Soret Effect of Ionic Liquid Gels for Thermoelectric Conversion.

Cations and anions can accumulate at the two ends of an ionic conductor under temperature gradient, which is the so-called Soret effect. This can generate a voltage between the two electrodes, and the thermopower can be higher than that of the electronic conductors because of the Seebeck effect by 1-2 orders in magnitude. The thermoelectric properties of ionic conductors depend on the ionic thermopower, ionic conductivity, and thermal conductivity. Compared with other ionic conductors, like liquid electrolytes and hydrogels, ionogels made of an ionic liquid and a gelator can have the advantages of high thermopower and high stability. Great progress was recently made to improve the ionic conductivity and/or ionic thermopower of ionogels. They can be used in ionic thermoelectric capacitors (ITECs) to harvest heat. In addition, they can be integrated with electronic thermoelectric materials to harvest heat from both temperature gradient and temperature fluctuation, which can be caused by waste heat.

Stretchable and Self-Adhesive PEDOT:PSS Blend with High Sweat Tolerance as Conformal Biopotential Dry Electrodes.

Dry epidermal electrodes that can always form conformal contact with skin can be used for continuous long-term biopotential monitoring, which can provide vital information for disease diagnosis and rehabilitation. But, this application has been limited by the poor contact of dry electrodes on wet skin. Herein, we report a biocompatible fully organic dry electrode that can form conformal contact with both dry and wet skin even during physical movement. The dry electrodes are prepared by drop casting an aqueous solution consisting of poly(3,4-ethylenedioxythiophene):polystyrenesulfonate (PEDOT:PSS), poly(vinyl alcohol) (PVA), tannic acid (TA), and ethylene glycol (EG). The electrodes can exhibit a conductivity of 122 S cm-1 and a mechanical stretchability of 54%. Moreover, they are self-adhesive to not only dry skin but also wet skin. As a result, they can exhibit a lower contact impedance to skin than commercial Ag/AgCl gel electrodes on both dry and sweat skins. They can be used as dry epidermal electrodes to accurately detect biopotential signals including electrocardiogram (ECG) and electromyogram (EMG) on both dry and wet skins for the users at rest or during physical movement. This is the first time to demonstrate dry epidermal electrodes self-adhesive to wet skin for accurate biopotential detection.

Role of Ions in Hydrogels with an Ionic Seebeck Coefficient of 52.9 mV K-1.

Ionic thermoelectric (i-TE) material with mobile ions as charge carriers has the potential to generate large thermal voltages at low operating temperatures. This study highlights the role of ions in i-TE hydrogels employing a poly(vinyl alcohol) (PVA) polymer matrix and a number of ion providers, e.g., KOH, KNO3, KCl, KBr, NaI, KI, and CsI. The relationship between the intrinsic physical parameters of the ion and the thermoelectric performance is established, indicating the ability to influence the hydrogen bond by the ion is a crucial factor. Among these i-TE hydrogels, the PVA/CsI hydrogel exhibits the largest ionic Seebeck coefficient, reaching 52.9 mV K-1, which is the largest of all i-TE materials reported to date. In addition, our work demonstrates the influence of ions on polymer configuration and provides an avenue for ion selection in the Soret effect in ionic thermoelectrics.

CBCT-based synthetic CT generation using generative adversarial networks with disentangled representation.

BACKGROUND: Cone-beam computed tomography (CBCT) plays a key role in image-guided radiotherapy (IGRT), however its poor image quality limited its clinical application. In this study, we developed a deep-learning based approach to translate CBCT image to synthetic CT (sCT) image that preserves both CT image quality and CBCT anatomical structures. METHODS: A novel synthetic CT generative adversarial network (sCTGAN) was proposed for CBCT-to-CT translation via disentangled representation. The approach of disentangled representation was employed to extract the anatomical information shared by CBCT and CT image domains. Both on-board CBCT and planning CT of 40 patients were used for network learning and those of another 12 patients were used for testing. Accuracy of our network was quantitatively evaluated using a series of statistical metrics, including the peak signal-to-noise ratio (PSNR), mean structural similarity index (SSIM), mean absolute error (MAE), and root-mean-square error (RMSE). Effectiveness of our network was compared against three state-of-the-art CycleGAN-based methods. RESULTS: The PSNR, SSIM, MAE, and RMSE between sCT generated by sCTGAN and deformed planning CT (dpCT) were 34.12 dB, 0.86, 32.70 HU, and 60.53 HU, while the corresponding values between original CBCT and dpCT were 28.67 dB, 0.64, 70.56 HU, and 112.13 HU. The RMSE (60.53±14.38 HU) of sCT generated by sCTGAN was less than that of sCT generated by all the three comparing methods (72.40±16.03 HU by CycleGAN, 71.60±15.09 HU by CycleGAN-Unet512, 64.93±14.33 HU by CycleGAN-AG). CONCLUSIONS: The sCT generated by our sCTGAN network was closer to the ground truth (dpCT), in comparison to all the three comparing CycleGAN-based methods. It provides an effective way to generate high-quality sCT which has a wide application in IGRT and adaptive radiotherapy.

Self-Adhesive, Stretchable, Biocompatible, and Conductive Nonvolatile Eutectogels as Wearable Conformal Strain and Pressure Sensors and Biopotential Electrodes for Precise Health Monitoring.

Conductive stretchable hydrogels and ionogels consisting of ionic liquids can have interesting application as wearable strain and pressure sensors and bioelectrodes due to their soft nature and high conductivity. However, hydrogels have a severe stability problem because of water evaporation, whereas ionogels are not biocompatible or even toxic. Here, we demonstrate self-adhesive, stretchable, nonvolatile, and biocompatible eutectogels that can always form conformal contact to skin even during body movement along with their application as wearable strain and pressure sensors and biopotential electrodes for precise health monitoring. The eutectogels consist of a deep eutectic solvent that has high conductivity, waterborne polyurethane that is an elastomer, and tannic acid that is an adhesive. They can have an elongation at a break of 178%, ionic conductivity of 0.22 mS/cm, and adhesion force of 12.5 N/m to skin. They can be used as conformal strain sensors to accurately monitor joint movement and breath. They can be even used as pressure sensors with a piezoresistive sensitivity of 284.4 kPa-1 to precisely detect subtle physical movements like arterial pulses, which can provide vital cardiovascular information. Moreover, the eutectogels can be used as nonvolatile conformal electrodes to monitor epidermal physiological signals, such as electrocardiogram (ECG) and electromyogram (EMG).

Biocompatible Conductive Polymers with High Conductivity and High Stretchability.

Stretchable electronic materials have drawn strong interest due to their important applications in areas such as bioelectronics, wearable devices, and soft robotics. The stretchable electrode is an integral unit of stretchable systems. Intrinsically conductive polymers such as poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) can have high mechanical flexibility and good biocompatibility. However, their electrical conductivity and mechanical stretchability should be greatly improved for its applications as the stretchable electrode. Here, we report highly conductive and highly stretchable PEDOT:PSS by incorporating biocompatible d-sorbitol. d-Sorbitol can serve as both the secondary dopant and plasticizer for PEDOT:PSS. It can not only significantly improve the conductivity but also the stretchability. d-Sorbitol-PEDOT:PSS (s-PEDOT:PSS) can have a conductivity of >1000 S/cm, and the conductivity could be maintained at a strain up to 60%. The resistance of s-PEDOT:PSS remains almost constant during repeated stretching-releasing cycles. The mechanism for the stretchability improvement by d-sorbitol is ascribed to the softening of PSSH chains. d-Sorbitol can position among the PSSH chains and thus destructs the hydrogen bonds among the PSSH chains. This makes the conformational change of the PSSH chains under stress become easy and thus increases the mechanical flexibility of PEDOT:PSS. This conductivity is the highest for biocompatible intrinsically conductive polymers with high stretchability.

Recent Development of Thermoelectric Polymers and Composites.

Thermoelectric materials can be used as the active materials in thermoelectric generators and as Peltier coolers for direct energy conversion between heat and electricity. Apart from inorganic thermoelectric materials, thermoelectric polymers have been receiving great attention due to their unique advantages including low cost, high mechanical flexibility, light weight, low or no toxicity, and intrinsically low thermal conductivity. The power factor of thermoelectric polymers has been continuously rising, and the highest ZT value is more than 0.25 at room temperature. The power factor can be further improved by forming composites with nanomaterials. This article provides a review of recent developments on thermoelectric polymers and polymer composites. It focuses on the relationship between thermoelectric properties and the materials structure, including chemical structure, microstructure, dopants, and doping levels. Their thermoelectric properties can be further improved to be comparable to inorganic counterparts in the near future.