Discovery of TRPA1 Antagonist GDC-6599: Derisking Preclinical Toxicity and Aldehyde Oxidase Metabolism with a Potential First-in-Class Therapy for Respiratory Disease.

Transient receptor potential ankyrin 1 (TRPA1) is a nonselective calcium ion channel highly expressed in the primary sensory neurons, functioning as a polymodal sensor for exogenous and endogenous stimuli, and has been implicated in neuropathic pain and respiratory disease. Herein, we describe the optimization of potent, selective, and orally bioavailable TRPA1 small molecule antagonists with strong in vivo target engagement in rodent models. Several lead molecules in preclinical single- and short-term repeat-dose toxicity studies exhibited profound prolongation of coagulation parameters. Based on a thorough investigative toxicology and clinical pathology analysis, anticoagulation effects in vivo are hypothesized to be manifested by a metabolite─generated by aldehyde oxidase (AO)─possessing a similar pharmacophore to known anticoagulants (i.e., coumarins, indandiones). Further optimization to block AO-mediated metabolism yielded compounds that ameliorated coagulation effects in vivo, resulting in the discovery and advancement of clinical candidate GDC-6599, currently in Phase II clinical trials for respiratory indications.

Tetrahydrofuran-Based Transient Receptor Potential Ankyrin 1 (TRPA1) Antagonists: Ligand-Based Discovery, Activity in a Rodent Asthma Model, and Mechanism-of-Action via Cryogenic Electron Microscopy.

Transient receptor potential ankyrin 1 (TRPA1) is a nonselective calcium-permeable ion channel highly expressed in the primary sensory neurons functioning as a polymodal sensor for exogenous and endogenous stimuli and has generated widespread interest as a target for inhibition due to its implication in neuropathic pain and respiratory disease. Herein, we describe the optimization of a series of potent, selective, and orally bioavailable TRPA1 small molecule antagonists, leading to the discovery of a novel tetrahydrofuran-based linker. Given the balance of physicochemical properties and strong in vivo target engagement in a rat AITC-induced pain assay, compound 20 was progressed into a guinea pig ovalbumin asthma model where it exhibited significant dose-dependent reduction of inflammatory response. Furthermore, the structure of the TRPA1 channel bound to compound 21 was determined via cryogenic electron microscopy to a resolution of 3 Å, revealing the binding site and mechanism of action for this class of antagonists.

Preclinical assessment of the ADME, efficacy and drug-drug interaction potential of a novel NAMPT inhibitor.

GNE-617 (N-(4-((3,5-difluorophenyl)sulfonyl)benzyl)imidazo[1,2-a]pyridine-6-carboxamide) is a potent, selective nicotinamide phosphoribosyltransferase (NAMPT) inhibitor being explored as a potential treatment for human cancers. Plasma clearance was low in monkeys and dogs (9.14 mL min-1 kg-1 and 4.62 mL min-1 kg-1, respectively) and moderate in mice and rats (36.4 mL min-1 kg-1 and 19.3 mL min-1 kg-1, respectively). Oral bioavailability in mice, rats, monkeys and dogs was 29.7, 33.9, 29.4 and 65.2%, respectively. Allometric scaling predicted a low clearance of 3.3 mL min-1 kg-1 and a volume of distribution of 1.3 L kg-1 in human. Efficacy (57% tumor growth inhibition) in Colo-205 CRC tumor xenograft mice was observed at an oral dose of 15 mg/kg BID (AUC = 10.4 µM h). Plasma protein binding was moderately high. GNE-617 was stable to moderately stable in vitro. Main human metabolites identified in human hepatocytes were formed primarily by CYP3A4/5. Transporter studies suggested that GNE-617 is likely a substrate for MDR1 but not for BCRP. Simcyp® simulations suggested a low (CYP2C9 and CYP2C8) or moderate (CYP3A4/5) potential for drug-drug interactions. The potential for autoinhibition was low. Overall, GNE-617 exhibited acceptable preclinical properties and projected human PK and dose estimates.

Discovery of (S)-1-(1-(4-Chloro-3-fluorophenyl)-2-hydroxyethyl)-4-(2-((1-methyl-1H-pyrazol-5-yl)amino)pyrimidin-4-yl)pyridin-2(1H)-one (GDC-0994), an Extracellular Signal-Regulated Kinase 1/2 (ERK1/2) Inhibitor in Early Clinical Development.

The extracellular signal-regulated kinases ERK1/2 represent an essential node within the RAS/RAF/MEK/ERK signaling cascade that is commonly activated by oncogenic mutations in BRAF or RAS or by upstream oncogenic signaling. While targeting upstream nodes with RAF and MEK inhibitors has proven effective clinically, resistance frequently develops through reactivation of the pathway. Simultaneous targeting of multiple nodes in the pathway, such as MEK and ERK, offers the prospect of enhanced efficacy as well as reduced potential for acquired resistance. Described herein is the discovery and characterization of GDC-0994 (22), an orally bioavailable small molecule inhibitor selective for ERK kinase activity.

In vitro and in vivo evaluation of amorphous solid dispersions generated by different bench-scale processes, using griseofulvin as a model compound.

Drug polymer-based amorphous solid dispersions (ASD) are widely used in the pharmaceutical industry to improve bioavailability for poorly water-soluble compounds. Spray-drying is the most common process involved in the manufacturing of ASD material. However, spray-drying involves a high investment of material quantity and time. Lower investment manufacturing processes such as fast evaporation and freeze-drying (lyophilization) have been developed to manufacture ASD at the bench level. The general belief is that the overall performance of ASD material is thermodynamically driven and should be independent of the manufacturing process. However, no formal comparison has been made to assess the in vivo performance of material generated by different processes. This study compares the in vitro and in vivo properties of ASD material generated by fast evaporation, lyophilization, and spray-drying methods using griseofulvin as a model compound and hydroxypropyl methylcellulose acetate succinate as the polymer matrix. Our data suggest that despite minor differences in the formulation release properties and stability of the ASD materials, the overall exposure is comparable between the three manufacturing processes under the conditions examined. These results suggest that fast evaporation and lyophilization may be suitable to generate ASD material for oral evaluation. However, caution should be exercised since the general applicability of the present findings will need to be further evaluated.

Evaluation of drug load and polymer by using a 96-well plate vacuum dry system for amorphous solid dispersion drug delivery.

It is well recognized that poor dissolution rate and solubility of drug candidates are key limiting factors for oral bioavailability. While numerous technologies have been developed to enhance solubility of the drug candidates, poor water solubility continuously remains a challenge for drug delivery. Among those technologies, amorphous solid dispersions (SD) have been successfully employed to enhance both dissolution rate and solubility of poorly water-soluble drugs. This research reports a high-throughput screening technology developed by utilizing a 96-well plate system to identify optimal drug load and polymer using a solvent casting approach. A minimal amount of drug was required to evaluate optimal drug load in three different polymers with respect to solubility improvement and solid-state stability of the amorphous drug-polymer system. Validation of this method was demonstrated with three marketed drugs as well as with one internal compound. Scale up of the internal compound SD by spray drying further confirmed the validity of this method, and its quality was comparable to a larger scale process. Here, we demonstrate that our system is highly efficient, cost-effective, and robust to evaluate the feasibility of spray drying technology to produce amorphous solid dispersions.

Novel nanoparticles formulation for cassette dosing via intravenous injection in rats for high throughput pharmacokinetic screening and potential applications.

In recent years, one of the biggest challenges for pharmaceutical industry is to increase the speed of finding new medicines while at the same time controlling the ever rising cost of drug discovery and development. In order to increase the speed at which drug candidates are identified, high throughput assays (HTS) have been developed and have been widely implemented in the pharmaceutical industry. Cassette (or N-in-1) dosing for pharmacokinetic (PK) evaluation is the process of generating in vivo PK data in a higher throughput manner by dosing multiple compounds to individual animals. However, due to generally poor solubility of compounds being tested, high percentages of organic solvents are often used in the formulation vehicle in order to solubilize compounds for cassette studies. Utilization of high organic content in formulation vehicles can result in unwanted side effects and animal tolerability issues. The current study evaluates the suitability of using nanoparticles in an aqueous suspension for cassette IV dosing. Nanoparticles of 10 poorly soluble marketed drugs covering a wide range of clearances were prepared using an electrospray device and evaluated. PXRD, TGA and particle size data were obtained in order to ensure the quality for in vivo evaluation. Phosphate buffered saline (PBS) was used as the vehicle in IV cassette study using nanoparticles and pharmacokinetic estimates from this study were comparable to those from a traditional high organic formulation approach. The use of nanoparticles in an aqueous suspension formulation was demonstrated to be appropriate for cassette dosing.

Investigation of utilization of nanosuspension formulation to enhance exposure of 1,3-dicyclohexylurea in rats: Preparation for PK/PD study via subcutaneous route of nanosuspension drug delivery.

1,3-Dicyclohexylurea (DCU), a potent soluble epoxide hydrolase (sEH) inhibitor has been reported to lower systemic blood pressure in spontaneously hypertensive rats. One limitation of continual administration of DCU for in vivo studies is the compound's poor oral bioavailability. This phenomenon is mainly attributed to its poor dissolution rate and low aqueous solubility. Previously, wet-milled DCU nanosuspension has been reported to enhance the bioavailability of DCU. However, the prosperities and limitations of wet-milled nanosuspension have not been fully evaluated. Furthermore, the oral pharmacokinetics of DCU in rodent are such that the use of DCU to understand PK/PD relationships of sEH inhibitors in preclinical efficacy model is less than ideal. In this study, the limitation of orally delivered DCU nanosuspension was assessed by a surface area sensitive absorption model and pharmacokinetic modeling. It was found that dosing DCU nanosuspension did not provide the desired plasma profile needed for PK/PD investigation. Based on the model and in vivo data, a subcutaneous route of delivery of nanosuspension of DCU was evaluated and demonstrated to be appropriate for future PK/PD studies.