RESUMEN
Temporomandibular joint (TMJ) Meniscus removal is an option for the patient to regain full range of motion if the disc is irreversibly damaged or unable to be reduced. However, this procedure leaves the joint vulnerable to condylar remodeling and degeneration. We have shown that extracellular matrix (ECM) scaffolds remodel into a tissue with near native TMJ meniscus in previous studies. The next step towards clinical translation is to manufacture the ECM scaffold as a device under good manufacturing practices (GMP) and test it in a pre-clinical animal study under good laboratory practices (GLP). The primary objective of this study was to evaluate the in-vivo histopathological response to a Prototype GMP manufactured device made of decellularized porcine small intestinal submucosa (SIS), by observing for signs of surrounding tissue reaction to the device that are indicative of an adverse host response in comparison to an empty control at 21 days post-surgical implantation in a canine TMJ meniscus removal and implant model in a GLP setting. The conclusive findings were that the ECM device is safe for placement in the TMJ. After 21 days post implantation, histology of tissue surrounding the device and draining lymph nodes showed that the Prototype GMP device had no negative effects compared to the empty site (as evaluated by the board-certified veterinary pathologist). Furthermore, there was a lack of negative findings for clinical pathology (hematology and clinical chemistry), mortality, and body weight/weight change. Future studies will go to one year after implantation to show that the remodel device remains as a viable tissue with near native mechanical properties.
Asunto(s)
Menisco , Disco de la Articulación Temporomandibular , Animales , Perros , Matriz Extracelular/química , Intestino Delgado , Prótesis e Implantes , Porcinos , Articulación Temporomandibular , Disco de la Articulación Temporomandibular/fisiología , Disco de la Articulación Temporomandibular/cirugía , Ingeniería de Tejidos/métodos , Andamios del Tejido/efectos adversosRESUMEN
The temporomandibular joint (TMJ) disc is a fibrocartilaginous tissue located between the condyle of the mandible and glenoid fossa and articular eminence of the temporal bone. Damage or derangement of the TMJ disc can require surgical removal (discectomy) to restore function. Removal of the TMJ disc, however, leaves the joint space vulnerable to condylar remodeling and degradation, potentially leading to long-term complications. No consistently effective clinical option exists for repair or replacement of the disc following discectomy. This study investigates the use of an acellular scaffold composed of extracellular matrix (ECM) derived from small intestinal submucosa (SIS) as a regenerative template for the TMJ disc in a porcine model. Acellular SIS ECM scaffolds were implanted following discectomy and allowed to remodel for 2, 4, 12, and 24 weeks postimplantation. Remodeling of the implanted device was assessed by longitudinal magnetic resonance imaging (MRI) over the course of 6 months, as well as gross morphologic, histologic, biochemical, and biomechanical analysis (tension and compression) of explanted tissues (disc and condyle) at the time of sacrifice. When the scaffold remained in the joint space, longitudinal MRI demonstrated that the scaffolds promoted new tissue formation within the joint space throughout the study period. The scaffolds were rapidly populated with host-derived cells and remodeled with formation of new, dense, aligned fibrocartilage resembling native tissue as early as 1 month postimplantation. De-novo formation of peripheral muscular and tendinous attachments resembling those in native tissue was also observed. The remodeled scaffolds approached native disc biochemical composition and compressive modulus, and possessed 50% of the tensile modulus within 3 months postimplantation. No degradation of the condylar surface was observed. These results suggest that this acellular bioscaffold fills a medical need for which there is currently no effective treatment and may represent a clinically relevant "off-the-shelf" implant for reconstruction of the TMJ disc.
Asunto(s)
Matriz Extracelular , Disco de la Articulación Temporomandibular , Animales , Matriz Extracelular/química , Porcinos , Articulación Temporomandibular/cirugía , Disco de la Articulación Temporomandibular/patología , Disco de la Articulación Temporomandibular/cirugíaRESUMEN
Recently, magnesium (Mg) alloys have received significant attention as potential biomaterials for degradable implants, and this study was directed at evaluating the suitability of Mg for craniofacial bone screws. The objective was to implant screws fabricated from commercially available pure Mg and alloy AZ31 in vivo in a rabbit mandible. First, Mg and AZ31 screws were compared to stainless steel screws in an in vitro pull-out test and determined to have a similar holding strength (â¼40N). A finite-element model of the screw was created using the pull-out test data, and this model can be used for future Mg alloy screw design. Then, Mg and AZ31 screws were implanted for 4, 8 and 12weeks, with two controls of an osteotomy site (hole) with no implant and a stainless steel screw implanted for 12weeks. Microcomputed tomography was used to assess bone remodeling and Mg/AZ31 degradation, both visually and qualitatively through volume fraction measurements for all time points. Histological analysis was also completed for the Mg and AZ31 at 12weeks. The results showed that craniofacial bone remodeling occurred around both Mg and AZ31 screws. Pure Mg had a different degradation profile than AZ31; however, bone growth occurred around both screw types. The degradation rate of both Mg and AZ31 screws in the bone marrow space and the muscle were faster than in the cortical bone space at 12weeks. Furthermore, it was shown that by alloying Mg, the degradation profile could be changed. These results indicate the promise of using Mg alloys for craniofacial applications.
Asunto(s)
Implantes Absorbibles , Aleaciones/farmacología , Materiales Biocompatibles/farmacología , Tornillos Óseos , Magnesio/farmacología , Cráneo/efectos de los fármacos , Animales , Simulación por Computador , Cara , Femenino , Análisis de Elementos Finitos , Procesamiento de Imagen Asistido por Computador , Ensayo de Materiales , Conejos , Cráneo/diagnóstico por imagen , Microtomografía por Rayos XRESUMEN
The physical design of an oral and maxillofacial surgeon's office is highly individualized and unique. Every office must incorporate certain essential equipment and features to safely deliver office anesthesia, regardless of the scope of anesthesia services provided. Furthermore, the office design and anesthesia armamentarium must take into account patient safety and comfort. This article discusess the necessary elements, ranging from preanesthesia assessment forms and intraoperative records to office design, anesthesia monitors, and equipment related to the safe and successful administration of office-based anesthesia by oral and maxillofacial surgeons and their staff.
Asunto(s)
Procedimientos Quirúrgicos Ambulatorios/instrumentación , Anestesia Dental/instrumentación , Procedimientos Quirúrgicos Orales/instrumentación , Manejo de la Vía Aérea/instrumentación , Periodo de Recuperación de la Anestesia , Capnografía/instrumentación , Cateterismo Periférico/instrumentación , Consultorios Odontológicos , Registros Odontológicos , Tratamiento de Urgencia/instrumentación , Diseño de Equipo , Seguridad de Equipos , Arquitectura y Construcción de Instituciones de Salud , Humanos , Cuidados Intraoperatorios/instrumentación , Monitoreo Fisiológico/instrumentación , Seguridad del Paciente , Administración de la SeguridadAsunto(s)
Traumatismos Maxilofaciales/cirugía , Proceso Alveolar/lesiones , Huesos Faciales/lesiones , Traumatismos Faciales/cirugía , Humanos , Complicaciones Intraoperatorias , Fracturas Maxilomandibulares/cirugía , Planificación de Atención al Paciente , Complicaciones Posoperatorias , Procedimientos de Cirugía Plástica , Medición de Riesgo , Fracturas Craneales/cirugía , Traumatismos de los Tejidos Blandos/cirugía , Traumatismos de los Dientes/cirugía , Resultado del TratamientoRESUMEN
PURPOSE: A device composed of extracellular matrix (ECM) was investigated as an inductive template in vivo for reconstruction of the temporomandibular joint (TMJ) disk after discectomy. MATERIALS AND METHODS: A scaffold material composed of porcine-derived ECM was configured to mimic the shape and size of the TMJ. This device was implanted in a canine model of bilateral TMJ discectomy. After discectomy, 1 side was repaired with an ECM scaffold material and the contralateral side was left empty as a control. At 6 months after implantation, the joint space was opened, the joints were evaluated for signs of gross pathologic degenerative changes, and newly formed tissue was excised for histologic, biochemical, and biomechanical analysis. RESULTS: The results showed that implantation of an initially acellular material supported the formation of site-appropriate, functional host tissue that resembled that of the native TMJ disk. Furthermore, this prevented gross degenerative changes in the temporal fossa and mandibular condyle. No tissue formation and mild to severe gross pathologic changes were observed in the contralateral controls. CONCLUSIONS: These results suggest that an ECM-based bioscaffold could represent an off-the-shelf solution for TMJ disk replacement.
Asunto(s)
Matriz Extracelular/trasplante , Regeneración , Disco de la Articulación Temporomandibular , Ingeniería de Tejidos/métodos , Andamios del Tejido , Animales , Fenómenos Biomecánicos , Cartílago Articular/anatomía & histología , Colágeno/análisis , Perros , Matriz Extracelular/química , Femenino , Liofilización , Glicosaminoglicanos/análisis , Hidroxiprolina/análisis , Implantes Experimentales , Sus scrofa , Disco de la Articulación Temporomandibular/fisiología , Disco de la Articulación Temporomandibular/cirugía , Vejiga UrinariaRESUMEN
PURPOSE: A device consisting of powdered porcine urinary bladder extracellular matrix (UBM-ECM) encapsulated within sheets of the same material was investigated as a scaffold for temporomandibular joint (TMJ) meniscus reconstruction. MATERIALS AND METHODS: Five dogs underwent unilateral resection of the native meniscus and replacement with a UBM-ECM device. Necropsies were performed at 3, 4, 8, 12, and 24 weeks. Two additional dogs underwent bilateral resection of the meniscus with replacement with a UBM-ECM device on 1 side, leaving the contralateral side empty as a control. Necropsies were performed at 24 weeks for bilaterally treated animals. RESULTS: Macroscopically, the UBM-ECM implants were remodeled rapidly and were indistinguishable from newly deposited host tissue at all time points. Microscopically, remodeling was characterized by a dense infiltration of predominantly CD68(+) mononuclear cells and smooth muscle actin-positive fibroblast-like cells at early time points changing with time to a sparse population of smooth muscle actin-negative spindle-shaped cells resembling those of the native fibrocartilaginous TMJ meniscus. Furthermore, the remodeling process showed deposition of predominantly type I collagen, the density and organization of which resembled those of the native meniscus by the 24-week time point. Ingrowth of calsequestrin-positive skeletal muscle tissue was also observed at the periphery of the remodeled UBM-ECM device and was similar to that found at the attachment site of the native meniscus to the surrounding soft tissues. Histologic results were identical for samples excised from both unilaterally and bilaterally treated animals. No adverse changes in the articulating surfaces of the condyle or fossa were observed in UBM-ECM-implanted joints. In the bilaterally treated animals, the unimplanted control side was characterized by degeneration and pitting of the articulating surfaces of both the condyle and the fossa, with disorganized bands of fibrous connective tissue observed within the joint space. CONCLUSION: Results of this study suggest that the UBM-ECM device provides an effective interpositional material while serving as an inductive template for reconstruction of the TMJ meniscus.
Asunto(s)
Matriz Extracelular/trasplante , Regeneración Tisular Dirigida/métodos , Prótesis Articulares , Disco de la Articulación Temporomandibular/cirugía , Andamios del Tejido , Animales , Artroplastia de Reemplazo/métodos , Cartílago Articular/fisiología , Colágeno Tipo I/biosíntesis , Colágeno Tipo III/biosíntesis , Perros , Femenino , Neovascularización Fisiológica , Proyectos Piloto , Sus scrofa , Disco de la Articulación Temporomandibular/fisiología , Vejiga Urinaria/cirugíaRESUMEN
Much has been written about the repair of orbital fractures, yet some debate still exists among surgeons with regard to indications for and timing of fracture repair and various surgical techniques. Controversies regarding the surgical maneuvers include the incision, surgical approach, and methods of wound closure. More detailed imaging modalities have allowed clinicians to understand the injuries more completely and plan for and execute more ideal reconstructions. Recent advances in orbital implant materials and the role of endoscopy in orbital fracture repair add to this debate about which techniques would be best for particular injuries. This article discusses these issues and provides the most current literature review regarding the management of various orbital fractures.