Accuracy and feasibility in building a personalized 3D printed femoral pseudoaneurysm model for endovascular training.

BACKGROUND: The use of three-dimensional(3D) printing is broadly across many medical specialties. It is an innovative, and rapidly growing technology to produce custom anatomical models and medical conditions models for medical teaching, surgical planning, and patient education. This study aimed to evaluate the accuracy and feasibility of 3D printing in creating a superficial femoral artery pseudoaneurysm model based on CT scans for endovascular training. METHODS: A case of a left superficial femoral artery pseudoaneurysm was selected, and the 3D model was created using DICOM files imported into Materialise Mimics 22.0 and Materialise 3-Matic software, then printed using vat polymerization technology. Two 3D-printed models were created, and a series of comparisons were conducted between the 3D segmented images from CT scans and these two 3D-printed models. Ten comparisons involving internal diameters and angles of the specific anatomical location were measured. RESULTS: The study found that the absolute mean difference in diameter between the 3D segmented images and the 3D printed models was 0.179±0.145 mm and 0.216±0.143mm, respectively, with no significant difference between the two sets of models. Additionally, the absolute mean difference in angle was 0.99±0.65° and 1.00±0.91°, respectively, and the absolute mean difference in angle between the two sets of data was not significant. Bland-Altman analysis confirmed a high correlation in dimension measurements between the 3D-printed models and segmented images. Furthermore, the accuracy of a 3D-printed femoral pseudoaneurysm model was further tested through the simulation of a superficial femoral artery pseudoaneurysm coiling procedure using the Philips Azurion7 in the angiography room. CONCLUSIONS: 3D printing is a reliable technique for producing a high accuracy 3D anatomical model that closely resemble a patient's anatomy based on CT images. Additionally, 3D printing is a feasible and viable option for use in endovascular training and medical education. In general, 3D printing is an encouraging technology with diverse possibilities in medicine, including surgical planning, medical education, and medical device advancement.

Understanding ADC variation by fat content effect using a dual-function MRI phantom.

BACKGROUND: A dual-function phantom designed to quantify the apparent diffusion coefficient (ADC) in different fat contents (FCs) and glass bead densities (GBDs) to simulate the human tissues has not been documented yet. We propose a dual-function phantom to quantify the FC and to measure the ADC at different FCs and different GBDs. METHODS: A fat-containing diffusion phantom comprised by 30 glass-bead-containing fat-water emulsions consisting of six different FCs (0, 10, 20, 30, 40, and 50%) multiplied by five different GBDs (0, 0.1, 0.25, 0.5, and 1.0 g/50 mL). The FC and ADC were measured by the "iterative decomposition of water and fat with echo asymmetry and least squares estimation-IQ," IDEAL-IQ, and single-shot echo-planar diffusion-weighted imaging, SS-EP-DWI, sequences, respectively. Linear regression analysis was used to evaluate the relationship among the fat fraction (FF) measured by IDEAL-IQ, GBD, and ADC. RESULTS: The ADC was significantly, negatively, and linearly associated with the FF (the linear slope ranged from -0.005 to -0.017, R2 = 0.925 to 0.986, all p < 0.001). The slope of the linear relationship between the ADC and the FF, however, varied among different GBDs (the higher the GBD, the lower the slope). ADCs among emulsions across different GBDs and FFs were overlapped. Emulsions with low GBDs plus high FFs shared a same lower ADC range with those with median or high GBDs plus median or lower FFs. CONCLUSIONS: A novel dual-function phantom simulating the human tissues allowed to quantify the influence of FC and GBD on ADC. RELEVANCE STATEMENT: The study developed an innovative dual-function MRI phantom to explore the impact of FC on ADC variation that can affect clinical results. The results revealed the superimposed effect on FF and GBD density on ADC measurements. KEY POINTS: • A dual-function phantom made of glass bead density (GBD) and fat fraction (FF) emulsion has been developed. • Apparent diffusion coefficient (ADC) values are determined by GBD and FF. • The dual-function phantom showed the mutual ADC addition between FF and GBD.

Vesicoureteral reflux is associated with increased risk of chronic kidney disease: A nationwide cohort study.

The association between vesicoureteral reflux (VUR) and chronic kidney disease (CKD) risk remains unestablished. We investigated the incidence of CKD in children with VUR in Taiwan and evaluated whether they had a higher risk of CKD than the general population. A nationwide population-based cohort study was conducted among children with VUR identified using Taiwan's National Health Insurance Research Database from 2000 to 2013. VUR was defined according to the International Classification of Diseases, Ninth Revision, Clinical Modification codes. We identified the children with VUR and randomly selected comparison children according to a 1:1 ratio, matching them by age, gender, index year and comorbidity using data from the National Health Insurance Research Database. In total, 8648 children with VUR and 8648 comparison children were included. All children were followed from the study date until a diagnosis of CKD, termination of insurance, or the end of 2013. Cox proportional hazards regressions were performed to compare the hazard ratios for CKD between the 2 cohorts. Incident cases of CKD were identified. After adjustment for potential confounders, the study cohort was independently associated with a higher risk of CKD (adjusted hazard ratio, 3.78; 95% confidence interval, 2.10-7.18). This population-based cohort study indicated that children with VUR have a higher risk of CKD than those without VUR.

Special presentation of bronchobiliary fistula after transcatheter arterial chemoembolization: A case report.

RATIONALE: Transcatheter arterial chemoembolization (TACE) is a widely adopted treatment for advanced stage hepatocellular carcinoma (HCC). Nevertheless, several complications may occur, such as hepatic artery injury, nontarget embolization, pulmonary embolism, hepatic abscess, biloma, biliary strictures, and hepatic failure. However, bronchobiliary fistula is rarely mentioned before. PATIENT CONCERNS: A 65-year-old man with HCC underwent the TACE procedure, and then he encountered fever, dyspnea, abdominal pain, and abundant yellowish purulent bronchorrhea. DIAGNOSIS: Bronchobiliary fistula was diagnosed based on the computed tomography (CT) scan of his chest, which revealed the right lower lobe of his lung was connected to a hepatic cystic lesion. INTERVENTIONS: Percutaneous transhepatic cystic drainage was performed, and we obtained yellowish bile, showing the same characteristics as the patient's bronchorrhea. OUTCOMES: We kept drainage of his biloma and provided supportive care as the patient wished. Unfortunately, the patient passed away due to progressive right lower lobe pneumonia 2 weeks later. LESSONS: This case exhibits a typical CT scan image that was helpful for the diagnosis of post-TACE bronchobiliary fistula. Post-TACE bronchobiliary fistula formation hypothesis includes biliary tree injuries with subsequent biloma formation and diaphragmatic injuries. Moreover, the treatment of bronchobiliary fistula should be prompt to cease pneumonia progression. Therefore, we introduce this rare complication of post-TACE bronchobiliary fistula in hopes that future clinicians will keep earlier intervention in mind.

Renal Ewing Sarcoma: A Challenging Diagnosis.

No. Abstract. DOI: 10.52547/ijkd.6601.