RESUMEN
For multi-phase soft matter systems, optical microscopy is frequently employed to distinguish the different phases. Unfortunately, optical microscopy does not succeed in all cases. Consequently, researchers sometimes require more advanced imaging techniques with superior resolution or sample penetration capabilities. One such complex system is a mixed aqueous-and-oil foam stabilised by colloidal particles, which is composed of two immiscible foams organised as the dispersed and continuous phases of an emulsion. While its morphology has been extensively studied using fluorescence confocal microscopy, not all questions have been answered. While the aqueous phase bubble interfaces are stabilised by silica particles and the oil phase bubble interfaces are stabilised by fluorinated particles, it remains to be seen how the aqueous-oil interfaces are stabilised. Hence, to gain insights into the role of the different particles at the interfaces, we employ cryogenic scanning electron microscopy (Cryo-SEM) and energy-dispersive X-ray spectroscopy (EDS). We find that the hydrophobic silica particles reside at both the aqueous-air and aqueous-oil interfaces. In contrast, the fluorinated particles, which exhibit hydrophobic and oleophobic properties simultaneously, are exclusively found at the oil-air interfaces.
RESUMEN
One approach to achieving low-calorie foods is to substitute regions of high-calorie content with water droplets, forming water-in-oil emulsions. However, in complex food systems consisting of multiple species of dispersed phases, compositional ripening may occur in which the emulsified water undergoes mass transfer to droplets filled with a species that is less soluble in the continuous phase, for example sugar. Here we present two model systems and use them to study compositional ripening for water-in-oil Pickering emulsions. Water-in-dodecane and water-in-tributyrin emulsions stabilised by PMMA particles were prepared and combined with similar emulsions that included sugar in the water. We use confocal microscopy as a function of time combined with particle tracking to explore how these systems evolve in time. For dodecane, as the system evolves, the pure water droplets appear to crumple due to the loss of water; in extreme cases, they eventually 'explode'. Simultaneously, the sugar-filled droplets expand and slowly coalesce. Evidently, our interfacial coating of particles is unable to suppress compositional ripening. In contrast, pure water droplets in tributyrin crumple into small stable structures, potentially retaining water. We show that decreasing the concentration of the sugar solution also decreases the rate of change of water droplet size for both oils. Observations of droplet 'explosions' confirm that the driving force can overcome the trapping of the particles at the interface, in contrast to the case of Ostwald ripening. However the crumpled states in the tributyrin system provide some indication that this effect can be overcome.
RESUMEN
Stimuli-responsive emulsions offer a dual advantage, combining long-term storage with controlled release triggered by external cues such as pH or temperature changes. This study establishes that thermo-responsive emulsion behaviour is primarily determined by interactions between, rather than within, interfaces. Consequently, the stability of these emulsions is intricately tied to the nature of the stabilizing microgel particles - whether they are more polymeric or colloidal, and the morphology they assume at the liquid interface. The colloidal properties of the microgels provide the foundation for the long-term stability of Pickering emulsions. However, limited deformability can lead to non-responsive emulsions. Conversely, the polymeric properties of the microgels enable them to spread and flatten at the liquid interface, enabling stimuli-responsive behaviour. Furthermore, microgels shared between two emulsion droplets in flocculated emulsions facilitate stimuli-responsiveness, regardless of their internal architecture. This underscores the pivotal role of microgel morphology and the forces they exert on liquid interfaces in the control and design of stimuli-responsive emulsions and interfaces.
RESUMEN
This work reviews the use of atomic force microscopy (AFM) as a tool to investigate oleogels of edible triglyceride oils. Specific attention is given to those oleogels based on phytosterols and their esters, a class of material the authors have studied extensively. This work consists of a summary of the role of AFM in imaging edible oleogels, including the processing and preparation steps required to obtain high-quality AFM images of them. Finally, there is a comparison between AFM and other techniques that may be used to obtain structural information from oleogel samples. The aim of this review is to provide a useful introduction and summary of the technique for researchers in the fields of gels and food sciences looking to perform AFM measurements on edible oleogels.
RESUMEN
HYPOTHESIS: Because particle-stabilised foams are extremely stable and have a yield stress, a particle-stabilised aqueous foam and a particle-stabilised oil foam can be mixed together to give a stable composite foam which brings together two immiscible liquids. EXPERIMENTS: We have developed a mixed foam system comprised of an olive oil foam with bubbles stabilised using partially fluorinated particles and an aqueous foam with bubbles stabilised using hydrophobic silica particles. The aqueous phase is a mixture of water and propylene glycol. We have studied this system using bulk observations, confocal microscopy and rheology as we vary the proportions of the two foams, the silica particles and the propylene glycol, and the sample age. FINDINGS: The composite foam resembles an emulsion of one foam within another and is stable for a week or more. The structure and flow properties depend on the proportions of the two phases and the quantities of both silica particles and propylene glycol. Inversion between water-in-oil and oil-in-water is observed, where both phases are foams, driven both by silica wettability and by adding increasing quantities of the dispersed foam. Composites formed at the inversion point are the least stable, showing significant phase separation in less than one week.
RESUMEN
This study provides the first mapping of mycoprotein functionality, composition and structure throughout the Quorn fermentation process. The fermentation broth, RNA-reduced broth (RNA-broth), centrate and their centrifugation deposits and supernatants were characterised. The broth, RNA-broth and their deposits displayed high concentrations of fungal filaments, which contributed to their high gelling properties (with a 5,320 Pa elastic modulus reported for RNA-broth deposits gels). Foams prepared with RNA-broth and centrate supernatants via frothing exhibited high stability (380 min), with high concentrations of a foam-positive cerato-platanin reported in these samples. Emulsions prepared with the broth and broth supernatant showed high emulsifying activity and stability indexes (12.80 m2/g and 15.84 mins for the broth supernatant) and low oil droplet sizes (18.09 µm for the broth). This study identified previously unreported gelling, foaming and/or emulsifying properties for the different Quorn streams, highlighting opportunities to develop novel sustainable alternatives to animal-derived functional ingredients using mycoprotein material.
Asunto(s)
Proteínas Fúngicas , ARN , Animales , FermentaciónRESUMEN
We describe an experimental technique for the production of foams comprised of bubbles in a continuous phase of balanced quantities of aqueous and oil phases. Initially, two highly stable foams are fabricated: one typically made from olive oil with bubbles stabilized using partially fluorinated particles and the other made from a mixture of water and propylene glycol with bubbles stabilized using partially hydrophobic particles. After a rough mixture is prepared, the final mixed foam is fabricated via spinning the components together; the spinning leads to the final foam being well-mixed and dry. Here the final mixed foams are presented in thin-film form. We show the locations and roles of the various components.
Asunto(s)
Propilenglicol , Agua , Aerosoles , Interacciones Hidrofóbicas e Hidrofílicas , Agua/químicaRESUMEN
Oleogels based on sterols such as ß-sitosterol blended with the sterol ester γ-oryzanol are a very interesting class of systems, but there are aspects of their formation and structure that remain elusive. It has previously been shown that a methyl group on the C30 position of the sterol-ester plays an important role in gelation. This work explored the effect that having C30 methyl groups on both the sterol and the sterol-ester had on the gelation process and subsequent gel structure. Lanosterol and saponified γ-oryzanol (which was synthesized as part of this study) were identified as materials of interest, as both feature a methyl group on the C30 position of their steroidal cores. It was observed that both sterols formed gels when blended with γ-oryzanol, and also that lanosterol gelled sunflower oil without the addition of γ-oryzanol. All of these gels were significantly weaker than that formed by ß-sitosterol blended with γ-oryzanol. To explore why, molecular docking simulations along with AFM and SAXS were used to examine these gels on a broad range of length scales. The results suggest that saponified γ-oryzanol-γ-oryzanol gels have a very similar structure to that of ß-sitosterol-γ-oryzanol gels. Lanosterol-γ-oryzanol gels and pure lanosterol gel, however, form with a totally different structure facilitated by the head-to-tail stacking motif exhibited by lanosterol. These results give further evidence that relatively slight changes to the molecular structure of gelators can result in significant differences in subsequent gel properties.
RESUMEN
High-internal phase emulsions (HIPEs) were considered as an important functional material and have been the focus of intense development effort, but their fundamental attributes have hardly been altered at either the microcosmic or macroscopic level, which severely limits their practical applications in various areas. In this work, we report a general strategy for creating complex HIPEs that can form interfacial films at liquid interfaces. Double HIPEs and Janus HIPEs are both realized for the first time. They feature complex microscopic patterns with short-range anisotropy and exhibit non-Newtonian pseudoplastic flow behavior. By taking advantage of their response to a high-pH subphase, interfacial films can be successfully obtained, which are tunable in thickness and morphologies under compression. Complex HIPEs can greatly expand the applications of liquid materials, and the interfacial films of droplets represent an important step toward producing 2D soft materials with a unique functionality that can be broadly applied to biological processes.
Asunto(s)
EmulsionesRESUMEN
While studies carried out in a Langmuir trough have rigorously demonstrated that, at high surface pressure, ellipsoidal particles do flip and spherocylinders (rods) can flip, much less is known about the practical situation on the surface of a droplet or bubble. We present emulsification studies using colloidal rods and find that the droplets are bridged by the rods independent of shear rate and particle concentration and are only weakly dependent on the pH of the continuous phase. In a trough, it is the low aspect ratio rods which flip and the high aspect ratio rods which form bilayers; on the surface of a droplet we found that the high aspect ratio rods always bridge whereas the shorter rods show random bridging behavior. Hence, the behavior of anisotropic particles "in action" is essentially opposite to expectations from trough studies.
RESUMEN
Machine learning is making a major impact in materials research. I review current progress across a selection of areas of ubiquitous soft matter. When applied to particle tracking, machine learning using convolution neural networks is providing impressive performance but there remain some significant problems to solve. Characterising ordered arrangements of particles is a huge challenge and machine learning has been deployed to create the description, perform the classification and tease out an interpretation using a wide array of techniques often with good success. In glass research, machine learning has proved decisive in quantifying very subtle correlations between the local structure around a site and the susceptibility towards a rearrangement event at that site. There are also beginning to be some impressive attempts to deploy machine learning in the design of composite soft materials. The discovery aspect of this new materials design meets the current interest in teaching algorithms to learn to extrapolate beyond the training data.
RESUMEN
HYPOTHESIS: The aggregation of protein-stabilised emulsions leads to the formation of emulsion gels. These soft solids may be envisioned as droplet-filled matrices. Here however, it is assumed that protein-coated sub-micron droplets contribute to the network formation in a similar way to proteins. Emulsion gels are thus envisioned as composite networks made of proteins and droplets. EXPERIMENTS: Emulsion gels with a wide range of composition are prepared and their viscoelasticity and frequency dependence are measured. Their rheological behaviours are then analysed and compared with the properties of pure gels presented in the first part of this study. FINDINGS: When the concentrations of droplets and protein are expressed as an effective volume fraction, the rheological behaviour of emulsion gels is shown to depend mostly on the total volume fraction, while the composition of the gel indicates its level of similarity with either pure droplet gels or pure protein gels. These results help to form an emerging picture of protein-stabilised emulsion gel as intermediate between droplet and protein gels. This justifies a posteriori the hypothesis of composite networks, and opens the road for the formulation of emulsion gels with fine-tuned rheology.
Asunto(s)
Emulsiones , Geles , Reología , ViscosidadRESUMEN
HYPOTHESIS: Protein-stabilised emulsion gels can be studied in the theoretical framework of colloidal gels, because both protein assemblies and droplets may be considered as soft colloids. These particles differ in their nature, size and softness, and these differences may have an influence on the rheological properties of the gels they form. EXPERIMENTS: Pure gels made of milk proteins (sodium caseinate), or of sub-micron protein-stabilised droplets, were prepared by slow acidification of suspensions at various concentrations. Their microstructure was characterised, their viscoelasticity, both in the linear and non-linear regime, and their frequency dependence were measured, and the behaviour of the two types of gels was compared. FINDINGS: Protein gels and droplet gels were found to have broadly similar microstructure and rheological properties when compared at fixed volume fraction, a parameter derived from the study of the viscosity of the suspensions formed by proteins and by droplets. The viscoelasticity displayed a power law behaviour in concentration, as did the storage modulus in frequency. Additionally, strain hardening was found to occur at low concentration. These behaviours differed slightly between protein gels and droplet gels, showing that some specific properties of the primary colloidal particles play a role in the development of the rheological properties of the gels.
Asunto(s)
Caseínas , Emulsiones , Geles , Reología , ViscosidadRESUMEN
Here we study emulsification in a model experimental system comprised of water, an oil and colloidal particles. The particles are charge-stabilised colloidal silica; unsurprisingly, by varying the concentration of salt the degree of flocculation of the particles can be modified. The influence of salt on the formation of particle-stabilised oil droplets goes well beyond considerations of the colloidal stability of the particles. Our results demonstrate that the influence of salt on the particle-particle interaction is less important for emulsion formation than the influence of salt on both the particle wettability and the particle-interface interaction.
RESUMEN
Bicontinuous interfacially jammed emulsion gels (bijels) are novel composite materials that can be challenging to manufacture. As a step towards automating production, we have developed a machine learning tool to classify fabrication attempts. We use training and testing data in the form of confocal images from both successful and unsuccessful attempts at bijel fabrication. We then apply machine learning techniques to this data in order to classify whether an image is a bijel or a non-bijel. Our principal approach is to process the images to find their autocorrelation function and structure factor, and from these functions we identify variables that can be used for training a supervised machine learning model to identify a bijel image. We are able to categorise images with reasonable accuracies of 85.4% and 87.5% for two different approaches. We find that using both the liquid and particle channels helps to achieve optimal performance and that successful classification relies on the bijel samples sharing a characteristic length scale. Our second approach is to classify the shapes of the liquid domains directly; the shape descriptors are then used to classify fabrication attempts via a decision tree. We have used an adaptive design approach to find an image pre-processing step that yields the optimal classification results. Again, we find that the characteristic length scale of the images is crucial in performing the classification.
RESUMEN
Bijels (bicontinuous interfacially jammed emulsion gels) have the potential to be useful in many different applications due to their internal connectivity and the possibility of efficient mass transport through the channels. Recently, new methods of making the bijel have been proposed, which simplify the fabrication process, making commercial application more realistic. Here, we study the flow properties of bijels prepared by mixing alone using oscillatory rheology combined with confocal microscopy and also squeezing flow experiments. We found that the bijel undergoes a two-step yielding process where the first step corresponds to the fluidizing of the interface, allowing the motion of the structure, and the second step corresponds to the breaking of the structure. In the squeeze flow experiments, the yield stress of the bijel is observed to show a power law dependence on squeezing speed. However, when stress in excess of yield stress is plotted against shear rate, all the different squeeze flow data show a superposition.
RESUMEN
This work reveals the association between the morphological evolutions in particle-stabilized binary-component systems (i.e., binary liquids and polymer blends). It investigates the formation mechanism of bijels created via direct mixing, and proposes an empirical cost function to quantitatively evaluate the created structures.
RESUMEN
By developing a deeper understanding of the formation mechanism and the origin of the stability, we report a simple and large-scale fabrication approach to create Janus emulsions that can be controlled in size, geometry and stability.
RESUMEN
In this work, we have employed docking and atomistic molecular dynamics (MD) simulations supported by complementary experiments using atomic force microscopy, rheology, and spectroscopy to investigate the self-assembled structure of ß-sitosterol and γ-oryzanol molecules into cylindrical tubules in a nonaqueous solvent. Docking models of several phytosterols, including sitosterol, with oryzanol and other sterol esters demonstrate that for systems to form tubules, the phytosterol sterane group must be stacked in a wedge shape with the ester sterane group and a hydrogen bond must form between the hydroxyl group of the phytosterol and the carbonyl group of the ester. MD of the self-assembled structure were initiated with the molecules in a roughly cylindrical configuration, as suggested from previous experimental studies, and the configurations were found to be stable during 50 ns simulations. We performed MD simulations of two tubules in proximity to better understand the aggregation of these fibrils and how the fibrils interact in order to stick together. We found that an interfibril network of noncovalent bonds, in particular van der Waals and π-π contacts, which is formed between the ferulic acid groups of oryzanol through the hydroxyl, methoxy, and aromatic groups, is responsible for the surface-to-surface interactions between fibrils; an observation supported by molecular spectroscopy. We believe that these interactions are of primary importance in creating a strong organogel network.
RESUMEN
We present experimental studies of two aqueous drops, stabilized by colloidal silica, which are placed close to each other in a bath of toluene, ethanol and surplus colloidal silica. If one of the drops is enriched in ethanol while the other is pure water then we observe the spontaneous formation of small droplets at the surface of the water drop closest to its neighbour. These droplets are then observed to form all along the path to the ethanol enriched drop until they make a complete bridge. We relate this behaviour to the diffusion pathways on the underlying three-fluid phase diagram. We argue that the phenomena is a version of compositional ripening where the transfer of the dispersed phase leads to the spontaneous formation of droplets in the continuous phase. We show that, while the large drops are particle-stabilized, the spontaneously formed droplets are not. Instead the presence of surplus particles leads to the droplets gelling as an elastic bridge. The phenomenology at long times and at low particle concentrations becomes increasingly surprising.