RESUMEN
World's highest arsenic (As) contamination is well-documented for the groundwater system of southwestern region (mainly Jashore district) of Bangladesh, where the majority of inhabitants are underprivileged. To mitigate As poisoning in southwestern Bangladesh, numerous steps have been taken so far by the government and non-governmental organizations (NGOs). Among them, digging deep tube wells and As removal by naturally deposited Fe(OH)3 species are being widely practiced in the contaminated areas. However, these actions have been left unmonitored for decades, making people unaware of this naturally occurring deadly poison in their drinking water. Hence, water samples (n = 63, both treated and untreated) and soil samples (n = 4) were collected from different spots in Jashore district to assess the safety level of drinking water and to understand the probable reasons for high As(III) contamination. About 93.7% of samples were found to contain As(III) above 10 µg/L; among them, 38% contained above 50 µg/L. The study shows that current As(III) removal strategies in the study area are ineffective. In this connection, a simple low-cost As(III) removal adsorbent is proposed that can be prepared with very cheap and locally available materials like iron sludge and charcoal. The adsorbent was characterized in terms of SEM, EDX, and XPS. The optimal dosage of the adsorbent was investigated for real-life application concerning several vital water quality parameters. The Fe-C adsorbent exhibited a maximum As(III) removal efficiency of 92% in real groundwater samples. The study will allow policymakers for informed decision-making regarding water body management as well as enable the local people to avail As-safe water in a way that aligns with their economic factors.