Experimental and Theoretical Exploration of the Kinetics and Thermodynamics of the Nucleophile-Induced Fragmentation of Ylidenenorbornadiene Carboxylates.

Ylidenenorbornadienes (YNDs), prepared by [4 + 2] cycloadditions between fulvenes and acetylene carboxylates, react with thiol nucleophiles to yield mixtures of four to eight diastereomers depending on the symmetry of the YND substrate. The mixtures of diastereomers fragment via a retro-[4 + 2] cycloaddition with a large variation in rate, with half-lives ranging from 16 to 11,000 min at 80 °C. The diastereomer-enriched samples of propane thiol adducts [YND-propanethiol (PTs)] were isolated and identified by nuclear Overhauser effect spectroscopy (NOESY) correlations. Simulated kinetics were used to extrapolate the rate constants of individual diastereomers from the observed rate data, and it correlated well with rate constants measured directly and from isolated diastereomer-enriched samples. The individual diastereomers of a model system fragment at differing rates with half-lives ranging from 5 to 44 min in CDCl3. Density functional theory calculations were performed to investigate the mechanism of fragmentation and support an asynchronous retro-[4 + 2] cycloaddition transition state. The computations generally correlated well with the observed free energies of activation for four diastereomers of the model system as a whole, within 2.6 kcal/mol. However, the observed order of the fragmentation rates across the set of diastereomers deviated from the computational results. YNDs display wide variability in the rate of fragmentation, dependent on the stereoelectronics of the ylidene substituents. A Hammett study showed that the electron-rich aromatic rings attached to the ylidene bridge increase the fragmentation rate, while electron-deficient systems slow fragmentation rates.

Ylidenenorbornadiene Carboxylates: Experimental Kinetic Analysis of a Nucleophile-Induced Fragmentation Reaction.

Ylidenenorbornadienes (YNDs), prepared by [4 + 2] cycloadditions between fulvenes and acetylene carboxylates, react with beta-mercaptoethanol to yield a mixture of four diastereomers. These four diastereomers fragment via a retro-[4 + 2] cycloaddition at differing rates. A simulated kinetics approach extrapolated the rate constants of the diastereomers from the observed rate data. YNDs display wide variability in rate of fragmentation, dependent on the stereoelectronics of the ylidene substituents. A substrate containing one carboxylic ester proved exceptionally stable to fragmentation.

Characterization of Reagent Pencils for Deposition of Reagents onto Paper-Based Microfluidic Devices.

Reagent pencils allow for solvent-free deposition of reagents onto paper-based microfluidic devices. The pencils are portable, easy to use, extend the shelf-life of reagents, and offer a platform for customizing diagnostic devices at the point of care. In this work, reagent pencils were characterized by measuring the wear resistance of pencil cores made from polyethylene glycols (PEGs) with different molecular weights and incorporating various concentrations of three different reagents using a standard pin abrasion test, as well as by measuring the efficiency of reagent delivery from the pencils to the test zones of paper-based microfluidic devices using absorption spectroscopy and digital image colorimetry. The molecular weight of the PEG, concentration of the reagent, and the molecular weight of the reagent were all found to have an inverse correlation with the wear of the pencil cores, but the amount of reagent delivered to the test zone of a device correlated most strongly with the concentration of the reagent in the pencil core. Up to 49% of the total reagent deposited on a device with a pencil was released into the test zone, compared to 58% for reagents deposited from a solution. The results suggest that reagent pencils can be prepared for a variety of reagents using PEGs with molecular weights in the range of 2000 to 6000 g/mol.

Reagent pencils: a new technique for solvent-free deposition of reagents onto paper-based microfluidic devices.

Custom-made pencils containing reagents dispersed in a solid matrix were developed to enable rapid and solvent-free deposition of reagents onto membrane-based fluidic devices. The technique is as simple as drawing with the reagent pencils on a device. When aqueous samples are added to the device, the reagents dissolve from the pencil matrix and become available to react with analytes in the sample. Colorimetric glucose assays conducted on devices prepared using reagent pencils had comparable accuracy and precision to assays conducted on conventional devices prepared with reagents deposited from solution. Most importantly, sensitive reagents, such as enzymes, are stable in the pencils under ambient conditions, and no significant decrease in the activity of the enzyme horseradish peroxidase stored in a pencil was observed after 63 days. Reagent pencils offer a new option for preparing and customizing diagnostic tests at the point of care without the need for specialized equipment.

Polymer brushes under high load.

Polymer coatings are frequently used to provide repulsive forces between surfaces in solution. After 25 years of design and study, a quantitative model to explain and predict repulsion under strong compression is still lacking. Here, we combine experiments, simulations, and theory to study polymer coatings under high loads and demonstrate a validated model for the repulsive forces, proposing that this universal behavior can be predicted from the polymer solution properties.

Synthesis and characterization of ionic polymer networks in a room-temperature ionic liquid.

Ionic liquid gels (ILGs) for potential use in ion transport and separation applications were generated via a free radical copolymerization of 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPS) and N,N'-methylene(bis)acrylamide (MBA) using 1-ethyl-3-methylimidazolium ethylsulfate (IL) as a room temperature ionic liquid solvent medium. The AMPS and MBA monomer solubility window in the IL in the temperature range of 25 to 65 °C was determined. In situ ATR-FTIR showed near complete conversion of monomers to a cross-linked polymer network. ILGs with glass transition temperatures (T(g)s) near -50 °C were generated with T(g) decreasing with increasing IL content. The elastic moduli in compression (200 to 6600 kPa) decreased with increasing IL content and increasing AMPS content while the conductivities (0.35 to 2.14 mS cm⁻¹) increased with increasing IL content and decreasing MBA content. The polymer-IL interaction parameter (χ) (0.48 to 0.55) was determined via a modified version of the Bray and Merrill equation.

Directing the deposition of ferromagnetic cobalt onto Pt-tipped CdSe@CdS nanorods: synthetic and mechanistic insights.

A methodology providing access to dumbbell-tipped, metal-semiconductor and metal oxide-semiconductor heterostructured nanorods has been developed. The synthesis and characterization of CdSe@CdS nanorods incorporating ferromagnetic cobalt nanoinclusions at both nanorod termini (i.e., dumbbell morphology) are presented. The key step in the synthesis of these heterostructured nanorods was the decoration of CdSe@CdS nanorods with platinum nanoparticle tips, which promoted the deposition of metallic CoNPs onto Pt-tipped CdSe@CdS nanorods. Cobalt nanoparticle tips were then selectively oxidized to afford CdSe@CdS nanorods with cobalt oxide domains at both termini. In the case of longer cobalt-tipped nanorods, heterostructured nanorods were observed to self-organize into complex dipolar assemblies, which formed as a consequence of magnetic associations of terminal CoNP tips. Colloidal polymerization of these cobalt-tipped nanorods afforded fused nanorod assemblies from the oxidation of cobalt nanoparticle tips at the ends of nanorods via the nanoscale Kirkendall effect. Wurtzite CdS nanorods survived both the deposition of metallic CoNP tips and conversion into cobalt oxide phases, as confirmed by both XRD and HRTEM analysis. A series of CdSe@CdS nanorods of four different lengths ranging from 40 to 174 nm and comparable diameters (6-7 nm) were prepared and modified with both cobalt and cobalt oxide tips. The total synthesis of these heterostructured nanorods required five steps from commercially available reagents. Key synthetic considerations are discussed, with particular emphasis on reporting isolated yields of all intermediates and products from scale up of intermediate precursors.

Controlling surface energy and wetability with Diels-Alder chemistry.

Reversible Diels-Alder chemistry was utilized to manipulate the surface energy of glass substrates. Hydrophobic dieneophiles were prepared and attached to glass slides and capillaries to yield a nonwetting surface. Thermal treatment of the surfaces cleaved the Diels-Alder linkage, and resulted in the fabrication of a hydrophilic surface. Preliminary analysis utilized contact angle (CA) measurements to monitor the change in surface energy, and observed a hydrophilic state (CA - 70 +/- 3 degrees) before attachment of the dieneophile to a hydrophobic state (CA - 101 +/- 9 degrees) followed by regeneration of the hydrophilic state (CA - 70 +/- 6 degrees) upon cleavage of the Diels-Alder linkage. The treatments were then applied to glass capillaries, with effective treatment confirmed by fluid column measurements. Patterned treatments were also demonstrated to provide effective flow gating. Finally, attempts to create self-pressurizing capillaries were unsuccessful due to pronounced contact angle hysteresis for the hydrophobic surface treatment.

Controlling dispersion and migration of particulate additives with block copolymers and Diels-Alder chemistry.

Reversible Diels-Alder chemistry was exploited to develop thermo-responsive polymer films. Here, low molecular weight poly(styrene) (PS) and poly(ethylene glycol) (PEG) were prepared with furyl and maleimido chain ends, respectively. These polymers were then tethered together to form a thiol-terminated PEG-b-PS diblock copolymer ligand via a Diels-Alder linkage and were employed to randomly disperse 10 nm diameter Au nanoparticles within a matrix of PEG. Thermal treatment caused the Diels-Alder linkages between the polymer blocks to be severed, resulting in controllable surface functionalization due to phase separation. Migration of the Au nanoparticles to the surface of the films was characterized by Rutherford backscattering spectroscopy, small-angle X-ray scattering, contact angle measurements, and atomic force microscopy.

Nanoparticle agglutination: acceleration of aggregation rates and broadening of the analyte concentration range using mixtures of various-sized nanoparticles.

SiO(2) particles of various sizes were prepared and surface modified with biotin-chain-end-functionalized poly(ethylene glycol). Dispersions of these particles were prepared, and their aggregation was induced upon the addition of avidin. The aggregate size and growth rate were monitored by DLS analysis, and SEM and TEM images of freeze-dried samples of the aggregate solutions were used to confirm the DLS data and to image the aggregate size and dimension. A linear correspondence between apparent diameter and time was observed, and both the 20 and 300 nm particles aggregated at slower rates than for the 40 nm particles. These observations were attributed to differences in the average functionality of the systems and the different initial concentrations of particles and avidin. The observed aggregation rates of binary combinations of the three particle sizes (i.e., 20 + 40 nm or 40 + 300 nm) were faster than those of the single-sized mixtures. These results were attributed to the faster flux of smaller particles toward larger particles in the mixture solutions as well as to the potentially larger number of productive collisions possible between mixtures of small particles and large particles versus only similarly sized particles. Combinations of the three sizes of particles were studied to find an empirical optimum formulation for generating large aggregates on a short time scale and over a wide range of analyte concentrations.

Biomolecule detection via target mediated nanoparticle aggregation and dielectrophoretic impedance measurement.

A new biosensing system is described that is based on the aggregation of nanoparticles by a target biological molecule and dielectrophoretic impedance measurement of these aggregates. The aggregation process was verified within a microchannel via fluorescence microscopy, demonstrating that this process can be used in a real time sensor application. Positive dielectrophoresis is employed to capture the nanoparticle aggregates at the edge of thin film electrodes, where their presence is detected either by optical imaging via fluorescence microscopy or by measuring the change in electrical impedance between adjacent electrodes. The electrical detection mechanism demonstrates the potential for this method as a micro total analysis system (microTAS).