A comprehensive approach for quantifying source-specific ecological and health risks of potentially toxic elements in agricultural soil.

Given the pollution prevalence of potentially hazardous elements (PTEs) in agricultural soils worldwide, it is crucial to establish a comprehensive approach to accurately assess soil contamination, and quantitatively allocate sources and source-specific risks. In the study, soil contamination was assessed through environmental capacity based on the local geochemical baseline established using PTE contents of the subsoil. The sources of PTEs were quantified through positive matrix factorization (PMF) and GIS mapping. Ecological risk (ER) and human health risk (HHR) models based on PMF were used to evaluate source-specific ER and HHR. Taking Jieyang City as an example, obvious contamination of As, Pb, Cd, Zn and Hg was observed in agricultural soils, and 94.40% of sites had high-to-medium capacity for local PTE contamination. Four sources were apportioned including agricultural activities (17.36%), industrial activities (20.49%), natural sources (34.60%) and traffic emissions (27.55%). The study area was at moderate ER level (121.21) with industrial activities contributing the most (41.26%). The carcinogenic risks (3.21E-05 for children and 1.42E-05 for adults) were within the tolerable range, and non-carcinogenic risks (7.08E-01 for children and 7.70E-02 for adults) were not significant. Agricultural activities were the largest source to the carcinogenic (47.17% for children and 46.31% for adults) and non carcinogenic risks (53.55% for children and 53.03% for adults). Therefore, industrial activities and agricultural activities were the priority control sources to reduce ecological risk and protect human health, respectively.

Synthesis of Novel Propionamide-Methylpyrazole Carboxylates as Herbicidal Candidates.

Transketolase (TKL; EC 2.2.1.1) is a highly promising potential target for herbicidal applications. To identify novel TKL inhibitors, we designed and synthesized a series of 3-oxopropionamide-1-methylpyrazole carboxylate analogues and assessed their herbicidal activities. Ethyl 3-((1-((2,4-dichlorophenyl)amino)-1-oxopropan-2-yl)oxy)-1-methyl-1H-pyrazole-5-carboxylate (D15) and ethyl 1-methyl-3-((1-oxo-1-((thiophen-2-ylmethyl)amino)propan-2-yl)oxy)-1H-pyrazole-5-carboxylate (D20) exhibited superior growth inhibition activities against both the root and stem of Amaranthus retroflexus (A. retroflexus) compared to nicosulfuron and mesotrione. Additionally, D15 achieved an inhibition rate of more than 90% against the roots and stems of Digitaria sanguinalis (D. sanguinalis), outperforming the four control agents at a concentration of 200 mg/L using the small cup method. In the pre-emergence herbicidal activity test, D15 effectively inhibited D. sanguinalis by more than 90% at 150 g ai/ha, surpassing the efficacy of the control, mesotrione. Conversely, in the postemergence herbicidal activity test, D20 exhibited efficient inhibition of A. retroflexus by more than 90% at 150 g ai/ha, outperforming the control agents nicosulfuron, mesotrione, and metamifop. The results of the TKL enzyme activity test showed that the IC50 values of compounds D15 and D20 were 0.384 and 0.655 mg/L, respectively, which were close to those of the control agents. Furthermore, molecular docking and molecular dynamics simulation studies revealed that D15 and D20 interacted favorably with the TKL of Setaria viridis. Such findings highlight the promising potential of D15 and D20 as lead TKL inhibitors for the optimization of new herbicides.

A web-based resource for exercise training in children treated for brain tumours to improve cognitive sequelae: Development and usability.

Improving cognitive sequelae in children treated for brain tumours (CTBT) requires accessible interventions. While instructor-led exercise in a hospital setting is efficacious, it is not extended to communities. Objectives: We aimed to (i) develop a website with educational resources/tools for community health and fitness professionals (HFP) to deliver exercise for CTBT in community settings to improve cognition and (ii) assess its usability by community HFP. It was hypothesized that the website would be learnable, clear, satisfactory and efficient to deliver exercise. Methods: A scoping review determined the state of eHealth resources to support exercise for CTBT and identified knowledge and resource gaps. Three focus groups with HFP who served cancer survivors in hospital or community settings (n = 13) identified user needs; content analysis identified themes. Gaps from the scoping review and themes from focus groups informed website content. A questionnaire assessed its usability by community HFP (n = 4). Descriptive statistics inferred the website's learnability, clarity, satisfaction and efficiency. Open-ended responses identified issues. Results: The scoping review revealed a lack of eHealth resources supporting exercise to improve cognition in CTBT and education for HFP to deliver exercise. Six themes were identified in the focus groups. HFP rated the website as sufficiently learnable, clear, satisfactory and efficient. Two minor issues were reported and addressed. Conclusion: The website marks one of the first eHealth resources to increase accessibility of intervention to improve cognitive sequelae and ultimately quality of life in CTBT. HFP also gain access to education and tools to deliver exercise in community settings.

Formononetin ameliorates dextran sulfate sodium-induced colitis via enhancing antioxidant capacity, promoting tight junction protein expression and reshaping M1/M2 macrophage polarization balance.

Ulcerative colitis (UC) is a complex, refractory inflammatory bowel disease characterized impared intestinal mucosal barrier and imbalanced M1/M2 macrophage polarization mediating its progression. Formononetin (FN), a bioactive isoflavone with established anti-inflammatory and immunomodulatory properties, shows promise in mitigating UC, yet its therapeutic and underlying mechanisms remain unclear. In this study, colitis was induced in mice by administering 2.5% (w/v) dextran sulfate sodium (DSS) solution for 7 days. Oral (25, 50, and 100 mg/kg) FN for 10 days significantly ameliorated colitis symptoms in a dose-dependent manner, by mitigating body weight loss, reducing disease activity index (DAI), colonic weight, and colonic weight index, while enhancing survival rates and colonic length. Histological analysis revealed FN remarkably suppressed inflammatory damage in colonic tissues. Furthermore, FN modulated the expression of pro- and anti-inflammatory cytokines and enhanced antioxidant capacity. Notably, FN treatment significantly enhanced the expression of tight junction (TJ) proteins (claudin-1, ZO-1, occludin) at both protein and mRNA levels in the colon tissues, suggesting improved intestinal barrier function. Crucially, FN inhibited macrophage infiltration in colonic tissues and rebalanced M1/M2 macrophage polarization. While, macrophage depletion largely abrogated FN's protective effects against colitis, indicating a crucial role for macrophages in mediating FN's therapeutic response. Overall, FN effectively alleviated colitis primarily via modulating inflammatory cytokine expression, enhancing antioxidant capacity, upregulating TJs proteins expression, and remodeling M1/M2 macrophage polarization equilibrium. These findings suggest that FN could be the next candidate to unlocking UC's treatment challenge.

Comparative impact of surface and bulk fluoride anion doping on the electrochemical performance of co-free Li-rich Mn-based layered cathodes.

Li-rich Mn-based (LMR) layered oxides are considered promising cathode materials for high energy-density Li-ion batteries. Nevertheless, challenges such as irreversible oxygen loss at the surface during the initial charge, alteration of the bulk structure, and poor rate performance impede their path to commercialisation. Most modification methods focus on specific layers, making the overall impact of modifications at various depths on the properties of materials unclear. This research presents an approach by using doping to adjust both surface and bulk properties; the materials with surface and bulk fluoride anion doping are synthesised to explore the connection between doping depth, structural and electrochemical stability. The surface-doped material significantly improves the initial Coulombic efficiency (ICE) from 77.85% to 85.12% and limits phase transitions, yet it does not enhance rate performance. Conversely, doping in bulk stands out by improving both rate performance and cyclic stability: it increases the specific discharge capacity by around 60 mAh g-1 and enhances capacity retention from 57.69% to 82.26% after 300 cycles at 5C. These results highlight a notable dependence of material properties on depth, providing essential insights into the mechanisms of surface and bulk modifications.

Navel orange peel essential oil inhibits the growth and progression of triple negative breast cancer.

BACKGROUND: Triple Negative Breast Cancer (TNBC) is a particular type of breast cancer with the highest mortality rate. Essential oils are concerned more and more as potential anti-cancer drugs. METHODS: TNBC cells were treated with different concentrations of navel orange peel essential oil (NOPEO), and then a variety of  experiments were performed to investigate the changes in the growth and progression of TNBC cells. MTT assay was performed to detect the proliferation of TNBC cells. The changes of cell cycle and apoptosis were analyzed by FACS. In order to explored the migration of TNBC cells, scratch wound assay was carried out. Western blotting and qPCR were used to examine the expression of proteins and mRNA of related genes. Furthermore, RNA-seq was used to analyze the altered genes and explored the possible signal pathway. RESULTS: NOPEO demonstrated dose- and time-dependent suppression of TNBC cell growth. TNBC cells showed an increased percentage of G2/M-phase cells and the protein levels of CyclinB1 and CyclinD1 were decreased after NOPEO treatment. The apoptotic cells were increased in the NOPEO treated TNBC cells. The migration mobility was significantly inhibited by NOPEO. In total, 1376 genes were found to be up-regulated and 1335 genes were down-regulated after NOPEO treatment. According to KEGG and GO pathways, the differentially expressed genes were related to MAPK, Jak/stat and FoxQ signaling pathways. CONCLUSION: This investigation explored the bio-activity and molecular mechanisms of NOPEO against TNBC cells. These results indicated that NOPEO could suppress TNBC growth and migration perhaps via the MAPK and Jak/stat signaling pathways, which may provide theoretical reference for anticancer drug development. NOPEO may be a potential natural product for the chemotherapeutic of TNBC.

Robust and Adhesive Laminar Solid Electrolyte with Homogenous and Fast Li-Ion Conduction for High-Performance All-Solid-State Lithium Metal Battery.

Constructing composite solid electrolytes (CSEs) integrating the merits of inorganic and organic components is a promising approach to developing high-performance all-solid-state lithium metal batteries (ASSLMBs). CSEs are now capable of achieving homogeneous and fast Li-ion flux, but how to escape the trade-off between mechanical modulus and adhesion is still a challenge. Herein, a strategy to address this issue is proposed, that is, intercalating highly conductive, homogeneous, and viscous-fluid ionic conductors into robust coordination laminar framework to construct laminar solid electrolyte with homogeneous and fast Li-ion conduction (LSE-HFC). A 9 µm-thick LSH-HFC, in which poly(ethylene oxide)/succinonitrile is adsorbed by coordination laminar framework with metal-organic framework nanosheets as building blocks, is used here as an example to determine the validity. The Li-ion transfer mechanism is verified and works across the entire LSE-HFC, which facilitates homogeneous Li-ion flux and low migration energy barriers, endowing LSE-HFC with high ionic conductivity of 5.62 × 10-4 S cm-1 and Li-ion transference number of 0.78 at 25 °C. Combining the outstanding mechanical strength against punctures and the enhanced adhesion force with electrodes, LSE-HFC harvests uniform Li plating/stripping behavior. These enable the realization of high-energy-density ASSLMBs with excellent cycling stability when being assembled as LiFePO4/Li and LiNi0.6Mn0.2Co0.2O2/Li cells.

Optimizing focus: switchable modes and sub-diffraction spots in inverse circular Airy beams.

We report an experimental investigation into the tight-focusing characteristics of linearly polarized inverse circular Airy beams (ICABs). Our study reveals that tightly focused ICABs exhibit Bessel-like, needle-like, or dual foci profiles depending on whether the main ring's radius is smaller than, equal to, or larger than the critical radius. The emergence of the dual foci structure is attributed to the constrained entrance aperture of the microscope objective (MO). In contrast to traditional Gaussian beams (GBs), ICABs demonstrate remarkable advantages in terms of focal spot size. Notably, we observe a focal spot with a size of 245 nm, representing a 26.4% reduction compared to the diffraction limit. These unique properties open up promising avenues for potential applications in optical multi-plane particle trapping, conveying, and super-resolution optical imaging.

Discovery of novel Propionamide-Pyrazole-Carboxylates as Transketolase-inhibiting herbicidal candidates.

BACKGROUND: Transketolase (TKL, EC 2.2.1.1) is a key enzyme in the pentose phosphate pathway and Calvin cycle, and is expected to act as a herbicidal site-of-action. On the basis of TKL, we designed and synthesized a series of 1-oxy-propionamide-pyrazole-3-carboxylate analogues and evaluated their herbicidal activities. RESULTS: Methyl 1-methyl-5-((1-oxo-1-((4-(trifluoromethyl)phenyl)amino)propan-2-yl)oxy)-1H-pyrazole-3-carboxylate (C23) and methyl 1-methyl-5-((1-oxo-1-((perfluorophenyl)amino)propan-2-yl)oxy)-1H-pyrazole-3-carboxylate (C33) were found to provide better growth-inhibition activities against Digitaria sanguinalis root than those of nicosulfuron, mesotrione and pretilachlor at 200 mg L-1 using the small-cup method. These compounds were also identified as promising compounds in pre-emergence and postemergence herbicidal-activity experiments, with relatively good inhibitory effects toward Amaranthus retroflexus and D. sanguinalis at 150 g ai ha-1. In addition, enzyme inhibition assays and molecular docking studies revealed that C23 and C33 interact favourably with SvTKL (Setaria viridis TKL). CONCLUSION: C23 and C33 are promising lead TKL inhibitors for the optimization of new herbicides. © 2024 Society of Chemical Industry.

Stabilizing the Bulk-Phase and Solid Electrolyte Interphase of Silicon Microparticle Anode by Constructing Gradient-Hierarchically Ordered Conductive Networks.

The poor bulk-phase and interphase stability, attributable to adverse internal stress, impede the cycling performance of silicon microparticles (µSi) anodes and the commercial application for high-energy-density lithium-ion batteries. In this work, a groundbreaking gradient-hierarchically ordered conductive (GHOC) network structure, ingeniously engineered to enhance the stability of both bulk-phase and the solid electrolyte interphase (SEI) configurations of µSi, is proposed. Within the GHOC network architecture, two-dimensional (2D) transition metal carbides (Ti3C2Tx) act as a conductive "brick", establishing a highly conductive inner layer on µSi, while the porous outer layer, composed of one-dimensional (1D) Tempo-oxidized cellulose nanofibers (TCNF) and polyacrylic acid (PAA) macromolecule, functions akin to structural "rebar" and "concrete", effectively preserves the tightly interconnected conductive framework through multiple bonding mechanisms, including covalent and hydrogen bonds. Additionally, Ti3C2Tx enhances the development of a LiF-enriched SEI. Consequently, the µSi-MTCNF-PAA anode presents a high discharge capacity of 1413.7 mAh g-1 even after 500 cycles at 1.0 C. Moreover, a full cell, integrating LiNi0.8Mn0.1Co0.1O2 with µSi-MTCNF-PAA, exhibits a capacity retention rate of 92.0% following 50 cycles. This GHOC network structure can offer an efficacious pathway for stabilizing both the bulk-phase and interphase structure of anode materials with high volumetric strain.

Adsorption Structures, Vibrational Raman Spectra and Chemical Binding Properties of Thioglycolic Acid on Cu(111) Surfaces: A DFT Study.

Copper is widely used in everyday life and industrial production because of its good electrical and thermal conductivity. To overcome copper oxidation and maintain its good physical properties, small organic molecules adsorbed on the surface of copper make a passivated layer to further avoid copper corrosion. In this work, we have investigated thioglycolic acid (TGA, another name is mercaptoacetic acid) adsorbed on copper surfaces by using density functional theory (DFT) calculations and a periodical slab model. We first get five stable adsorption structures, and the binding interaction between TGA and Cu(111) surfaces by using density of states (DOS), indicating that the most stable configuration adopts a triple-end binding model. Then, we analyze the vibrational Raman spectra of TGA adsorbed on the Cu(111) surface and make vibrational assignments according to the vibrational vectors. Finally, we explore the temperature effect of the thermodynamically Gibbs free energy of TGA on the Cu(111) surface and the antioxidant ability of the small organic molecular layer of copper oxidation on the copper surface. Our calculated results further provide evidences to interpret the stability of adsorption structures and antioxidant properties of copper.

Discovery of Novel Pyrazole Acyl Thiourea Skeleton Analogue as Potential Herbicide Candidates.

To discover novel transketolase (TKL, EC 2.2.1.1) inhibitors with potential herbicidal applications, a series of pyrazole acyl thiourea derivatives were designed based on a previously obtained pyrazolamide acyl lead compound, employing a scaffold hopping strategy. The compounds were synthesized, their structures were characterized, and they were evaluated for herbicidal activities. The results indicate that 7a exhibited exceptional herbicidal activity against Digitaria sanguinalis and Amaranthus retroflexus at a dosage of 90 g ai/ha, using the foliar spray method in a greenhouse. This performance is comparable to that of commercial products, such as nicosulfuron and mesotrione. Moreover, 7a showed moderate growth inhibitory activity against the young root and stem of A. retroflexus at 200 mg/L in the small cup method, similar to that of nicosulfuron and mesotrione. Subsequent mode-of-action verification experiments revealed that 7a and 7e inhibited Setaria viridis TKL (SvTKL) enzyme activity, with IC50 values of 0.740 and 0.474 mg/L, respectively. Furthermore, they exhibited inhibitory effects on the Brassica napus acetohydroxyacid synthase enzyme activity. Molecular docking predicted potential interactions between these (7a and 7e) and SvTKL. A greenhouse experiment demonstrated that 7a exhibited favorable crop safety at 150 g ai/ha. Therefore, 7a is a promising herbicidal candidate that is worthy of further development.

[High Resolution Emission Inventory of Greenhouse Gas and Its Characteristics in Guangdong，China].

Based on the typical city survey data and statistics of Guangdong Province， a 2018-based 3 km×3 km gridded greenhouse gas emissions inventory was developed for Guangdong Province using the combination of top-down and bottom-up emission factor methods. The inventory covered the CO2， CH4， and N2O emissions from energy， industrial processes， agriculture， land use change and forest， waste management， and indirect sources. The results showed that estimates for CO2， CH4， and N2O in Guangdong Province for the year 2018 were 8.5×108， 1.9×106， and 1.1×105 t， respectively， and 8.5×108， 4.0×107， and 3.4×107 t by equivalent carbon dioxide， totaling 9.2×108 t. CO2 was the main greenhouse gas in Guangdong Province， accounting for 92.0% of the total emissions. Energy and indirect sources were the main emission sources， accounting for 77.9% and 7.6%， respectively， totaling 85.5%. Spatial distributions illustrated that most grids were greenhouse gas emissions， whereas some others were greenhouse gas sinks； the greenhouse gas emissions were distributed mainly in the Pearl River Delta region and had certain characteristics of distribution along the road network and channels. The greenhouse gas grids of high emission were mainly the locations of high energy-consuming enterprises such as large power plants， steel mills， and cement plants.

Design, Synthesis, and Herbicidal Activity of Pyrazole Amide Derivatives as Potential Transketolase Inhibitors.

The design and synthesis of new herbicidal active compounds based on a new target are of great significance for the development of new herbicides. Transketolase (TK) plays a key role in the Calvin cycle of plant photosynthesis and has been confirmed as a potential candidate target to develop and discover new herbicides. To obtain compounds with ultraefficient targeting of TK, a series of pyrazole amide derivatives were designed and synthesized through structural optimization for lead compound 4u based on TK as the new target. The bioassay results showed that compounds 6ba and 6bj displayed a highly inhibitory effect with the root inhibition of about 90% against Digitaria sanguinalis (DS) and 80% against Amaranthus retroflexus (AR) and Setaria viridis (SV) by the small cup method, which was better than the positive control mesotrione and nicosulfuron. Furthermore, compounds 6ba and 6bj exhibited an excellent inhibitory effect with the inhibition of about 80% (against DS) and over 80% (against SV) at the dosage of 150 g of active ingredient/ha by the foliar spray method. The TK enzyme activity inhibition test showed that the inhibition effect of target compounds against TK was consistent with the results of herbicidal activities. Also, molecular docking analysis showed that compounds 6ba and 6bj went deep into the active cavity of TK, bound to TK by a strong interaction, and might act on the enzyme TK. Above of all, compounds 6ba and 6bj are promising herbicide lead compounds targeting TK. Hence, they could be developed into more efficient herbicides by further structural optimization.

Enabling Stable and Low-Strain Lithium Plating/Stripping with 2D Layered Transition Metal Carbides by Forming Li-Zipped MXenes and a Li Halide-Rich Solid Electrolyte Interphase.

Two-dimensional (2D) layered materials demonstrate prominent advantage in regulating lithium plating/stripping behavior by confining lithium diffusion/plating within interlayer gaps. However, achieving effective interlayer confined lithium diffusion/plating without compromising the stability of bulk-structural and the solid electrolyte interphase (SEI) remains a considerable challenge. This paper presents an electrochemical scissor and lithium zipper-driven protocol for realizing interlayer confined lithium plating with pretty-low strain and volume change. In this protocol, lithium serves as a "zipper" to reunite the adjacent MXene back to MAX-like phase to markedly enhance the structural stability, and a lithium halide-rich SEI is formed by electrochemically removing the terminals of halogenated MXenes to maintain the stability and rapid lithium ions diffusion of SEI. When the Ti3 C2 I2 serves as the host for lithium plating, the average coulomb efficiency exceeds 97.0 % after 320 lithium plating/stripping cycles in conventional ester electrolyte. Furthermore, a full cell comprising of LiNi0.8 Mn0.1 Co0.1 O2 and Ti3 C2 I2 @Li exhibits a capacity retention rate of 73.4 % after 200 cycles even under high cathode mass-loading (20 mg cm-2 ) and a low negative/positive capacity ratio of 1.4. Our findings advance the understanding of interlayer confined lithium plating in 2D layered materials and provide a new direction in regulating lithium and other metal plating/stripping behaviors.

Establishment of an indirect competitive immunoassay for the detection of dicamba based on a highly specific nanobody.

Dicamba, a traditional highly effective and low toxicity herbicide, has gained new life with the development of dicamba-tolerant transgenic crops in recent years. However, dicamba is highly volatile and therefore easy to cause drift damage to sensitive crops. The development of efficient and sensitive detection methods is essential for monitoring of trace dicamba in the environment. Nanobody-based immunoassay plays an important role in on-site detection of pesticides. However, now rapid and sensitive immunoassay methods based on nanobody for dicamba detection were lacking. In this study, the nanobodies specifically recognizing dicamba were successfully obtained by immunising camels and phage display library construction, and then an indirect competitive immunoassay based on Nb-242 was constructed with IC50 of 0.93 µg/mL and a linear range of 0.11-8.01 µg/mL. Nb-242 had good specificity with no cross-reactivities against the dicamba analogs other than 2,3,6-trichlorobenzoic acid and the developed immnoassay had a good correlation with the standard HPLC in the spike-recovery studies. Finally, the key amino acid Ala 123, Tyr 55, Tyr 59 and Arg 72 of Nb-242 that specifically recognizing and binding with dicamba were identified by homologous modeling and molecular docking, laying an important foundation for further structural modification of Nb-242. This study has important guiding significance for constructing immunoassay method of dicamba based on nanobody and provides a sensitive, specific, and reliable detection method that is suitable for the detection of dicamba in the environment.

Enabling High-Performance Layered Li-Rich Oxide Cathodes by Regulating the Formation of Integrated Cation-Disordered Domains.

Layered Li-rich oxide cathode materials are capable of offering high energy density due to their cumulative cationic and anionic redox mechanism during (de)lithiation process. However, the structural instability of the layered Li-rich oxide cathode materials, especially in the deeply delitiated state, results in severe capacity and voltage degradation. Considering the minimal isotropic structural evolution of disordered rock salt oxide cathode during cycling, cation-disordered nano-domains have been controllably introduced into layered Li-rich oxides by co-doping of d0-TM and alkali ions. Combining electrochemical and synchrotron-based advanced characterizations, the incorporation of the phase-compatible cation-disordered domains can not only hinder the oxygen framework collapse along the c axis of layered Li-rich cathode under high operation voltage but also promote the Mn and anionic activities as well as Li+ (de)intercalation kinetics, leading to remarkable improvement in rate capability and mitigation of capacity and voltage decay. With this unique layered/rocksalt intergrown structure, the intergrown cathode yields an ultrahigh capacity of 288.4 mAh g-1 at 0.1 C, and outstanding capacity retention of ≈90.0% with obviously suppressed voltage decay after 100 cycles at 0.5, 1, and 2 C rate. This work provides a new direction toward advanced cathode materials for next-generation Li-ion batteries.

Development of an immunoassay based on a specific antibody for the detection of diphenyl ether herbicide fomesafen.

Fomesafen belongs to the diphenyl ether herbicide, and is widely used in the control of broadleaf weeds in crop fields due to its high efficiency and good selectivity. The residual of fomesafen in soil has a toxic effect on subsequent sensitive crops and the microbial community structure because of its long residual period. Therefore, an efficient method for detecting fomesafen is critical to guide the correct and reasonable use of this herbicide. Rapid and sensitive immunoassay methods for fomesafen is unavailable due to the lack of specific antibody. In this study, a specific antibody for fomesafen was generated based on rational design of haptens and a sensitive immunoassay method was established. The half maximal inhibitory concentration (IC50) of the immunoassay was 39 ng/mL with a linear range (IC10-90) of 1.92-779.8 ng/mL. In addition, the developed assay had a good correlation with the standard UPLC-MS/MS both in the spike-recovery studies and in the detection of real soil samples. Overall, the developed indirect competitive enzyme immunoassay reported here is important for detecting and quantifying fomesafen contamination in soil and other environmental samples with good sensitivity and high reproducibility.

Piezoelectric Interlayer Enabling a Rechargeable Quasisolid-State Sodium Battery at 0 °C.

Solid-state sodium (Na) batteries (SSNBs) hold great promise but suffer from several major issues, such as high interfacial resistance at the solid electrolyte/electrode interface and Na metal dendrite growth. To address these issues, a piezoelectric interlayer design for an Na3Zr2Si2PO12 (NZSP) solid electrolyte is proposed herein. Two typical piezoelectric films, AlN and ZnO, coated onto NZSP function as interlayers designed to generate a local stress-induced field for alleviating interfacial charge aggregation coupling stress concentration and promoting uniform Na plating. The results reveal that the interlayer (ZnO) with matched modulus, high Na-adhesion, and sufficient piezoelectricity can provide a favorable interphase. Low interfacial resistances of 91 and 239 Ω cm2 are achieved for the ZnO layer at 30 and 0 °C, respectively, which are notably lower than those for bare NZSP. Moreover, steady Na plating/stripping cycles are rendered over 850 and 4900 h at 0 and 30 °C, respectively. The superior anodic performance is further manifested in an Na2MnFe(CN)6-based full cell which delivers discharge capacities of 125 mA h g-1 over 1600 cycles at 30 °C and 90 mA h g-1 over 500 cycles at 0 °C. A new interlayer-design insight is clearly demonstrated for SSNBs breaking low-temperature limits.

Flexible Li-CO2 Batteries with Boosted Reaction Kinetics and Cyclelife Enabled by Heterostructured Mo3 N2 @TiN Cathode and Interface-protected Li Anode.

With theoretically endowing with high energy densities and environmentally friendly carbon neutralization ability, flexible fiber-shaped Li-CO2 battery emerges as a multipurpose platform for next-generation wearable electronics. Nevertheless, the ineluctable issues faced by cathode catalysts and Li anodes have brought enormous obstacles to the development of flexible fiber-shaped Li-CO2 batteries. Herein, a flexible fiber-shaped Li-CO2 battery based on Mo3 N2 cathode coating with atomic layer deposited TiN and Li3 N protected Li anode is constructed. Owing to the regulation surface electrons of Mo3 N2 by TiN, heterostructured cathode has more delocalized electrons which enable cathodes to stabilize 2-electron intermediate products Li2 C2 O4 by electron bridge bonds and avoid disproportionation into Li2 CO3 . Li3 N layers not only accelerate Li+ transportation but also avoid contact between Li and CO2 to form Li2 CO3 . Thus, the constructed Li-CO2 battery demonstrates a low charge potential of 3.22 V, low overpotential of 0.56 V, outstanding rate capabilities up to 1 A g-1 , and excellent long-term cycling (≈2000 h) with an energy efficiency of ≈80%. The fabricated flexible fiber-shaped Li-CO2 battery shows an ultrahigh energy density of 14 772.5 Wh kg-1 based on cathodes (340.8 Wh kg-1 based on device mass), and outstanding deformations adaptability, giving it great potential for wearable electronics.