUMEN
Globally, rice is being consumed as a main staple food and faces different kinds of biotic and abiotic stresses such drought, salinity, and pest attacks. Through the cytokinin signaling, Type-B authentic response regulators (ARR-Bs) respond positively towards the environmental stimuli. ARR-Bs are involved in abiotic stress tolerance and plant development but their molecular mechanisms in fragrant rice are still not fully explored. The current study showed the genome-wide characterization of OsARR-B genes under alkaline salt stress. Results showed that in total, 24 OsARR-B genes were found and divided into four subgroups on the basis of a phylogenetic analysis. These genes were located on all rice chromosomes except 8 and 10. Analysis of gene duplications, gene structure, cis-elements, protein-protein interactions, and miRNA were performed. Gene ontology analysis showed that OsARR-B genes are involved in plant development through the regulation of molecular functions, biological processes, and cellular components. Furthermore, 117 and 192 RNA editing sites were detected in chloroplast and mitochondrial genes, respectively, encoding proteins of OsARR-B. In chloroplast and mitochondrial genes, six and nine types of amino acid changes, respectively, were caused by RNA editing, showing that RNA editing has a role in the alkaline salt stress tolerance in fragrant rice. We also used a comparative transcriptome approach to study the gene expression changes in alkaline tolerant and susceptible genotypes. Under alkaline salt stress, OsARR-B5, OsARR-B7, OsARR-B9, OsARR-B10, OsARR-B16, OsARR-B22, and OsARR-B23 showed higher transcript levels in alkaline salt tolerant genotypes as compared to susceptible ones. Quantitative RT-PCR showed upregulation of gene expression in the alkaline tolerant genotypes under alkaline stress. Our study explored the gene expression profiling and RESs of two rice contrasting genotypes, which will help to understand the molecular mechanisms of alkaline salt tolerance in fragrant rice.
Asunto(s)
Oryza , Perfilación de la Expresión Génica , Regulación de la Expresión Génica de las Plantas/genética , Genes Reguladores , Oryza/metabolismo , Filogenia , Proteínas de Plantas/genética , Proteínas de Plantas/metabolismo , Estrés Salino/genética , Tolerancia a la Sal/genética , Estrés Fisiológico/genéticaRESUMEN
Plant transcriptomes encompass a large number of functional non-coding RNAs (ncRNAs), only some of which have protein-coding capacity. Since their initial discovery, ncRNAs have been classified into two broad categories based on their biogenesis and mechanisms of action, housekeeping ncRNAs and regulatory ncRNAs. With advances in RNA sequencing technology and computational methods, bioinformatics resources continue to emerge and update rapidly, including workflow for in silico ncRNA analysis, up-to-date platforms, databases, and tools dedicated to ncRNA identification and functional annotation. In this review, we aim to describe the biogenesis, biological functions, and interactions with DNA, RNA, protein, and microorganism of five major regulatory ncRNAs (miRNA, siRNA, tsRNA, circRNA, lncRNA) in plants. Then, we systematically summarize tools for analysis and prediction of plant ncRNAs, as well as databases. Furthermore, we discuss the silico analysis process of these ncRNAs and present a protocol for step-by-step computational analysis of ncRNAs. In general, this review will help researchers better understand the world of ncRNAs at multiple levels.
Asunto(s)
ARN Largo no Codificante , ARN no Traducido , Biología Computacional/métodos , Plantas/genética , Plantas/metabolismo , ARN Largo no Codificante/genética , ARN no Traducido/genética , ARN no Traducido/metabolismo , Análisis de Secuencia de ARNRESUMEN
The genus Brassica contains several economically important crops, including rapeseed (Brassica napus, 2n = 38, AACC), the second largest source of seed oil and protein meal worldwide. However, research in rapeseed is hampered because it is complicated and time-consuming for researchers to access different types of expression data. We therefore developed the Brassica Expression Database (BrassicaEDB) for the research community. In the current BrassicaEDB, we only focused on the transcriptome level in rapeseed. We conducted RNA sequencing (RNA-Seq) of 103 tissues from rapeseed cultivar ZhongShuang11 (ZS11) at seven developmental stages (seed germination, seedling, bolting, initial flowering, full-bloom, podding, and maturation). We determined the expression patterns of 101,040 genes via FPKM analysis and displayed the results using the eFP browser. We also analyzed transcriptome data for rapeseed from 70 BioProjects in the SRA database and obtained three types of expression level data (FPKM, TPM, and read counts). We used this information to develop the BrassicaEDB, including "eFP", "Treatment", "Coexpression", and "SRA Project" modules based on gene expression profiles and "Gene Feature", "qPCR Primer", and "BLAST" modules based on gene sequences. The BrassicaEDB provides comprehensive gene expression profile information and a user-friendly visualization interface for rapeseed researchers. Using this database, researchers can quickly retrieve the expression level data for target genes in different tissues and in response to different treatments to elucidate gene functions and explore the biology of rapeseed at the transcriptome level.
Asunto(s)
Brassica/genética , Bases de Datos Genéticas , Regulación de la Expresión Génica de las Plantas , Perfilación de la Expresión Génica , Estadística como Asunto , Interfaz Usuario-ComputadorRESUMEN
[This corrects the article DOI: 10.1155/2014/680195.].
RESUMEN
OBJECTIVE: Radiopharmaceutical production process must adhere to current good manufacturing process (CGMP) compliance to ensure the quality of precursor, prodrug (active pharmaceutical ingredient, API), and the final drug product that meet acceptance criteria. We aimed to develop an automated system for production of CGMP grade of PET radiopharmaceuticals. METHODS: The hardware and software of the automated synthesizer that fit in the hot cell under cGMP requirement were developed. Examples of production yield and purity for (68)Ga-DOTATATE and (18)F-FDG at CGMP facility were optimized. Analytical assays and acceptance criteria for cGMP grade of (68)Ga-DOTATATE and (18)F-FDG were established. RESULTS: CGMP facility for the production of PET radiopharmaceuticals has been established. Radio-TLC and HPLC analyses of (68)Ga-DOTATATE and (18)F-FDG showed that the radiochemical purity was 92% and 96%, respectively. The products were sterile and pyrogenic-free. CONCLUSION: CGMP compliance of radiopharmaceuticals has been reviewed. (68)Ga-DOTATATE and (18)F-FDG were synthesized with high radiochemical yield under CGMP process.
Asunto(s)
Fluorodesoxiglucosa F18/síntesis química , Radioisótopos de Galio/química , Radioquímica/métodos , Radiofármacos/síntesis química , Automatización , Humanos , Tomografía de Emisión de Positrones , RadiometríaRESUMEN
Bone extraction and division can enhance the accuracy of diagnoses based on whole-body bone SPECT data. This study developed a method for using conventional SPECT for automatic recognition of the vertebral column. A novel feature of the proposed approach is a novel "bone graph" image description method that represents the connectivity between these image regions to facilitate manipulation of morphological relationships in the skeleton before surgery. By tracking the paths shown on the bone graph, skeletal structures can be identified by performing morphological operations. The performance of the method was evaluated quantitatively and qualitatively by two experienced nuclear medicine physicians. Datasets for whole-body bone SPECT scans in 46 lung cancer patients with bone metastasis were obtained with Tc-99m MDP. The algorithm successfully segmented vertebrae in the thoracolumbar spine. The quantitative assessment shows that the segmentation method achieved an average TP, FP, and FN rates of 95.1%, 9.1%, and 4.9%. The qualitative evaluation shows an average acceptance rate of 83%, where the data for the acceptable and unacceptable groups had a Cronbach's alpha value of 0.718, which indicated reasonable internal consistency and reliability.
Asunto(s)
Huesos/diagnóstico por imagen , Columna Vertebral/diagnóstico por imagen , Tomografía Computarizada de Emisión de Fotón Único/métodos , Algoritmos , Neoplasias Óseas/diagnóstico por imagen , Neoplasias Óseas/secundario , Biología Computacional , Humanos , Neoplasias Pulmonares/diagnóstico por imagen , Interpretación de Imagen Radiográfica Asistida por Computador/métodos , Radiofármacos , Medronato de Tecnecio Tc 99m , Tomografía Computarizada de Emisión de Fotón Único/estadística & datos numéricos , Imagen de Cuerpo EnteroRESUMEN
INTRODUCTION: Lately, 6-[(18)F]fluoro-L: -DOPA (FDOPA) has found increase in its clinical demand for whole-body positron emission tomography (PET) scans, and two key issues in fulfilling this demand are the difficulties in producing FDOPA under the recently imposed PET drug good manufacturing practice (GMP) regulations and in providing it in the quality meeting the terms of major compendia. This paper describes the approaches for the GMP production of FDOPA and for the product testing to meet the standard of United States Pharmacopeia (USP) "Fluorodopa F 18 Injection." METHODS: FDOPA was produced by the carrier-added electrophilic aromatic substitution reaction in the facility complying Pharmaceutical Inspection Cooperation Scheme clean room standard. The special aseptic handling technique was applied to minimize the bioburden. The product quality control followed all testing items and procedures, including three different settings of HPLC. RESULTS: The process yielded FDOPA average 2.60 ± 0.26 GBq (N = 22) in every batch. All qualities of the product were within the specifications described in the USP "Fluorodopa F 18 Injection." The entire production was audited by the government authority and certified to comply with the latest PET drug GMP regulation. CONCLUSION: Our efforts in producing FDOPA following all aspects of GMP requirements have resulted in a product with the USP quality and certified as GMP complied. The routine production yields enough doses for three to four whole-body scans in each batch. The issues discussed in the report provide good reference for producers planning in routine production for PET drugs that are not commonly produced or with complicated compendial quality control tests.
Asunto(s)
Dihidroxifenilalanina/análogos & derivados , Materiales Manufacturados/economía , Materiales Manufacturados/normas , Organizaciones sin Fines de Lucro , Dihidroxifenilalanina/economía , Dihidroxifenilalanina/normas , Contaminación de Equipos/prevención & control , Inyecciones , Microbiología , Tomografía de Emisión de Positrones , Control de Calidad , Estados UnidosRESUMEN
INTRODUCTION: "Sodium fluoride ((18)F) injection" is an isotonic NaCl solution containing [(18)F]NaF to be used as bone imaging agent. Although its NDA was approved by the US FDA in 1972, it has not been commercially available since 1975 due to mostly the popularity of (99m)Tc-MDP. Recently, advances in PET/CT technology and the often interrupted (99m)Tc supply have led to the renewed interest in the use of [(18)F]NaF to detect bone metastases in cancer patients. This report introduces an efficient, low-cost and aseptic preparation of "Sodium fluoride ((18)F) injection" for PET scan. METHOD: (18)F-Fluoride in target water from cyclotron was adsorbed onto four different forms of anion-exchange resins then desorbed by isotonic NaCl solution into the product vial. One of the resins that yielded the product at the suitable pH was used for the aseptic preparation. The components for this setup, including stopcocks, extension tubes, etc., were all single-use, individually packed and sterile. The process was done in a lead-line isolator maintained in grade A (PIC/S) aseptic condition. The quality of the obtained "Sodium fluoride ((18)F) injection" was analyzed according to its monograph in the European Pharmacopoeia (EP). RESULTS: The resin in the chloride form yielded the product of pH 6.7 and was chosen for the subsequent preparation. The radiochemical yield was quantitative. The product met all criteria specified in EP, including biological, physical and chemical specifications. CONCLUSIONS: This method is an efficient, space-saving and extremely low-cost operation that easily performed in an aseptic environment meeting GMP standard. The quality of the "Sodium fluoride ((18)F) injection" so yielded meets EP specifications. This setup provides hospital with facility meeting GMP standard a cost effective and efficient method for "Sodium fluoride ((18)F) injection" production without the need for the expensive automatic module and extra QC instrument.