Structural Diversity and Dimensionality of Three Cu(II)-dpds-C5O5 2- Coordination Polymers Controlled by the Coordination Sphere of Cu(II) Centers and the Coordination Modes of C5O5 2- (dpds = 4,4'-Dipyridyldisulfide).

Three supramolecular architectures, [Cu2(dpds)2(C5O5)2(H2O)4]·3H2O (1), [Cu(dpds)(C5O5)]·3H2O (2), and [Cu2(dpds)2(C5O5)2]·9H2O·C2H5OH (3) (dpds = 4,4'-dipyridyldisulfide and C5O5 2- (croconate) = dianion of 4,5-dihydroxycyclopent-4-ene-1,2,3-trione), have been synthesized and structurally characterized. Compound 1 contains two crystallographically independent Cu(II) ions, which are both distorted octahedral geometry with elongation along the croconate- and H2O-bound axial positions and bonded with two N atoms of two dpds, two O atoms of one C5O5 2-, and two H2O molecules. Two crystallographically independent dpds ligands, both adopting the bis-monodentate bridging mode, connect two Cu(II) ions to form a one-dimensional zigzag chain-like coordination polymer. In 2 and 3, there are two and three crystallographically independent Cu(II) ions, respectively, which are all distorted octahedral geometries with elongation along the croconate-bound axial positions six-coordinated and bonded with two N atoms of two dpds ligands in cis- or/and trans-forms and four O atoms of two C5O5 2- ligands. The dpds ligands in 2 and 3 all adopt the bis-monodentate bridging mode, and the C5O5 2- ligands act as bridging ligands with bridging bis-bidentate through three C5O5 2- oxygen atoms in 2 and bridging bis-bidentate through four adjacent C5O5 2- oxygen atoms in 3, respectively, linking the Cu(II) ions to generate a two-dimensional layered and a three-dimensional metal-organic framework, respectively. The structural diversity and dimensionality observed in 1-3 may be attributed to the cis- or/and trans-coordination sphere of Cu(II) centers with two dpds ligands and the coordination modes of croconate ligands. Thermal stability and in situ temperature-dependent structural variations of 1-3 have been verified by thermogravimetric analysis and powder X-ray diffraction measurements. Compounds 1 and 3 both exhibit water vapor capture behaviors with hysteresis isotherms.

Mechanochromic and Solvent-Induced Luminescence of a Supramolecular Pt(II)-Bipyridine Complex with Di(4-pyridylmethyl)aminedithiocarbamate.

[Pt(bpy)(DPMACS2)]2Cl2•3H2O (1•3H2O) (bpy = 2,2'-bipyridine, DPMACS2 = di(4-pyridylmethyl)aminedithiocarbamate) was synthesized and characterized by X-ray diffraction studies, and its crystal structure displayed intermolecular Pt(II)···Pt(II) contacts of 3.471 and 5.065 Å. Upon excitation, 1•3H2O showed broad luminescence at 538 nm, which was red-shifted and enhanced to 560 nm while cooling to 77 K. To this end, the B3LYP/LanL2DZ calculation results were performed to clearly explain their excited-state origin. Moreover, complex 1•3H2O displayed a dramatic mechanochromic shift from 538 to 608 nm while grinding, and the above red-shift was also observed while exposed to air within 1 day, suggestive of the simultaneous mechanochromic and solvent-induced luminescence. It is noted that the luminescence almost reverted to the original luminescence at 535-542 nm upon immersion in various solvents for the ground samples of complex 1•3H2O. In addition, the luminescence for the acetone-immersed ground samples returned to 608 nm in 1 min. The possible interactions between halogenated solvents and the free pyridyl groups in DPMACS2, which were not expected for acetone, have been proposed to be responsible for such a dramatic difference in this study.

Visible-Light-Photocatalyzed Self-Cyclopropanation Reactions of Dibenzoylmethanes for the Synthesis of Cyclopropanes.

A new self-cyclopropanation of 1,3-diphenylpropane-1,3-dione, leading to tetrasubstituted cyclopropane containing three contiguous stereogenic centers with high stereoselectivity, has been achieved through violet-light-emitting diode-irradiated photocatalysis, featuring both cycloaddition and a distinctive rearrangement. Diverging from conventional cyclopropanation pathways, this reaction yields a tetrasubstituted cyclopropane through unprecedented rearrangement and cascade reactions.

Cobalt(II) Single-Ion Magnet Coordinated by Double Deprotonation of 2,2'-Bipyridine-6,6'-diol Ligands.

In this study, we synthesized a new Co(II) complex, [NMe4]2[Co(bpyO2)2] (1), using deprotonated 2,2'-bipyridine-6,6'-diol ligands (bpyO2 2-). This compound exhibits a significant zero-field splitting (D) value. The far-infrared magneto spectroscopy and high-frequency and field electron paramagnetic resonance (HFEPR) measurements indicated that compound 1 possesses D = -54.8 cm-1 and E ∼ 0 cm-1. These findings were subsequently confirmed by other experimental data, including DC magnetic susceptibilities and variable temperature and variable magnetic field reduced magnetizations. Additionally, we conducted a series of AC magnetic susceptibility measurements to investigate the kinetics of magnetization relaxation. Below 6.6 K and under zero external magnetic field, fast quantum tunneling of magnetization (QTM) dominates (∼570 Hz), and temperature-independent out-of-phase signals are observed. Above 8.1 K, temperature-dependent behavior is observed. Furthermore, we examined the AC magnetic susceptibility behavior under external magnetic fields ranging from 300 to 4000 G. The effect of QTM is significantly reduced in the presence of an external magnetic field. Temperature-dependent behavior is primarily governed by Raman relaxation. Through structural analysis of compound 1 and a series of pure nitrogen-coordinated single-ion magnets (SIMs), we propose that the oxo substituents from the double-deprotonated form of the 2,2'-bipyridine-6,6'-diol ligands donate their negative charge to the pyridine ring, forming amido anion sites. This triggers a more pronounced out-of-phase signal than that observed in pure pyridine-coordinated compounds. Moreover, we observed intermolecular interactions, including intermolecular hydrogen bonding, which, to some extent, influenced the slow relaxation of molecules. Therefore, we speculate that the slow relaxation phenomenon of compound 1 may be attributed to the combination of oxo back-donating effects and intermolecular interactions.

Chlorine-containing polyacetoxybriarane diterpenoids from the octocoral Junceella fragilis.

The chemical screening of an octocoral identifed as Junceella fragilis has led to the isolation of five chlorinated briarane-type diterpenoids, including three known metabolites, gemmacolide X (1), frajunolide I (2), and fragilide F (3), along with two new analogs, 12α-acetoxyfragilide F (4) and 12α-acetoxyjunceellin (5). Single-crystal X-ray diffraction analysis was carried out to determine the absolute configurations of 1 and 2, while the structures of new compounds 4 and 5 were ascertained with 2D NMR experiments. Briaranes 1 and 3-5 were active in enhancing alkaline phosphatase (ALP) activity.

Piperidine and Pyridine Series Lead-Free Dion-Jacobson Phase Tin Perovskite Single Crystals and Their Applications for Field-Effect Transistors.

Two-dimensional (2D) organic-inorganic metal halide perovskites have gained immense attention as alternatives to three-dimensional (3D) perovskites in recent years. The hydrophobic spacers in the layered structure of 2D perovskites make them more moisture-resistant than 3D perovskites. Moreover, they exhibit unique anisotropic electrical transport properties due to a structural confinement effect. In this study, four lead-free Dion-Jacobson (DJ) Sn-based phase perovskite single crystals, 3AMPSnI4, 4AMPSnI4, 3AMPYSnI4, and 4AMPYSnI4 [AMP = (aminomethyl)-piperidinium, AMPY = (aminomethyl)pyridinium] are reported. Results reveal structural differences between them impacting the resulting optical properties. Namely, higher octahedron distortion results in a higher absorption edge. Density functional theory (DFT) is also performed to determine the trends in energy band diagrams, exciton binding energies, and formation energies due to structural differences among the four single crystals. Finally, a field-effect transistor (FET) based on 4AMPSnI4 is demonstrated with a respectable hole mobility of 0.57 cm2 V-1 s-1 requiring a low threshold voltage of only -2.5 V at a drain voltage of -40 V. To the best of our knowledge, this is the third DJ-phase perovskite FET reported to date.

Unraveling the Structure-Property-Performance Relationships of Fused-Ring Nonfullerene Acceptors: Toward a C-Shaped ortho-Benzodipyrrole-Based Acceptor for Highly Efficient Organic Photovoltaics.

The high-performance Y6-based nonfullerene acceptors (NFAs) feature a C-shaped A-DA'D-A-type molecular architecture with a central electron-deficient thiadiazole (Tz) A' unit. In this work, we designed and synthesized a new A-D-A-type NFA, termed CB16, having a C-shaped ortho-benzodipyrrole-based skeleton of Y6 but with the Tz unit eliminated. When processed with nonhalogenated xylene without using any additives, the binary PM6:CB16 devices display a remarkable power conversion efficiency (PCE) of 18.32% with a high open-circuit voltage (Voc) of 0.92 V, surpassing the performance of the corresponding Y6-based devices. In contrast, similarly synthesized SB16, featuring an S-shaped para-benzodipyrrole-based skeleton, yields a low PCE of 0.15% due to the strong side-chain aggregation of SB16. The C-shaped A-DNBND-A skeleton in CB16 and the Y6-series NFAs constitutes the essential structural foundation for achieving exceptional device performance. The central Tz moiety or other A' units can be employed to finely adjust intermolecular interactions. The single-crystal X-ray structure reveals that ortho-benzodipyrrole-embedded A-DNBND-A plays an important role in the formation of a 3D elliptical network packing for efficient charge transport. Solution structures of the PM6:NFAs detected by small- and wide-angle X-ray scattering (SWAXS) indicate that removing the Tz unit in the C-shaped skeleton could reduce the self-packing of CB16, thereby enhancing the complexing and networking with PM6 in the spin-coating solution and the subsequent device film. Elucidating the structure-property-performance relationships of A-DA'D-A-type NFAs in this work paves the way for the future development of structurally simplified A-D-A-type NFAs.

The hamburger-shape photocatalyst: thioxanthone-based chiral [2.2]paracyclophane for enantioselective visible-light photocatalysis of 3-methylquinoxalin-2(1H)-one and styrenes.

A new thioxanthone-based photocatalyst with a [2.2]paracyclophane skeleton and planar chirality has been developed. The catalyst has been successfully applied in the visible light-mediated enantioselective aza Paternò-Büchi reactions of quinoxalinone and styrenes to produce azetidines. The structures of the catalyst derivatives were unequivocally determined by their single crystal X-ray crystallography analysis.

Synthesis of Two-Dimensional (Cu-S)n Metal-Organic Framework Nanosheets Applied as Peroxidase Mimics for Detection of Glutathione.

Facilely synthesized peroxidase-like nanozymes with high catalytic activity and stability may serve as effective biocatalysts. The present study synthesizes peroxidase-like nanozymes with multinuclear active sites using two-dimensional (2D) metal-organic framework (MOF) nanosheets and evaluates them for their practical applications. A simple method involving a one-pot bottom-up reflux reaction is developed for the mass synthesis of (Cu-S)n MOF 2D nanosheets, significantly increasing production quantity and reducing reaction time compared to traditional autoclave methods. The (Cu-S)n MOF 2D nanosheets with the unique coordination of Cu(I) stabilized in Cu-based MOFs demonstrate impressive activity in mimicking natural peroxidase. The active sites of the peroxidase-like activity of (Cu-S)n MOF 2D nanosheets were predominantly verified as Cu(I) rather than Cu(II) of other Cu-based MOFs. The cost-effective and long-term stability of (Cu-S)n MOF 2D nanosheets make them suitable for practical applications. Furthermore, the inhibition of the peroxidase-like activity of (Cu-S)n MOF nanosheets by glutathione (GSH) could provide a simple strategy for colorimetric detection of GSH against other amino acids. This work remarkably extends the utilization of (Cu-S)n MOF 2D nanosheets in biosensing, revealing the potential for 2D (Cu-S)n MOFs.

From citronellal to iridoids: asymmetric synthesis of iridoids and their analogues via organocatalytic intramolecular Michael reactions.

A series of iridoids, including iridomyrmecin A, B, C', D', (-)-isoiridomyrmecin, (+)-7-epi-boschnialactone, and the inside-yohimbine analogues have been synthesized from readily available, naturally occurring (-)-citronellal via the key step reaction of metathesis, organocatalysis, and subsequent transformations, such as reduction, lactonization, alkylation, Pictet-Spengler reaction and lactamization. Notably, the use of DBU as an additive in the organocatalytic intramolecular Michael reaction of an aldehyde ester with Jørgensen-Hayashi catalysts resulted in better stereoselectivity than the conditions using acetic acid as an additive. The structures of three products have been unequivocally established with single-crystal X-ray crystallographic analyses.

Sinulariaone A: a novel diterpenoid with a 13-membered carbocyclic skeleton from an octocoral Sinularia species.

Chemical composition screening of an octocoral identified as Sinularia species led to the isolation of a novel diterpenoid, sinulariaone A (1), featuring a 13-membered carbocyclic skeleton. The structure of 1 was established by spectroscopic elucidation, computed calculation, and X-ray diffraction analysis. Moreover, a single-crystal X-ray diffraction analysis of chlorofurancembranoid B (2), obtained in our previous study from the same octocoral species, was reported for the first time to demonstrate the absolute configuration. Diterpenoid 1 showed cytotoxicity towards human promyelocytic leukemia HL-60 cells, with an IC50 value of 38.01 µM.

Briavioids E-G, Newly Isolated Briarane-Diterpenoids from a Cultured Octocoral Briareum violaceum.

The chemical screening of a cultured soft coral, Briareum violaceum, led to the isolation of eight natural, briarane-related diterpenoids, including three unreported metabolites, briavioids E-G (1-3), and five known briaranes, briacavatolides B (4) and C (5), briaexcavatin L (6), briaexcavatolide U (7) and briarenol K (8). The structures of briaranes 1-8 were established using spectroscopic methods. The absolute configuration of briavioid A (9), obtained in a previous study, was reported for the first time in this study by a single-crystal X-ray diffraction analysis using a copper radiation source. The anti-inflammatory activity of briaranes 1 and 2 and briaranes 4-8 was evaluated by screening their inhibitory ability against the expression of inducible nitric oxide synthase (iNOS) and cyclooxygenase-2 (COX-2) proteins in lipopolysaccharide (LPS)-induced RAW 264.7 macrophage cells.

A linear Di-coordinate boron radical cation.

The pursuit of di-coordinate boron radical has been continued for more than a half century, and their stabilization and structural characterization remains a challenge. Here we report the isolation and structural characterization of a linear di-coordinate boron radical cation, achieved by stabilizing the two reactive atomic orbitals of the central boron atom by two orthogonal π-donating and π-accepting functionalities. The electron deficient radical cation undergoes facile one-electron reduction to borylene and binds Lewis base to give heteroleptic tri-coordinate boron radical cation. The co-existence of half-filled and empty p orbitals at boron also allows the CO-regulated electron transfer to be explored. As the introduction of CO promotes the electron transfer from a tri-coordinate neutral boron radical to a boron radical cation, the removal of CO under vacuum furnishes the reverse electron transfer from borylene to yield a solution consisting of two boron radicals.

Supramolecular assembly and structural transformation of d10-metal complexes containing (aza-15-crown-5)dithiocarbamate.

The reaction of potassium (aza-15-crown-5)dithiocarbamate (KO4NCS2) and (Me2S)AuCl gave the dinuclear complex [Au(O4NCS2)]2, which underwent structural transformation upon heating to rearrange into the hexanuclear complex [Au(O4NCS2)]6. Under similar reaction conditions, KO4NCS2 reacted with AgNO3 or [Cu(CH3CN)4]ClO4 to give the 1-D coordination polymer [Ag(O4NCS2)]n (1) and the tetranuclear complex [Cu(O4NCS2)]4 (2), respectively. It is noted that upon heating a similar structural transformation process occurs from tetranuclear complex 2 to the octanuclear complex [Cu(O4NCS2)]8 (2'), connected by a weak Cu⋯S contact of 2.846 Å, and it has been isolated and corroborated by powder and single-crystal X-ray diffraction studies as well. Moreover, a variety of MO4NCS2 salts (M = Li+, Na+, K+ and Rb+) were used to react with AgNO3 to construct a series of coordination architectures: [LiAg(O4NCS2)2(µ-H2O)0.5]2 (3), {Na[Ag(O4NCS2)2]}n (4), {K[Ag(O4NCS2)2]}n (5) and {Rb[Ag(O4NCS2)2]}n (6). The smallest Li+ ion only coordinates with four oxygen atoms from the same azacrown ether ring and one H2O molecule, leading to a 1-D hydrogen-bonded chain with another azacrown ether ring for complex 3. The larger Na+ ion coordinates with seven oxygen atoms from two different crown ether rings, leading to a 1-D chain for complex 4. However, the largest K+ and Rb+ ions constitute a 1-D framework, except that each metal ion coordinates with eight oxygen atoms from two different crown ether rings, featuring a 1-D helical chain for complexes 5 and 6. Hence, the different sizes of alkaline metal ions exert a dramatic effect on the structural motifs of complexes 3-6. Remarkably, the dithiocarbamate moieties adopt µ2-bridging ([Au(O4NCS2)]2 and [Au(O4NCS2)]6), µ3- and µ4-bridging (1-2) and chelate forms (3-6) in the structural backbones.

Surficial grafting of organoimido moieties enhances the capacity performance of oxometallic clusters.

Molybdenum trioxide (MoO3) with a theoretical specific capacity of 1117 mA h g-1 is widely considered a promising anode material for lithium-ion batteries. However, the irreversible conversion reactions, low electrical conductivity, and detrimental volume expansion upon Li intercalation between the one-dimensional layered structures of MoO3 hinder its practical implementation. Herein, we report a facile synthetic protocol that allows surficial modification by replacing the terminal and bridging oxo groups of molybdenum oxide clusters. Successful organoimido functionalization resulted in a large cathodic shift in Mo(VI/V) reduction by 0.6 V, pronounced electronic communication between the organic moiety and the metal-oxide unit, and significant increase in electrical conductivity (80-100 Ω interfacial charge-transfer resistance). Combined with the enlarged active surface area due to the structural hindrance induced by the organic functionality, the steady specific capacity of the organoimido-modified molybdenum oxide clusters was greater than 1200 mA h g-1 at 900 mA g-1 at the end of 360 cycles, where the best value of 1653 mA h g-1 was achieved for the nitroaniline-substituted species. The steady capacity of 480 mA h g-1 was achieved in the fast charge-discharge process (3000 mA g-1) over 1400 cycles. The results indicate that the surficial modification of metal oxides with organo moieties using our facile synthetic method has broad application potential for metal oxides to be used as high-capacity electrode materials in the future.

Stereoselective Cyclization Cascade of Dihydroquinoxalinones by Visible-Light Photocatalysis: Access to the Polycyclic Quinoxalin-2(1H)-ones.

An intriguing stereoselective visible-light photocatalysis of dihydroquinoxalinone derivatives has been realized via cyclization with or without the solvolysis cascade. The reactions provided the polycyclic ring structures with efficient formation of multiple bonds and with high stereoselectivity. X-ray crystallography unequivocally determined the structures of five polycyclic products.

Total Synthesis of Ulodione A via a Double-Alkylation and DABCO Promoted Ring-Expansion Rearrangement Sequence.

First total synthesis of ulodione A has been achieved via the key-step reactions of DIPEA-promoted dialkytion of 1,3-cyclopentadione with a bromonitroolefin and DABCO promoted/catalytic semipinacol-like ring-expansion rearrangement, with regioselective transformation of the nitrocyclohexane intermediates to their cyclopentenone counterparts via a sequence of reactions in a one-pot operation. Structures of six products were unequivocally established by X-ray crystallography.

Phonon-induced relaxation mechanisms are changed by a chelating effect in a CoII single-ion magnet.

It is well known that phonon-induced relaxation processes play a significant role in accelerating magnetization relaxation in the low-temperature regime. Unfortunately, many SIMs (single-ion magnets) suffer from being quenched by these mechanisms such that neither out-of-phase signals nor magnetization hysteresis can be readily observed. Nevertheless, because it involves molecular motions at low-frequency (low-energy) levels, methods for synthetically controlling this factor have not yet been addressed by chemists. In this study, we prepared a series of three compounds in which one contains a rigid chelating ligand, and the other two contain analogous ligands that can coordinate more liberally. To our surprise, compound 1, with a rigid chelating ligand, displayed promising SIM behavior with out-of-phase signals up to 11 K in a zero d.c. magnetic field at an a.c. frequency of 1000 Hz. The other two (2 and 3) with dangling ligands failed to show significant out-of-phase signals until an extra d.c. field was applied. The results of magnetization relaxation studies suggest that the phonon-induced relaxation processes play an essential role in 2 and 3, even at very low temperatures. Nevertheless, the rigid chelating ligand in 1 prevents the molecule from being involved in phonon-induced relaxation processes that seriously interfere with the magnetization relaxation up to 5.6 K. Therefore, we concluded that the presence of a rigid chelating ligand can efficiently change the phonon-induced relaxation processes at low temperatures.

A mild one-pot transformation of nitroalkanes to ketones or aldehydes via a visible-light photocatalysis-hydrolysis sequence.

Using a visible-light photoredox catalysis strategy with household decorative blue LEDs and the additives Et3N and DIPEA, as well as the subsequent hydrolysis sequence, a mild one-pot process for the direct transformation of nitroalkanes to the corresponding ketones and aldehydes, constituting a Nef-like reaction, has been developed. It is worth noting that by using an appropriate photocatalyst (e.g., [Ir(dtbbpy)(ppy)2]PF6) and the extra additive Et3N with the combination of DIPEA and Mg(ClO4)2 in i-PrOH (instead of CH3CN), the transformation of nitroalkanes to the corresponding oximes, rather than nitrones, can be markedly more effective. The oximes can then be hydrolyzed to ketones by reaction with CuCl2·2H2O in a pH 7 buffer solution. This process is appealing because of the benefits of efficient conversion, mild conditions, high yields, and general applicability to compounds with a wide range of labile functional groups.

Control of the Organocatalytic Enantioselective α-Alkylation of Vinylogous Carbonyl Enolates for the Synthesis of Tetrahydropyran Derivatives and Beyond.

The organocatalytic α-alkylation of vinylogous carbonyl compounds to hydroxynitroolefins for the synthesis of hemiacetals was realized with excellent enantioselectivities and in high yields. High diastereoselectivity (up to >20:1) has been accomplished with the addition of Et3N. The α- and γ-alkylation of vinylogous ketone against nitroolefins displayed high but opposite facial selectivities. Transformation of the hemiacetal products to other polycyclic compounds, including the euroticin B analog, has been demonstrated.