RESUMEN
Contamination of water by toxic dyes is a serious environmental problem. Adsorbents prepared by an environmentally safe route have stood out for application in pollutant removal. Herein, iron oxide-based nanomaterial composed of Fe(III)-OOH and Fe(II/III) bound to proanthocyanidins, with particles in the order of 20 nm, was prepared by green synthesis assisted by extract of açaí (Euterpe oleracea Mart.) berry seeds from an agro-industrial residue. The nanomaterial was applied in the adsorption of cationic dyes. Screening tests were carried out for methylene blue (MB), resulting in an outstanding maximum adsorption capacity of 531.8 mg g-1 at 343 K, pH 10, 180 min. The kinetics followed a pseudo-second-order model and the isotherm of Fritz-Schülnder provided the best fit. Thermodynamic data show an endothermic process with entropy increase, typical of chemisorption. The proposed mechanism is based on the multilayer formation over a heterogeneous adsorbent surface, with chemical and electrostatic interactions of MB with the iron oxide nanoparticles and with the proanthocyanidins. The high adsorption efficiency was attributed to the network formed by the polymeric proanthocyanidins that entangled and protected the iron oxide nanoparticles, which allowed the reuse of the nanomaterial for seven cycles without loss of adsorption efficiency.
Asunto(s)
Euterpe , Proantocianidinas , Contaminantes Químicos del Agua , Compuestos Férricos , Colorantes , Adsorción , Termodinámica , Cinética , Contaminantes Químicos del Agua/análisis , Concentración de Iones de Hidrógeno , Azul de Metileno/químicaRESUMEN
This study compares the morphology, thermal, and dynamic-mechanical properties of composites based on polybutylene adipate terephthalate/polylactide biocomposites with sponge gourd waste treated code as R, and non-treated sponge gourd, coded as NR, by mechanical disc refining after milled process. Extrusion followed by compression molding was used to produce biocomposites with fiber contents of 0, 2.5, 5, 10, and 15% wt/wt for R and NR sponge gourd fibers. Scanning electron microscopy analysis reveals that NR has the morphology of a rigid tubular shape, whereas R is a thinner, twisted, and fibrillated fiber. Regardless of the type of sponge gourd fiber used, the thermal stability of the composite decreases as the sponge gourd content increases. At 25°C, the biocomposite with 10%wt/wt R fiber has the highest storage modulus value. The comparison of Tangent ï¤ peak values reveals that the presence of sponge gourd fibers reduces the energy dissipation of the biocomposites. The analysis of the loss modulus at 25°C reveals that R fiber contributes more to the reduction of energy dissipation of the biocomposites than NR. Furthermore, the Cole-Cole plot shows that R and NR fibers are dispersed and do not significantly change the homogeneity of the biopolymer systems.
Asunto(s)
Adipatos , Gastrópodos , AnimalesRESUMEN
This study assessed the influence of pH variation on the volumetric change of EndoSequence BC Sealer compared to AH Plus Jet. Eighteen single-rooted teeth were uniformly prepared and filled with one of the sealers. After 24-h storing, samples were scanned in a micro-CT device. Then, roots were immersed in 20 ml phosphate-buffered saline (PBS) with pH of 5, 7 or 12 at 37°C for 7 and 30 days and rescanned. Statistical analysis was performed using Shapiro-Wilk's test, one-way ANOVA and Tukey's or Student's t-tests (p < 0.05). Differences between sealers were observed only at neutral pH and after 30 days of acidic pH exposure, with a higher loss of EndoSequence (p < 0.05). After 7 days, alkaline pH reduced and increased the volumetric loss of EndoSequence and AH Plus, respectively, compared to neutral pH (p < 0.05). It can be concluded that the pH directly influenced the volumetric change of both tested root canal sealers in different ways.
Asunto(s)
Resinas Epoxi , Materiales de Obturación del Conducto Radicular , Humanos , Microtomografía por Rayos X , Compuestos de Calcio , Silicatos , Concentración de Iones de Hidrógeno , Ensayo de Materiales , Cavidad Pulpar/diagnóstico por imagenRESUMEN
Ecological conditions shape (adaptive) responses at the molecular, anatomical, and behavioral levels. Understanding these responses is key to predict the outcomes of intra- and inter-specific competitions and the evolutionary trajectory of populations. Recent technological advances have enabled large-scale molecular (e.g., RNAseq) and behavioral (e.g., computer vision) studies, but the study of anatomical responses to ecological conditions has lagged behind. Here, we highlight the role of X-ray micro-computed tomography (micro-CT) in generating in vivo and ex vivo 3D imaging of anatomical structures, which can enable insights into adaptive anatomical responses to ecological environments. To demonstrate the application of this method, we manipulated the larval density of Drosophila melanogaster Meigen flies and applied micro-CT to investigate the anatomical responses of the male reproductive organs to varying intraspecific competition levels during development. Our data is suggestive of two classes of anatomical responses which broadly agree with sexual selection theory: increasing larval density led to testes and ejaculatory duct to be overall larger (in volume), while the volume of accessory glands and, to a lesser extent, ejaculatory duct decreased. These two distinct classes of anatomical responses might reflect shared developmental regulation of the structures of the male reproductive system. Overall, we show that micro-CT can be an important tool to advance the study of anatomical (adaptive) responses to ecological environments.
Asunto(s)
Drosophila melanogaster , Drosophila , Animales , Drosophila melanogaster/fisiología , Genitales Masculinos/diagnóstico por imagen , Larva , Masculino , Microtomografía por Rayos X/métodosRESUMEN
Synchrotron radiation phase-contrast microtomography is sensitive to low attenuating tissues, giving an alternative visualisation of the sample and being useful for investigating microstructure inside biological specimens without staining them with a contrast medium. The phase-contrast technique has been widely used in the scientific community, as it is a technique associated with radiography and microscopy and able to enhance contrast in soft tissues, specifically at the edges, showing details that could not be seen by the absorption technique. This work aims to show the ability of synchrotron-based phase-contrast microtomography for the visualisation of soft tissues and hard internal structures of millimetre-sized biological organisms. Case studies of the anatomy of Rhodnius prolixus head and Thoropa miliaris tadpole are presented to illustrate the imaging technique.
RESUMEN
PURPOSE: In the context of synchrotron microtomography using propagation-based phase-contrast imaging (XSPCT), we evaluated the performance of semiautomatic and automatic image segmentation of soft biological structures by means of Dice Similarity Coefficient (DSC) and volume quantification. METHODS: We took advantage of the phase-contrast effects of XSPCT to provide enhanced object boundaries and improved visualization of the lenses of the frog Thoropa miliaris. Then, we applied semiautomatic segmentation methods 1 and 2 (Interpolation and Watershed, respectively) and method 3, an automatic segmentation algorithm using the U-Net architecture, to the reconstructed images. DSC and volume quantification of the lenses were used to quantify the performance of image segmentation methods. RESULTS: Comparing the lenses segmented by the three methods, the most pronounced difference in volume quantification was between methods 1 and 3: a reduction of 4.24%. Method 1, 2 and 3 obtained the global average DSC of 97.02%, 95.41% and 89.29%, respectively. Although it obtained the lowest DSC, method 3 performed the segmentation in a matter of seconds, while the semiautomatic methods had the average time to segment the lenses around 1 h and 30 min. CONCLUSIONS: Our results suggest that the performance of U-Net was impaired due to the irregularities of the ROI edges mainly in its lower and upper regions, but it still showed high accuracy (DSC = 89.29%) with significantly reduced segmentation time compared to the semiautomatic methods. Besides, with the present work we have established a baseline for future assessments of Deep Neural Networks applied to XSPCT volumes.