Alginate in corneal tissue engineering.

Corneal blindness is the major cause of vision impairment and the fourth-largest leading cause of blindness worldwide. An allograft corneal transplant is the most routine treatment for visual loss. Further complications can occur, such as transplant rejection, astigmatism, glaucoma, uveitis, retinal detachment, corneal ulceration due to reopening of the surgical wounds, and infection. For patients with autoimmune disorders, allografting for chemical burns and infections is contraindicated because of the risk of disease transmission and further complications. Moreover, corrective eye surgery renders the corneas unsuitable for allografting, further increasing the gap between donor tissue demand and supply. Due to these challenges, other therapeutic strategies such as artificial alternatives to donor corneal tissue are being considered. This review focuses on the use of alginate as a building block of therapeutic drugs or cell delivery systems to enhance drug retention and encourage corneal regeneration. The similarity of alginate hydrogel water content to native corneal tissue makes it a promising support structure. Alginate possess desired drug carrier characteristics, such as mucoadhesiveness and penetration enhancing properties. Whilst alginates have been extensively studied for their application in tissue engineering (TE), with many reviews being published, no reviews exist to our knowledge directly looking at alginates for corneal applications. The role of alginate in drug delivery to the surface of the eye and as a support structure (bioinspired tissue scaffold) for corneal TE is discussed. Biofabrication techniques such as gel casting, electrospinning, and bioprinting to develop tissue precursors and substitutes are compared. Finally, cell and tissue encapsulation in alginate for storage and transport to expand the scope of cell-based therapy for corneal blindness is also discussed in the light of recent applications of alginate in maintaining the function of biofabricated constructs for storage and transport.

Storable Cell-Laden Alginate Based Bioinks for 3D Biofabrication.

Over the last decade, progress in three dimensional (3D) bioprinting has advanced considerably. The ability to fabricate complex 3D structures containing live cells for drug discovery and tissue engineering has huge potential. To realise successful clinical translation, biologistics need to be considered. Refinements in the storage and transportation process from sites of manufacture to the clinic will enhance the success of future clinical translation. One of the most important components for successful 3D printing is the 'bioink', the cell-laden biomaterial used to create the printed structure. Hydrogels are favoured bioinks used in extrusion-based bioprinting. Alginate, a natural biopolymer, has been widely used due to its biocompatibility, tunable properties, rapid gelation, low cost, and easy modification to direct cell behaviour. Alginate has previously demonstrated the ability to preserve cell viability and function during controlled room temperature (CRT) storage and shipment. The novelty of this research lies in the development of a simple and cost-effective hermetic system whereby alginate-encapsulated cells can be stored at CRT before being reformulated into an extrudable bioink for on-demand 3D bioprinting of cell-laden constructs. To our knowledge the use of the same biomaterial (alginate) for storage and on-demand 3D bio-printing of cells has not been previously investigated. A straightforward four-step process was used where crosslinked alginate containing human adipose-derived stem cells was stored at CRT before degelation and subsequent mixing with a second alginate. The printability of the resulting bioink, using an extrusion-based bioprinter, was found to be dependent upon the concentration of the second alginate, with 4 and 5% (w/v) being optimal. Following storage at 15 °C for one week, alginate-encapsulated human adipose-derived stem cells exhibited a high viable cell recovery of 88 ± 18%. Stored cells subsequently printed within 3D lattice constructs, exhibited excellent post-print viability and even distribution. This represents a simple, adaptable method by which room temperature storage and biofabrication can be integrated for on-demand bioprinting.

Milliscale Substrate Curvature Promotes Myoblast Self-Organization and Differentiation.

Biological tissues comprise complex structural environments known to influence cell behavior via multiple interdependent sensing and transduction mechanisms. Yet, and despite the predominantly nonplanar geometry of these environments, the impact of tissue-size (milliscale) curvature on cell behavior is largely overlooked or underestimated. This study explores how concave, hemicylinder-shaped surfaces 3-50 mm in diameter affect the migration, proliferation, orientation, and differentiation of C2C12 myoblasts. Notably, these milliscale cues significantly affect cell responses compared with planar substrates, with myoblasts grown on surfaces 7.5-15 mm in diameter showing prevalent migration and alignment parallel to the curvature axis. Moreover, surfaces within this curvature range promote myoblast differentiation and the formation of denser, more compact tissues comprising highly oriented multinucleated myotubes. Based on the similarity of effects, it is further proposed that myoblast susceptibility to substrate curvature depends on mechanotransduction signaling. This model thus supports the notion that cellular responses to substrate curvature and compliance share the same molecular pathways and that control of cell behavior can be achieved via modulation of either individual parameter or in combination. This correlation is relevant for elucidating how muscle tissue forms and heals, as well as for designing better biomaterials and more appropriate cell-surface interfaces.

Effect of isolation method on human corneal stromal cell behaviour.

Current research on healthy corneal stromal cells will typically use primary cells as they are the most representative of in vivo behaviour. Primary cells are normally isolated from the limbus of discarded donor peripheral corneal tissue left over from transplantation (due to its relative abundance). Therefore, the central part of the cornea is less used in research as this tissue is usually used for transplantation. In some cases, although rare, the whole cornea, can become available for research. It is important to keep in mind that these corneas often have longer storage time, but the use of the central tissue for research is even more interesting, as knowing what cells are being transplanted into recipients would be highly relevant. To this end, stromal cells were extracted from both the limbus and central button of healthy corneas donated for research. This allowed for important comparison between central and limbal cells in culture. Of interest here was the extraction method of stromal cells from the donor tissue. The two most common methods of extraction are enzyme digestion and explant migration. However, no work has been done to understand how each method relatively affects the extracted cells. The extraction method and location from which stromal cells are harvested seems to have a significant effect on the cell adherence, survival, and gene expression of the stromal cells in culture. Enzyme digested cells showed that limbal and central cells had different gene expressions prior to culture, with gene such as ALDH3A1 being much more expressed in limbal cells. Enzyme digesting the limbal ring seems to yield the hardiest populations of stromal cells, a desirable trait in the culture of primary cells.

Use of biomaterials in corneal endothelial repair.

Human corneal endothelium (HCE) is a single layer of hexagonal cells that lines the posterior surface of the cornea. It forms the barrier that separates the aqueous humor from the rest of the corneal layers (stroma and epithelium layer). This layer plays a fundamental role in maintaining the hydration and transparency of the cornea, which in turn ensures a clear vision. In vivo, human corneal endothelial cells (HCECs) are generally believed to be nonproliferating. In many cases, due to their nonproliferative nature, any damage to these cells can lead to further issues with Descemet's membrane (DM), stroma and epithelium which may ultimately lead to hazy vision and blindness. Endothelial keratoplasties such as Descemet's stripping automated endothelial keratoplasty (DSAEK) and Descemet's membrane endothelial keratoplasty (DEK) are the standard surgeries routinely used to restore vision following endothelial failure. Basically, these two similar surgical techniques involve the replacement of the diseased endothelial layer in the center of the cornea by a healthy layer taken from a donor cornea. Globally, eye banks are facing an increased demand to provide corneas that have suitable features for transplantation. Consequently, it can be stated that there is a significant shortage of corneal grafting tissue; for every 70 corneas required, only 1 is available. Nowadays, eye banks face long waiting lists due to shortage of donors, seriously aggravated when compared with previous years, due to the global COVID-19 pandemic. Thus, there is an urgent need to find alternative and more sustainable sources for treating endothelial diseases, such as utilizing bioengineering to use of biomaterials as a remedy. The current review focuses on the use of biomaterials to repair the corneal endothelium. A range of biomaterials have been considered based on their promising results and outstanding features, including previous studies and their key findings in the context of each biomaterial.

Response of human oral mucosal epithelial cells to different storage temperatures: A structural and transcriptional study.

PURPOSE: Seeking to improve the access to regenerative medicine, this study investigated the structural and transcriptional effects of storage temperature on human oral mucosal epithelial cells (OMECs). METHODS: Cells were stored at four different temperatures (4°C, 12°C, 24°C and 37°C) for two weeks. Then, the morphology, cell viability and differential gene expression were examined using light and scanning electron microscopy, trypan blue exclusion test and TaqMan gene expression array cards, respectively. RESULTS: Cells stored at 4°C had the most similar morphology to non-stored controls with the highest viability rate (58%), whereas the 37°C group was most dissimilar with no living cells. The genes involved in stress-induced growth arrest (GADD45B) and cell proliferation inhibition (TGFB2) were upregulated at 12°C and 24°C. Upregulation was also observed in multifunctional genes responsible for morphology, growth, adhesion and motility such as EFEMP1 (12°C) and EPHA4 (4°C-24°C). Among genes used as differentiation markers, PPARA and TP53 (along with its associated gene CDKN1A) were downregulated in all temperature conditions, whereas KRT1 and KRT10 were either unchanged (4°C) or downregulated (24°C and 12°C; and 24°C, respectively), except for upregulation at 12°C for KRT1. CONCLUSIONS: Cells stored at 12°C and 24°C were stressed, although the expression levels of some adhesion-, growth- and apoptosis-related genes were favourable. Collectively, this study suggests that 4°C is the optimal storage temperature for maintenance of structure, viability and function of OMECs after two weeks.

Biomechanical Modulation Therapy-A Stem Cell Therapy Without Stem Cells for the Treatment of Severe Ocular Burns.

Ocular injuries caused by chemical and thermal burns are often unmanageable and frequently result in disfigurement, corneal haze/opacification, and vision loss. Currently, a considerable number of surgical and pharmacological approaches are available to treat such injuries at either an acute or a chronic stage. However, these existing interventions are mainly directed at (and limited to) suppressing corneal inflammation and neovascularization while promoting re-epithelialization. Reconstruction of the ocular surface represents a suitable but last-option recourse in cases where epithelial healing is severely impaired, such as due to limbal stem cell deficiency. In this concise review, we discuss how biomechanical modulation therapy (BMT) may represent a more effective approach to promoting the regeneration of ocular tissues affected by burn injuries via restoration of the limbal stem cell niche. Specifically, the scientific basis supporting this new therapeutic modality is described, along with our growing understanding of the role that tissue biomechanics plays in stem cell fate and function. The potential impact of BMT as a future treatment option for the management of injuries affecting tissue compliance is also further discussed.

Scale-Up Technologies for the Manufacture of Adherent Cells.

Great importance is being given to the impact our food supply chain and consumers' food habits are having on the environment, human health, and animal welfare. One of the latest developments aiming at positively changing the food ecosystem is represented by cultured meat. This form of cellular agriculture has the objective to generate slaughter-free meat products starting from the cultivation of few cells harvested from the animal tissue of interest. As a consequence, a large number of cells has to be generated at a reasonable cost. Just to give an idea of the scale, there were billions of cells just in a bite of the first cultured-meat burger. Thus, one of the major challenges faced by the scientists involved in this new ambitious and fascinating field, is how to efficiently scale-up cell manufacture. Considering the great potential presented by cultured meat, audiences from different backgrounds are very interested in this topic and eager to be informed of the challenges and possible solutions in this area. In light of this, we will provide an overview of the main existing bioprocessing technologies used to scale-up adherent cells at a small and large scale. Thus, giving a brief technical description of these bioprocesses, with the main associated advantages and disadvantages. Moreover, we will introduce an alternative solution we believe has the potential to revolutionize the way adherent cells are grown, helping cultured meat become a reality.

Hypothermically Stored Adipose-Derived Mesenchymal Stromal Cell Alginate Bandages Facilitate Use of Paracrine Molecules for Corneal Wound Healing.

Adipose-derived mesenchymal stromal cells (Ad-MSCs) may alleviate corneal injury through the secretion of therapeutic factors delivered at the injury site. We aimed to investigate the therapeutic factors secreted from hypothermically stored, alginate-encapsulated Ad-MSCs' bandages in in vitro and in vivo corneal wounds. Ad-MSCs were encapsulated in 1.2% w/v alginate gels to form bandages and stored at 15 °C for 72 h before assessing cell viability and co-culture with corneal scratch wounds. Genes of interest, including HGF, TSG-6, and IGF were identified by qPCR and a human cytokine array kit used to profile the therapeutic factors secreted. In vivo, bandages were applied to adult male mice corneas following epithelial debridement. Bandages were shown to maintain Ad-MSCs viability during storage and able to indirectly improve corneal wound healing in vivo. Soluble protein concentration and paracrine factors such as TSG-6, HGF, IL-8, and MCP-1 release were greatest following hypothermic storage. In vivo, Ad-MSCs bandages-treated groups reduced immune cell infiltration when compared to untreated groups. In conclusion, bandages were shown to maintain Ad-MSCs ability to produce a cocktail of key therapeutic factors following storage and that these soluble factors can improve in vitro and in vivo corneal wound healing.

Keratoconus at a Molecular Level: A Review.

Keratoconus is the most common ectatic disease of the cornea. The disease is usually detected between ages 15 and 25. Incidence is estimated at one out of every 2000 individuals, with some specific ethnic groups being more at risk. Keratoconus manifests itself as a progressive stromal thinning and deformation of the corneal tissue into a conical shape. The etiology of keratoconus is uncertain, although several studies have associated the disease to environmental factors, behavioral conditions and certain genetic disorders. In an effort to better understand how the corneal stroma becomes compromised, multiple experiments have been conducted over the last few years looking at the cells themselves and the factors they produce. The secretion pathways and levels of inflammatory molecules, growth factors, digestive enzymes, and apoptotic factors are all relevant to keratoconus. This review describes the current knowledge of keratoconic pathological signaling pathways within the cornea that may help future developments in disease prevention, treatment and modeling. Anat Rec, 2019. © 2019 Wiley Periodicals, Inc.

Encapsulation of human limbus-derived stromal/mesenchymal stem cells for biological preservation and transportation in extreme Indian conditions for clinical use.

Human limbus-derived stromal/mesenchymal stem cells (hLMSC) can be one of the alternatives for the treatment of corneal scars. However, reliable methods of storing and transporting hLMSC remains a serious translational bottleneck. This study aimed to address these limitations by encapsulating hLMSC in alginate beads. Encapsulated hLMSC were kept in transit in a temperature-conditioned container at room temperature (RT) or stored at 4 °C for 3-5 days, which is the likely duration for transporting cells from bench-to-bedside. Non-encapsulated cells were used as controls. Post-storage, hLMSC were released from encapsulation, and viability-assessed cells were plated. After 48 and 96-hours in culture the survival, gene-expression and phenotypic characteristics of hLMSC were assessed. During transit, the container maintained an average temperature of 18.6 ± 1.8 °C, while the average ambient temperature was 31.4 ± 1.2 °C (p = 0.001). Encapsulated hLMSC under transit at RT were recovered with a higher viability (82.5 ± 0.9% and 76.9 ± 1.9%) after 3 (p = 0.0008) and 5-day storage (p = 0.0104) respectively as compared to 4 °C (65.2 ± 1.2% and 64.5 ± 0.8% respectively). Cells at RT also showed a trend towards greater survival-rates when cultured (74.3 ± 2.9% and 67.7 ± 9.8%) than cells stored at 4 °C (54.8 ± 9.04% and 52.4 ± 8.1%) after 3 and 5-days storage (p > 0.2). Non-encapsulated cells had negligible viability at RT and 4 °C. Encapsulated hLMSC (RT and 4 °C) maintained their characteristic phenotype (ABCG2, Pax6, CD90, p63-α, CD45, CD73, CD105, Vimentin and Collagen III). The findings of this study suggest that alginate encapsulation is an effective method of hLMSC preservation offering high cell viability over prolonged durations in transit at RT, therefore, potentially expanding the scope of cell-based therapy for corneal blindness.

Assessment of corneal substrate biomechanics and its effect on epithelial stem cell maintenance and differentiation.

Whilst demonstrated extensively in vitro, the control of cell behaviour via modulation of substrate compliance in live tissues has not been accomplished to date. Here we propose that stem cells can be regulated solely through in situ modulation of tissue biomechanics. By first establishing, via high-resolution Brillouin spectro-microscopy, that the outer edge (limbus) of live human corneas has a substantially lower bulk modulus compared to their centre, we then demonstrate that this difference is associated with limbal epithelial stem cell (LESC) residence and YAP-dependent mechanotransduction. This phenotype-through-biomechanics correlation is further explored in vivo using a rabbit alkali burn model. Specifically, we show that treating the burnt surface of the cornea with collagenase effectively restores the tissue's mechanical properties and its capacity to support LESCs through mechanisms involving YAP suppression. Overall, these findings have extended implications for understanding stem cell niche biomechanics and its impact on tissue regeneration.

Mesenchymal stromal cells for ocular surface repair.

INTRODUCTION: Cornea is a transparent, robust tissue that comprises highly organized cells. Disruption of this specialized tissue can lead to scarring and subsequent blindness, making corneal damage a considerable challenge worldwide. At present, the available medical treatments are unable to address the wide range of corneal diseases. Mesenchymal stem cells (MSCs) have increasingly been investigated for their regenerative effect on ocular surface injury due to their unique ability for growth factor production, anti-inflammatory activity, immunomodulatory capacity and differentiation into multiple cell lineages. AREAS COVERED: Within this review, we explore the pathogenesis of corneal disorders in response to injury and disease, and the potential for MSCs to modulate this process as a treatment. Through the review of over 25 animal studies, we investigate the common mechanisms of action by which MSCs have their effect and discuss their potential for treating and/or preventing corneal deterioration EXPERT OPINION: Depending on the environmental cues, MSCs can exert a potent effect on corneal wound healing through reducing opacity and vascularization, whilst promoting re-epithelialization. Whilst their mechanism is multifactorial, it seems clear that the anti-inflammatory/immunomodulatory factors they produce in response to damage are key to their control of cellular milieu and improving healing outcomes.

YAP, ΔNp63, and ß-Catenin Signaling Pathways Are Involved in the Modulation of Corneal Epithelial Stem Cell Phenotype Induced by Substrate Stiffness.

Recent studies have established that the phenotype of epithelial stem cells residing in the corneal periphery (the limbus) depends on this niche's distinct biomechanical properties. However, the signaling pathways underlying this dependency are still poorly understood. To address this issue, we investigated the effect of substrate stiffness on the migration, proliferation, and molecular phenotype of human limbal epithelial stem cells (LESCs). Specifically, we demonstrated that cells grown on collagen-based substrates with limbus-like compliance showed higher proliferation and stratification and lower migration capabilities, as well as higher levels of pro-proliferative markers Ki67 and ß-Catenin, and LESC markers ΔNp63, ABCG2, and CK15. In contrast, cells on stiffer substrates lost these stem/progenitor cell markers, but instead expressed the key mechanotransduction factor YAP, as well as elevated levels of BMP4, a promotor of cell differentiation known to be negatively regulated by Wnt/ß-Catenin signaling. This data allowed us to propose a new model that integrates the various molecular pathways involved in LESC response to substrate stiffness. This model will potentially be a useful guide to future research on the mechanisms underlying LESC loss following fibrosis-causing injuries.

Autogenous Biofabrication of Nativelike, Scaffold-Free Human Skin Equivalents Using a Smart, Enzyme-Degradable Tissue Templating Coating.

In this study, we used tissue templating technology to direct human dermal fibroblasts to biofabricate large-area tissues that closely emulate the natural dermis. This technology also allowed the new tissues to promote their own release from the template surface, thus facilitating their recovery as self-sustained, scaffold-free dermal equivalents solely comprising human cells and their own extracellular matrix. The structure and composition of these dermal self-lifting autogenous tissue equivalents (SLATEs) were evaluated in detail and were shown to closely correlate to normal tissue function. Specifically, dermal SLATEs were shown to be composed of a dense collagen-based matrix interwoven with dermal-characteristic elastic fibers. In addition, the mechanical properties of these tissues (i.e., robustness, elastic modulus, and resistance to contraction and enzymatic degradation) were comparable to those of the natural human dermis. Furthermore, dermal SLATEs were capable of constituting tissues with a higher-order complexity by serving as a substrate to support the growth of keratinocytes into stratified epithelia with distinct layers of differentiation. This work thus illustrates the great potential of tissue templating technologies and how these can pave the way for the biofabrication of easily retrievable, scaffold-free human skin tissues with a structure, composition, and function suitable for both clinical and nonclinical applications.

Alginate encapsulated multipotent adult progenitor cells promote corneal stromal cell activation via release of soluble factors.

To reduce the increasing need for corneal transplantation, attempts are currently aiming to restore corneal clarity, one potent source of cells are multipotent adult progenitor cells (MAPC®). These cells release a powerful cocktail of paracrine factors that can guide wound healing and tissue regeneration. However, their role in corneal regeneration has been overlooked. Thus, we sought to explore the potential of combining the cytoprotective storage feature of alginate, with MAPC to generate a storable cell-laden gel for corneal wound healing. 72 hours following hypothermic storage, alginate encapsulation was shown to maintain MAPC viability at either 4 or 15°C. Encapsulated MAPC (2 x106 cells/mL) stored at 15°C presented the optimum temperature that allowed for cell recovery. These cells had the ability to reattach to tissue culture plastic whilst exhibiting normal phenotype and this was maintained in serum-free and xenobiotic-free medium. Furthermore, corneal stromal cells presented a significant decrease in scratch-wounds in the presence of alginate encapsulated MAPC compared to a no-cell control (p = 0.018). This study shows that immobilization of MAPC within an alginate hydrogel does not hinder their ability to affect a secondary cell population via soluble factors and that these effects are successfully retained following hypothermic storage.

3D bioprinting of a corneal stroma equivalent.

Corneal transplantation constitutes one of the leading treatments for severe cases of loss of corneal function. Due to its limitations, a concerted effort has been made by tissue engineers to produce functional, synthetic corneal prostheses as an alternative recourse. However, successful translation of these therapies into the clinic has not yet been accomplished. 3D bioprinting is an emerging technology that can be harnessed for the fabrication of biological tissue for clinical applications. We applied this to the area of corneal tissue engineering in order to fabricate corneal structures that resembled the structure of the native human corneal stroma using an existing 3D digital human corneal model and a suitable support structure. These were 3D bioprinted from an in-house collagen-based bio-ink containing encapsulated corneal keratocytes. Keratocytes exhibited high cell viability both at day 1 post-printing (>90%) and at day 7 (83%). We established 3D bio-printing to be a feasible method by which artificial corneal structures can be engineered.

Developing a Continuous Bioprocessing Approach to Stromal Cell Manufacture.

To this day, the concept of continuous bioprocessing has been applied mostly to the manufacture of molecular biologics such as proteins, growth factors, and secondary metabolites with biopharmaceutical uses. The present work now sets to explore the potential application of continuous bioprocess methods to source large numbers of human adherent cells with potential therapeutic value. To this purpose, we developed a smart multifunctional surface coating capable of controlling the attachment, proliferation, and subsequent self-detachment of human corneal stromal cells. This system allowed the maintenance of cell cultures under steady-state growth conditions, where self-detaching cells were continuously replenished by the proliferation of those remaining attached. This facilitated a closed, continuous bioprocessing platform with recovery of approximately 1% of the total adherent cells per hour, a yield rate that was maintained for 1 month. Moreover, both attached and self-detached cells were shown to retain their original phenotype. Together, these results represent the proof-of-concept for a new high-throughput, high-standard, and low-cost biomanufacturing strategy with multiple potentials and important downstream applications.

Preservation and stability of cell therapy products: recommendations from an expert workshop.

If the field of regenerative medicine is to deliver therapies, rapid expansion and delivery over considerable distances to large numbers of patients is needed. This will demand efficient stabilization and shipment of cell products. However, cryopreservation science is poorly understood by life-scientists in general and in recent decades only limited progress has been made in the technology of preservation and storage of cells. Rapid translation of new developments to a broader range of cell types will be vital, as will assuring a deeper knowledge of the fundamental cell biology relating to successful preservation and recovery of cell cultures. This report presents expert consensus on these and other issues which need to be addressed for more efficient delivery of cell therapies.

Controlling the 3D architecture of Self-Lifting Auto-generated Tissue Equivalents (SLATEs) for optimized corneal graft composition and stability.

Ideally, biomaterials designed to play specific physical and physiological roles in vivo should comprise components and microarchitectures analogous to those of the native tissues they intend to replace. For that, implantable biomaterials need to be carefully designed to have the correct structural and compositional properties, which consequently impart their bio-function. In this study, we showed that the control of such properties can be defined from the bottom-up, using smart surface templates to modulate the structure, composition, and bio-mechanics of human transplantable tissues. Using multi-functional peptide amphiphile-coated surfaces with different anisotropies, we were able to control the phenotype of corneal stromal cells and instruct them to fabricate self-lifting tissues that closely emulated the native stromal lamellae of the human cornea. The type and arrangement of the extracellular matrix comprising these corneal stromal Self-Lifting Analogous Tissue Equivalents (SLATEs) were then evaluated in detail, and was shown to correlate with tissue function. Specifically, SLATEs comprising aligned collagen fibrils were shown to be significantly thicker, denser, and more resistant to proteolytic degradation compared to SLATEs formed with randomly-oriented constituents. In addition, SLATEs were highly transparent while providing increased absorption to near-UV radiation. Importantly, corneal stromal SLATEs were capable of constituting tissues with a higher-order complexity, either by creating thicker tissues through stacking or by serving as substrate to support a fully-differentiated, stratified corneal epithelium. SLATEs were also deemed safe as implants in a rabbit corneal model, being capable of integrating with the surrounding host tissue without provoking inflammation, neo-vascularization, or any other signs of rejection after a 9-months follow-up. This work thus paves the way for the de novo bio-fabrication of easy-retrievable, scaffold-free human tissues with controlled structural, compositional, and functional properties to replace corneal, as well as other, tissues.