Green Synthesis of the Triazine Derivatives and their Application for the Benign Electrocatalytic Reaction of Nitrate Reduction to Ammonia.

This work uses green sustainable reactions twice. Firstly, it is microwave synthesis: 2,4,6-tribiphenyl-4-yl-1,3,5-triazine and similar compounds were prepared in a closed microwave reactor in n-octane by the Friedel-Crafts reaction. Second, a hybrid electrocatalyst for the highly demanded electrochemical reaction of nitrate reduction to ammonia (NO3RR) was prepared based on this material. This reaction has great potential to replace the energy-intensive Haber-Bosch process, and in addition, has independent value for the elimination of nitrate contamination of water resources. As shown in the work, microwave synthesis is an eco-friendly method for the synthesis of complex organic compounds; fast, selective and with a high yield of the target product. The electrocatalyst deposited on the graphite electrode consisted of a layer of 2,4,6-tribiphenyl-4-yl-1,3,5-triazine and related compounds coated with cobalt oxide. The hybrid catalyst was firmly retained on the graphite electrode during NO3RR and the material showed impressive stability with almost no decrease in catalytic activity even after the fifth cycle. Both 2,4,6-tribiphenyl-4-yl-1,3,5-triazine and the catalyst based on this substance were characterized by SEM, XPS, XRD, UV-vis spectra, cyclic (and linear) voltammetry, and chronoamperometry. This work can serve as a starting point for the development of stable and durable electrocatalysts for NO3RR using triazine derivatives.

Ammonium Polyuranates: Old Dog, New Structural Tricks.

The crystal structure of ammonium polyuranates xUO3·yNH3·zH2O has been investigated. Powder X-ray diffraction (PXRD) has been employed to define single-phase samples within a series of synthesized compounds, which are further characterized by elemental analysis to ascertain the stoichiometry, revealing compositions of 3UO3·NH3·5H2O and 2UO3·NH3·3H2O. Analysis using extended X-ray absorption fine structure and vibrational spectroscopy has elucidated that both 3UO3·NH3·5H2O and 2UO3·NH3·3H2O possess a local structure similar to the metaschoepite─layered U(VI) oxohydroxide UO3·2H2O, but with H2O and NH4+ groups in the interlayers. The structures of ammonium polyuranates are solved from PXRD data, revealing their relationship to the U(VI) oxohydroxide with the established composition of NH4[(UO2)3O2(OH)3]·3H2O and NH4[(UO2)2O2(OH)]·2H2O for 3UO3·NH3·5H2O and 2UO3·NH3·H2O, respectively. These structures maintain the arrangement of U-O polyhedra as pentagonal bipyramids. However, disparities in lattice parameters, space group, and layer topology from UO3·2H2O emphasize significant structural modifications resulting from the substitution of water by ammonium. Moreover, the anion topology of the NH4[(UO2)2O2(OH)]·2H2O has no analogues among uranium oxohydroxide minerals. Notably, ammonium polyuranates, when compared, have minimal alterations in lattice parameters regardless of the presence of ammonia within the structure. The revealed results contribute valuable insights into the UO3-NH3-H2O system and hold potential applications in the field of nuclear power as ammonium polyuranates form during actinide precipitation in back-end of the nuclear fuel cycle and also serve as precursors in the fabrication of nuclear fuel.

Syntheses and Patterns of Changes in Structural Parameters of the New Quaternary Tellurides EuRECuTe3 (RE = Ho, Tm, and Sc): Experiment and Theory.

The layered orthorhombic quaternary tellurides EuRECuTe3 (RE = Ho, Tm, Sc) with Cmcm symmetry were first synthesized. Single crystals of the compounds up to 500 µm in size were obtained by the halide-flux method at 1120 K from elements taken in a ratio of Eu/RE/Cu/Te = 1:1:1:3. In the series of compounds, the changes in lattice parameters were in the ranges a = 4.3129(3)-4.2341(3) Å, b = 14.3150(9)-14.1562(9) Å, c = 11.2312(7)-10.8698(7) Å, V = 693.40(8)-651.52(7) Å3. In the structures, the cations Eu2+, RE3+ (RE = Ho, Tm, Sc), and Cu+ occupied independent crystallographic positions. The structures were built with distorted copper tetrahedra forming infinite chains [CuTe4]7- and octahedra [RETe6]9- forming two-dimensional layers along the a-axis. These coordination polyhedra formed parallel two-dimensional layers CuRETe32-∞2. Between the layers, along the a-axis, chains of europium trigonal prisms [EuTe6]10- were located. Regularities in the variation of structural parameters and the degree of distortion of coordination polyhedra depending on the ionic radius of the rare-earth metal in the compounds EuRECuCh3 (RE = Ho, Er, Tm, Lu, Sc; Ch = S, Se, Te) were established. It is shown that with a decrease in the ionic radius ri(RE3+) in the compounds EuRECuTe3, the unit-cell volume, bond length d(RE-Te), distortion degree [CuTe4]7-, and crystallographic compression of layers [RECuTe3]2- decreased. The distortion degree of tetrahedral polyhedra [CuCh4]7-, as well as the structural parameters in europium rare-earth copper tellurides EuRECuTe3, were higher than in isostructural quaternary chalcogenides. Ab initio calculations of the crystalline structure, phonon spectrum, and elastic properties of compounds EuRECuTe3 (RE = Ho, Tm, and Sc) ere conducted. The types and wave numbers of fundamental modes were determined, and the involvement of ions in IR and Raman modes was assessed. The calculated data of the crystal structure correlated well with the experimental results.

Application of mixed phosphorus/sulfur ligands based on terpenoids in Pd-catalyzed asymmetric allylic substitution and Rh-catalyzed hydrogenation.

A small library of easily prepared diamidophosphite-sulfides based on 1,3-thioether alcohols, primarily of terpenoid nature, was developed. Upon complexation with Pd(II) ions, these hemilabile ligands showed the ability to form both P,S-chelates and complexes with two ligands P-monodentately bonded to the metal. The structures of the ligands and their complexes were determined by 2D NMR spectroscopy and X-ray diffraction. The use of these stereoselectors provided up to 95% ee in the classic Pd-catalyzed asymmetric allylic substitution reactions of (E)-1,3-diphenylallyl acetate with C- and N-nucleophiles and up to 80% ee in the Pd-mediated allylic alkylation of cinnamyl acetate with ß-ketoesters. In addition, ee values of up to 90% with quantitative conversion were achieved in the Rh-catalyzed asymmetric hydrogenation of methyl esters of unsaturated acids. The effects of the structural parameters, reaction conditions and ligand-to-metal ratio on the catalytic results are discussed.

Synthesis, Crystal Structure, and Optical and Magnetic Properties of the New Quaternary Erbium Telluride EuErCuTe3: Experiment and Calculation.

This paper reports for the first time on a new layered magnetic heterometallic erbium telluride EuErCuTe3. Single crystals of the compound were obtained from the elements at 1120 K using CsI as a flux. The crystal structure of EuErCuTe3 was solved in the space group Cmcm (a = 4.3086(3) Å, b = 14.3093(9) Å, and c = 11.1957(7) Å) with the KZrCuS3 structure type. In the orthorhombic structure of erbium telluride, distorted octahedra ([ErTe6]9-) form two-dimensional layers (Er(Te1)2/2e(Te2)4/2k-)∞2, while distorted tetrahedra ([CuTe4]7-) form one-dimensionally connected substructures (Cu(Te1)2/2e(Te2)2/1t5-∞1) along the [100] direction. The distorted octahedra and tetrahedra form parallel two-dimensional layers (CuErTe32-∞2) between which Eu2+ ions are located in a trigonal-prismatic coordination environment (EuTe610-). The trigonal prisms are connected by faces, forming chains (Eu(Te1)2/2(Te2)4/22-∞1) along the [100] direction. Regularities in the variations in structural parameters were established in the series of erbium chalcogenides (EuErCuCh3 with Ch = S, Se, and Te) and tellurides (EuLnCuTe3 with Ln = Gd, Er, and Lu). Ab-initio calculations of the crystal structure, phonon spectrum, and elastic properties of the compound EuErCuTe3 were performed. The types and wavenumbers of fundamental modes were determined, and the involvement of ions in the IR and Raman modes was assessed. The experimental Raman spectra were interpreted. The telluride EuErCuTe3 at temperatures below 4.2 K was ferrimagnetic, as were the sulfide and selenide derivatives (EuErCuCh3 with Ch = S and Se). Its experimental magnetic characteristics were close to the calculated ones. The decrease in the magnetic phase transition temperature in the series of the erbium chalcogenides was discovered.

Mechanosynthesis of Stable Salt Hydrates of Allopurinol with Enhanced Dissolution, Diffusion, and Pharmacokinetics.

Allopurinol (ALO) is a medication that treats gout and kidney stones by lowering uric acid synthesis in the blood. The biopharmaceutics classification system (BCS) IV drug exhibits poor aqueous solubility, permeability, and bioavailability. To overcome the bottlenecks of ALO, salts with maleic acid (MLE) and oxalic acid (OXA) were synthesized using the solvent-assisted grinding method. The novel multicomponent solids were characterized by PXRD, DSC, TGA, FT-IR, and SEM images. The crystal structures of these salts with variable stoichiometry were obtained using Rietveld refinement from the high-resolution PXRD data. The proton from the dicarboxylic acid is transferred to the most basic pyrimidine "N" of ALO. The N-H···N hydrogen-bonded ALO homodimer is replaced by the N+-H···O- ionic interactions in ALO-OXA (2:1:0.4) and ALO-MLE (1:1:1) salt hydrates. The organic salts improved solubility and dissolution up to 5-fold and the diffusion permeability up to 12 times compared to the native drug in a luminal pH 6.8 phosphate buffer medium. The salt hydrates were exceptionally stable during storage at 30 ± 5 °C and 75 ± 5% relative humidity. Superior dissolution and diffusion permeability of the ALO-MLE salt resulted in improved pharmacokinetics (peak plasma concentration) that offers a promising solid dosage form with enhanced bioavailability and lower dosage formulation.

Pyrrolo[2,3-e]indazole as a novel chemotype for both influenza A virus and pneumococcal neuraminidase inhibitors.

Influenza infections are often exacerbated by secondary bacterial infections, primarily caused by Streptococcus pneumoniae. Both respiratory pathogens have neuraminidases that support infection. Therefore, we hypothesized that dual inhibitors of viral and bacterial neuraminidases might be an advantageous strategy for treating seasonal and pandemic influenza pneumonia complicated by bacterial infections. By screening our in-house chemical library, we discovered a new chemotype that may be of interest for a further campaign to find small molecules against influenza. Our exploration of the pyrrolo[2,3-e]indazole space led to the identification of two hit compounds, 6h and 12. These molecules were well-tolerated by MDCK cells and inhibited the replication of H3N2 and H1N1 influenza A virus strains. Moreover, both compounds suppress viral and pneumococcal neuraminidases indicating their dual activity. Given its antiviral activity, pyrrolo[2,3-e]indazole has been identified as a promising scaffold for the development of novel neuraminidase inhibitors that are active against influenza A virus and S. pneumoniae.

An anionic porphyrinylphosphonate-based hydrogen-bonded organic framework: optimization of proton conductivity through the exchange of counterions.

Hydrogen-bonded organic frameworks (HOFs) possessing high crystallinity, simple synthetic procedure and easy regeneration provide high efficiency as multifunctional systems, including applications as proton conductors. Porphyrinylphosphonates having acidic moieties, which can form multiple hydrogen bonds, together with tunable physical-chemical properties of a macrocycle may significantly improve the proton conductivity of such materials. Herein, the synthesis, characterization and proton-conducting properties of a novel anionic HOF based on a new complex of palladium(II) with meso-tetrakis(4-(phosphonatophenyl))porphyrin, HOF-IPCE-1Pd, are reported. Directed structural transformation of the framework by the exchange of dimethylammonium counterions for ammonium cations along with the absorption of ammonia and water molecules led to the formation of a more hydrolytically stable structure of HOF-IPCE-1Pd-NH3, demonstrating the proton conductivity of 1.27 × 10-3 S cm-1 at 85 °C and 85% RH, which is one of the highest among all known HOFs based on porphyrins. It is noteworthy that the reversible absorbance of water/ammonia molecules preserves the crystal structure of HOF-IPCE-1Pd-NH3.

A Promising 1,3,5-Triazine-Based Anion Exchanger for Perrhenate Binding: Crystal Structures of Its Chloride, Nitrate and Perrhenate Salts.

The reaction of pyridine with cyanuric chloride was studied under microwave activation as well as in the presence of silver nitrate. The product of hydrolysis containing two pyridinium rings and chloride anion was isolated. The structures of these anion exchanger salts with chloride, nitrate and perrhenate anions are discussed.

Single Crystals of EuScCuSe3: Synthesis, Experimental and DFT Investigations.

EuScCuSe3 was synthesized from the elements for the first time by the method of cesium-iodide flux. The crystal belongs to the orthorhombic system (Cmcm) with the unit cell parameters a = 3.9883(3) Å, b = 13.2776(9) Å, c = 10.1728(7) Å, V = 538.70(7) Å3. Density functional (DFT) methods were used to study the crystal structure stability of EuScCuSe3 in the experimentally obtained Cmcm and the previously proposed Pnma space groups. It was shown that analysis of elastic properties as Raman and infrared spectroscopy are powerless for this particular task. The instability of EuScCuSe3 in space group Pnma space group is shown on the basis of phonon dispersion curve simulation. The EuScCuSe3 can be assigned to indirect wide-band gap semiconductors. It exhibits the properties of a soft ferromagnet at temperatures below 2 K.

Synthesis and the Crystal Structure of a New Chiral 1D Metal-Organic Coordination Polymer Based on L-Prolineamide-Substituted Diarylacetylenedicarboxylic Acid Derivative.

The new homochiral 1D metal-organic coordination polymer [Cu2(EDPB)•H2O]n was synthesized starting from the original 3,3'-ethyne-1,2-diylbis[6-(L-prolylamino)benzoic acid] (H4EDPB). The unique crystal structure of the new compound was established by powder X-ray diffraction. The [Cu2(EDPB)•H2O]n system shows catalytic activity and enantioselectivity in a Henry reaction of p-nitrobenzaldehyde with nitromethane.

A Challenge toward Novel Quaternary Sulfides SrLnCuS3 (Ln = La, Nd, Tm): Unraveling Synthetic Pathways, Structures and Properties.

We report on the novel heterometallic quaternary sulfides SrLnCuS3 (Ln = La, Nd, Tm), obtained as both single crystals and powdered samples. The structures of both the single crystal and powdered samples of SrLaCuS3 and SrNdCuS3 belong to the orthorhombic space group Pnma but are of different structural types, while both samples of SrTmCuS3 crystallize in the orthorhombic space group Cmcm with the structural type KZrCuS3. Three-dimensional crystal structures of SrLaCuS3 and SrNdCuS3 are formed from the (Sr/Ln)S7 capped trigonal prisms and CuS4 tetrahedra. In SrLaCuS3, alternating 2D layers are stacked, while the main backbone of the structure of SrNdCuS3 is a polymeric 3D framework [(Sr/Ln)S7]n, strengthened by 1D polymeric chains (CuS4)n with 1D channels, filled by the other Sr2+/Ln3+ cations, which, in turn, form 1D dimeric ribbons. A 3D crystal structure of SrTmCuS3 is constructed from the SrS6 trigonal prisms, TmS6 octahedra and CuS4 tetrahedra. The latter two polyhedra are packed together into 2D layers, which are separated by 1D chains (SrS6)n and 1D free channels. In both crystal structures of SrLaCuS3 obtained in this work, the crystallographic positions of strontium and lanthanum were partially mixed, while only in the structure of SrNdCuS3, solved from the powder X-ray diffraction data, were the crystallographic positions of strontium and neodymium partially mixed. Band gaps of SrLnCuS3 (Ln = La, Nd, Tm) were found to be 1.86, 1.94 and 2.57 eV, respectively. Both SrNdCuS3 and SrTmCuS3 were found to be paramagnetic at 20-300 K, with the experimental magnetic characteristics being in good agreement with the corresponding calculated parameters.

Understanding the Working Mechanism of the Novel HKUST-1@BPS Composite Materials as Stationary Phases for Liquid Chromatography.

Composite materials have been used based on coordination polymers or microporous metal-organic frameworks (MOFs) combined with mesoporous matrices for adsorption-related techniques, which enable outflanking some adverse phenomena manifested during pristine components operation and enhance the performance and selectivity of the resulting materials. In this work, for the first time, the novel HKUST-1@BPS composites synthesized by the microwave-assisted (MW) technique starting from microporous HKUST-1 (Cu3(btc)2) MOF and biporous silica matrix (BPS) with bimodal mesopore size distribution were comparatively studied as materials for liquid-phase adsorption techniques utilizing the high-performance liquid chromatography (HPLC) method and benzene as a model adsorbate. It was established that the studied HKUST-1@BPS composites can function as stationary phases for HPLC, unlike the pristine HKUST-1 and bare BPS materials, due to the synergetic effect of both components based on the preliminary enhanced adsorbate mass transfer throughout the silica mesopores and, subsequently, its penetrating into HKUST-1 micropores. The suggested mechanism involves the initial deactivation of open metal Cu2+ sites in the HKUST-1 framework structure by isopropanol molecules upon adding this polar component into the mobile phase in the region of the isopropanol concentration of 0.0 to 0.2 vol.%. Thereafter, at the medium range of varying the isopropanol concentration in the eluent of 0.2 to 0.3 vol.%, there is an expansion of the previously inaccessible adsorption centers in the HKUST-1@BPS composites. Subsequently, while further increasing the isopropanol volume fraction in the eluent in the region of 0.3 to 5.0 vol.%, the observed behavior of the studied chromatographic systems is similar to the quasi-normal-phase HPLC pattern. According to the obtained thermodynamic data, benzene adsorption into HKUST-1 micropores from solutions with a vol.% of isopropanol in the range of 0.4 to 5.0 follows the unique entropy-driven mechanism previously described for the MIL-53(Al) framework. It was found that HKUST-1 loading in the composites and their preparation conditions have pronounced effects on their physicochemical properties and adsorption performance, including the adsorption mechanism.

Quaternary Selenides EuLnCuSe3: Synthesis, Structures, Properties and In Silico Studies.

In this work, we report on the synthesis, in-depth crystal structure studies as well as optical and magnetic properties of newly synthesized heterometallic quaternary selenides of the Eu+2Ln+3Cu+1Se3 composition. Crystal structures of the obtained compounds were refined by the derivative difference minimization (DDM) method from the powder X-ray diffraction data. The structures are found to belong to orthorhombic space groups Pnma (structure type Ba2MnS3 for EuLaCuSe3 and structure type Eu2CuS3 for EuLnCuSe3, where Ln = Sm, Gd, Tb, Dy, Ho and Y) and Cmcm (structure type KZrCuS3 for EuLnCuSe3, where Ln = Tm, Yb and Lu). Space groups Pnma and Cmcm were delimited based on the tolerance factor t', and vibrational spectroscopy additionally confirmed the formation of three structural types. With a decrease in the ionic radius of Ln3+ in the reported structures, the distortion of the (LnCuSe3) layers decreases, and a gradual formation of the more symmetric structure occurs in the sequence Ba2MnS3 → Eu2CuS3 → KZrCuS3. According to magnetic studies, compounds EuLnCuSe3 (Ln = Tb, Dy, Ho and Tm) each exhibit ferrimagnetic properties with transition temperatures ranging from 4.7 to 6.3 K. A negative magnetization effect is observed for compound EuHoCuSe3 at temperatures below 4.8 K. The magnetic properties of the discussed selenides and isostructural sulfides were compared. The direct optical band gaps for EuLnCuSe3, subtracted from the corresponding diffuse reflectance spectra, were found to be 1.87-2.09 eV. Deviation between experimental and calculated band gaps is ascribed to lower d states of Eu2+ in the crystal field of EuLnCuSe3, while anomalous narrowing of the band gap of EuYbCuSe3 is explained by the low-lying charge-transfer state. Ab initio calculations of the crystal structures, elastic properties and phonon spectra of the reported compounds were performed.

Impact of composition and structural parameters on the catalytic activity of MFI type titanosilicalites.

Titanosilicalite of the MFI type was obtained via a hydrothermal method. Its initial and annealed at 75 °C (TS-1P(75)) and 500 °C (TS-1P(500)) forms were studied by X-ray powder diffraction (PXRD), X-ray absorption spectroscopy (XAS-method), Fourier-transform infrared (FT-IR) spectroscopy, differential scanning calorimetry (DSC), temperature-programmed ammonia desorption (TPD NH3), and pyridine adsorption (Py). The full-profile Rietveld method allowed us to observe the presence of the organic template tetrapropylammonium hydroxide (TPAOH) in the framework voids, as well as to determine the silicate module (Si/Ti = 73.5) and the distribution of Ti4+ ions over the MFI-type structure sites (Ti atoms replace Si ones in two positions: T1 and T6). The coordination numbers of titanium (CNTi = 4.6 for TS-1P and TS-1P(75), CNTi = 3.8 for TS-1P(500)) were established by the XAS-method. The catalytic activity of titanosilicalites was found in the reactions of nitrous oxide decomposition (the maximal decomposition rate is demonstrated for the TS-1P(75) sample), allyl chloride epoxidation to epichlorohydrin (the best combination of all indicators was exhibited for the TS-1P sample) and propane conversion (maximum propane conversion, and butadiene and propylene selectivity were observed in both TS-1P(75) and TS-1P(500) samples). Mechanisms for the catalytic processes are proposed. The relationship between the catalytic properties and the composition (Si/Ti), Ti4+ ion distribution over the MFI-type structure sites, the local environment of titanium ions, and the number of acid sites in the titanosilicalites are discussed.

Hydroamination of Phenylacetylene with Aniline over Gold Nanoparticles Embedded in the Boron Imidazolate Framework BIF-66 and Zeolitic Imidazolate Framework ZIF-67.

The hydroamination of alkynes is an atom-economy process in the organic synthesis for the C-N bond formation, thereby allowing the production of fine chemicals and intermediates. However, direct interaction between alkynes and amines is complicated due to the electron enrichment of both compounds. Therefore, efficient hydroamination catalysts, especially heterogeneous ones, are in great demand. This work aimed at the development of novel heterogeneous catalysts based on zeolite-like metal-organic frameworks for phenylacetylene hydroamination. The sodalite (SOD) type zeolitic imidazolate framework ZIF-67 (Co(meim)2, meim = 2-methylimidazolate) and boron imidazolate framework BIF-66 ({Co[B(im)4]2}n, im = imidazolate) were studied as the carriers for the gold nanoparticles (Au-NPs). Au-NPs were embedded in the ZIF-67 and BIF-66 matrices by incipient wetness impregnation. Au@ZIF-67 and Au@BIF-66 hybrids were studied for the first time in the liquid phase hydroamination of phenylacetylene with aniline in an air atmosphere and have shown high activity and selectivity in respect to imine in this process. The pronounced impact of the nature of the metal-organic carrier, Au source, and reducing agent on the catalytic performance of the synthesized nanomaterials was found. To the best of our knowledge, it is the first example of using the zeolitic imidazolate framework and boron-imidazolate framework as the components of the gold-containing catalytic systems for the alkyne hydroamination.

Proton conductivity as a function of the metal center in porphyrinylphosphonate-based MOFs.

The rational design of metal-organic frameworks (MOFs) is highly important for the development of new proton conductors. Porphyrinylphosphonate-based MOFs, providing the directed tuning of physical and chemical properties of materials through the modification of a macrocycle, are potentially high-conducting systems. In this work the synthesis and characterization of novel anionic Zn-containing MOF based on palladium(ii) meso-tetrakis(3-(phosphonatophenyl))porphyrinate, IPCE-2Pd, are reported. Moreover, the proton-conductive properties and structures of two anionic Zn-containing MOFs based on previously described nickel(ii) and novel palladium(ii) porphyrinylphosphonates, IPCE-2M (M = Ni(ii) or Pd(ii)), are compared in details. The high proton conductivity of 1.0 × 10-2 S cm-1 at 75 °C and 95% relative humidity (RH) is revealed for IPCE-2Ni, while IPCE-2Pd exhibits higher hydrolytic and thermal stability of the material (up to 420 °C) simultaneously maintaining a comparable value of conductivity (8.11 × 10-3 S cm-1 at 95 °C and 95% RH). The nature of the porphyrin metal center is responsible for the features of crystal structure of materials, obtained under identical reaction conditions. The structures of IPCE-2Pd and its dehydrated derivative IPCE-2Pd-HT are determined from the synchrotron powder diffraction data. The presence of phosphonic groups in compared materials IPCE-2M affords a high concentration of proton carriers that together with the sorption of water molecules leads to a high proton conductivity.

Isostructural cocrystals of metaxalone with improved dissolution characteristics.

Muscle relaxant and pain reliever metaxalone (MET) is a biopharmaceutical classification systems (BCS) class II drug with poor aqueous solubility and high permeability. The presence of an aromatic skeleton and cyclic carboxamate moiety are the probable reasons for the decreased aqueous solubility, which impacts on its low bioavailability. A high dose (800 mg) of the drug often creates adverse side effects on the central nervous system that needs urgent remedy. Cocrystallization of MET with nicotinamide (NAM), salicylamide (SAM), and 4-hydroxybenzoic acid (HBA) resulted in multicomponent solids that were characterized by PXRD, DSC and single crystal X-ray diffraction. Cocrystals with SAM and NAM form 2D isostructural cocrystals, whereas with HBA the result is a differently packed cocrystal hydrate (or anisole hemisolvate) depending upon the crystallization medium. Similar to the reported MET cocrystals, these cocrystals also confirm the preference for an imide⋯imide homosynthon in the drug. The dominance of the drug-drug homodimer over drug-coformer heterodimers was demonstrated based on binding energy calculations. Further, powder dissolution experiments in pH 6.8 phosphate buffer indicate that the cocrystals improved the apparent solubility compared to the native drug by 3-9 fold. The absence of stronger heterosynthons between MET and the coformers, their lower melting points and the high solubility of the coformers are the probable reasons for the enhanced solubility of the bioactive component. The MET-NAM cocrystal exhibited the highest solubility/dissolution rate among the three binary solid forms, which may offer improved bioavailability and a lower dose with minimal side effects.

Porphyrinylphosphonate-Based Metal-Organic Framework: Tuning Proton Conductivity by Ligand Design.

A novel metal-organic framework [Zn3 (Ni-H2 TPPP)(Ni-H4 TPPP)(Ni-H5 TPPP)⋅7(CH3 )2 NH2 ⋅DMF⋅7 H2 O] (where Ni-Hx TPPP (x=2,4,5) are partially deprotonated [5,10,15,20-tetrakis(3-(phosphonatophenyl)-porphyrinato(2-))]nickel(II) species), IPCE-2Ni, with outstanding proton conductivity (1.0×10-2  S cm-1 at 75 °C and 95 % relative humidity) has been obtained. The high concentration of free phosphonate groups and compensating dimethylammonium cations bound by hydrogen bonds in the unique crystal structure of IPCE-2Ni is a key factor responsible for the observed high proton conductivity, which is one order of magnitude higher than for the corresponding MOF based on 5,10,15,20-tetrakis(4-(phosphonatophenyl)porphyrinato(2-))]nickel(II) IPCE-1Ni and comparable with that of leaders among MOFs.

2D MOFs with Ni(II), Cu(II), and Co(II) as Efficient Oxygen Evolution Electrocatalysts: Rationalization of Catalytic Performance vs Structure of the MOFs and Potential of the Redox Couples.

Earth-abundant transition-metal-based metal-organic frameworks (MOFs) are of immense interest for the development of efficient and durable heterogeneous water splitting electrocatalysts. This repot explores the design of two-dimensional (2D) MOFs with redox-active metal centers (Ni(II), Co(II), and Cu(II)) containing two types of electron-rich linkers such as bis(5-azabenzimidazole), linear L1 and angular L2, and aromatic dicarboxylates. The electron-rich linkers are considered to stabilize the higher oxidation state of the redox-active metal centers in the course of the electrocatalytic oxygen evolution reaction (OER) process. The 2D MOFs of L1 and L2 with Co(II) (1 and 3) and Ni(II) (2 and 4) have been produced via the conventional hydrothermal synthesis, while the MOFs of Cu(II) (Cu@1 and Cu@3) are obtained by the postsynthetic transmetallation reaction of MOFs 1 and 3. The electrocatalytic OER activities of the six MOFs have been studied to explore the influence of the redox potential of the transition-metal quasi-reversible couples and the coordination environment around the redox-active metal centers in the electrocatalytic activity. The lowest overpotential of 370 mV exhibited by MOF 2 with the highest current density and TOF value indicates the importance of the presence of coordinated water molecules and the lowest redox potential value of the most favorable quasi-reversible couple Ni+2/Ni+3. These catalysts exhibit a remarkable stability up to 1000 OER cycles. These studies pave the way for the design of MOF materials toward the development of a promising heterogeneous OER electrocatalyst.