Constructing Orbital Coupling-Modulated Homogeneous Dual-Atom Fe-Fe Sites for Boosting Bidirectional Conversion of Polysulfides.

Homogeneous dual-atom catalysts (HDACs) have garnered significant attention for their potential to overcome the shuttling effect and sluggish reaction kinetics in lithium-sulfur (Li-S) batteries. However, modulating the electron structure of metal atomic orbitals for HDACs to dictate the catalytic activity toward polysulfides has remained meaningful but unexplored so far. Herein, an interfacial cladding strategy is developed to obtain a new type of dual-atom iron matrix with a unique FeN2P1-FeN2P1 coordination structure (Fe2@NCP). The 3d orbital electrons of the Fe centers are redistributed by incorporating phosphorus atoms into the first coordination sphere. The theoretical calculations disclose that the strong coupling between the Fe d orbital and the S p orbital exhibits an enhanced Fe-S bond and improved reactivity toward polysulfides. Moreover, the Fe2@NCP catalyst achieves robust adsorption ability toward Li2Sn (1 ≤ n ≤ 8) and significantly boosts bidirectional sulfur redox reaction kinetics by lowering the Li2S deposition/decomposition energy barriers. Consequently, the assembled Li-S batteries present a high retention ratio of 77.3% after 500 cycles at 1C. Furthermore, the Li-S pouch cell also exhibits good performance at 0.1C (80.2% retention over 100 cycles) for practical application with a sulfur loading of 4.0 mg/cm2. The outcome of this study will facilitate the design of homogeneous dual-atom catalysts for Li-S batteries.

Entropy-Driven Hybrid Gel Electrolyte Enables Practical High-Voltage Lithium Metal Batteries.

Electrolyte engineering plays a crucial role in enhancing the performance of lithium metal batteries (LMBs) featuring high-voltage cathodes and limited lithium anodes, thereby unlocking their potential for high-energy electrochemical storage. Herein, an entropy-driven hybrid gel electrolyte with enhanced diversity in Li-ion solvation structures is designed by incorporating substantial amounts of insoluble LiPO2F2 and LiNO3 salts into LiPF6-based carbonate electrolytes, followed by in situ thermal polymerization. Specifically, the Li+ solvation structures are modulated via ionophilic NO3- and PO2F2- to generate an anion-rich solvation sheath and thus promote anion reduction at the electrode-electrolyte interface. The interfaces enriched in anion-derived inorganic components facilitate rapid ionic transport, thus enabling smooth and dense Li morphology and ultimately enhancing the electrochemical performance of LMBs. As a result, this high-hybrid gel electrolyte confers LMBs employing high-voltage NCM cathodes, as demonstrated by sustained performance in both coin-cell (500 cycles at 4.5 V) and Ah-level pouch cell configurations under practical conditions (60 cycles, N/P: 1.92, and E/C: 2.0 g Ah -1).

Homogeneously Planar-Exposure LiB Fiber Skeleton Toward Long-Lifespan Practical Li Metal Pouch Cells.

LiB alloy is promising lithium (Li) metal anode material because the continuous internal LiB fiber skeleton can effectively suppress Li dendrites and structural pulverization. However, the unvalued surface states limit the practical application of LiB alloy anodes. Herein, the study examined the influence of the different exposure manners of the internal LiB fiber skeleton owing to the various surface states of the LiB alloy anode on electrochemical performance and targetedly proposed a scalable friction coating strategy to construct a lithiated fumed silica (LFS) functional layer with abundant electrochemically active sites on the surface of the LiB alloy anode. The LFS significantly suppresses the inhomogeneous interfacial electrochemical behavior of the LiB alloy anode and enables the exposure of the internal LiB fiber skeleton in a homogeneously planar manner (LFS-LiB). Thus, a 0.5 Ah LFS-LiB||LiCoO2 (LCO) pouch cell exhibits a discharge capacity retention rate of 80% after 388 cycles. Moreover, a 6.15 Ah LFS-LiB||S pouch cell with 409.3 Wh kg-1 exhibits a discharge capacity retention rate of 80% after 30 cycles. In conclusion, the study findings provide a new research perspective for Li alloy anodes.

A Naphthalenetetracarboxdiimide-Containing Covalent Organic Polymer: Preparation, Single Crystal Structure and Battery Application.

Inspired by dative boron-nitrogen (B←N) bonds proven to be the promising dynamic linkage for the construction of crystalline covalent organic polymers/frameworks (COPs/COFs), we employed 1,4-bis(benzodioxaborole) benzene (BACT) and N,N'-Di(4-pyridyl)-1,4,5,8-naphthalenetetracarboxdiimide (DPNTCDI) as the corresponding building blocks to construct a functional COP (named as CityU-25), which had been employed as an anode in rechargeable lithium ion batteries. CityU-25 displayed an excellent reversible lithium storage capability of 455 mAh/g after 170 cycles at 0.1 A/g, and an impressive one of 673 mAh/g after 720 cycles at 0.5 A/g. These findings suggest that CityU-25 is a standout candidate for advanced battery technologies, highlighting the potential application of this type of materials.

Stable cycling and low-temperature operation utilizing amorphous carbon-coated graphite anodes for lithium-ion batteries.

With the continuous expansion of the lithium-ion battery market, addressing the critical issues of stable cycling and low-temperature operation of lithium-ion batteries (LIBs) has become an urgent necessity. The high anisotropy and poor kinetics of pristine graphite in LIBs contribute to the formation of precipitated lithium dendrites, especially during rapid charging or low-temperature operation. In this study, we design a graphite coated with amorphous carbon (GC) through the Chemical Vapor Deposition (CVD) method. The coated carbon layer at the graphite interface exhibits enhanced reaction kinetics and expanded lithium-ion diffusion pathways, thereby reduction in polarization effectively alleviates the risk of lithium precipitation during rapid charging and low-temperature operation. The pouch cell incorporating GC‖LiCoO2 exhibits exceptional durability, retaining 87% of its capacity even after 1200 cycles at a high charge/discharge rate of 5C/5C. Remarkably, at -20 °C, the GC-2 maintains a specific capacity of 163 mA h g-1 at 0.5C, higher than that of pristine graphite (65 mA h g-1). Even at -40 °C, the GC-2‖LiCoO2 pouch cell still shows excellent capacity retention. This design realizes the practical application of graphite anode in extreme environments, and have a promising prospect of application.

Lightweight 3D Lithiophilic Graphene Aerogel Current Collectors for Lithium Metal Anodes.

Constructing three-dimensional (3D) current collectors is an effective strategy to solve the hindrance of the development of lithium metal anodes (LMAs). However, the excessive mass of the metallic scaffold structure leads to a decrease in energy density. Herein, lithiophilic graphene aerogels comprising reduced graphene oxide aerogels and silver nanowires (rGO-AgNW) are synthesized through chemical reduction and freeze-drying techniques. The rGO aerogels with large specific surface areas effectively mitigate local current density and delay the formation of lithium dendrites, and the lithiophilic silver nanowires can provide sites for the uniform deposition of lithium. The rGO-AgNW/Li symmetric cell presents a stable cycle of about 2000 h at 1 mA cm-2. When coupled with the LiFePO4 cathode, the assembled full cells exhibit outstanding cycle stability and rate performance. Lightweight rGO-AgNW aerogels, as the host for lithium metal, can significantly improve the energy density of lithium metal anodes.

Comprehensive Analysis of PKD1 and PKD2 by Long-Read Sequencing in Autosomal Dominant Polycystic Kidney Disease.

BACKGROUND: Autosomal dominant polycystic kidney disease (ADPKD) is mainly caused by heterogeneous variants in the PKD1 and PKD2 genes. Genetic analysis of PKD1 has been challenging due to homology with 6 PKD1 pseudogenes and high GC content. METHODS: A single-tube multiplex long-range-PCR and long-read sequencing-based assay termed "comprehensive analysis of ADPKD" (CAPKD) was developed and evaluated in 170 unrelated patients by comparing to control methods including next-generation sequencing (NGS) and multiplex ligation-dependent probe amplification. RESULTS: CAPKD achieved highly specific analysis of PKD1 with a residual noise ratio of 0.05% for the 6 pseudogenes combined. CAPKD identified PKD1 and PKD2 variants (ranging from variants of uncertain significance to pathogenic) in 160 out of the 170 patients, including 151 single-nucleotide variants (SNVs) and insertion-deletion variants (indels), 6 large deletions, and one large duplication. Compared to NGS, CAPKD additionally identified 2 PKD1 variants (c.78_96dup and c.10729_10732dup). Overall, CAPKD increased the rate of variant detection from 92.9% (158/170) to 94.1% (160/170), and the rate of diagnosis with pathogenic or likely pathogenic variants from 82.4% (140/170) to 83.5% (142/170). CAPKD also directly determined the cis-/trans-configurations in 11 samples with 2 or 3 SNVs/indels, and the breakpoints of 6 large deletions and one large duplication, including 2 breakpoints in the intron 21 AG-repeat of PKD1, which could only be correctly characterized by aligning to T2T-CHM13. CONCLUSIONS: CAPKD represents a comprehensive and specific assay toward full characterization of PKD1 and PKD2 variants, and improves the genetic diagnosis for ADPKD.

Molten-Salt-Assisted Strategy Enables High-Rate Micron-Sized Single-Crystal Li-Rich, Mn-Based Layered Oxide Cathode Materials.

Li-rich Mn-based layered oxides (LMLOs) are expected to be the most promising high-capacity cathodes for the next generation of lithium-ion batteries (LIBs). However, the poor cycling stability and kinetics performance of polycrystalline LMLOs restrict their practical applications due to the anisotropic lattice stress and crack propagation during cycling. Herein, B-doped micron-sized single-crystal Co-free LMLOs were obtained by molten-salt (LiNO3 and H3BO3)-assisted sintering. The results reveal that the low-melting-point molten salt can serve as liquid-phase media to improve the efficiency of atomic mass transfer and crystal nucleation and growth. The modified single-crystal LMLO cathodes can resist the accumulation of anisotropic stress and strain during the cycling and reduce interface side reactions, thus achieving excellent high-voltage stability and kinetics performance. The reversible specific capacity of the single crystals is 210.8 mAh g-1 at 1C with a voltage decay rate of 1.95 mV/cycle and up to 161.1 mAh g-1 at 10C with a capacity retention of 81.06% after 200 cycles.

Evaluating the efficacy of a long-read sequencing-based approach in the clinical diagnosis of neonatal congenital adrenocortical hyperplasia.

Congenital adrenal hyperplasia (CAH) is a group of autosomal recessive disorders predominantly characterized by impaired corticosteroid synthesis. Clinical phenotypes include hypoadrenocorticism, electrolyte disturbances, abnormal gonadal development, and short stature, of which severe hyponadrenocorticism and salt wasting can be life-threatening. Genetic analysis can help in the clinical diagnosis of CAH. However, the 21-OHD-causing gene CYP21A2 is arranged in tandem with the highly homologous CYP21A1P pseudogene, making it difficult to determine the exact genotypes using the traditional method of multiplex ligation-dependent probe amplification (MLPA) plus Sanger sequencing or next-generation sequencing (NGS). We applied a long-read sequencing-based approach termed comprehensive analysis of CAH (CACAH) to 48 newborns with CAH that were diagnosed by clinical features and the traditional MLPA plus Sanger sequencing method for retrospective analysis, to evaluate its efficacy in the clinical diagnosis of neonatal CAH. Compared with the MLPA plus Sanger sequencing method, CACAH showed 100 % consistency in detecting SNV/indel variants located in exons and exon-intron boundary regions of CAH-related genes. It can directly determine the cis-trans relationship without the need to analyze parental genotypes, which reduces the time to diagnosis. Moreover, CACAH was able to distinguish different CYP21A1P/CYP21A2 and TNXA/TNXB chimeras, and detect additional variants (CYP21A2 variants c.-121C > T, c.*13G > A, c.*52C > T, c.*440C > T, c.*443 T > C, and TNXB variants c.12463 + 2 T > C, c.12204 + 5G > A). We also identified the TNXB variant c.11435_11524 + 30del alone instead of as a part of the TNXA/TNXB-CH-1 chimera in two newborns, which might be introduced by gene conversion. All of these characteristics enabled clinicians to better explain the phenotype of subjects and manage them more effectively. CACAH has a great advantage over the traditional MLPA and Sanger sequencing methods, showing substantial potential in the genetic diagnosis and screening of neonatal CAH.

Structural Distortion in the Wadsley-Roth Niobium Molybdenum Oxide Phase Triggering Extraordinarily Stable Battery Performance.

Wadsley-Roth niobium oxide phases have attracted extensive research interest recently as promising battery anodes. We have synthesized the niobium-molybdenum oxide shear phase (Nb, Mo)13 O33 with superior electrochemical Li-ion storage performance, including an ultralong cycling lifespan of at least 15000 cycles. During electrochemical cycling, a reversible single-phase solid-solution reaction with lithiated intermediate solid solutions is demonstrated using in situ X-ray diffraction, with the valence and short-range structural changes of the electrode probed by in situ Nb and Mo K-edge X-ray absorption spectroscopy. This work reveals that the superior stability of niobium molybdenum oxides is underpinned by changes in octahedral distortion during electrochemical reactions, and we report an in-depth understanding of how this stabilizes the oxide structure during cycling with implications for future long-life battery material design.

Orderly Arranged Dipoles Regulate Anion-Derived Solid-Electrolyte Interphase for Stable Lithium Metal Chemistry.

Lithium (Li) metal batteries are considered the most promising high-energy-density electrochemical energy storage devices of the next generation. However, the unstable solid-electrolyte interphase (SEI) derived from electrolytes usually leads to high impedance, Li dendrites growth, and poor cyclability. Herein, the ferroelectric BaTiO3 with orderly arranged dipoles (BTOV) is integrated into the polypropylene separator as a functional layer. Detailed characterizations and theoretical calculations indicate that surface oxygen vacancies drive the phase transition of BaTiO3 materials and promote the ordered arrangement of dipoles. The strong dipole moments in BTOV can adsorb TFSI- and NO3 - anions selectively and promote their preferential reduction to form a SEI film enriched with inorganic LiF and LiNxOy species, thus facilitating the rapid transfer of Li+ and restraining the growth of Li dendrites. As a result, the Li-Li cell with the BTOV functional layer exhibits enhanced Li plating/stripping cycling with an ultra-long life of over 7000 h at 0.5 mA cm-2/1.0 mAh cm-2. The LiFePO4 || Li (50 µm) full cells display excellent cycling performance exceeding 1760 cycles and superior rate performance. This work provides a new perspective for regulating SEI chemistry by introducing ordered dipoles to control the distribution and reaction of anions.

Hydrogen Bond Boosted Ferroelectric Polarization Enables High Rate Capability Lithium Metal Batteries.

Lithium metal is considered as a promising anode material for next generation lithium-based batteries due to its highest specific capacity and lowest reduction potential. However, irreversible lithium stripping/depositing gives rise to severe dendritic growth and countless dead lithium, which lead to rapid electrochemical performance degradation and increased safety hazards, and thus limit its large-scale application. Herein, this work demonstrates a universal hydrogen-bond-induced strategy to in situ form a highly polarized ferroelectric polyvinylidene fluoride (PVDF) coating on the anode current collector. The localized electric field induced by the polarized ferroelectric PVDF can accelerate the migration of lithium ions and alleviate the shortage of lithium ions and uneven ion/electron distribution and transfer at the anode/electrolyte interface, thus promoting uniform deposition and stripping of Li+ at high-rate situations. As a result, the symmetrical Li || Li batteries with polarized PVDF coating exhibit a long cycling lifespan over 900 h under 2 mA cm-2 with marginal voltage polarization, and an ultra-high-rate performance up to 8.85 mA cm-2 . The full cells using LiFePO4 cathode also display enhanced electrochemical performance. The innovative strategy of ferroelectric polarization sheds light on interface engineering to circumvent Li dendrite growth in lithium metal batteries (LMBs).

Functional Polymers as Artificial Solid Electrolyte Interfaces for Stabilizing Lithium Metal Anode.

The practical implementation of the lithium metal anode (LMA) has long been pursued due to its extremely high specific capacity and low electrochemical equilibrium potential. However, the unstable interfaces resulting from lithium ultrahigh reactivity have significantly hindered the use of LMA. This instability directly leads to dendrite growth behavior, dead lithium, low Coulombic efficiency, and even safety concerns. Therefore, artificial solid electrolyte interfaces (ASEI) with enhanced physicochemical and electrochemistry properties have been explored to stabilize LMA. Polymer materials, with their flexible structures and multiple functional groups, offer a promising way for structurally designing ASEIs to address the challenges faced by LMA. This Concept demonstrates an overview of polymer ASEIs with different functionalities, such as providing uniform lithium ion and single-ion transportation, inhibiting side reactions, possessing self-healing ability, and improving air stability. Furthermore, challenges and prospects for the future application of polymeric ASEIs in commercial lithium metal batteries (LMBs) are also discussed.

Comparison of Third-Generation Sequencing and Routine Polymerase Chain Reaction in Genetic Analysis of Thalassemia.

CONTEXT.­: Thalassemia is the most widely distributed monogenic autosomal recessive disorder in the world. Accurate genetic analysis of thalassemia is crucial for thalassemia prevention. OBJECTIVE.­: To compare the clinical utility of a third-generation sequencing-based approach termed comprehensive analysis of thalassemia alleles with routine polymerase chain reaction (PCR) in genetic analysis of thalassemia and explore the molecular spectrum of thalassemia in Hunan Province. DESIGN.­: Subjects in Hunan Province were recruited, and hematologic testing was performed. Five hundred four subjects positive on hemoglobin testing were then used as the cohort, and third-generation sequencing and routine PCR were used for genetic analysis. RESULTS.­: Of the 504 subjects, 462 (91.67%) had the same results, whereas 42 (8.33%) exhibited discordant results between the 2 methods. Sanger sequencing and PCR testing confirmed the results of third-generation sequencing. In total, third-generation sequencing correctly detected 247 subjects with variants, whereas PCR identified 205, which showed an increase in detection of 20.49%. Moreover, α triplications were identified in 1.98% (10 of 504) hemoglobin testing-positive subjects in Hunan Province. Seven hemoglobin variants with potential pathogenicity were detected in 9 hemoglobin testing-positive subjects. CONCLUSIONS.­: Third-generation sequencing is a more comprehensive, reliable, and efficient approach for genetic analysis of thalassemia than PCR, and allowed for a characterization of the thalassemia spectrum in Hunan Province.

Crosslinked solubilizer enables nitrate-enriched carbonate polymer electrolytes for stable, high-voltage lithium metal batteries.

High-voltage lithium metal batteries (LMBs) have been considered promising next-generation high-energy-density batteries. However, commercial carbonate electrolytes can scarcely be employed in LMBs owing to their poor compatibility with metallic lithium. N,N-dimethylacrylamide (DMAA)-a crosslinkable solubilizer with a high Gutmann donor number-is employed to facilitate the dissolution of insoluble lithium nitrate (LiNO3) in carbonate-based electrolytes and to form gel polymer electrolytes (GPEs) through in situ polymerization. The Li+ solvation structure of the GPEs is regulated using LiNO3 and DMAA, which suppresses the decomposition of LiPF6 and facilitates the formation of an inorganic-rich solid electrolyte interface. Consequently, the Coulombic efficiency (CE) of the Li||Cu cell assembled with a GPE increases to 98.5% at room temperature, and the high-voltage Li||NCM622 cell achieves a capacity retention of 80.1% with a high CE of 99.5% after 400 cycles. The bifunctional polymer electrolytes are anticipated to pave the way for next-generation high-voltage LMBs.

In Situ Formed Tribofilms as Efficient Organic/Inorganic Hybrid Interlayers for Stabilizing Lithium Metal Anodes.

The practical application of Li metal anodes (LMAs) is limited by uncontrolled dendrite growth and side reactions. Herein, we propose a new friction-induced strategy to produce high-performance thin Li anode (Li@CFO). By virtue of the in situ friction reaction between fluoropolymer grease and Li strips during rolling, a robust organic/inorganic hybrid interlayer (lithiophilic LiF/LiC6 framework hybridized -CF2-O-CF2- chains) was formed atop Li metal. The derived interface contributes to reversible Li plating/stripping behaviors by mitigating side reactions and decreasing the solvation degree at the interface. The Li@CFO||Li@CFO symmetrical cell exhibits a remarkable lifespan for 5,600 h (1.0 mA cm-2 and 1.0 mAh cm-2) and 1,350 cycles even at a harsh condition (18.0 mA cm-2 and 3.0 mAh cm-2). When paired with high-loading LiFePO4 cathodes, the full cell lasts over 450 cycles at 1C with a high-capacity retention of 99.9%. This work provides a new friction-induced strategy for producing high-performance thin LMAs.

Stabilizing Lithium Metal Batteries by Synergistic Effect of High Ionic Transfer Separator and Lithium-Boron Composite Material Anode.

The development of lithium (Li) metal batteries (LMBs) has been limited by problems, such as severe dendrite growth, drastic interfacial reactions, and large volume change. Herein, an LMB (8AP@LiB) combining agraphene oxide-poly(ethylene oxide) (PEO) functionalized polypropylene separator (8AP) with a lithium-boron (LiB) anode is designed to overcome these problems. Raman results demonstrate that the PEO chain on 8AP can influence the Li+ solvation structure in the electrolyte, resulting in Li+ homogeneous diffusion and Li+ deposition barrier reduction. 8AP exhibits good ionic conductivity (4.9 × 10-4 S cm-1), a high Li+ migration number (0.88), and a significant electrolyte uptake (293%). The 3D LiB skeleton can significantly reduce the anode volume changes and local current density during the charging/discharging process. Therefore, 8AP@LiB effectively regulates the Li+ flux and promotes the uniform Li deposition without dendrites. The Li||Li symmetrical cells of 8AP@LiB exhibit a high electrochemical stability of up to 1000 h at 1 mA cm-2 and 5 mAh cm-2. Importantly, the Li||LiFePO4 full cells of 8AP@LiB achieve an impressive 2000 cycles at 2C, while maintaining a high-capacity retention of 86%. The synergistic effect of the functionalized separator and LiB anode might provide a direction for the development of high-performance LMBs.

Interfacial friction enabling ≤ 20 µm thin free-standing lithium strips for lithium metal batteries.

A practical high-specific-energy Li metal battery requires thin (≤20 µm) and free-standing Li metal anodes, but the low melting point and strong diffusion creep of lithium metal impede their scalable processing towards thin-thickness and free-standing architecture. In this paper, thin (5 to 50 µm) and free-standing lithium strips were achieved by mechanical rolling, which is determined by the in situ tribochemical reaction between lithium and zinc dialkyldithiophosphate (ZDDP). A friction-induced organic/inorganic hybrid interface (~450 nm) was formed on Li with an ultra-high hardness (0.84 GPa) and Young's modulus (25.90 GPa), which not only enables the scalable process mechanics of thin lithium strips but also facilitates dendrite-free lithium metal anodes by inhibiting dendrite growth. The rolled lithium anode exhibits a prolonged cycle lifespan and high-rate cycle stability (in excess of more than 1700 cycles even at 18.0 mA cm-2 and 1.5 mA cm-2 at 25 °C). Meanwhile, the LiFePO4 (with single-sided load 10 mg/cm2) ||Li@ZDDP full cell can last over 350 cycles with a high-capacity retention of 82% after the formation cycles at 5 C (1 C = 170 mA/g) and 25 °C. This work provides a scalable approach concerning tribology design for producing practical thin free-standing lithium metal anodes.

Building Sustainable Saturated Fatty Acid-Zinc Interfacial Layer toward Ultra-Stable Zinc Metal Anodes.

The commercialization pace of aqueous zinc batteries (AZBs) is seriously limited due to the uncontrolled dendrite growth and severe corrosion reaction of the zinc anode. Herein, a universal and extendable saturated fatty acid-zinc interfacial layer strategy for modulating the interfacial redox process of zinc toward ultrastable Zn metal anodes is proposed. The in situ complexing of saturated fatty acid-zinc interphases could construct an extremely thin zinc compound layer with continuously constructed zincophilic sites which kinetically regulates Zn nucleation and deposition behaviors. Furthermore, the multifunctional interfacial layer with internal hydrophobic carbon chains as a protective layer is efficient to exclude active water molecules from the surface and efficiently inhibit the surface corrosion of zinc. Consequently, the modified anode shows a long cycle life of over 4000 h at 5 mA cm-2. In addition, the assembled Zn||V2O5 full cells based on modified zinc anodes have excellent rate performance and long cycle stability.

Reactive Polymer as Artificial Solid Electrolyte Interface for Stable Lithium Metal Batteries.

Lithium (Li) metal anodes have the highest theoretical capacity and lowest electrochemical potential making them ideal for Li metal batteries (LMBs). However, Li dendrite formation on the anode impedes the proper discharge capacity and practical cycle life of LMBs, particularly in carbonate electrolytes. Herein, we developed a reactive alternative polymer named P(St-MaI) containing carboxylic acid and cyclic ether moieties which would in situ form artificial polymeric solid electrolyte interface (SEI) with Li. This SEI can accommodate volume changes and maintain good interfacial contact. The presence of carboxylic acid and cyclic ether pendant groups greatly contribute to the induction of uniform Li ion deposition. In addition, the presence of benzyl rings makes the polymer have a certain mechanical strength and plays a key role in inhibiting the growth of Li dendrites. As a result, the symmetric Li||Li cell with P(St-MaI)@Li layer can stably cycle for over 900 h under 1 mA cm-2 without polarization voltage increasing, while their Li||LiFePO4 full batteries maintain high capacity retention of 96 % after 930 cycles at 1C in carbonate electrolytes. The innovative strategy of artificial SEI is broadly applicable in designing new materials to inhibit Li dendrite growth on Li metal anodes.