Damage source localisation in complex geometries using acoustic emission and acousto-ultrasonic techniques: an experimental study on clear aligners.

Passive non-destructive evaluation tools such as acoustic emission (AE) testing and acousto-ultrasonics (AU) approach present a complex problem in damage localisation in complex and nonhomogeneous geometries. A novel AU-guided AE frequency interpretation approach is proposed in this research work which aims at overcoming this limitation. For the experimental evaluation, the damage sources from a geometrically complex clear dental aligners are tested under cyclic compression load and their origins are evaluated. Despite the rapid worldwide diffusion of the clear aligners, their mechanical behaviour is poorly investigated. In this work, the frequency characteristics of the artificially simulated stress wave, generated from different dental positions of the clear aligners, are studied using the AU approach. These frequency characteristics are then used to analyse the AE signals generated by these aligners when subjected to cyclic compressive loading. In addition, the time domain characteristics of the AE signals are studied using their Time of Arrival (ToA). The Akaike Information Criterion (AIC) is used to estimate the ToA. These frequency and time domain characteristics of the AE signals are used to estimate the local damage origin in the clear dental aligners. This will help in identifying localised damage sources during the usage period of the aligners. Experimental results revealed significant damages in the left maxillary premolar and right maxillary third molar of the aligners.

The Efficacy of the RME II System Compared with a Herbst Appliance in the Treatment of Class II Skeletal Malocclusion in Growing Patients: A Retrospective Study.

(1) Background: The objective of this study was to evaluate the efficacy of the Rapid Maxillary Expander (RME) II System compared to a Herbst appliance and a control group in the treatment of class II skeletal malocclusions in growing patients. (2) Methods: A total of 30 class II patients treated using the RME II System (group R) were compared with 30 patients treated with a Herbst appliance (group H) and 30 untreated class II children (group C). Cephalograms were compared at the start (T0) and after 24 months (T1). Nine cephalometric parameters were analyzed: SN-MP, SN-PO, ANB, AR-GO-ME, AR-GO-N, N-GO-ME, SN-PP, LFH, CO-GN, 1+SN, IMPA, OVERJET, and OVERBITE. Since the variables failed the normality test, a Wilcoxon test was performed for a pairwise comparison of the cephalometric measurements taken at T0 (pre-treatment) and at T1 (post-treatment). ANOVA with Tukey post hoc correction was used to evaluate the differences among the groups. (3) Results: ANOVA showed a statistically significant difference for all analyzed variables except for AR-GO-ME, AR-GO-N, and N-GO-ME. Post hoc Tukey's HSD test showed the following difference: the SN-PO angle in group H was 3.59° greater than in group R; the LFH in group H was 4.13 mm greater than in group R. The mandibular length (CO-GN) in group H was 3.94 mm greater than in group R; IMPA in group H was 6.4° greater than in group R; and the ANB angle in group H was 1.47° greater than in group R. (4) Conclusions: The RME II System is an effective therapeutic device for class II skeletal malocclusion treatment in growing patients.

Evaluation of Biomarkers of Bone Metabolism on Salivary Matrix in the Remodeling of Periodontal Tissue during Orthodontic Treatment.

The aim of this study was to evaluate changes in the concentration of N-terminal type I collagen extension pro-peptide (PINP), tartrate-resistant acid phosphatase (TRAcP), and parathyroid hormone-related protein (PTHrP) in saliva during orthodontic treatment in order to evaluate whether changes in bone turnover marker (BTM) concentration can help highlight the effects of orthodontic mechanical loading in the absence of clinical evidence of tooth movement in terms of tooth movement. Saliva samples from 25 apparently healthy young subjects (10 females and 15 males) were collected using Salivette® (Sarstedt) with cotton swabs and the concentrations of PTHrP, TRAcP 5b, and PINP were analyzed at time 0 (T1), 25 days (T2), and at 45 days (T3). Differences in the median value of biomarker levels between baseline T1 and follow-up of the different groups (T2 and T3) were assessed using the non-parametric Mann-Whitney U test. Trough concentrations of P1NP, PTHrP, and TRAcP were 0.80 µg/L, 0.21 ng/mL, and 0.90 U/L above the method LOD. The non-parametric Mann-Whitney U test confirmed a statistically significant difference in T1 versus concentrations of T2 and T3. All subjects evaluated had a statistically significant difference between T1 vs. T3. when compared with the specific critical difference (RCV) for the analyte The results obtained demonstrate that the evaluation of BTM changes in saliva can help the evaluation of orthodontic procedures and the monitoring of biomechanical therapy.

Craniofacial morphology in patients with impacted canine: a case control-study.

BACKGROUND: The objective of this study was to evaluate the risk of maxillary canine impaction through cephalometric evaluation. METHODS: One hundred and eighty-two Caucasian patients (80 males and 102 females) with a mean age of 12.4±0.5 were retrospectively enrolled in the present study. Ninety patients with impacted canines were compared with ninety-two patients with physiologically erupted canines. The following cephalometric variables were analyzed: SNA, ANB, SN-GOME, GO-ME, SP-CL, SELLA TURCICA DEPHT, A-Pt LINE, B-Pt LINE, A-Pt LINE°, B-Pt LINE°, A1s-Pt, A1i-Pt, A1s-Pt°, A1i-PT°, A-SN, B-SN and SN-U1. When applicable, a paired sample t-test was performed to investigate the difference in means between the two sample groups, while the Mann-Whitney Test was used as a non-parametric test in the case of a non-normal distribution of data. Statistical significance was set at P<0.05. RESULTS: The group with impacted canines showed an increase in Go-Me distance, SNA angle and A1s-Pt angle compared with the control group. In addition, the same group showed a decrease in A-SN and SP-Cl distance compared with the control group. CONCLUSIONS: An increase in mandibular length (GO-ME) and SNA angle associated with a reduction in A-Sn distance and interclinoid distance (SP-Cl) were observed in patients with impacted canines.

Botulinum Toxin Type A and Hyaluronic Acid Dermal Fillers in Dentistry: A Systematic Review of Clinical Application and Indications.

Background: Botulinum toxin type A (BoNT-A) and hyaluronic acid (HA) dermal fillers are increasingly utilized in dentistry for therapeutic and aesthetic purposes. However, a comprehensive synthesis of their clinical applications and indications in dentistry is lacking. This systematic review aimed to analyze the clinical application and indications of BoNT-A and HA dermal fillers in dentistry, providing insights into their efficacy, safety profiles, and limitations. Methods: A systematic search was conducted in PubMed/MEDLINE databases to identify relevant studies published between 2018 and 2024. Medical Subject Headings (MeSH) terms and keywords related to BoNT-A, HA dermal fillers, dentistry, clinical applications, and indications were used. Study selection criteria included randomized controlled trials (RCTs) and non-RCTs involving human participants of any age group. Data extraction and synthesis followed established guidelines, focusing on study characteristics, participant demographics, intervention details, outcome measures, and key findings related to BoNT-A and HA dermal fillers' clinical application in dentistry. Results: Systematic searches across electronic databases and grey literature identified 857 records, with an additional 73 from hand searches. After screening titles and abstracts, 542 records were excluded, leaving 374 full-text publications for evaluation. Ultimately, 12 RCTs and 13 non-RCTs were included. The systematic review encompassed diverse geographic locations: Brazil, Italy, Spain, Syria, India, Egypt, Korea, and the Netherlands, involving samples sizes ranging from 14 to 143 participants. The review synthesized findings on HA's efficacy in various areas, including bone repair, gingivitis management, temporomandibular joint disorders, postoperative swelling reduction, periodontal defect treatment, chin and check projection and lips augmentation. BoNT-A exhibited promising efficacy in managing orofacial pain conditions, gummy smile treatment and neuromodulation of the lower third muscles. Safety profiles varied among studies, with some reporting minimal adverse effects while others noted dose-related concerns. Conclusion: BoNT-A and HA dermal fillers offer a wide array of clinical applications in dentistry, ranging from therapeutic interventions to aesthetic enhancements. Despite promising efficacy, careful consideration and monitoring of safety outcomes are essential when integrating these interventions into clinical practice. Further research addressing methodological limitations and safety concerns is warranted to optimize their utilization and improve patient care in dentistry.

Evaluation of occlusal force in Class II subdivision malocclusion.

BACKGROUND: Class II subdivision is a malocclusion characterized by dental and functional asymmetry that is difficult to manage. Impaired muscle function can result in asymmetrical growth, leading to occlusal instability. OBJECTIVE(S): The study aimed to assess occlusal force in patients with Class II subdivision malocclusion using Innobyte. Additionally, the discrepancies of force generated at the position of maximum intercuspidation between the left and right sides of the arches were evaluated. METHODS: The occlusal force of 66 patients with Class II subdivision malocclusion (group S) was measured and compared with that of 66 patients with Class I (group I) and 66 patients with Class II malocclusion (group II). The S group patients had a Class I molar on the right side and a Class II molar on the left side. ANOVA test, followed by the Games-Howell post hoc test, was performed to compare the mean of the total force among the groups. To assess the difference in force between the right and left arches, one-way ANOVA test followed by Tukey's post hoc comparison was performed. Finally, a boxplot was created to show the trend of occlusal force recorded in the three groups of patients. RESULTS: The occlusal force differed significantly among the groups (p < .001). Post hoc Games-Howell analysis showed significant differences as follows: the total force in group S was 165.24 N greater than in group II and in group I was 218.06 N greater than in group II. The difference (right-left) in total force between the groups was statistically significant (p < .001). Tukey's post hoc test showed following significant correlation: in group S was 53.51 N greater than in group II and 63.12 N greater than in group I. CONCLUSIONS: Among the analysed groups, patients with Class II malocclusion exhibited the lowest value of occlusal force. In patients with Class II subdivision malocclusion, force asymmetry, characterised by a higher value on the Class I side and a lower value on the Class II side was observed.

Reliabilty of recording occlusal contacts by using intraoral scanner and articulating paper - A prospective study.

OBJECTIVE: The recording of occlusal contacts is a pivotal step in many dental procedures, yet the lack of a standardized method could introduce clinical errors. The aim of this study was to compare the occlusal contacts recorded using a intraoral scanner to the contacts recorded using articulating paper. As a secondary outcome, the subjective clinical assessment made using the two methods was compared between different observers. METHODS: Twenty-eight records were analysed for this study. Digital scan and intraoral photos of the coloured marks impressed by articulating paper were taken at the same time point for every patient. Using a standardized occlusal template, two operators recorded the number of occlusal contacts for every tooth provided by the two techniques. Then, 11 clinicians analysed the collected records and answered questions about the quality of the occlusions observed. RESULTS: The statistical analysis showed significant differences between the number of contacts recorded by digital scan and those recorded by the photographed articulation marks, except in the case of the upper central incisors and first premolars. The Kappa Fleiss showed slight and fair agreement between clinicians when judging the occlusions. CONCLUSION: The occlusal contacts recorded using the intraoral scanner and those recorded with the articulating paper did not match, and overall the clinicians showed low agreement when rating the recorded data. CLINICAL SIGNIFICANCE: Despite of the great clinical importance of occlusal contact there is a lack of a precise method for recording and collecting occlusal contacts.

Thermoplastic clear dental aligners under cyclic compression loading: A mechanical performance analysis using acoustic emission technique.

The objective of this work is to analyse the performance of clear aligners made of thermoplastic materials. Within this framework, the damage evolution stages and damage states of the aligners at different cycles of the compressive loading are evaluated using the Acoustic Emission (AE) technique. Three different clear aligner systems were prepared: thermoformed PET-g (polyethylene terephthalate glycol) and PU (polyurethane), and additively manufactured PU. Cyclic compression tests are performed to simulate 22500 swallows. The mechanical results show that the energy absorbed by the thermoformed PET-g aligner remains stable around 4 Nmm throughout the test. Although the PU-based aligners show a higher energy absorption of about 7 Nmm during the initial phase of the cyclic loading, this gradually decreases after 12500 cycles. The time-domain based, and frequency-based parameters of the stress wave acoustic signals generated by the aligners under compression loading are used to identify the damage evolution stages. The machine learning-based AE results reveal the initiation and termination of the different damage states in the aligners and the frequency-based results distinguish the different damage sources. Finally, the microscopy results validated the damage occurrences in the aligners identified by the AE results. The mechanical test results indicate that the thermoformed PET-g has the potential to match the performance and requirements of the dentistry of the popular Invisalign (additively manufactured PU). The AE results have the potential to identify at which cycles the aligners may start losing their functionality.

Curve of Spee modification in different vertical skeletal patterns after clear aligner therapy: a 3D set-up retrospective study.

OBJECTIVE: The purpose of the present study was to evaluate: (1) changes in the curve of Spee (COS) after clear aligner therapy and (2) whether such changes correlated with the patient's skeletal patterns. MATERIALS AND METHODS: Three-dimensional mandibular models of 106 patients (47 males and 59 females; mean age 22.3 SD ± 3.4 years) treated with clear aligners were retrospectively analysed. The perpendicular distance between the occlusal reference plane and the buccal cusp tip of each lateral tooth was measured. Five angular cephalometric measurements (PP-MP, PP-OP, OP-MP, AFH, and PFH) were performed and correlated with the T1-T0 difference in linear distances. The patients were divided into three groups according to facial divergence. Variance analysis with Tukey post hoc correction was performed to evaluate the differences among groups. RESULTS: The one-way ANOVA test showed a statistically significant difference for all analysed variables, except for the change in the distance of the second molar from the occlusal reference plane. Tukey's HSD test showed the following differences: In normodivergents, the T1-T0 difference in the distance of the first molar from the occlusal plane was 1 mm greater than that observed in the hyperdivergent group (p < 0.05); in the normodivergent group, the T1-T0 difference in the distance of the second premolar from the occlusal plane was 1.23 mm greater than that observed in the hyperdivergent group (p < 0.05), while in the hypodivergent group, it was 1.08 mm greater than in the hyperdivergent group (p < 0.05); finally, in normodivergents, the T1-T0 difference in the distance of the first premolar from the occlusal plane was 0.97 mm greater than that observed in the hyperdivergent group (p < 0.05). CONCLUSION: Treatment with aligners did not lead to a clinically significant change in COS depth. However, when dividing the sample into groups based on craniofacial divergence, COS depth change differed significantly between the three groups.

Skeletal and dental effects of function-generating bite appliance compared to rapid palatal expander and untreated controls.

INTRODUCTION: Maxillary expansion is a fundamental interceptive orthodontic treatment, which can be achieved through either a rapid expansion protocol or functional devices. However, no data exist about the efficacy of functional devices in achieving skeletal expansion. Therefore, the aim of this study was to compare the effects of the rapid palatal expander (RPE) and the function-generating bite type M (FGB-M) on the transversal dimension of the maxilla, and on the maxillary and mandibular dental arch width. METHODS: One hundred eighty-one skeletal Class I patients, aged between 6 and 12 years and with a cervical vertebral maturation stage II or III, with maxillary transversal deficiency were retrospectively enrolled; among these 55 were treated with FGB-M, 73 were treated with RPE and 51 were untreated subjects retrieved from historical databases. The pre-treatment (T0) and post-treatment (T1) frontal cephalograms were retrieved, and the maxillary and mandibular widths, and the distance between upper and lower first molars were measured. T1-T0 interval was of 17.3 months (RPE), 24.6 months (FGB-M) and 18.2 months (controls). RESULTS: The statistical analysis showed that there were no statistically significant differences between the RPE and FGB-M groups regarding skeletal and dental expansion, while the untreated control group differed significantly from the other two groups. CONCLUSION: The comparison between patients treated with RPE and FGB-M showed that there were no statistically significant differences between the RPE and FGB-M groups regarding the amount of skeletal expansion and dental arch width, suggesting that both appliances can be used to achieve similar results.

The Correlation between Mandibular Arch Shape and Vertical Skeletal Pattern.

Background and Objectives: The aim of this study was to evaluate the correlation between the mandibular arch shape and the vertical skeletal pattern in growing patients. Materials and Methods: A total of 73 Caucasian patients (33 males and 40 females; mean age 9.4) were retrospectively enrolled from a pool of patients treated in chronological order at the Department of Orthodontics, University of Foggia, Italy, from April 2018 to December 2021. Each patient received a laterolateral radiograph and a digital scan of the dental arch. Eight cephalometric parameters (lower gonial angle, intermaxillary angle, divergence angle, Wits index, Jarabak ratio, OP-MP angle, PP-OP angle, and ANB) and five dental measurements (posterior mandibular arch width, anterior mandibular arch width, mandibular occlusal angle, posterior width on distobuccal molar cusps, and molar angle) were analyzed and then compared. A Spearman's rho correlation test between the cephalometric measurements and the dental measurements was performed. Statistical significance was set at p < 0.05. Results: A negative statistically significant correlation was found between the Jarabak ratio and the intermolar angle; a statistically significant correlation was also observed between the Wits index, the posterior mandibular width, and the occlusal mandibular angle; the ANB angle and the occlusal mandibular angle; the intermaxillary angle (PP-PM) and the mandibular occlusal angle, posterior mandibular width on the disto-vestibular cusp, and the intermolar angle; and the OP-MP angle and mandibular occlusal angle and the posterior mandibular width on the disto-vestibular cusp. Conclusions: The mandibular arch form may be related to certain predisposing features in craniofacial morphology, such as jaw divergence, the Jarabak ratio, and the intermaxillary angle.

Correction of Class III Malocclusion Treated with Carriere® Motion™.

Class III malocclusion needs complex orthodontic treatment. This case report describes a 16-year-old male patient with skeletal class III malocclusion with a negative overjet and overbite. Upper incisors were proclined with the accentuated curve of Wilson. Treatment has changed the functional curve of Wilson that has improved functional dynamic occlusion. The patient was treated using a Carriere® Motion™ Class III (CM3) and SLX 3D Brackets system. After a 25-month treatment, the patient reached class I molars and canines relationships on both sides with good facial aesthetics and good functional occlusion. The result was also satisfactory for the patient. A one-year follow-up confirmed that the outcome was stable.

Treatment of Mandibular Impacted Canine in a Patient with Class II Division 1 Malocclusion with "Reverse Pin": A Case Report.

This case report presents an orthodontic treatment conducted on a 13-year-old girl with bilateral Class II malocclusion and a mandibular impacted canine. The presence of an impacted tooth necessitates careful consideration of the timing of orthodontic treatment, the appropriate surgical procedure to expose the tooth, the specific orthodontic mechanics involved, and the potential problems that may arise, all of which depend on the type and location of the canine impaction in the jaw. The treatment plan included a surgical procedure to expose the impacted tooth and orthodontic traction to guide it into position. Correction of the Class II Division 1 malocclusion utilized a specialized technique called the "reverse pin", reducing vertical side effects. The revised version maintains clarity and key information about the case report and treatment.

The efficacy of a modified mandibular advancement device for OSA treatment in a group of adult patients.

OBJECTIVE: The Mandibular Advancement Device (MAD) is actually recommended for the treatment of Obstructive Sleep Apnea (OSA) with mild or moderate severity. The present study evaluated the effects of a fully customizable MAD-type device (It Makes You Sleep, IMYS), in patients with moderate-to-severe OSA. METHODS: Twenty-nine patients (15 men and 14 women; mean age 62, SD ±10 years) were retrospectively enrolled. Home Sleep Apnea Testing ;(HSAT) was performed for all patients at baseline (T0) and after three months (T1) of IMYS therapy. The analyzed respiratory parameters were: Apnea-Hypopnea Index (AHI), Oxygen Desaturation Index (ODI), Minimum Oxygen Saturation (minSO2) and Medium Oxygen Saturation (medSO2). RESULTS: From T0 to T1, a significant reduction of AHI and ODI was reported, as well as a significant increase of minSO2 and medSO2. CONCLUSION: The IMYS device could be an effective MAD appliance for treating moderate-to-severe OSA.

Evaluation of the relationship between incisor torque and profile aesthetics in patients having orthodontic extractions compared to non-extractions.

OBJECTIVE: The aim of the present study was to evaluate the relationship between soft tissues aesthetics and incisor torque, as well as the effect of crowding, anchorage, and extraction pattern, in adult patients treated without extraction or with two or four extractions. MATERIALS AND METHODS: Seventy-seven subjects with permanent dentition were selected retrospectively. Among these, 24 patients were treated with four extractions, 24 with two extractions and 29 without extractions. Lateral cephalograms and photographies taken before (T0) and after (T1) treatment were retrieved. The amount of crowding and the type of anchorage were recorded, and a cephalometric analysis was performed. A one-way ANOVA was used to compare the variables within and between groups. Linear regressions were performed to evaluate the effect of different predictors on soft tissues variables at T1. RESULTS: The statistical analysis showed no differences within and between groups for soft tissue aesthetics. A significant reduction of the angle obtained from the intersection of Frankfurt plane and mandibular plane was observed in the four-extractions group, and a significant proclination of the lower incisors was observed in the two-extraction group. Linear regressions revealed that the change in soft tissue profile aesthetics was affected by the type of anchorage and the two-extractions pattern. CONCLUSIONS: Similar soft tissue aesthetics were observed after treatment in the three groups, despite the presence of some skeletal and dental differences. CLINICAL RELEVANCE: A well-controlled incisor torque helps to preserve soft tissues aesthetics. The type of anchorage could influence soft tissues.

Correlation between dental arch form and OSA severity in adult patients: an observational study.

BACKGROUND: The role of interdental widths and palatal morphology on the development of obstructive sleep apnea (OSA) has not been well investigated in adult patients yet. The aim of this paper was to assess the morphology of maxilla and mandibular dental arches on three-dimensional (3D) casts and to correlate these measurements with the severity of OSA. METHODS: Sixty-four patients (8 women and 56 men, mean age 52.4) with a diagnosis of mild-to-moderate OSA were retrospectively enrolled. On each patient, home sleep apnea test and 3D dental models were collected. Apnea-hypopnea index (AHI) and oxygen desaturation index (ODI) were recorded, as well as the dental measurements including inter-molar distance, anterior and posterior widths of maxillary and mandibular arches, upper and lower arch lengths, palatal height, and palatal surface area. The respiratory and dental variables were then correlated. RESULT: A statistically inverse correlation was found between ODI and anterior width of lower arch, maxillary arch length, palatal height, and palatal area. AHI showed a significant inverse correlation with anterior width of mandibular arch and maxillary length. CONCLUSION: A significant inverse correlation between maxillary and mandibular morphology and respiratory parameters was shown in the present paper.

Correction of Midline Deviation and Unilateral Crossbite Treated with Fixed Appliance.

The following case report describes the treatment of a 20-year-old man with dental and facial asymmetry. Patient presented upper dental midline shifted 3 mm to right side and the lower one 1 mm to left side, skeletal class I, molar class I and canine class III on the right side, molar class I and canine class II on the left side, and upper and lower crowding on teeth #12, #15, #22, #24, #34, and #35 in crossbite. The treatment plan provided four extractions: in the superior arch the right second and the left first premolar and in the lower arch first premolars on the left and right sides. Wire-fixed orthodontic device was used in combinations with coils to correct the midline deviation and to close post-extractive spaces, avoiding miniscrew implants. At the end of the treatment, optimal functional and aesthetic results were obtained: realignment of the midline improved facial symmetry, correction of the crossbite on both sides, and a good occlusal relationship.

Short-term effect of orthodontic clear aligners on muscular activity and occlusal contacts: A cohort study.

INTRODUCTION: The simultaneous presence of maxillary and mandibular clear aligners alters the vertical dimension and the quantity and quality of occlusal contacts. Few data in the literature explain how this occurs and the effects on neuromuscular coordination. This study aimed to evaluate occlusal contacts and muscular balance during treatment with clear aligners over a short follow-up time. METHODS: Twenty-six female adult patients were enrolled in this study. The center of occlusal force (COF) was evaluated using a T-Scan II device, whereas muscular symmetry and balance were determined through surface electromyography using a standardized protocol that reduces anthropometric and electrode variations. Both evaluations were performed in centric occlusion and with aligners worn before treatment, after 3 months, and after 6 months. RESULTS: A statistically significant variation in COF position was reported in the sagittal plane but not in the transverse plane. The shift in the COF position was followed by a change in muscular balance evaluated through surface electromyography. CONCLUSIONS: Treatment with clear aligners resulted in an anterior shift of the COF when biting in centric occlusion and a posterior shift when the aligners were worn in healthy female patients after 6 months of observation. This change in occlusal contact was followed by an improvement in muscular function symmetry in the short term when aligners were worn, compared with the centric occlusion during treatment.

Neurosensory Alterations and Interleukins Cascade in SARS-CoV-2 Infection - Results from a Retrospective Cohort of COVID-19 Inpatients.

OBJECTIVES: The aim of this study was to relate IL-6 and IL-1ß serum levels with the severity of olfactory disorders and with the type of unperceived odors. METHODS: 82 inpatients (45 men aged 62.3 ± 14.2 and 37 women aged 57.1 ± 12.8) with only smell dysfunctions were divided into two groups. The evaluation of the smell disorder was carried out with a questionnaire to define which sensitivity is most compromised in COVID-19 patients. Cytokine levels were measured with chemiluminescence and ELISA assay. Statistical analyses were performed with the Wilcoxon Rank test, Welch's T-test, and Mann-Whitney test (p < 0.05). RESULTS: Statistically significant differences in IL-6 and IL-1 ß levels were found in moderate disease patients when there was an impairment of trigeminal sensitivity (p <0.05) and trigeminal and olfactory sensitivity. CONCLUSIONS: The results obtained showed that in COVID-19 patients the impairment of trigeminal sensitivity in association with olfactory sensitivity was more prevalent in moderate than in mild forms.