RESUMEN
Different measuring techniques have been used to objectify the classification of hoof shape. The MicroScribe is a novel tool that might prove useful for measuring hooves without prior reconstruction or compensation of projection artefacts. The aim of this study was to compare biometric data of the equine hoof collected by the MicroScribe tool and measurements collected directly from hooves, scaled photographs and radiographs, from photogrammetry models and computed tomography datasets. The suitability of MicroScribe generated data to differentiate individual hoof conformations was tested. A total of 62 measures were recorded from 16 forehooves. 21 linear and nine angular measures were collected by at least four methods each, and evaluated further by analysis of variance (ANOVA) and multivariate analysis of variance (MANOVA). Ratios and differences of these measures were calculated as suitable for the definition of hoof shapes and analysed as well. Absolute equivalency of methods was detected for five linear and none of the angular measurements. The precision of the tested measurement methods was comparable. In some cases, different methods measure different structures. Radiographs tended to overestimate, while computed tomography slides to underestimate distances. Photogrammetry and scaled photographs were less suitable for measuring hoof angles. The MicroScribe tool can readily be used for hoof measurements. Its values for linear measures showed good equivalency with other methods based on real hooves. For angular measurements, the uneven hoof surface might introduce imprecision. Not all hoof conformations could be detected based on measuring results alone. Diagnosis by a skilled veterinarian is still essential.
Asunto(s)
Pezuñas y Garras , Animales , Caballos , Pezuñas y Garras/diagnóstico por imagen , Extremidades , Tomografía Computarizada por Rayos XRESUMEN
Current industrial trends bring new challenges in energy absorbing systems. Polymer materials as the traditional packaging materials seem to be promising due to their low weight, structure, and production price. Based on the review, the linear low-density polyethylene (LLDPE) material was identified as the most promising material for absorbing impact energy. The current paper addresses the identification of the material parameters and the development of a constitutive material model to be used in future designs by virtual prototyping. The paper deals with the experimental measurement of the stress-strain relations of linear low-density polyethylene under static and dynamic loading. The quasi-static measurement was realized in two perpendicular principal directions and was supplemented by a test measurement in the 45° direction, i.e., exactly between the principal directions. The quasi-static stress-strain curves were analyzed as an initial step for dynamic strain rate-dependent material behavior. The dynamic response was tested in a drop tower using a spherical impactor hitting a flat material multi-layered specimen at two different energy levels. The strain rate-dependent material model was identified by optimizing the static material response obtained in the dynamic experiments. The material model was validated by the virtual reconstruction of the experiments and by comparing the numerical results to the experimental ones.
RESUMEN
Despite the wide choice of commercial heart valve prostheses, cryopreserved semilunar allograft heart valves (C-AHV) are required, and successfully transplanted in selected groups of patients. The expiration limit (EL) criteria have not been defined yet. Most Tissue Establishments (TE) use the EL of 5 years. From physiological, functional, and surgical point of view, the morphology and mechanical properties of aortic and pulmonary roots represent basic features limiting the EL of C-AHV. The aim of this work was to review methods of AHV tissue structural analysis and mechanical testing from the perspective of suitability for EL validation studies. Microscopic structure analysis of great arterial wall and semilunar leaflets tissue should clearly demonstrate cells as well as the extracellular matrix components by highly reproducible and specific histological staining procedures. Quantitative morphometry using stereological grids has proved to be effective, as the exact statistics was feasible. From mechanical testing methods, tensile test was the most suitable. Young's moduli of elasticity, ultimate stress and strain were shown to represent most important AHV tissue mechanical characteristics, suitable for exact statistical analysis. C-AHV are prepared by many different protocols, so as each TE has to work out own EL for C-AHV.
Asunto(s)
Válvula Aórtica , Criopreservación , Aloinjertos , Aorta , Válvula Aórtica/cirugía , Módulo de Elasticidad , HumanosRESUMEN
SciPy is an open-source scientific computing library for the Python programming language. Since its initial release in 2001, SciPy has become a de facto standard for leveraging scientific algorithms in Python, with over 600 unique code contributors, thousands of dependent packages, over 100,000 dependent repositories and millions of downloads per year. In this work, we provide an overview of the capabilities and development practices of SciPy 1.0 and highlight some recent technical developments.
Asunto(s)
Algoritmos , Biología Computacional/métodos , Lenguajes de Programación , Programas Informáticos , Biología Computacional/historia , Simulación por Computador , Historia del Siglo XX , Historia del Siglo XXI , Modelos Lineales , Modelos Biológicos , Dinámicas no Lineales , Procesamiento de Señales Asistido por ComputadorRESUMEN
An amendment to this paper has been published and can be accessed via a link at the top of the paper.
RESUMEN
OBJECTIVE: The mechanical properties and microstructure of the perineal body are important for the improvement of numerical models of pelvic organs. We determined the mechanical parameters and volume fractions of the ewe perineal body as an animal model. METHODS: The 39 specimens of 13 pregnant swifter ewes delivering by cesarean section (aged 2 years, weight 61.2â±â6.2âkg (meanâ±âstandard deviation) and 24 specimens of 8 postmenopausal swifter ewes 150 days after surgical ovariectomy (aged 7 years, 58.6â±â4.6âkg)) were loaded uniaxially to determine Young's moduli of elasticity in the small (E0) and large (E1) deformation regions, and ultimate stresses and strains. The 63 adjacent tissue samples were processed histologically to assess volume fractions of smooth and skeletal muscle, adipose cells, elastin, and type I collagen using a stereological point testing grid. We compared the structural and mechanical differences along the ewe perineal body, and between pregnant and postmenopausal groups. RESULTS: The pregnant/postmenopausal perineal body was composed of smooth muscle (12/14%; median), skeletal muscle (12/16%), collagen (10/23%), elastin (8/7%), and adipose cells (6/6%). The E0 was 37/11âkPa (median), E1 was 0.97/1.04âMPa, ultimate stress was 0.55/0.59âMPa, and ultimate strain was 0.90/0.87 for pregnant/postmenopausal perineal body. The perineal body showed a structural and mechanical stability across the sites. The pregnant ewes had a higher amount of skeletal muscle, higher E0, and a less amount of collagen when compared with postmenopausal ewes. CONCLUSIONS: The data can be used as input for models simulating vaginal delivery, pelvic floor prolapsed, or dysfunction.
Asunto(s)
Perineo/anatomía & histología , Perineo/fisiología , Adipocitos , Animales , Fenómenos Biomecánicos , Colágeno/análisis , Elastina/análisis , Femenino , Modelos Animales , Músculo Esquelético/anatomía & histología , Músculo Esquelético/fisiología , Músculo Liso/anatomía & histología , Músculo Liso/fisiología , Posmenopausia , Embarazo , OvinosRESUMEN
The aortic and pulmonary allograft heart valves (AHV) are used in the cardiac surgery for replacing the impaired semilunar valves. They are harvested from donor hearts and cryostored in tissue banks. The expiration period was set to 5 years arbitrarily. We hypothesized that their mechanical and structural properties do not deteriorate after this period. A total of 64 human AHV (31 aortic and 33 pulmonary) of different length of cryopreservation (fresh, 0-5, 5-10, over 10 years) were sampled to different tissue strips (artery, leaflet, ventriculo-arterial junction) and tested by tensile test with loading velocity 10 mm/min until tissue rupture. Neighbouring regions of tissue were processed histologically and evaluated for elastin and collagen area fraction. The results were evaluated statistically. In aortic AHV, the physical deformation response of wall samples to stress did not changed significantly neither during the process of cryopreservation nor during the first 10 years of storage. In pulmonary AHV, the ultimate strain dropped after 5 years of cryopreservation indicating that pulmonary artery was significantly less deformable at the time of rupture. On the other hand, the ultimate stress was equal during the first 10 years of cryostorage. The changes in collagen and elastin amount in the tissue samples were not associated with mechanical impairment. Neither elasticity, stiffness and solidity nor morphology of aortic and pulmonary AHV did not change reasonably with cryopreservation and in the first 10 years of cryostorage. This evidence suggests that the expiration period might be extended in the future.
Asunto(s)
Válvula Aórtica/trasplante , Criopreservación/métodos , Válvula Pulmonar/trasplante , Bancos de Tejidos , Adulto , Colágeno/análisis , Elastina/análisis , Femenino , Humanos , Masculino , Persona de Mediana Edad , Trasplante HomólogoRESUMEN
OBJECTIVE: The perineal body connects muscles from the pelvic floor and is critical for support of the lower part of the vagina and proper function of the anal canal. We determined mechanical parameters and volume fractions of main components of the human female postmenopausal perineal body. METHODS: The specimens were taken from 15 fresh female cadavers (age 74â±â10, meanâ±âstandard deviation). Seventy-five specimens from five regions of the perineal body were processed histologically to assess volume fractions of tissue components using stereological point testing grid. Fifteen specimens taken from the midline region were loaded uniaxially with 6âmm/min velocity until tissue rupture to determine Young's modulus of elasticity, ultimate stresses, and strains. RESULTS: The perineal body was composed of collagen (29%), adipose cells (27%), elastin (7%), smooth muscle (11%), and skeletal muscle (3%). The residual tissue (19%) constituted mostly peripheral nerves, lumina of blood vessels, fibroblasts, and fibrocytes. Young's modulus of elasticity at midline region was 18âkPa (median) at small and 232âkPa at large deformations, respectively. The ultimate stress was 172âkPa and the ultimate strain was 1.4. CONCLUSIONS: We determined the structural and mechanical parameters of the perineal body. The resultant data could be used as input for models simulating pelvic floor prolapse or dysfunction.
Asunto(s)
Fenómenos Biomecánicos/fisiología , Diafragma Pélvico/anatomía & histología , Diafragma Pélvico/fisiología , Perineo/anatomía & histología , Perineo/fisiología , Posmenopausia/fisiología , Tejido Adiposo/anatomía & histología , Anciano , Anciano de 80 o más Años , Canal Anal , Cadáver , Colágeno/análisis , Elasticidad/fisiología , Elastina/análisis , Femenino , Humanos , Persona de Mediana Edad , Músculo Esquelético/anatomía & histología , Músculo Liso/anatomía & histología , Diafragma Pélvico/cirugía , Prolapso de Órgano Pélvico/fisiopatología , Perineo/cirugía , VaginaRESUMEN
The poikilothermic heart has been suggested as a model for studying some of the mechanisms of early postnatal mammalian heart adaptations. We assessed morphological parameters of the carp heart (Cyprinus carpio L.) with diastolic dimensions: heart radius (5.73mm), thickness of the compact (0.50mm) and spongy myocardium (4.34mm), in two conditions (systole, diastole): volume fraction of the compact myocardium (20.7% systole, 19.6% diastole), spongy myocardium (58.9% systole, 62.8% diastole), trabeculae (37.8% systole, 28.6% diastole), and cavities (41.5% systole, 51.9% diastole) within the ventricle; volume fraction of the trabeculae (64.1% systole, 45.5% diastole) and sinuses (35.9% systole, 54.5% diastole) within the spongy myocardium; ratio between the volume of compact and spongy myocardium (0.35 systole, 0.31 diastole); ratio between compact myocardium and trabeculae (0.55 systole, 0.69 diastole); and surface density of the trabeculae (0.095µm(-1) systole, 0.147µm(-1) diastole). We created a mathematical model of the carp heart based on actual morphometric data to simulate how the compact/spongy myocardium ratio, the permeability of the spongy myocardium, and sinus-trabeculae volume fractions within the spongy myocardium influence stroke volume, stroke work, ejection fraction and p-V diagram. Increasing permeability led to increasing and then decreasing stroke volume and work, and increasing ejection fraction. An increased amount of spongy myocardium led to an increased stroke volume, work, and ejection fraction. Varying sinus-trabeculae volume fractions within the spongy myocardium showed that an increased sinus volume fraction led to an increased stroke volume and work, and a decreased ejection fraction.
Asunto(s)
Carpas/fisiología , Modelos Cardiovasculares , Función Ventricular/fisiología , Animales , Carpas/anatomía & histología , Diástole/fisiología , Corazón/anatomía & histología , Ventrículos Cardíacos/anatomía & histología , Volumen Sistólico/fisiología , Sístole/fisiologíaRESUMEN
The orientation of vascular smooth muscle cells of porcine aortae was assessed to test the widely accepted assumption that these smooth muscle cells are arranged in two helices. We used tangential histological sections of 82 samples of five anatomical segments of thoracic and abdominal porcine aortae and three age groups in animals ranging in age from 5 to 210 days. The distribution of the orientation of smooth muscle cell nuclei in five proximodistal segments of the porcine aortae was determined using an algorithm that fitted a mixture of one to five von Mises probability distributions of the data retrieved from histological micrographs. Automated tracking of the nuclei was confirmed by and consistent with manual histological analysis. The orientation of the vascular smooth muscle cells was successfully fitted using two von Mises distributions in most of the samples with different ages, wall thicknesses, and anatomical positions, which corresponds to two populations of vascular smooth muscle cells. A minor fraction of samples also required a tertiary von Mises distribution to describe the orientation of the smooth muscle cell nuclei. The distribution of vascular smooth muscle cells in five aortic segments ranging from the thoracic ascending aorta to the abdominal intrarenal aorta exhibited similar main directions but different shapes. These results are consistent with the widely used model of two muscular helices intermingling in the arterial wall. Furthermore, we calculated the central angles of symmetry and the mean value of angles between the two assumed smooth muscle directions. We also successfully approximated the orientation of the smooth muscle cells using a mixture of von Mises distributions and our open-source software named dist_mixtures. This method is openly available to researchers who are interested in mathematically assessing the orientation of cell nuclei in various tissues.
Asunto(s)
Aorta/fisiología , Miocitos del Músculo Liso/fisiología , Túnica Media/fisiología , Envejecimiento/fisiología , Algoritmos , Animales , Núcleo Celular/metabolismo , Músculo Liso Vascular/citología , Programas Informáticos , Estrés Mecánico , Sus scrofa , Túnica Íntima/fisiologíaRESUMEN
Three-dimensional analyses of the spatial arrangement, spatial orientation and preferential directions of systems of fibers are frequent tasks in many scientific fields, including the textile industry, plant biology and tissue modeling. In biology, systems of oriented and branching lines are often used to represent the three-dimensional directionality and topology of microscopic blood vessels supplying various organs. In our study, we present a novel p(χ²) (chi-square) method for evaluating the anisotropy of line systems that involves comparing the observed length densities of lines with the discrete uniform distribution of an isotropic line system with the χ²-test. Using this method in our open source software, we determined the rose of directions, preferential directions and level of anisotropy of linear systems representing the microscopic blood vessels in samples of various regions from human brains (cortex, subcortical gray matter and white matter). The novel method was compared with two other methods used for anisotropy quantification (ellipsoidal and fractional anisotropy). All three methods detected different levels of anisotropy of blood microvessels in human brain. The microvascular bed in the cortex was closer to an isotropic network, while the microvessels supplying the white matter appeared to be an anisotropic and direction-sensitive system. All three methods were able to determine the differences between various brain regions. The advantage of our p(χ²) method is its high correlation with the number of preferential directions of the line system. However, the software, named esofspy, is able to calculate all three of the measures of anisotropy compared and documented in this paper, thus making the methods freely available to the scientific community.