Hydrophobic interaction chromatography in continuous flow-through mode for product-related variant removal.

Product-related impurities are challenging to remove during monoclonal antibody (mAb) purification process due to molecular similarity. Frontal chromatography on hydrophobic interaction resins has demonstrated its capability to effectively remove such impurities. However, process improvements geared towards purity level comes as a trade-off with the yield loss. In this work, we present a hydrophobic interaction chromatography process using multicolumn continuous chromatography (MCC) concept and frontal analysis to remove a high prevalence product related impurity. This design uses a two-column continuous system where the two columns are directly connected during product chase step to capture product wash loss without any in-process adjustment. This polish MCC operation resulted in a 10 % increase in yield while maintaining 99 % purity, despite the presence of 20 % product-related impurities in the feed material. One challenge associated with polish MCC design is that the accumulation of the impurities renders a non-steady state recycling. To surmount this issue and ensure a robust process, a mechanistic model was developed and validated to predict multicomponent breakthrough. This model was capable to predict multiple cycle behavior and accounts for increased impurity concentration. Assisted by the model, the optimized operation parameters and conditions can be determined to account for variation in product load quality. The simulated results demonstrate an effective doubling of productivity compared to conventional batch chromatography.

Ion Mobility-Mass Spectrometry and Collision-Induced Unfolding Rapidly Characterize the Structural Polydispersity and Stability of an Fc-Fusion Protein.

Fc-fusion proteins are an emerging class of protein therapeutics that combine the properties of biological ligands with the unique properties of the fragment crystallizable (Fc) domain of an immunoglobulin G (IgG). Due to their diverse higher-order structures (HOSs), Fc-fusion proteins remain challenging characterization targets within biopharmaceutical pipelines. While high-resolution biophysical tools are available for HOS characterization, they frequently demand extended time frames and substantial quantities of purified samples, rendering them impractical for swiftly screening candidate molecules. Herein, we describe the development of ion mobility-mass spectrometry (IM-MS) and collision-induced unfolding (CIU) workflows that aim to fill this technology gap, where we focus on probing the HOS of a model Fc-Interleukin-10 (Fc-IL-10) fusion protein engineered using flexible glycine-serine linkers. We evaluate the ability of these techniques to probe the flexibility of Fc-IL-10 in the absence of bulk solvent relative to other proteins of similar size, as well as localize structural changes of low charge state Fc-IL-10 ions to specific Fc and IL-10 unfolding events during CIU. We subsequently apply these tools to probe the local effects of glycine-serine linkers on the HOS and stability of IL-10 homodimer, which is the biologically active form of IL-10. Our data reveals that Fc-IL-10 produces significantly more structural transitions during CIU and broader IM profiles when compared to a wide range of model proteins, indicative of its exceptional structural dynamism. Furthermore, we use a combination of enzymatic approaches to annotate these intricate CIU data and localize specific transitions to the unfolding of domains within Fc-IL-10. Finally, we detect a strong positive, quadratic relationship between average linker mass and fusion protein stability, suggesting a cooperative influence between glycine-serine linkers and overall fusion protein stability. This is the first reported study on the use of IM-MS and CIU to characterize HOS of Fc-fusion proteins, illustrating the practical applicability of this approach.

Ion Mobility-Mass Spectrometry and Collision-Induced Unfolding of Designed Bispecific Antibody Therapeutics.

Bispecific antibodies (bsAbs) represent a critically important class of emerging therapeutics capable of targeting two different antigens simultaneously. As such, bsAbs have been developed as effective treatment agents for diseases that remain challenging for conventional monoclonal antibody (mAb) therapeutics to access. Despite these advantages, bsAbs are intricate molecules, requiring both the appropriate engineering and pairing of heavy and light chains derived from separate parent mAbs. Current analytical tools for tracking the bsAb construction process have demonstrated a limited ability to robustly probe the higher-order structure (HOS) of bsAbs. Native ion mobility-mass spectrometry (IM-MS) and collision-induced unfolding (CIU) have proven to be useful tools in probing the HOS of mAb therapeutics. In this report, we describe a series of detailed and quantitative IM-MS and CIU data sets that reveal HOS details associated with a knob-into-hole (KiH) bsAb model system and its corresponding parent mAbs. We find that quantitative analysis of CIU data indicates that global KiH bsAb stability occupies an intermediate space between the stabilities recorded for its parent mAbs. Furthermore, our CIU data identify the hole-containing half of the KiH bsAb construct to be the least stable, thus driving much of the overall stability of the KiH bsAb. An analysis of both intact bsAb and enzymatic fragments allows us to associate the first and second CIU transitions observed for the intact KiH bsAb to the unfolding Fab and Fc domains, respectively. This result is likely general for CIU data collected for low charge state mAb ions and is supported by data acquired for deglycosylated KiH bsAb and mAb constructs, each of which indicates greater destabilization of the second CIU transition observed in our data. When integrated, our CIU analysis allows us to link changes in the first CIU transition primarily to the Fab region of the hole-containing halfmer, while the second CIU transition is likely strongly connected to the Fc region of the knob-containing halfmer. Taken together, our results provide an unprecedented road map for evaluating the domain-level stabilities and HOS of both KiH bsAb and mAb constructs using CIU.

Role of harvest depth filtration in controlling product-related impurities for a bispecific antibody.

Background: Bispecific antibodies (BsAb) belong to a novel antibody category with advantages over traditional mono-specific therapeutic antibodies. However, product variants are also commonly seen during the production of BsAb, which poses significant challenges to downstream processing. In this study, the adsorptive characteristics of a BsAb product and its variants were investigated for a set of depth filters during primary recovery of the cell culture fluid. Methods: The retention of the BsAb product and its variants on a set of Millistak+® D0HC and X0HC depth filters were first investigated, followed by studying the mechanism of their adsorption on the depth filters. The chemical and structural properties of depth filters along with the molecular properties of the product and its variants were studied subsequently. Results: The X0HC filter was found to be able to retain a significant amount of low molecular weight (LMW) variants along with a low amount of main product retained. Different levels of retention, observed for these variants, were correlated to their different hydrophobic and charge characteristics in relation with the adsorptive properties of the depth filters used. Electrostatic, hydrophobic, and hydrogen bonding interactions were found to be the key forces to keep product variants retained on the depth filter where the higher hydrophobicity of the LMW variants may cause them to be preferentially retained. Conclusion: Harvest depth filters potentially can be utilized for retaining the BsAb variants, which depends on relative molecular properties of the product and its variants and adsorptive properties of the depth filters used.

Assessing detergent-mediated virus inactivation, protein stability, and impurity clearance in biologics downstream processes.

Detergent-mediated virus inactivation (VI) provides a valuable orthogonal strategy for viral clearance in mammalian processes, in particular for next-generation continuous manufacturing. Furthermore, there exists an industry-wide need to replace the conventionally employed detergent Triton X-100 with eco-friendly alternatives. However, given Triton X-100 has been the gold standard for VI due its minimal impact on protein stability and high inactivation efficacy, inactivation by other eco-friendly detergents and its impact on protein stability is not well understood. In this study, the sugar-based detergent commonly used in membrane protein purification, n-dodecyl-ß- d-maltoside was found to be a promising alternative for VI. We investigated a panel of detergents to compare the relative VI efficacy, impact on therapeutic quality attributes, and clearance of the VI agent and other impurities through subsequent chromatographic steps. Detergent-mediated inactivation and protein stability showed comparable trends to low pH inactivation. Using experimental and modeling data, we found detergent-mediated product aggregation and its kinetics to be driven by extrinsic factors such as detergent and protein concentration. Detergent-mediated aggregation was also impacted by an initial aggregation level as well as intrinsic factors such as the protein sequence and detergent hydrophobicity, and critical micelle concentration. Knowledge gained here on factors driving product stability and VI provides valuable insight to design, standardize, and optimize conditions (concentration and duration of inactivation) for screening of detergent-mediated VI.

Characterizing and understanding the formation of cysteine conjugates and other by-products in a random, lysine-linked antibody drug conjugate.

This study describes the characterization of conjugation sites for a random, lysine conjugated 2-iminothiolane (2-IT) based antibody-drug-conjugate synthesized from an IgG1 antibody and a duocarmycin analog-based payload-linker. Of the 80 putative lysine sites, 78 were found to be conjugated via tryptic peptide mapping and LC-HRMS. Surprisingly, seven cysteine-linked conjugated peptides were also detected resulting from the conjugation of cysteine residues derived from the four inter-chain disulfide bonds during the reaction. This unexpected finding could be attributed to the free thiols of the 2-IT thiolated antibody intermediates and/or the 4-mercaptobutanamide by-product resulting from the hydrolysis of 2-IT. These free thiols could cause the four inter-chain disulfide bonds of the antibody to scramble via intra- or inter-molecular attack. The presence of only pair of non-reactive (unconjugated) lysine residues, along with the four intact intra-chain disulfide bonds, is attributed to their poor accessibility, which is consistent with solvent accessibility modeling analysis. We also discovered a major by-product derived from the hydrolysis of the amidine moiety of the N-terminus conjugate. In contrast, the amidine moiety in lysine-linked conjugates appeared stable. Based on our results, we propose plausible formation mechanisms of cysteine-linked conjugates and the hydrolysis of the N-terminus conjugate, which provide scientific insights that are beneficial to process development and drug quality control.

Impact of virus-antibody interactions on viral clearance in anion exchange chromatography.

Viral clearance is an important performance metric for the downstream process of monoclonal antibodies (mAbs) due to its impact on patient safety. Anion exchange chromatography (AEX) has been well-accepted in the industry as one of the workhorse techniques for removing viruses, and is considered to be able to achieve high log clearance values under most operating conditions. However, it is not uncommon for viral clearance results on AEX to fall below the desired level despite operating under conditions that should achieve high clearance levels according to conventional wisdom of how this mode of chromatography operates. In this study, a design of experiment (DoE) approach was used to develop a more fundamental understanding of viral clearance during AEX chromatography using Minute Virus of Mice (MVM) on POROS HQ resin. Load pH, conductivity and virus concentration were evaluated as design factors for three mAbs with varying physical and chemical properties. The hydrophobicity and surface charge distributions of the molecules were found to be the most significant factors in influencing viral clearance performance, and the viral clearance trends did not seem to fit with conventional wisdom. To explain this seemingly unconventional behavior, we propose a new mechanism that suggests that interactions between the mAb and the virus have a major contribution on retention of the virus on the resin. This furthered understanding may help improve the predictability, performance and robustness of viral clearance during AEX chromatography.

Investigation of anomalous charge variant profile reveals discrete pH-dependent conformations and conformation-dependent charge states within the CDR3 loop of a therapeutic mAb.

During the development of a therapeutic monoclonal antibody (mAb-1), the charge variant profile obtained by pH-gradient cation exchange chromatography (CEX) contained two main peaks, each of which exhibited a unique intrinsic fluorescence profile and demonstrated inter-convertibility upon reinjection of isolated peak fractions. Domain analysis of mAb-1 by CEX and liquid chromatography-mass spectrometry indicated that the antigen-binding fragment chromatographed as two separate peaks that had identical mass. Surface plasmon resonance binding analysis to antigen demonstrated comparable kinetics/affinity between these fractionated peaks and unfractionated starting material. Subsequent molecular modeling studies revealed that the relatively long and flexible complementarity-determining region 3 (CDR3) loop on the heavy chain could adopt two discrete pH-dependent conformations: an "open" conformation at neutral pH where the HC-CDR3 is largely solvent exposed, and a "closed" conformation at lower pH where the solvent exposure of a neighboring tryptophan in the light chain is reduced and two aspartic acid residues near the ends of the HC-CDR3 loop have atypical pKa values. The pH-dependent equilibrium between "open" and "closed" conformations of the HC-CDR3, and its proposed role in the anomalous charge variant profile of mAb-1, were supported by further CEX and hydrophobic interaction chromatography studies. This work is an example of how pH-dependent conformational changes and conformation-dependent changes to net charge can unexpectedly contribute to perceived instability and require thorough analytical, biophysical, and functional characterization during biopharmaceutical drug product development.

Cyclization of N-Terminal Glutamic Acid to pyro-Glutamic Acid Impacts Monoclonal Antibody Charge Heterogeneity Despite Its Appearance as a Neutral Transformation.

Pyroglutamic acid (pyroGlu) is commonly observed at the N-terminus of therapeutic monoclonal antibodies. Notably, the term "pyroGlu" refers to a single product that could originate from the cyclization of either an N-terminal glutamine or an N-terminal glutamic acid. This is an important and easily overlooked distinction that has major implications on the charge variant nature of a pyroGlu relative to its uncyclized form. Cyclization of an N-terminal glutamine for instance clearly produces an acidic variant with a lower isoelectric point owing to the loss of the positively charged N-terminal amine. In this report, we demonstrate that cyclization of an N-terminal glutamic acid on the other hand produces a basic variant with a higher isoelectric point contrary to the typical assumption that the simultaneous loss of the N-terminal amine and the carboxylic acid side-chain would negate the formation of a charge variant. The results of our investigation demonstrate the need to consider the relative strengths of the acidic and basic functional groups which are altered when assessing whether the product will be a charge variant. This study also adds new knowledge and experimental evidence to understand charge heterogeneity in monoclonal antibodies.

Streamlining the polishing step development process via physicochemical characterization of monoclonal antibody aggregates.

When developing purification processes for monoclonal antibodies (mAbs), ensuring the effective removal of high molecular weight (HMW) species is often challenging and labor intensive. In this work, we present a bottom-up characterization approach to achieve streamlined polishing step development as well as a more fundamental understanding of the protein of interest. Prior to physicochemical characterization, in-process HMW species of two IgG4 mAbs (mAb A and mAb B) were isolated via semi-preparative size exclusion chromatography (SEC). Key differences in approximate molecular weight, net charge, and native surface hydrophobicity were then identified using multi-angle light scattering (SEC-MALS), analytical-scale chromatographic screening, isoelectric focusing, and structural aggregation propensity modeling. SEC-MALS revealed two main HMW isoforms for each mAb: dimers and 1.7-mers for mAb A, and tetramers and dimers for mAb B. Analytical-scale chromatographic screening showed promising trends in charge-based separation for mAb A, and hydrophobic-based separation for mAb B. Isoelectric focusing data detected a 30% increase in acidic variants for mAb A HMW species relative to monomer, and a 20% increase in basic variants for mAb B HMW species. Lastly, analytical-scale characterization data was successfully applied to preparative scale purification conditions, producing results highly similar to those observed during analytical characterization of the isolated species. By using this high-throughput approach as a template for preparative-scale process development, key physicochemical differences between aggregate and monomer species were utilized to determine optimal polishing steps for HMW removal.

Quadrupole Dalton-Based Controlled Proteolysis Method for Characterization of Higher Order Protein Structure.

The higher order structure (HOS) of proteins plays a critical role in the efficacy and stability of biological drugs. Perturbation of the regional structure of proteins can affect biological activity and cause instability. Characterization of HOS has become an integral part of biological drug development and is expected from regulatory agencies. The commonly used techniques for HOS characterization, such as circular dichroism, Fourier-transform infrared, differential scanning calorimetry, intrinsic fluorescence, and hydrogen-deuterium exchange mass spectrometry, have their limitations ranging from lack of sensitivity and specificity to the need of high-level expertise and poor access to instrumentation due to high cost. In this study, we demonstrated a novel controlled proteolysis-based LC-QDa method for the detection of HOS change. By digesting proteins directly without denaturation and reduction, the HOS information can be revealed through the digested peptides. After optimizing the digestion conditions and the detection procedures, we identified 13 signature peptides that can monitor various antibody domains for any HOS changes caused by external stress. By comparing the peptide peak areas between unknown samples and a native control sample, any regional structural changes in unknown samples can be detected. The method was subsequently applied to a wide range of forced degradation samples to demonstrate higher sensitivity compared to the near-UV CD method that is frequently used for monitoring tertiary structural changes. By further reducing the number of signature peptides to five and optimizing liquid chromatography gradient duration, a streamlined, high-throughput, and controlled proteolysis method was successfully established. This method can be used to support process and formulation development as well as potentially for stability testing.

Probing the Tryptophan Environment in Therapeutic Proteins: Implications for Higher Order Structure on Tryptophan Oxidation.

Tryptophan (Trp) oxidation in proteins leads to a number of events, including changes in color, higher order structure (HOS), and biological activity. We describe here a number of new findings through a comprehensive characterization of 6 monoclonal antibodies (mAbs) following selective oxidation of Trp residues by 2,2'-azobis(2-amidinopropane) dihydrochloride. Fluorescence spectroscopy, in combination with second derivative analysis, demonstrates that the loss of Trp fluorescence intensity is a sensitive indicator of Trp oxidation in mAbs. Size-exclusion chromatography with UV and intrinsic Trp fluorescence detection was demonstrated to be a useful method to monitor Trp oxidation levels in mAbs. Furthermore, the Trp oxidation levels measured by size-exclusion chromatography with UV and intrinsic Trp fluorescence detection were found to be in agreement with the values obtained from tryptic peptide mapping by liquid chromatography with mass spectrometric detection and correlate with the total solvent accessible surface area of the exposed Trp residues from in silico modeling. Finally, near-UV circular dichroism and Raman spectroscopy were used to evaluate the impact of Trp oxidation on HOS and identify specific oxidation products, respectively. This work demonstrates that protein HOS is altered on Trp oxidation in mAbs and multiple spectroscopic markers can be used to monitor the molecule-dependent Trp oxidation behavior.

Enhanced Precision of Circular Dichroism Spectral Measurements Permits Detection of Subtle Higher Order Structural Changes in Therapeutic Proteins.

Protein higher order structure (HOS) is an essential quality attribute to ensure protein stability and proper biological function. Protein HOS characterization is performed during comparability assessments for product consistency as well as during forced degradation studies for structural alteration upon stress. Circular dichroism (CD) spectroscopy is a widely used technique for measuring protein HOS, but it remains difficult to assess HOS with a high degree of accuracy and precision. Moreover, once spectral changes are detected, interpreting the differences in terms of specific structural attributes is challenging. Spectral normalization by the protein concentration remains one of the largest sources of error and reduces the ability to confidently detect differences in CD spectra. This work develops a simple method to enhance the precision of the CD spectral measurements through normalization of the CD spectra by the protein concentration determined directly from the CD measurement. This method is implemented to successfully detect small CD spectral changes in multiple forced degradation studies as well as comparability assessments during biologics drug development. Furthermore, the interpretation of CD spectral changes in terms of HOS differences are provided based on orthogonal data in conjunction with structural insights gained through in silico homology modeling of the protein structure.

Purity Determination by Capillary Electrophoresis Sodium Hexadecyl Sulfate (CE-SHS): A Novel Application For Therapeutic Protein Characterization.

Capillary gel electrophoresis using sodium dodecyl sulfate (CE-SDS) is used commercially to provide quantitative purity data for therapeutic protein characterization and release. In CE-SDS, proteins are denatured under reducing or nonreducing conditions in the presence of SDS and electrophoretically separated by molecular weight and hydrodynamic radius through a sieving polymer matrix. Acceptable performance of this method would yield protein peaks that are baseline resolved and symmetrical. Nominal CE-SDS conditions and parameters are not optimal for all therapeutic proteins, specifically for Recombinant Therapeutic Protein-1 (RTP-1), where acceptable resolution and peak symmetry were not achieved. The application of longer alkyl chain detergents in the running buffer matrix substantially improved assay performance. Matrix running buffer containing sodium hexadecyl sulfate (SHS) increased peak resolution and plate count 3- and 8-fold, respectively, compared to a traditional SDS-based running gel matrix. At Bristol-Myers Squibb (BMS), we developed and qualified a viable method for the characterization and release of RTP-1 using an SHS-containing running buffer matrix. This work underscores the potential of detergents other than SDS to enhance the resolution and separation power of CE-based separation methods.

Insights in understanding aggregate formation and dissociation in cation exchange chromatography for a structurally unstable Fc-fusion protein.

Cation-exchange chromatography (CEX) of a structurally unstable Fc-fusion protein exhibited multi-peak elution profile upon a salt-step elution due to protein aggregation during intra-column buffer transition where low pH and high salt coexisted. The protein exhibited a single-peak elution behavior during a pH-step elution; nevertheless, the levels of soluble aggregates (i.e. high molecular weight species, HMW) in the CEX eluate were still found up to 12-fold higher than that for the load material. The amount of the aggregates formed upon the pH-step elution was dependent on column loading with maximum HMW achieved at intermediate loading levels, supporting the hypothesis that the aggregation was the result of both the conformational changes of the bound protein and the solution concentration of the aggregation-susceptible proteins during elution. Factors such as high load pH, short protein/resin contact time, hydrophilic resin surface, and weak ionizable ligand were effective, to some extent, to reduce aggregate formation by improving the structural integrity of the bound protein. An orthogonal technique, differential scanning fluorimetry (DSF) using Sypro Orange dye confirmed that the bound protein exposed more hydrophobic area than the native molecule in free solution, especially in the pH 4-5 range. The Sypro Orange dye study of resin surface property also demonstrated that the poly[styrene-divinylbenzene]-based Poros XS with polyhydroxyl surface coating is more hydrophobic compared to the agarose-based CM Sepharose FF and SP Sepharose FF. The hydrophobic property of Poros XS contributed to stronger interactions with the partially unfolded bound protein and consequently to the higher aggregate levels seen in Poros XS eluate. This work also investigates the aggregation reversibility in CEX eluate where up to 66% of the aggregates were observed to dissociate into native monomers over a period of 120h, and links the aggregate stability to such conditions as resin surface properties and charged ligand type. Experimental data was correlated semi-quantitatively with theoretical protein charge and hydrophobicity calculations using homology modeling within the BIOVIA Discovery Studio software. Finally, an arginine-sulphopropyl (Arg-SP) agarose resin immobilized with multi-functional ligands was prepared to verify the proposed hypothesis and to eliminate the aggregate formation. The findings of this work provide general insights in understanding aggregate formation and dissociation for structurally unstable proteins in the CEX step.

Modeling the oxidation of methionine residues by peroxides in proteins.

We report the use of molecular modeling to predict the oxidation propensity of methionine residues in proteins. Oxidation of methionine to the sulfoxide form is one of the major degradation pathways for therapeutic proteins. Oxidation can occur during production, formulation, or storage of pharmaceuticals and it often reduces or eliminates biological activity. We use a molecular model based on atomistic simulations called 2-shell water coordination number to predict the oxidation rates for several model proteins and therapeutic candidates. In addition, we implement models that are based on static and simulation average of the solvent-accessible area (SAA) for either the side chain or the sulfur atom in the methionine residue. We then compare the results from the different models against the experimentally measured relative rates of methionine oxidation. We find that both the 2-shell model and the simulation-averaged SAA models are accurate in predicting the oxidation propensity of methionine residues for the proteins tested. We also find the appropriate parameter ranges where the models are most accurate. These models have significant predictive power and can be used to enable further protein engineering or to guide formulation approaches in stabilizing the unstable methionine residues.

Developability index: a rapid in silico tool for the screening of antibody aggregation propensity.

Determining the aggregation propensity of protein-based biotherapeutics is an important step in the drug development process. Typically, a great deal of data collected over a large period of time is needed to estimate the aggregation propensity of biotherapeutics. Thus, candidates cannot be screened early on for aggregation propensity, but early screening is desirable to help streamline drug development. Here, we present a simple molecular computational method to predict the aggregation propensity via hydrophobic interactions, thought to be the most common mechanism of aggregation, and electrostatic interactions. This method uses a new quantity termed Developability Index. It is a function of an antibody's net charge, calculated on the full-length antibody structure, and the spatial aggregation propensity, calculated on the complementarity-determining region structure. Its accuracy is due to the molecular level details and the incorporation of the tertiary structure of the antibody. It is particularly applicable to antibodies or other proteins for which structures are available or could be determined accurately using homology modeling. Applications include the selection of molecules in the discovery or early development process, selection of mutants for stability, and estimation of resources needed for development of a given biomolecule.

A screening tool for therapeutic monoclonal antibodies: Identifying the most stable protein and its best formulation based on thioflavin T binding.

The lack of a fast selection method to identify the most stable protein is one of the major challenges for developing successful therapeutic protein formulations more rapidly. The swift and accurate detection of small amounts of aggregates is another problem since aggregates may trigger an immunological response and the aggregation decreases the biological activity of the antibody. Here we present an alternative method for initial screening of the aggregation propensity of proteins, using monoclonal antibodies (mAb) as an example and thioflavin T (ThT) binding. The major advantage of ThT binding is the short duration of testing compared with size-exclusion chromatography (SEC) measurements that can take 6 months or more even under accelerated conditions. The tendency to aggregate of each therapeutic human mAb probed with the ThT assay, together with SEC, is employed to formulate the ranking of mAb aggregation. ThT binding can determine the propensity of proteins to aggregate in a few days, illustrating that ThT binding would be a valuable screening tool.

Conformational stability and aggregation of therapeutic monoclonal antibodies studied with ANS and Thioflavin T binding.

Characterization of aggregation profiles of monoclonal antibodies (mAb) is gaining importance because an increasing number of mAb-based therapeutics are entering clinical studies and gaining marketing approval. To develop a successful formulation, it is imperative to identify the critical biochemical properties of each potential mAb drug candidate. We investigated the conformational change and aggregation of a human IgG1 using external dye-binding experiments with fluorescence spectroscopy and compared the aggregation profiles obtained to the results of size-exclusion chromatography. We show that using an appropriate dye at selected mAb concentration, unfolding or aggregation can be studied. In addition, dye-binding experiments may be used as conventional assays to study therapeutic mAb stability.

Prediction of protein binding regions.

Identifying protein binding sites provides important clues to the function of a protein. Experimental methods to identify the binding sites such as determining the crystal structures of protein complexes are extremely laborious and expensive. Here, we present a computational technique called spatial aggregation propensity (SAP) based on molecular simulations to predict protein binding sites. We apply this technique to two model proteins, an IgG1 antibody and epidermal growth factor receptor (EGFR) and demonstrate that SAP predicts protein binding regions with very good accuracy. In the case of the IgG1 antibody, SAP accurately predicts binding regions with the Fc-receptor, protein-A, and protein-G. For EGFR, SAP accurately predicts binding regions with EGF, TGFα, and with another EGFR. The resolution of SAP is varied to obtain a detailed picture of these binding sites. We also show that some of these binding sites overlap with protein self-aggregation prone regions. We demonstrate how SAP analysis can be used to engineer the protein to remove unfavorable aggregation prone regions without disturbing protein binding regions. The SAP technique could be also used to predict the yet unknown binding sites of numerous proteins, thereby providing clues to their function.