RESUMEN
Several treatment-oriented classifications for the management of peri-implant marginal mucosal defects (PMMDs) have been published to date. While each classification provides valuable insights into key diagnostic and therapeutic aspects, there is a marked heterogeneity regarding the recommended clinical guidelines to achieve success in specific scenarios. The purpose of this review was to critically analyze and organize the similarities and differences enclosed in the available classifications linked with treatment recommendations on the management of PMMDs at single implant non-molar sites with the purpose of providing an overview of recommended interdisciplinary treatment options to facilitate clinical decision-making processes.
RESUMEN
This study aimed at characterizing the gingival thickness (GT) and determining correlations with other local phenotypical features. Cone-beam computed tomography scans from adult subjects involving the maxillary anterior teeth were obtained to assess buccal GT at different apico-coronal levels, periodontal supracrestal tissue height (STH), the distance from the cementoenamel junction to the alveolar bone crest (CEJ-BC), and bucco-lingual tooth dimensions in mm. A total of 100 subjects and 600 maxillary anterior teeth constituted the study sample. Variations in mean values of GT were observed as a function of apico-coronal level, tooth type, and gender. GT progressively increased apically. Maxillary central incisors and males generally exhibited thicker GT. Contrarily, females exhibited thinner GT and shorter STH. Tooth dimensions were negatively correlated with GT, as the narrower the tooth crown/root in the bucco-lingual dimension, the thicker the gingiva. GT at the level of the CEJ was dichotomized to differentiate between thin (<1mm) and thick (≥1mm) gingival phenotypes (GP). Teeth with a thin GP displayed greater CEJ-BC and buccolingual tooth width dimensions. Conversely, teeth with a thick GP generally exhibited taller STH and narrower tooth dimensions.
RESUMEN
OBJECTIVES: Digital protocols and bioactive materials may reduce complications and improve tooth autotransplantation (ATT) success and survival rates. This prospective study assesses the performance of a fully digital autotransplantation protocol of close-apex molars with the adjunctive application of Enamel Matrix Derivatives (EMD). METHODS: Twelve adult patients with 13 hopeless molar teeth were replaced with autotransplantation of closed apex third molars. Outcomes, including success and survival rates, clinical, endodontic, radiographic, patient-reported outcome measures (PROMs), and digital image assessments, were conducted over a two-year follow-up period. RESULTS: Survival and success rates were 100% and 91.2%, respectively, with no progressive inflammatory or replacement root resorption (ankylosis) except for one tooth presenting radiographic furcation involvement. A significant probing depth reduction of 2.4 ± 2.58 mm and CAL gains of 2.8 ± 3.03 mm were observed in transplanted teeth compared to the hopeless receptor teeth. Radiographic bone levels remained stable throughout the study period (-0.37 ± 0.66 mm), and digital image assessments showed minimal alveolar ridge width changes (-0.32 to -0.7 mm) and gingival margin changes (-0.95 to -1.27 mm) from baseline to last visit. PROMs indicated very high patient satisfaction. CONCLUSION: The use of a digital ATT protocol with adjunctive use of EMD in closed-apex third molars demonstrated promising short-term high success and survival rates. Additionally, this type of therapy adequately preserves the dimensions of the alveolar ridge in the receptor site. CLINICAL SIGNIFICANCE: This is the first prospective clinical study examining the effect of a digital tooth autotransplantation protocol combined with the application of EMD. It demonstrates that this approach is an effective treatment for replacing hopeless teeth and also validates the digital assessment of ATT alveolar ridge preservation at the recipient site.
Asunto(s)
Proteínas del Esmalte Dental , Trasplante Autólogo , Humanos , Estudios Prospectivos , Femenino , Adulto , Masculino , Persona de Mediana Edad , Proteínas del Esmalte Dental/uso terapéutico , Resultado del Tratamiento , Tercer Molar/trasplante , Tercer Molar/diagnóstico por imagen , Flujo de Trabajo , Adulto Joven , Tomografía Computarizada de Haz Cónico , Medición de Resultados Informados por el Paciente , Diente MolarRESUMEN
The components and dimensions of the periodontal and peri-implant phenotype have a high relevance in contemporary dental research and should be taken into consideration in the decision-making process in the management of a variety of clinical scenarios to optimize the outcomes of therapy. Various assessment methods for quantifying and classifying the phenotypical dimensions have emerged and developed in recent decades. Nevertheless, the use of cone-beam computed tomography (CBCT) scans remains the most commonly used approach worldwide. However, the accuracy to adequately imaging and measuring the dimensions of the hard and soft tissue components around teeth may represent a significant challenge in different clinical scenarios due to factors such as the age of the patient and motion during the scan, presence of metallic artifacts causing streaks and gray-value distortion, overlapping of soft tissue structures, machine performance, file processing, and small voxel size among others. These factors pose a particular challenge when tiny structures are under investigation, for example, the buccal/lingual bony or soft tissue layer of lower/upper incisors. Therefore, this review addresses the underlying technical information of the use of CBCT scans, and suggests some recommendations on the utilization of this method of assessment to optimally use it despite its' system-inherent limitations.
RESUMEN
The aim of this morphometric study was to precisely determine the 3D characteristics of the root complex of the posterior dentition. Extracted and well-preserved permanent posterior teeth were included in this analysis and grouped based on tooth type and arch location. All teeth were digitally scanned. Morphologic and dimensional features of the root complex were assessed, including length and surface area of the root trunk and individual roots, width of root concavities (RC), and furcation entrance, when present. A total of 240 posterior teeth comprised the study sample. The root complex of multirooted maxillary first premolars presented with a long root trunk (10.49 mm), representing 65.52% of the surface area, and two short roots comprising the remaining 34.8% of the surface area. Root trunks of mandibular molars were an average of 0.8 mm shorter than their maxillary counterparts. Class III furcation involvement is expected in all maxillary and mandibular molars, as well as multirooted maxillary first premolars, after 4.80 mm and 10.49 mm of clinical attachment loss, respectively. RCs were a common finding among the evaluated dentitions. The root complex morphology varies among the maxillary and mandibular posterior dentition. RCs are highly prevalent in both maxillary and mandibular dentition. The findings derived from this study can be utilized in daily clinical practice for the adequate management of posterior dentition and serve as a reference for future investigations in dental anatomy and digital technology. Also, these findings can guide the industry into creating and redefining tools that adequately adapt to the anatomical characteristics and variations of the specific tooth type.
Asunto(s)
Dentición Permanente , Raíz del Diente , Humanos , Raíz del Diente/anatomía & histología , Diente Premolar , Diente Molar , MaxilarRESUMEN
OBJECTIVES: The purpose of this prospective study was to determine the inter- and intraindividual variability in virtual single-tooth implant positioning based on the level of expertise, specialty, total time spent, and the use of a prosthetic tooth setup. MATERIALS AND METHODS: Virtual implant planning was performed on matched pre- and post-extraction intraoral scans (IOS), and cone-beam computed tomography scans of 15 patients. Twelve individual examiners, involving six novices and experts from oral surgery and prosthodontics positioned the implants, first based on anatomical landmarks utilizing only the post-extraction, and second with the use of the pre-extraction IOS as a setup. The time for implant positioning was recorded. After 1 month, all virtual plannings were performed again. The individual implant positions were superimposed to obtain 3D deviations using a software algorithm. RESULTS: An interindividual variability with mean angular, crestal, and apical positional deviations of 3.8 ± 1.94°, 1.11 ± 0.55, and 1.54 ± 0.66 mm, respectively, was found. When assessing intraindividual variability, deviations of 3.28 ± 1.99°, 0.78 ± 0.46, and 1.12 ± 0.61 mm, respectively, were observed. Implants planned by experts exhibited statistically lower deviations compared to those planned by novices. Longer planning times resulted in lower deviations in the experts' group but not in the novices. Oral surgeons demonstrated lower crestal, but not angular and apical deviations than prosthodontists. The use of a setup only led to minor adjustments. CONCLUSIONS: Substantial inter- and intraindividual variability exists during implant positioning utilizing specialized software planning. The level of expertise and the time invested influenced the deviations of the implant position during the planning sequence.
RESUMEN
PURPOSE: This in vitro study aimed to assess the positional accuracy during the sequence of static computer-assisted implant surgery (sCAIS) according to the anatomical characteristics of the alveolar ridge. MATERIAL AND METHODS: Maxillary bone models with six single tooth gaps including clinical scenarios of healed alveolar ridge (HR), single-rooted (SRS), and three-rooted socket (TRS) morphologies were used in this study. Positional deviations during implant placement procedures were evaluated after the pilot osteotomy (PD), final osteotomy (FD), and implant placement with respect to the pre-planned implant position by using a software package. ANOVA and post hoc analyses were performed. RESULTS: A total of 90 implants were included in this study. Higher mean angular, crestal, and apical deviations were found after the PD and FD (3.5 ± 2.4°, 0.7 ± 0.3 mm, and 1.4 ± 0.8 mm versus 3.6 ±2.2°, 0.6 ± 0.3 mm, and 1.2 ± 0.6 mm) compared to IP (2.8 ± 1.6°, 0.7 ± 0.3 mm, and 1.2 ± 0.5 mm, p ≤ 0.004). Implants placed in TRS demonstrated higher mean angular, crestal, and apical deviations (4.0 ± 1.7°, 0.8 ± 0.3 mm, and 1.6 ± 0.5 mm) compared to implants placed in SRS (2.5 ± 1.2°, 0.7 ± 0.3 mm, and 1.1 ± 0.4 mm) or HR (2.0 ± 0.9°, 0.5 ± 0.3 mm, and 0.8 ± 0.4 mm, p < 0.001). CONCLUSIONS: Positional deviations during sCAIS procedures are initiated with the first implant osteotomy and persist throughout the drilling sequence. However, deviations slightly decreased after implant placement. The alveolar ridge morphology is strongly associated with positional deviations. Higher deviations were observed in three-rooted and single-rooted sockets simulating an immediate approach compared to healed sites simulating a delayed protocol.
RESUMEN
The aim of this PRISMA-compliant systematic review was to analyze the evidence pertaining to disease resolution after treatment of peri-implant diseases (PROSPERO: CRD42022306999) with the following PICO question: what is the rate of disease resolution following non-surgical and surgical therapy for peri-implant diseases in adult human subjects? A literature search to identify studies that fulfilled a pre-established eligibility criteria was conducted. Data on primary therapeutic outcomes, including treatment success, rate of disease resolution and/or recurrence, as well as a variety of secondary outcomes was extracted and categorized. Fifty-five articles were included. Few studies investigated the efficacy of different non-surgical and surgical therapies to treat peri-implant diseases using a set of pre-defined criteria and with follow-up periods of at least one year. The definition of treatment success and outcomes of disease resolution differed considerably among the included studies. Treatment of peri-implant mucositis was most commonly reported to be successful in arresting disease progression for ≤60% of the cases, whereas most studies on peri-implantitis treatment reported disease resolution occurring in <50% of the fixtures. In conclusion, disease resolution is generally unpredictable and infrequently achieved after the treatment of peri-implant diseases. A great variety of definitions have been used to define treatment success. Notably, percentages of treatment success and disease resolution were generally underreported. The use of standardized parameters to evaluate disease resolution should be considered an integral component in future clinical studies.
RESUMEN
This study aimed at determining the correlation between gingival stippling (GS) and other phenotypical characteristics. Adult subjects in need of cone-beam computed tomography scans (CBCT) and comprehensive dental treatment in the maxillary anterior region were recruited. Facial gingival thickness [GT] and buccal bone thickness [BT] were assessed utilizing CBCT. Standardized intraoral photographs were obtained to determine keratinized tissue width (KTW), presence of GS in all facial and interproximal areas between the maxillary canines, and other variables of interest, such as gingival architecture (GA), tooth shape, and location. Statistical analyses to assess different correlations among recorded variables were conducted. A total of 100 participants and 600 maxillary anterior teeth constituted the study population and sample, respectively. Facial GS was observed in 56% of males and 44% of females, and it was more frequently associated with flat GA, triangular and square/tapered teeth, central incisors, and males. Greater mean values of GT, BT, and KTW were observed in facial areas that exhibited GS. Interdental GS was present in 73% of the sites and it was more frequently observed in males, the central incisor region, and when facial GS was present. Multilevel logistic regression revealed a statistically significant association between the presence of GS and KTW, BT measured at 3mm apical to the bone crest, and tooth type. This information can be used in the recognition of common periodontal phenotypical patterns associated with specific features of great clinical significance.
RESUMEN
AIM: To determine the structural and gene expression features of different intra-oral soft tissue donor sites (i.e., anterior palate, posterior palate, maxillary tuberosity and retromolar pad). MATERIALS AND METHODS: Standardized mucosal tissue punch biopsies were collected from at least one donor site per subject. Histological processing was performed to determine tissue morphometry and quantify collagen composition. Site-specific gene distribution was mapped using targeted gene expression analysis and validated using real time polymerase chain reaction (qPCR). RESULTS: A total of 50 samples from 37 subjects were harvested. Epithelial thickness did not differ between sites. However, lamina propria was thicker in the maxillary tuberosity (2.55 ± 0.92 mm) and retromolar pad (1.98 ± 0.71 mm) than in the lateral palate. Type I collagen was the predominant structural protein in the lamina propria (75.06%-80.21%). Genes involving collagen maturation and extracellular matrix regulation were highly expressed in the maxillary tuberosity and retromolar pad, while lipogenesis-associated genes were markedly expressed in the lateral palate. The retromolar pad showed the most distinct gene expression profile, and the anterior and posterior palate displayed similar transcription profiles. CONCLUSIONS: Tissue samples harvested from the anterior and posterior palate differed morphologically from those from the maxillary tuberosity and retromolar pad. Each intra-oral site showed a unique gene expression profile, which might impact their biological behaviour and outcomes of soft tissue augmentation procedures.
Asunto(s)
Tejido Conectivo , Hueso Paladar , Humanos , Tejido Conectivo/trasplante , Hueso Paladar/anatomía & histología , Colágeno , Membrana Mucosa , Perfilación de la Expresión GénicaRESUMEN
The primary aim of this study was to evaluate the efficacy of alveolar ridge preservation (ARP) therapy compared with unassisted socket healing (USH) in attenuating interproximal soft tissue atrophy. Adult subjects that underwent maxillary single-tooth extraction with or without ARP therapy were included in this study. Surface scans and cone beam computed tomography were obtained to digitally assess interproximal soft tissue height changes and measure facial bone thickness (FBT), respectively. Logistic regression models were conducted to investigate the individual effect of demographic and clinical variables. Ninety-six subjects (USH=49; ARP=47) constituted the study population. Linear soft tissue assessments revealed a significant reduction of the interproximal soft tissue over time within and between groups (P<.0001). ARP therapy significantly attenuated interproximal soft tissue height reduction compared to USH (USH mesial: -2.0±0.9mm vs. ARP mesial: -1.0±0.5mm / USH distal -1.9±0.7mm vs. ARP distal: -1.1±0.5mm; P<.0001). Thin FBT (≤1mm) upon extraction was associated with greater interproximal soft tissue atrophy compared with thick FBT (>1mm), independently of the treatment received (P<.0001). Nevertheless, ARP therapy resulted in better preservation of interproximal soft tissue height especially in thin bone phenotype by a factor of 2 for the mesial site (+1.3mm) and a factor of 1.6 (+0.9mm) for the distal site. This study demonstrated that ARP therapy largely attenuates interproximal soft tissue dimensional reduction after maxillary single-tooth extraction compared with USH.
RESUMEN
OBJECTIVES: The primary aim of this in vitro study was to assess the effect of alveolar residual bone height in the posterior maxilla on the accuracy of the final implant position via free-handed and static Computer-Assisted Implant Placement (sCAIP). The secondary aim was to evaluate the influence of the maxillary sinus morphology on the accuracy of final implant position. MATERIALS AND METHODS: Partially edentulous standardized maxillary models simulating three different residual bone heights and different sinus floor morphologies were investigated. One-hundred eighty equally distributed implants, which were placed either free-handed or sCAIP, constituted the study sample. 3D digital deviations were obtained by superimposing the post-surgical scans on the initial treatment plan. RESULTS: Angular and linear deviation assessment demonstrated higher implant position accuracy in the sCAIP group. sCAIP revealed similar outcomes independently of the alveolar bone height and sinus floor morphology. Contrarily, in the free-handed group, alveolar bone height and sinus morphology statistically affected the final implant position. Non-parametric three-way ANOVA showed significance for implant placement protocol (p < .0001) and alveolar bone height (p ≤ .02) when angular, and linear deviations were evaluated. Sinus morphology was statistically significantly associated with angular deviation (p = .0009). CONCLUSIONS: sCAIP demonstrated higher 3D implant position accuracy. Alveolar bone height (strongly) and sinus morphology are associated with the accuracy of final implant position when the free-handed implant protocol is followed. However, these anatomical factors did not affect final implant position during sCAIP.
RESUMEN
BACKGROUND: This study aimed to evaluate the reliability and reproducibility of different non-invasive methods for the assessment of peri-implant mucosal thickness. METHODS: Subjects with two adjacent dental implants in the central maxillary region were included in this study. Three different methods to assess facial mucosal thickness (FMT) were compared: digital file superimposition using Digital Imaging and Communication in Medicine (DICOM) and stereolithography (STL) files of the arch of interest (DICOM-STL), DICOM files alone, and non-ionizing ultrasound (US). Inter-rater reliability agreements between different assessment methods were analyzed using inter-class correlation coefficients (ICCs). RESULTS: A total of 50 subjects with 100 bone-level implants constituted the study population. Assessment of FMT using STL and DICOM files demonstrated excellent inter-rater reliability agreement. Mean ICC values of 0.97 and 0.95 were observed in the DICOM-STL and DICOM groups, respectively. Comparison between the DICOM-STL and US revealed good agreement, with an ICC of 0.82 (95% CI: 0.74 to 0.88) and a mean difference of -0.13 ± 0.50 mm (-1.13 to 0.86). Comparison between DICOM files alone versus US showed good agreement, with an ICC of 0.81 (95% CI: 0.73 to 0.89) and a mean difference of -0.23 ± 0.46 mm (-1.12 to 0.67). Comparison between DICOM-STL and DICOM files revealed excellent agreement, with an ICC of 0.94 (95% CI: 0.91 to 0.96) and a mean difference of 0.1 ± 0.29 mm (LOA -0.47 to 0.46). CONCLUSIONS: Quantification of peri-implant mucosal thickness via analysis of DICOM-STL files, DICOM files, or US assessment are comparably reliable and reproducible methods.
Asunto(s)
Implantes Dentales , Maxilar , Humanos , Estudios Transversales , Reproducibilidad de los Resultados , Maxilar/diagnóstico por imagen , Tomografía Computarizada de Haz CónicoRESUMEN
PURPOSE: The purpose of this in vitro study was to compare the volumetric loss of clinical crown structure for commonly encountered clinical situations for monolithic ceramic crowns, occlusal overlays, and partial coverage onlays. MATERIALS AND METHODS: Typodont teeth made with pre-existing mesio-occluso-distal (MOD) preparations for mandibular first molars and maxillary first premolars were prepared with three different preparations: a full contour monolithic zirconia crown, a lithium disilicate occlusal overlay, and mesio-occluso-disto-buccal/mesio-occluso-disto-lingual (MODB/MODL) lithium disilicate onlays for premolars/molars. 3D metrological software was used to evaluate the volumetric loss of clinical crown structure for each preparation type. Subsequently, the mesiolingual cusps of mandibular molars and buccal cusps of maxillary premolars were excluded for a separate analysis, to simulate patient presentation with an existing restoration and sheared off cusp. RESULTS: Full coverage monolithic zirconia crowns removed 45.37 - 219.53 mm3 of remaining clinical tooth structure, depending on the clinical scenario and tooth position, while lithium disilicate overlays removed 27.48 - 105.13 mm3. MODB/MODL lithium disilicate onlays removed 5.48 - 47.45 mm3 . In each scenario tested, MODB/MODL onlays removed significantly less clinical crown structure than overlays (P<0.001); both MODB/MODL onlays and overlays removed significantly less structure than full coverage crowns (P<0.001). CONCLUSION: Monolithic zirconia crown restorations require significantly more removal of remaining tooth structure than lithium disilicate occlusal overlays and partial coverage onlays for commonly occurring clinical situations requiring indirect restorations. Int J Prosthodont 2023. doi: 10.11607/ijp.8011.
RESUMEN
Healing after tooth extraction involves a series of reparative processes affecting both alveolar bone and soft tissues. The aim of the present study was to investigate whether activation of molecular signals during the healing process confers a regenerative advantage to the extraction socket soft tissue (ESsT) at 8 weeks of healing. Compared to subepithelial connective tissue graft (CTG), qRT-PCR analyses revealed a dramatic enrichment of the ESsT in osteogenic differentiation markers. However, ESsT and CTG shared characteristics of nonspecialized soft connective tissue by expressing comparable levels of genes encoding abundant extracellular matrix (ECM) proteins. Genes encoding the transforming growth factor-ß1 (TGF-ß1) and its receptors were strongly enriched in the CTG, whereas the transcript for the insulin-like growth factor-1 (IGF-1) showed significantly high and comparable expression in both tissues. Mechanical stimulation, by the means of cyclic strain or matrix stiffness applied to primary ESsT cells (ESsT-C) and CTG fibroblasts (CTG-F) extracted from the tissue samples, revealed that stress-induced TGF-ß1 not exceeding 2.3 ng/mL, as measured by ELISA, in combination with IGF-1 up to 2.5 ng/mL was able to induce the osteogenic potential of ESsT-Cs. However, stiff matrices (50 kPa), upregulating the TGF-ß1 expression up to 6.6 ng/mL, caused downregulation of osteogenic gene expression in the ESsT-Cs. In CTG-Fs, endogenous or stress-induced TGF-ß1 ≥ 4.6 ng/mL was likely responsible for the complete lack of osteogenesis. Treatment of ESsT-Cs with TGF-ß1 and IGF-1 proved that, at specific concentrations, the two growth factors exhibited either an inductive-synergistic or a suppressive activity, thus determining the osteogenic and mineralization potential of ESsT-Cs. Taken together, our data strongly warrant the clinical exploration of ESsT as a graft in augmentative procedures during dental implant placement surgeries.
Asunto(s)
Alveolo Dental , Factor de Crecimiento Transformador beta1 , Humanos , Factor I del Crecimiento Similar a la Insulina/genética , Factor I del Crecimiento Similar a la Insulina/farmacología , Osteogénesis , Regeneración Ósea , Proteínas de la Matriz ExtracelularRESUMEN
AIM: This randomized controlled trial evaluated the impact of a partially exposed non-absorbable membrane (dPTFE) in Alveolar Ridge Preservation (ARP) procedures on clinical, tomographic, immunoenzymatic, implant-related, and patient-centered outcomes. MATERIALS AND METHODS: Patients with a hopeless maxillary single-rooted tooth demanding rehabilitation with implants were included. Patients were randomized into two groups: dPTFE (n = 22)-tooth extraction followed by ARP using a partially exposed dPTFE membrane; USH (n = 22)-unassisted socket healing. Clinical and tomographic analyses were performed at baseline and after 3 months. After 3 months, patients received one dental implant. Implant stability quotient was obtained following implant placement. Bone-related markers were analyzed in bone biopsies using an immunoenzymatic assay. RESULTS: Greater gain in Keratinized Mucosa Width (KMW) was observed in the dPTFE (1.33 ± 0.98 mm) compared to USH (0.59 ± 0.98 mm) (Mann-Whitney test, Z = 2,28, p < 0.05). USH showed a reduction of pain/discomfort, edema, and interference with daily life from the seventh day (Friedman/Wilcoxon test, maxT = 7.48, 8.00, and 5.92, respectively, p < 0.05). dPTFE presents a reduction of edema and interference with daily life from the 7th day and pain/discomfort from the 14th day (Friedman/Wilcoxon test, maxT = 5.40, 5.26, and 4.78, respectively, p < 0.05). The dPTFE group presented higher pain/discomfort in the 35 and 42 days and higher edema from 7 to 42 days postoperatively than USH group (Mann-Whitney test, p < 0.05). No differences between groups were observed in the tomographic measures, immunoenzymatic analysis, and implant stability (p > 0.05). CONCLUSION: dPTFE was superior to USH by increasing KMW gain. However, dPTFE without bone graft presented similar bone loss compared to USH. This clinical trial was not registered prior to participant recruitment and randomization (NCT04329351).
Asunto(s)
Pérdida de Hueso Alveolar , Aumento de la Cresta Alveolar , Humanos , Proceso Alveolar/diagnóstico por imagen , Proceso Alveolar/cirugía , Alveolo Dental/cirugía , Aumento de la Cresta Alveolar/métodos , Extracción Dental/métodos , Atención Odontológica , Pérdida de Hueso Alveolar/cirugíaRESUMEN
BACKGROUND: The purpose of this study was to determine the association between periodontal supracrestal soft tissue dimensions (PSSTDs) and other phenotypic features in non-molar maxillary teeth. MATERIALS AND METHODS: Adult subjects in need of comprehensive dental treatment were recruited. Periodontal phenotypic variables (i.e., facial and palatal gingival thickness [GT], alveolar bone thickness [BT], and PSSTDs, namely distance from the gingival margin to the bone crest defined as periodontal supracrestal tissue height [PSTH] and distance from the cementoenamel junction to the bone crest [CEJ-BC]) were recorded using cone-beam computed tomography scans. Standardized intraoral photographs were obtained to assess facial keratinized tissue width (KTW) and other anatomical parameters (i.e., tooth type, gingival architecture, and interproximal papilla height). RESULTS: The study sample was constituted of 87 participants that contributed with a total of 522 maxillary anterior teeth. Differences in mean values of PSSTDs, KTW, GT, and BT were observed between tooth types and sex. Males exhibited a thicker GT and BT, and taller PSTH and KTW compared to females. Shorter CEJ-BC was associated with shorter PSTH, wider KTW, and thicker GT and BT. Shorter PSTH was associated with thicker facial BT. Notably, BT and GT were positively correlated at both facial and palatal sites, meaning that the thicker the gingival phenotype, the thicker the bone morphotype. Facial BT and facial GT were positively correlated with KTW. A flat gingival architecture was associated with the thick periodontal phenotype. Square teeth had shorter CEJ-BC, wider KTW, and thicker GT. CONCLUSIONS: Periodontal phenotypic features vary across and within subjects, between facial and palatal sites at different apico-coronal levels, and as a function of sex and tooth type. The shorter the PSSTDs, the wider the KTW and the thicker the GT and BT. PSSTDs, particularly PSTH, should be considered an integral component of the periodontal phenotype.
Asunto(s)
Encía , Maxilar , Masculino , Femenino , Animales , Estudios Transversales , Maxilar/diagnóstico por imagen , Encía/diagnóstico por imagen , Tomografía Computarizada de Haz Cónico/métodos , FenotipoRESUMEN
PURPOSE: This in vitro study aimed at comparing the accuracy of freehand implant placement with static computer-assisted implant surgery (sCAIS), utilizing a keyless and a drill-key implant system and two guide-hole designs. METHODS: A total of 108 implants were placed in 18 partially edentulous maxillary models simulating two different alveolar ridge morphologies. 3D digital deviations between pre-planned and post-operative implant positions were obtained. Guide material reduction was assessed in the keyless implant system for the manufacturer's sleeve and sleeveless guide-hole designs. RESULTS: sCAIS using a sleeveless guide-hole design demonstrated smaller mean angular, crestal and apical deviations compared to sCAIS utilizing a manufacturer's sleeve and the freehand group (2.6 ± 1.6°, vs 3.3 ± 1.9°, vs 4.0 ± 1.9°; 0.5 ± 0.3 mm, vs 0.6 ± 0.3 mm, vs 0.8 ± 0.3 mm; and 1.0 ± 0.5 mm, vs 1.2 ± 0.7 mm, vs 1.5 ± 0.6 mm). Smaller angular and apical mean deviations were observed in the keyless implant system as compared with the drill-key implant system (3.1 ± 1.7°, vs 3.5 ± 1.9°, p = 0.03; and 1.2 ± 0.6 mm, vs 1.4 ± 0.7 mm, p = 0.045). Overall, smaller angular, crestal, and apical deviations (p < 0.0001) were observed in healed alveolar ridges (2.4 ± 1.7°, 0.5 ± 0.3 mm, and 0.9 ± 0.5 mm) than in extraction sockets (4.2 ± 1.6°, 0.8 ± 0.3 mm, and 1.6 ± 0.5 mm). Higher mean volumetric material reduction was observed in sleeveless than in manufacturer's sleeve guide-holes (- 0.10 ± 0.15 mm3, vs - 0.03 ± 0.03 mm3, p = 0.006). CONCLUSIONS: Higher final implant positional accuracy was observed in sCAIS for the keyless implant system, with a sleeveless guide-hole design, and in healed ridges. Sleeveless guide holes resulted in higher volumetric material reduction compared with the manufacturer's sleeve.
Asunto(s)
Implantes Dentales , Boca Edéntula , Cirugía Asistida por Computador , Humanos , Implantación Dental Endoósea/métodos , Cirugía Asistida por Computador/métodos , ComputadoresRESUMEN
AIM: This study was primarily aimed at assessing the effect that specific periodontal phenotypical characteristics have on alveolar ridge remodelling after tooth extraction. MATERIALS AND METHODS: Patients in need of extraction of a non-molar maxillary tooth were enrolled. Baseline phenotypical characteristics (i.e., mid-facial and mid-palatal soft tissue and bone thickness, and supracrestal soft tissue height [STH]) were recorded upon extraction. A set of clinical, digital imaging (linear and volumetric), and patient-reported outcomes were assessed over a 14-week healing period. RESULTS: A total of 78 subjects were screened. Forty-two subjects completed the study. Linear and volumetric bone changes, as well as vertical linear soft tissue and alveolar ridge volume (soft tissue contour) variations, were indicative of a marked dimensional reduction of the alveolar ridge over time. Horizontal facial and palatal soft tissue thickness gain was observed. Thin facial bone (≤1 mm) upon extraction, compared with thick facial bone (>1 mm), was associated with greater linear horizontal (-4.57 ± 2.31 mm vs. -2.17 ± 1.65 mm, p = .003) and vertical mid-facial (-0.95 ± 0.67 mm vs. -4.08 ± 3.52 mm, p < 0.001) and mid-palatal (-2.03 ± 2.08 mm vs. -1.12 ± 0.99 mm, p = 0.027) bone loss, as well as greater total (-34% ± 10% vs. 15% ± 6%, p < 0.001), facial (-51% ± 19% vs. 28% ± 18%, p = 0.040), and palatal bone volume reduction (-26% ± 14% vs. -8% ± 10%, p < 0.001). Aside from alveolar bone thickness, STH was also found to be a predictor of alveolar ridge resorption since this variable was directly correlated with bone volume reduction. Patient-reported discomfort scores progressively decreased over time, and the mean satisfaction upon study completion was 94.5 ± 0.83 out of 100. CONCLUSIONS: Alveolar ridge remodelling is a physiological phenomenon that occurs after tooth extraction. Post-extraction alveolar ridge atrophy is more marked on the facio-coronal aspect. These dimensional changes are more pronounced in sites exhibiting a thin facial bone phenotype (Clinicaltrials.gov NCT02668289).
Asunto(s)
Pérdida de Hueso Alveolar , Aumento de la Cresta Alveolar , Humanos , Alveolo Dental/cirugía , Proceso Alveolar/diagnóstico por imagen , Proceso Alveolar/cirugía , Pérdida de Hueso Alveolar/diagnóstico por imagen , Pérdida de Hueso Alveolar/etiología , Atención Odontológica , Extracción Dental , Fenotipo , Aumento de la Cresta Alveolar/métodosRESUMEN
OBJECTIVES: The primary aim of this in vitro study was to evaluate the influence of alveolar ridge morphologies on the accuracy of static Computer-Assisted Implant Surgery (sCAIS). The secondary aims were to evaluate the influence of guide-hole design and implant macro-design on the accuracy of the final implant position. METHODS: Eighteen standardized partially edentulous maxillary models with two different types of alveolar ridge morphologies were used. Each model was scanned via cone beam computer tomography prior to implant placement and scanned with a laboratory scanner prior to and following implant placement using sCAIS. The postsurgical scans were superimposed on the initial treatment planning position to measure the deviations between planned and postsurgical implant positions. RESULTS: Seventy-two implants were equally distributed to the study groups. Implants placed in healed alveolar ridges showed significantly lower mean deviations at the crest (0.36 ± 0.17 mm), apex (0.69 ± 0.36 mm), and angular deviation (1.86 ± 0.99°), compared to implants placed in fresh extraction sites (0.80 ± 0.29 mm, 1.61 ± 0.59 mm, and 4.33 ± 1.87°; all p<0.0001). Implants placed with a sleeveless guide-hole design demonstrated significantly lower apical (1.02 ± 0.66 mm) and angular (2.72 ± 1.93°) deviations compared to those placed with manufacturer's sleeves (1.27 ± 0.67 mm; p = 0.01, and 3.46 ± 1.9°; p = 0.02). Deep-threaded tapered bone level implants exhibited significantly lower deviations at the crest (0.49 ± 0.28 mm), apex (0.97 ± 0.63 mm), and angular deviations (2.63 ± 1.85°) compared to shallow-threaded parallel-walled bone level implants (0.67 ± 0.34 mm; p = 0.0005, 1.32 ± 0.67 mm; p = 0.003, and 3.56 ± 1.93°; p = 0.01). CONCLUSIONS: The accuracy of the final implant position with sCAIS is determined by the morphology of the alveolar ridge, the design of the guide holes, and the macrodesign of the implant. CLINICAL SIGNIFICANCE: Higher accuracy in the final implant position was observed with implants placed in healed alveolar ridge morphologies, in implants with deep-threaded tapered macro-design, and when sleeveless surgical guide holes were used.