RESUMEN
Background: Healthcare workers face a risk of infection during aerosol-generating procedures, such as nasal swabbing. Robot-assisted nasopharyngeal sampling aims to minimize this risk and reduce stress for healthcare providers. However, its effectiveness and safety require validation. Methods: We conducted a controlled trial with 80 subjects at two teaching hospitals and compared robot-collected vs manually-collected nasopharyngeal swabs. The primary outcomes included specimen quality and success rate of nasopharyngeal swab collection. We also recorded the pain index, duration of the collection, and psychological stress using a post-collection questionnaire. Results: During the study period, from September 23 to October 27, 2020, 40 subjects were enrolled in both the robotic and manual groups. The cycle threshold (Ct) value for nasopharyngeal specimens was statistically higher in the robotic group compared to the manual group (30.9 vs 28.0, p < 0.01). Both groups had Ct values under 35, indicating good quality specimens. In the robotic group, 3 out of 40 subjects required a second attempt at specimen collection, resulting in a success rate of 92.5 %. Further, although the pain levels were lower in the robotic group, the difference was not statistically significant (2.8 vs 3.6, p = 0.07). The manual group had a shorter sampling time, which was 29 s (201 vs 29, p < 0.05). However, when factoring in the time needed to put on personal protective equipment, the average time for the manual group increased to 251 s (201 vs 251, p < 0.05). Participants' questionnaire results show comparable psychological stress in both groups. Medical staff expressed that using a robot would reduce their psychological stress. Conclusions: We propose a safe and effective robotic technology for collecting nasopharyngeal specimens without face-to-face contact, which may reduce the stress of physicians and nurses. This technology can also be optimized for efficiency, making it useful in situations where droplet-transmitted infectious diseases are a concern.
RESUMEN
BACKGROUND: The usage of machine vision technologies for image-based analysis and inspection is increasing. With the advent of the ability to process high-dimension data instantly, the possibilities of machine vision multiply exponentially. Robots now use this technology to assist in surgery. OBJECTIVE: The aim of this study is to explore the efficacy of Surgical Navigation Robot NaoTrac (Brain Navi Biotechnology Co., Ltd.), which utilizes machine vision-inspired technology for patient registration and stereotactic external ventricular drainage (EVD) by the robotic arm. METHODS: Preoperative and postoperative computed tomography (CT) scans were acquired for each case. The surgeons planned the targets and trajectories with the preoperative CT images. The postoperative CT images were utilized in the accuracy measurements. RESULTS: All 14 cases had cerebrospinal fluid drained through the catheter. The NaoTrac placed the catheter into the frontal horn in one attempt in 13 cases and was able to drain CSF in 12 cases. Not a single case had any bleeding or intraoperative complications. The average time spent on the patient registration was 142.8 s. The mean target deviation was 1.68 mm, and the mean angular deviation was 1.99°, all within the accepted tolerance for minimal tissue damage. CONCLUSION: The results of this report demonstrate that machine vision-inspired patient registration is feasible and fast. NaoTrac has demonstrated its accuracy and safety in performing frameless catheter placement in 13 clinical cases. Other stereotactic neurosurgical operations such as stereotactic biopsy, depth electrode placement, deep brain stimulation electrode positioning, and neuroendoscopy may also be benefited from the assistance of NaoTrac.
Asunto(s)
Neurocirugia , Drenaje , Humanos , Procedimientos Neuroquirúrgicos/métodos , Proyectos Piloto , Técnicas EstereotáxicasRESUMEN
Purpose: Urinary tract infections (UTIs) are the most common infections among hospitalized patients. Cystoscopy is a minimally invasive procedure to check bladder disease, among the patients receiving procedure, approximately 10% of patients may experience UTI. In this study, a neural network model with high accuracy, sensitivity, and specificity was developed to predict the probability of UTIs caused by cystoscopic procedures. To reduce antibiotic overuse during cystoscopic procedures, the model can provide clinicians with a rapid assessment of whether patients require prophylactic antibiotics. Materials and Methods: Patients who underwent cystoscopic procedures at China Medical University Beigang Hospital from 2016 to 2019 were retrospectively reviewed. A total of 1647 patients were enrolled, and 147 cases of urinary tract infection occurred. An artificial neural network (ANN) and logistic regression analysis were used to develop the prediction models, and the two models were compared. Results: The logistic regression analysis model had an accuracy of 91%, sensitivity of 2%, and specificity of 99%, indicating that the logistic regression model predicted that most patients had a low risk of infection. The neural network model had a high accuracy of 85%, sensitivity of 80%, and specificity of 88%. Conclusions: Because the logistic regression model had low sensitivity and missed most cases of UTI, the logistic regression model is inappropriate for clinical application. The neural network model has superior predictive ability and can be considered a tool in clinical practice.
Asunto(s)
Cistoscopía , Infecciones Urinarias , Cistoscopía/efectos adversos , Humanos , Modelos Logísticos , Redes Neurales de la Computación , Estudios Retrospectivos , Infecciones Urinarias/etiologíaRESUMEN
Ultrasound (US) imaging system is widely used in robotic systems for precision positioning in clinical applications. The US calibration is critical to minimize the difference of spatial coordinates between instruments, for minimally invasive surgery (MIS) in navigation systems. In this study, we propose a dual robotic arm system that combines US imaging with one arm for path planning and monitoring and accurate positioning with the other arm for instrument placement via the preplanning procedures. A phantom with N-wire and N-wedge was designed for US calibration. The US calibration showed a mean error of 0.76 mm; the mean dual-arm calibration error is 0.31 mm. The positioning error of the system was verified with a mean error of 1.48 mm. In addition, we used two abdominal phantoms with computed tomography scan validation, with an averaged position error of 1.867 ± 0.436 mm and an orientation error of 2.190 ± 0.764°. The proposed system is aimed to perform clinical operations, such as abdominal MIS, with real-time image monitoring of the organ tissues and instrument positions, which meet the requirements for medical application.
Asunto(s)
Cirugía Asistida por Computador , Sistemas de Navegación Quirúrgica , Calibración , Humanos , Imagenología Tridimensional/métodos , Fantasmas de Imagen , Cirugía Asistida por Computador/métodos , Tomografía Computarizada por Rayos X/métodos , Ultrasonografía/métodosRESUMEN
An ultrasonic examination is a clinically universal and safe examination method, and with the development of telemedicine and precision medicine, the robotic ultrasound system (RUS) integrated with a robotic arm and ultrasound imaging system receives increasing attention. As the RUS requires precision and reproducibility, it is important to monitor the real-time calibration of the RUS during examination, especially the angle of the probe for image detection and its force on the surface. Additionally, to speed up the integration of the RUS and the current medical ultrasound system (US), the current RUSs mostly use a self-designed fixture to connect the probe to the arm. If the fixture has inconsistencies, it may cause an operating error. In order to improve its resilience, this study proposed an improved sensing method for real-time force and angle calibration. Based on multichannel pressure sensors, an inertial measurement unit (IMU), and a novel sensing structure, the ultrasonic probe and robotic arm could be simply and rapidly combined, which rendered real-time force and angle calibration at a low cost. The experimental results show that the average success rate of the downforce position identification achieved was 88.2%. The phantom experiment indicated that the method could assist the RUS in the real-time calibration of both force and angle during an examination.
Asunto(s)
Procedimientos Quirúrgicos Robotizados , Calibración , Fantasmas de Imagen , Reproducibilidad de los Resultados , UltrasonografíaRESUMEN
Blood glucose measurements help to guide insulin therapy, thus reducing disease severities, secondary complications, and related mortalities. Efforts are underway to allow diabetes patients to experience a more convenient way to measure blood glucose and consequently increase their adherence to regular self-monitoring of blood glucose (SMBG). This study demonstrated a new SMBG system that integrated all components of a glucometer via a smartphone's optical sensing module to detect the colorimetric blood strip and obtains the blood glucose concentration with calculations performed by an application install in the smartphone. To validate the accuracy and applicability of the new SMBG system regarding the ISO15197:2013 accuracy criteria and patient requirements, a clinical trial and usability survey involving participants from different age groups were conducted in collaboration with the China Medical University, where enrolled 120 diabetic patients were asked to operate the new SMBG system to measure their blood glucose concentration, and feedback was obtained from their user experience. The results showed that three different reagent system lots fulfilled the accuracy requirements with values of 97.4-97.5% , and all of the data were within zones A and B of the consensus error grid, which satisfies the ISO 15197:2013 requirement. The usability survey showed that 97.5% of the participants found the operations convenient, and 100% found the design easy for carrying. This new system could lead to improvements in blood glucose monitoring by people with diabetes, and thus, better management of the disease.
RESUMEN
Maintaining appropriate insulin levels is very important for diabetes patients. Effective monitoring of blood glucose can aid in maintaining the body's insulin level, and thus reduce disease severities, secondary complications, and related mortalities. However, existing blood glucose measurement devices are inconvenient to carry and involve complex procedures, reducing the willingness of diabetes patients to regularly measure blood glucose. We aim to provide a rapid, convenient, and portable meter for diabetes patients. We introduce an integrated blood glucose detection device (IBGDD) that has no electronic component and uses the optical sensing module of a smartphone to inspect colorimetric blood strips. To demonstrate accuracy conformance of the developed device to the ISO 15197:2013 standard for blood glucose measurement, 20 diabetes mellitus patients used the IBGDD with smartphones to measure their blood glucose level. The measurement results revealed an accuracy of 100%, completely satisfying the requirements of the ISO 15197:2013 standard. Overall, our specially designed IBGDD with a smartphone could achieve high accuracy and convenient usage for the measurement of blood glucose concentration. Furthermore, the device is highly portable and simple to operate. This contributes toward achieving self-monitoring of blood glucose by diabetes patients and improved mobile health in the future.
Asunto(s)
Automonitorización de la Glucosa Sanguínea/instrumentación , Automonitorización de la Glucosa Sanguínea/métodos , Colorimetría/instrumentación , Colorimetría/métodos , Diabetes Mellitus/sangre , Teléfono Inteligente , Glucemia/análisis , Simulación por Computador , Diabetes Mellitus/diagnóstico , Diseño de Equipo , Estudios de Factibilidad , Humanos , Análisis de Regresión , Reproducibilidad de los ResultadosRESUMEN
The novel system for self-monitoring of blood glucose (SMBG) PixoTest couples SMBG to a smartphone and does not require a separate glucose meter. The integrated system includes all components necessary for a glucose measurement, and owing to a colorimetric measurement principle, a smartphone camera can capture color changes and a software app calculates the corresponding glucose value. In the presented study, the system was evaluated in terms of system accuracy as described in ISO 15197:2013. It was shown to fulfill system accuracy requirements with 97-99% of results from three different reagent system lots within the accuracy limits and 100% of results within zone A of the consensus error grid.
Asunto(s)
Automonitorización de la Glucosa Sanguínea/instrumentación , Glucemia/metabolismo , Diabetes Mellitus/diagnóstico , Aplicaciones Móviles , Teléfono Inteligente , Biomarcadores/sangre , Automonitorización de la Glucosa Sanguínea/normas , Diabetes Mellitus/sangre , Humanos , Aplicaciones Móviles/normas , Valor Predictivo de las Pruebas , Reproducibilidad de los Resultados , Teléfono Inteligente/normas , Factores de TiempoRESUMEN
The aim of this study was to enhance the effectiveness of photo thermal therapy (PTT) in the targeting of superficial bladder cancers using a green light laser in conjunction with gold nanoparticles (GNPs) conjugated to antibody fragments (anti-EGFR). GNPs conjugated with anti-EGFR-antibody fragments were used as probes in the targeting of tumor cells and then exposed to a green laser (532nm), resulting in the production of sufficient thermal energy to kill urothelial carcinomas both in vitro and in vivo. Nanoparticles conjugated with antibody fragments are capable of damaging cancer cells even at relatively very low energy levels, while non-conjugated nanoparticles would require an energy level of 3 times under the same conditions. The lower energy required by the nanoparticles allows this method to destroy cancerous cells while preserving normal cells when applied in vivo. Nanoparticles conjugated with antibody fragments (anti-EGFR) require less than half the energy of non-conjugated nanoparticles to kill cancer cells. In an orthotopic bladder cancer model, the group treated using PTT presented significant differences in tumor development.
Asunto(s)
Receptores ErbB/antagonistas & inhibidores , Receptores ErbB/inmunología , Terapia por Luz de Baja Intensidad/métodos , Nanoconjugados/uso terapéutico , Neoplasias de la Vejiga Urinaria/terapia , Animales , Anticuerpos/administración & dosificación , Línea Celular Tumoral , Oro , Humanos , Fragmentos de Inmunoglobulinas/administración & dosificación , Nanopartículas del Metal/uso terapéutico , Nanopartículas del Metal/ultraestructura , Ratones , Ratones Endogámicos C3H , Nanoconjugados/ultraestructura , Nanotecnología , Neoplasias de la Vejiga Urinaria/ultraestructuraRESUMEN
Bladder cancer is a common malignancy of the urinary tract, which generally develops in the epithelial lining of the urinary bladder. The specific course of treatment depends on the stage of bladder cancer; however, therapeutic strategies typically involve intravesical drug delivery to reduce toxicity and increase therapeutic effects. Recently, metallic, polymeric, lipid, and protein nanoparticles have been introduced to aid in the treatment of bladder cancer. Nanoparticles are also commonly used as pharmaceutical carriers to improve interactions between drugs and the urothelium. In this review, we classify the characteristics of bladder cancer and discuss the types of nanoparticles used in various treatment modalities. Finally we summarize the potential applications and benefits of various nanoparticles in intravesical therapy.
RESUMEN
OBJECTIVE: To kill urothelial cancer cells while preserving healthy cells, this study used photothermal therapy (PTT). PTT techniques target urothelial cancer cells using gold nanoparticles (GNPs) and a green light laser. MATERIALS AND METHODS: The GNPs were conjugated with anti-Mucin 7 antibodies, which acted as a probe for targeting tumor cells. Conjugated GNPs were exposed to a green light laser (532 nm) with sufficient thermal energy to kill the transitional cell carcinomas (TCCs). RESULTS: According to our results, nanoparticles conjugated with Mucin 7 antibodies damaged all types of cancer cells (MBT2, T24, 9202, and 8301) at relatively low energy levels (i.e., 500 laser shots at 10 W/cm(2) in power, 1.6 Hz in frequency, and 300 ms in duration). Nonconjugated nanoparticles required 30 W/cm(2) or more to achieve the same effect. Cell damage was directly related to irradiation time and applied laser energy. CONCLUSIONS: The minimally invasive PTT procedure combined with Mucin 7 targeted GNPs is able to kill cancer cells and preserve healthy cells. The success of this treatment technique can likely be attributed to the lower amount of energy required to kill targeted cancer cells compared with that required to kill nontargeted cancer cells. Our in vitro pilot study yielded promising results; however, additional animal studies are required to confirm these findings.
Asunto(s)
Anticuerpos Antiidiotipos/uso terapéutico , Nanopartículas del Metal/uso terapéutico , Mucinas/uso terapéutico , Neoplasias/terapia , Proteínas y Péptidos Salivales/uso terapéutico , Animales , Anticuerpos Antiidiotipos/química , Línea Celular Tumoral , Oro/administración & dosificación , Oro/química , Humanos , Nanopartículas del Metal/química , Mucinas/química , Mucinas/inmunología , Neoplasias/inmunología , Neoplasias/patología , Fototerapia , Proteínas y Péptidos Salivales/química , Proteínas y Péptidos Salivales/inmunología , Urotelio/inmunología , Urotelio/patologíaRESUMEN
Biomimetic materials are used for creating microsystems to control cell growth spatially and elicit specific cellular responses by combining complex biomolecules with nanostructured surfaces. Intercellular cell-to-cell and cell-to-extracellular matrix (ECM) interactions in biomimetic materials have demonstrated potential in the development of drug discovery platforms and regeneration medicine. In this study, we developed a biomimetic nanostructured matrix by using various ECM molecular layers to create a biomimetic and biocompatible environment for realizing neuronal guidance in neural regeneration medicine. Silicon-based substrates possessing nanostructures were modified using different ECM proteins and peptides to develop a biomimetic and biocompatible environment for studying neural behaviors in adhesion, proliferation, and differentiation. The substrates were flat glass, flat silicon wafers (FWs), and nanorod-structured wafers prepared using wet etching. The three substrates were then functionalized using laminin-1 peptide, PA22-2-contained active isoleucine-lysine-valine-alanine-valine (IKVAV) peptide, and poly-d-lysine (PDL), separately. When PC12 cells were cultured and differentiated on the modified substrates, the cells were able to elongate the neurites on the glass and FW, which was coated with three types of peptide. More differentiated neurons were observed on the nanorod-structured wafers coated with laminin than on those coated with IKVAV or PDL. For achieving directional guidance of neurite outgrowth, substrates exhibiting a grating pattern of nanorods were partially collapsed by the pulling force of water, leaving few nanorods, which support the net form of laminin on the surface. Furthermore, we fabricated the topological nanostructure-patterned wafer coated with laminin and successfully manipulated the extension and direction of neurites by using more than 80 µm of a single soma. This approach demonstrates potential as a facile and efficient method for guiding the direction of single axons and for enhancing neurite outgrowth in studies on nerve regenerative medicine.
Asunto(s)
Materiales Biomiméticos/química , Nanotubos/química , Regeneración Nerviosa , Silicio/química , Animales , Matriz Extracelular , Laminina/química , Microscopía Electrónica de Rastreo , Microscopía Fluorescente , Nanotubos/ultraestructura , Células PC12 , Fragmentos de Péptidos/química , Polilisina/química , RatasRESUMEN
OBJECTIVES: To report our experience with hand-assisted laparoscopic nephroureterectomy (HALNU) to treat upper urinary tract transitional cell carcinoma (TCC). In addition, we report the treatment of 4 patients with upper urinary tract TCC and synchronous superficial urinary bladder TCC by HALNU and simultaneous transurethral resection of bladder tumor (TURBT). METHODS: We retrospectively reviewed 33 patients who had undergone HALNU. Recovery was evaluated according to the Eastern Cooperative Oncology Group performance status. Four patients had concomitant superficial urinary bladder cancer and underwent simultaneous TURBT at the beginning of surgery. We compared our data with those of our open surgery group and previously published data. RESULTS: Partial recovery had occurred by 1 week and complete recovery by 4 weeks postoperatively. Conversion to open surgery was required in 2 (6%) of the 33 patients. The complication rate was 24% (8 of 33) without any mortality. The recurrence rate of urinary bladder TCC was 6% (2 of 33). Both patients with recurrent tumor were treated successfully by TURBT and bacille Calmette-Guérin instillation. All 4 patients with synchronous superficial urinary bladder TCC had undergone simultaneous transurethral resection of bladder tumor, and all 4 were disease free at the last follow-up visit. CONCLUSIONS: Hand-assisted procedures are appropriate for surgeons with limited experience with laparoscopic surgery. In our study, the convalescence of patients was excellent, and the postoperative results were compatible with those of previous studies. To treat upper urinary tract TCC with synchronous urinary bladder TCC, HALNU and TURBT together seems to be a safe and efficient technique.
Asunto(s)
Carcinoma de Células Transicionales/cirugía , Neoplasias Renales/cirugía , Laparoscopía/métodos , Nefrectomía/métodos , Uréter/cirugía , Neoplasias Ureterales/cirugía , Adulto , Anciano , Anciano de 80 o más Años , China , Femenino , Hospitales de Enseñanza , Humanos , Masculino , Persona de Mediana Edad , Estudios RetrospectivosRESUMEN
Carcinosarcoma is a malignancy that occurs very rarely in the renal pelvis; thus, only a very limited number of cases has been documented. These tumors are composed of both carcinomatous and sarcomatous elements. We report here a case of a carcinosarcoma composed of well-differentiated, keratinizing, squamous carcinoma cells and high-grade sarcoma cells. Differently from the cases described so far, this carcinosarcoma of the renal pelvis was characterized by the quick recurrence, following complete surgical resection, as a highly disseminated high-grade sarcoma.
Asunto(s)
Carcinosarcoma/diagnóstico , Carcinosarcoma/cirugía , Neoplasias Renales/diagnóstico , Neoplasias Renales/cirugía , Pelvis Renal/cirugía , Recurrencia Local de Neoplasia/diagnóstico , Recurrencia Local de Neoplasia/prevención & control , Humanos , Masculino , Persona de Mediana Edad , NefrectomíaRESUMEN
PURPOSE: Treating forgotten indwelling ureteral stents is difficult because forgotten stents become encrusted and fragmented. Therefore, we developed a silk loop with which to loop the lower end of a forgotten ureteral stent during ureterorenoscopy to supply a counterforce, which fixed the stent while separating encrusted stones from the forgotten stent. We evaluated the success of the silk loop method. MATERIALS AND METHODS: Nine patients were enrolled in this study from 1997 to 2003. Each patient had a forgotten ureteral stent with renal stones on the tip of the proximal end. All consented to the procedure of silk loop assisted ureterorenoscopic lithotripsy (URSL) with a Lithoclast (Microvasive, Natick, Massachusetts) lithotriptor. RESULTS: We successfully removed the forgotten indwelling stent from all 9 patients with the silk loop assisted URSL method. CONCLUSIONS: Silk loop assisted URSL makes the removal of forgotten stents easier. While percutaneous nephrostolithotomy and open surgery produce successful results, the silk loop method is less invasive and expensive, and it minimizes hospital recovery time.