Soluble signal inhibitory receptor on leukocytes-1 reflects disease activity and assists diagnosis of patients with rheumatoid arthritis.

BACKGROUND: SIRL-1, an immunosuppressive receptor encoded by the VSTM1 gene, has recently been linked to rheumatoid arthritis (RA) due to its association with activated polymorphonuclear neutrophils (PMNs). Considering that the activated PMNs play a crucial role in the pathogenesis of rheumatoid arthritis (RA), we aimed to measure the levels of soluble SIRL-1, investigating whether they add value to RA in the clinical diagnosis. METHODS: Utilizing an enzyme-linked immunosorbent assay, the concentration of sSIRL-1 was measured in serum samples from cohort 1 diagnosed with RA (n = 96), gout (n = 54), osteoarthritis (n = 47), healthy controls (n = 86) and synovial fluid samples from OA (n = 8) and RA (n = 8) patients, respectively. Additionally, an external validation in cohort 2 (n = 156) comprising various inflammatory diseases was employed. RESULTS: The study revealed a distinctive upregulation of sSIRL-1 in the serum of RA compared to HC and other arthralgia diseases (p < 0.0001), which also displayed a significant elevation in synovial fluid from RA compared to OA (p < 0.05). Notably, sSIRL-1 levels exhibited a significant decrease in patients who achieved disease remission (p < 0.05). Furthermore, the diagnostic accuracy of RA was enhanced when sSIRL-1 was combined with anti-CCP and RF, yielding an impressive AUC value of 0.950. CONCLUSION: The expression pattern of sSIRL-1 in RA, coupled with its correlation with disease activity, underscores its potential clinical utility for both diagnosis and disease monitoring in RA patients. This study offers valuable insights into the evolving diagnostic landscape of RA.

Development and evaluation of a centrifugal disk system for the rapid detection of multiple pathogens and their antibiotic resistance genes in urinary tract infection.

Background: Urinary tract infections (UTIs) are some of the most common bacterial infections in the world. Nevertheless, as uncomplicated UTIs are treated empirically without culturing the urine, adequate knowledge of the resistance pattern of uropathogens is essential. Conventional urine culture and identification take at least 2 days. Here, we developed a platform based on LAMP and centrifugal disk system (LCD) to simultaneously detect the main pathogens and antibiotic resistant genes (ARGs) of urgent concern multidrug-resistant among UTIs. Methods: We designed specific primers to detect the target genes above and evaluated their sensitivity and specificity. We also assessed the result of our preload LCD platform on 645 urine specimens with a conventional culturing method and Sanger sequencing. Results: The results obtained with the 645 clinical samples indicated that the platform has high specificity (0.988-1) and sensitivity (0.904-1) for the studied pathogens and ARGs. Moreover, the kappa value of all pathogens was more than 0.75, revealing an excellent agreement between the LCD and culture method. Compared to phenotypic tests, the LCD platform is a practical and fast detection approach for methicillin-resistant Staphylococcus aureus, vancomycin-resistant Enterococci, carbapenem-resistant Enterobacteriaceae, carbapenem-resistant Acinetobacter, carbapenem-resistant Pseudomonas aeruginosa (kappa value of all >0.75), and non-extended-spectrum ß-lactamase producers. Conclusion: We developed a detection platform that has high accuracy and that meets the need for rapid diagnosis, which can be completed within 1.5 h from specimen collection. It may be a powerful tool for evidence-based UTIs diagnosis, which has essential support for the rational use of antibiotics. More high-quality clinical studies are required to prove the effectiveness of our platform.

Rapid LC-MS/MS detection of different carbapenemase types in carbapenemase-producing Enterobacterales.

Klebsiella pneumoniae carbapenemase (KPC)-2, metallo-beta-lactamases (MBL), and oxacillinase (OXA)-48-like carbapenemases are considered the most important carbapenemases. In vitro studies have demonstrated that the carbapenemase activity of KPC-2 and MBL can be inhibited by 3-aminophenylboronic acid and ethylenediaminetetraacetic acid (EDTA), respectively. Understanding the carbapenemase types expressed in carbapenem-resistant Enterobacterales (CRE) is of great significance to clinical therapies. Liquid chromatography-coupled tandem mass spectrometry (LC-MS/MS) is fast, stable, and specific; and is considered the gold standard method for measuring small molecules. In this study, we developed carbapenemase inhibition tests combined with LC-MS/MS to rapidly identify carbapenemase types. A total of 295 clinical isolates were examined, including 212 KPC-2 producers, 29 MBL producers, 15 OXA-48-like producers, 3 KPC-2 + OXA-232 producers, and 36 carbapenem-sensitive strains. We used LC-MS/MS to determine the carbapenemase types by measuring the ratio of the hydrolyzed meropenem peak areas in the presence and absence of different inhibitors. The sensitivity and specificity of LC-MS/MS in detecting single KPC-2 producers were 97.64% and 100.00%, respectively, and 96.55% and 100.00% for MBL producers, respectively. In addition, the sensitivity and specificity of LC-MS/MS in detecting single OXA-48-like producers were both 100.00% when extending incubation time up to 2.5 h. LC-MS/MS showed excellent agreement in detecting carbapenemase types using the modified carbapenem inactivation (mCIM)/EDTA-carbapenem inactivation assay (eCIM) (kappa = 0.93 for serine carbapenemases and kappa = 0.98 for MBL carbapenemases). In this study, LC-MS/MS demonstrated excellent detection of different carbapenemase types, showing potential reliability in future clinical applications.

Evaluation of LAMP assay using phenotypic tests and PCR for detection of blaKPC gene among clinical samples.

BACKGROUND: Carbapenem-resistant Enterobacteriaceae (CRE) infection constitutes a public health threat, which blaKPC was the major carbapenemases concerned in China. Timely and efficient diagnosis is of paramount importance for controlling the spread of drug-resistant bacteria. Here, we develop an approach based on loop-mediated isothermal amplification (LAMP) for rapid confirmation of blaKPC within 60 min from samples collected. METHODS: We designed primers specific to detect blaKPC and evaluated it for its sensitivity and specificity of detection using real-time monitoring. Five hundred forty-six clinical specimens were analyzed by the LAMP assay and compared with the phenotypic tests and PCR. The samples with inconsistent results were further verified by Sanger sequencing. RESULTS: The LAMP assay displayed a detection limit of 1 × 102  CFU/ml, which was 10-fold more sensitive than the PCR. No cross-reactivity was observed for strains that produced other types of ß-lactamase. Furthermore, we demonstrated concordant results (Kappa > 0.75) between the genotypic method and phenotypic tests for the 546 clinical samples. The data presented in this study suggested that the genotypic method is a reliable assay for identifying blaKPC-induced CRE in China. The results of the Sanger sequencing indicate that the developed method not only has high accuracy but also meets the need for rapid diagnosis, while the PCR method is prone to false negatives. CONCLUSIONS: We successfully constructed a LAMP technique that can be used for auxiliary diagnosis of CRE, which is faster, cheaper, and more accurate than the PCR. It may therefore be routinely applied for detection of blaKPC producers in routine clinical laboratories.

Universally Stable and Precise CRISPR-LAMP Detection Platform for Precise Multiple Respiratory Tract Virus Diagnosis Including Mutant SARS-CoV-2 Spike N501Y.

Nowadays, rapid and accurate diagnosis of respiratory tract viruses is an urgent need to prevent another epidemic outbreak. To overcome this problem, we have developed a clustered, regularly interspaced short palindromic repeats (CRISPR) loop mediated amplification (LAMP) technology to detect influenza A virus, influenza B virus, respiratory syncytial A virus, respiratory syncytial B virus, and severe acute respiratory syndrome coronavirus 2, including variants of concern (B.1.1.7), which utilized CRISPR-associated protein 12a (Cas12a) to advance LAMP technology with the sensitivity increased 10 times. To reduce aerosol contamination in CRISPR-LAMP technology, an uracil-DNA-glycosylase-reverse transcription-LAMP system was also developed which can effectively remove dUTP-incorporated LAMP amplicons. In vitro Cas12a cleavage reaction with 28 crRNAs showed that there were no position constraints for Cas12a/CRISPR RNA (crRNA) recognition and cleavage in LAMP amplicons, and even the looped position of LAMP amplicons could be effectively recognized and cleaved. Wild-type or spike N501Y can be detected with a limit of detection of 10 copies/µL (wild-type) even at a 1% ratio level on the background (spike N501Y). Combining UDG-RT-LAMP technology, CRISPR-LAMP design, and mutation detection design, we developed a CRISPR-LAMP detection platform that can precisely diagnose pathogens with better stability and significantly improved point mutation detection efficiency.

A LAMP-based system for rapid detection of eight common pathogens causing lower respiratory tract infections.

Lower respiratory tract infections (LRTIs) are a leading cause of morbidity and mortality worldwide and lack a rapid diagnostic method. To improve the diagnosis of LRTIs, we established an available loop-mediated isothermal amplification (LAMP) assay for the detection of eight common lower respiratory pathogens, including Klebsiella pneumoniae, Pseudomonas aeruginosa, Acinetobacter baumannii, Staphylococcus aureus, Escherichia coli, Haemophilus influenzae, Streptococcus pneumoniae, and Moraxella catarrhalis. The whole process can be achieved within 1 h (sample to results read out). We established an extraction free isothermal system. 528 sputum samples collected from patients suspected to have LRTIs were analyzed by the system (8 tests in each sample, a total of 4224 tests) and compared with the standard culture method (SCM). The samples with inconsistent results were further verified by Sanger sequencing and High-throughput sequencing (NGS). The detection limits of the LAMP assay for the 8 pathogens ranged from 103 to 104 CFU/mL. Upon testing 528 samples, the Kappa coefficients of all pathogens ranged between 0.5 and 0.7 indicated a moderate agreement between the LAMP assay and the SCM. All inconsistent samples were further verified by Sanger sequencing, we found that the developed LAMP assay had a higher consistency level with Sanger sequencing than the SCM for all pathogens. Additionally, when the NGS was set to a diagnostic gold standard, the specificity and sensitivity of the LAMP assay for LRTIs were 94.49% and 75.00%. The present study demonstrated that the developed LAMP has high consistency with the sequencing methods. Meanwhile, the LAMP assay has a higher detection rate compared to the SCM. It may be a powerful tool for rapid and reliable clinical diagnosis of LRTIs in primary hospitals.

Development of a loop-mediated isothermal amplification assay for the rapid detection of six common respiratory viruses.

Due to the highly contagious and spreads quickly of respiratory infectious diseases (ADR), the availability of rapid, sensitive, and reliable diagnostic methods is essential for disease control. Here, we develop an approach based on loop-mediated isothermal amplification (LAMP) for the detection of influenza A virus (Flu A), Flu A subtypes H1N1and H3N2, influenza B virus (Flu B), respiratory syncytial virus (RSV) subtypes A and B, human adenovirus (HAdV), parainfluenza virus (PIV) subtypes 1 and 3, and human rhinovirus (HRV) simultaneously. We designed primers specific to detect respiratory viruses above, optimized the RT-LAMP assay and evaluated it for its sensitivity and specificity of detection using real-time monitoring based on SYBR Green I. We also evaluated the result of our RT-LAMP assay on 638 nasopharyngeal swab specimens with the commercial RT-PCR by Cohen's Kappa. The inconsistent results were verified by Sanger sequencing furtherly. The developed RT-LAMP assay displayed a detection limit of 1 × 102 copies/ml RNA close to that of RT-PCR; no cross-reactivity was observed in the 10 kinds of viruses studied. The results obtained with 638 clinical samples indicate that the developed method has high specificity (0.988-1) and sensitivity (0.863-1) for viruses studied, and the Kappa value of all viruses was more than 0.85 revealed an excellent agreement between the two methods. We developed an RT-LAMP-based method and optimized for the detection of common respiratory viruses. It may be a powerful tool for rapid and reliable clinical diagnosis of ADR in primary hospitals.

Application of a nanotechnology antimicrobial spray to prevent lower urinary tract infection: a multicenter urology trial.

BACKGROUND: Catheter-associated urinary tract infection (CAUTI) is a common nosocomial device-associated infection. It is now recognized that the high infection rates were caused by the formation of biofilm on the surface of the catheters that decreases the susceptibility to antibiotics and results in anti-microbial resistance.In this study, we performed an in vitro test to explore the mechanism of biofilm formation and subsequently conducted a multi-center clinical trial to investigate the efficacy of CAUTI prevention with the application of JUC, a nanotechnology antimicrobial spray. METHODS: Siliconized latex urinary catheters were cut into fragments and sterilized by autoclaving. The sterilized sample fragments were randomly divided into the therapy and control group, whereby they were sprayed with JUC and distilled water respectively and dried before use.The experimental standard strains of Escherichia coli (E. coli) were isolated from the urine samples of patients. At 16 hours and 7 days of incubation, the samples were extracted for confocal laser scanning microscopy.A total of 1,150 patients were accrued in the clinical study. Patients were randomized according to the order of surgical treatment. The odd array of patients was assigned as the therapy group (JUC), and the even array of patients was assigned as the control group (normal saline). RESULTS: After 16 hours of culture, bacterial biofilm formed on the surface of sample fragments from the control group. In the therapy group, no bacterial biofilm formation was observed on the sample fragments. No significant increase in bacterial colony count was observed in the therapy group after 7 days of incubation.On the 7th day of catheterization, urine samples were collected for bacterial culture before extubation. Significant difference was observed in the incidence of bacteriuria between the therapy group and control group (4.52% vs. 13.04%, p < 0.001). CONCLUSIONS: In this study, the effectiveness of JUC in preventing CAUTI in a hospital setting was demonstrated in both in vitro and clinical studies.