Nanodots functionalized with chitooligosaccharides for blocking chitoporins.

We report the synthesis of functionalized nanodots as potential powerful blockers of solute transport through a chitoporin. Ultrasmall silica nanocapsules with a diameter of ∼ 6 nm were coated with chitooligosaccharides to be used as a "lid" binding to the opening of the chitoporin VhChiP of Vibrio campbellii. Efficient blocking is attributed to the adequate size of the nanodots and their functionalization with oligochitosan, which has strong affinity towards the Vibrio chitoporin. This strategy paves the way towards the development of nanomaterials for blocking other porins.

In situ characterization techniques of protein corona around nanomaterials.

Nanoparticles (NPs) inevitably interact with proteins upon exposure to biological fluids, leading to the formation of an adsorption layer known as the "protein corona". This corona imparts NPs with a new biological identity, directly influencing their interactions with living systems and dictating their fates in vivo. Thus, gaining a comprehensive understanding of the dynamic interplay between NPs and proteins in biological fluids is crucial for predicting therapeutic effects and advancing the clinical translation of nanomedicines. Numerous methods have been established to decode the protein corona fingerprints. However, these methods primarily rely on prior isolation of NP-protein complex from the surrounding medium by centrifugation, resulting in the loss of outer-layer proteins that directly interact with the biological system and determine the in vivo fate of NPs. We discuss here separation techniques as well as in situ characterization methods tailored for comprehensively unraveling the inherent complexities of NP-protein interactions, highlighting the challenges of in situ protein corona characterization and its significance for nanomedicine development and clinical translation.

Alloying One-Dimensional Coordination Polymers To Create Ductile Materials.

The preparation of coordination polymer (CP) alloys is demonstrated by the use of two meltable, one-dimensional crystal structures via melt-kneading. The polymer structures of the alloys are studied by synchrotron X-ray absorption and scattering, solid-state NMR spectroscopy, DSC, and viscoelastic measurements. Crystalline and amorphous domains and thermal properties (melting and glass transition) in the alloys depend on the ratio of the two constituent CPs. The glassy alloy composed of an equivalent amount of two CPs shows high plastic deformation properties, and the fracture point reaches 128% without a filler or compatibilizing agent, hence behaving as ductile materials.

In Situ Measurement of Nanoparticle-Blood Protein Adsorption and Its Heterogeneity with Single-Nanoparticle Resolution via Dual Fluorescence Quantification.

The formation of a protein corona gives nanomedicines a distinct biological identity, profoundly influencing their fate in the body. Nonspecific nanoparticle-protein interactions are typically highly heterogeneous, which can lead to unique biological behaviors and in vivo fates for individual nanoparticles that remain underexplored. To address this, we have established an in situ approach that allows quantitative examination of nanoparticle-protein adsorption at the individual nanoparticle level. This method integrates dual fluorescence quantification techniques, wherein the nanoparticles are first individually analyzed via nanoflow cytometry to detect fluorescent signals from adsorbed proteins. The obtained fluorescence intensity is then translated into protein quantities through calibration with microplate reader quantification. Consequently, this approach enables analysis of interparticle heterogeneity of nano-protein interactions, as well as in situ monitoring of protein adsorption kinetics and nanoparticle aggregation status in blood serum, preconditioning for a comprehensive understanding of nano-bio interactions, and predicting in vivo fate of nanomedicines.

Self-healing, antibiofouling and anticorrosion properties enabled by designing polymers with dynamic covalent bonds and responsive linkages.

Coating metal structures with a protective material is a popular strategy to prevent their deterioration due to corrosion. However, maintaining the barrier properties of coatings after their mechanical damage is challenging. Herein, we prepared multifunctional coatings with self-healing ability to conserve their anticorrosion performance after damage. The coating was formed by blending synthesized redox-responsive copolymers with the ability to release a corrosion inhibitor upon the onset of corrosion with synthesized self-healing polyurethanes containing disulfide bonds. The corrosion rate of steel substrates coated with a blend is approximately 24 times lower than that of steel coated with only self-healing polyurethane. An exceptional healing efficiency, as high as 95%, is obtained after mechanical damage. The antibiofouling property against bacterial and microalgal attachments on coatings is facilitated by the repellent characteristic of fluorinated segments and the biocidal activity of the inhibitor moieties in the copolymer.

Release and Transport of Nanomaterials from Hydrogels Controlled by Temperature.

Understanding the transport of nanoparticles from and within hydrogels is a key issue for the design of nanocomposite hydrogels for drug delivery systems and tissue engineering. To investigate the translocation of nanocarriers from and within hydrogel networks triggered by changes of temperature, ultrasmall (8 nm) and small (80 nm) silica nanocapsules are embedded in temperature-responsive hydrogels and non-responsive hydrogels. The ultrasmall silica nanocapsules are released from temperature-responsive hydrogels to water or transported to other hydrogels upon direct activation by heating or indirect activation by Joule heating; while, they are not released from non-responsive hydrogel. Programmable transport of nanocarriers from and in hydrogels provides insights for the development of complex biomedical devices and soft robotics.

Immobilized chitinase as effective biocatalytic platform for producing bioactive di-N-acetyl chitobiose from recycled chitin food waste.

Described is chitinase immobilization on magnetic nanoparticles (MNPs) as biocompatible support for enzymatic production of di-N-acetyl chitobiose from chitin waste. Chitinase immobilization was feasible with an immobilization yield of 88.9 ± 1.6 % with 97.8 ± 1.0 % retention of activity and compared to free enzyme work, immobilization conferred better thermal and storage stability. As practical benefit the attachment to magnetic nanocarriers enabled easy enzyme recovery after repeated application runs and thus sustainable reuse. In fixed state chitinase retained a remarkable 39.7 ± 2.6 % of the starting activity after 16 reaction cycles. Furthermore, immobilized chitinase showed higher catalytic activity than free chitinase in converting shrimp shells and squid-pens chitins into di-N-acetyl chitobiose in a single-step reaction. The final yield of purified compound was 37.0 ± 1.2 % from shrimp shells and 61.1 ± 0.5 % from squid-pens chitin. In conclusion, an efficient MNP-based chitinase immobilization system with the potential for large-scale production was developed.

Nanofibers as precursors for the rapid formation of hydrogels.

Hydrogels can be used in surgeries, which require a support material to maintain the correct anatomy. One major limitation is however the time required for the preparation of hydrogels under urgent conditions. Herein, we report a new method for a very fast preparation of hydrogels at room temperature. Nanofibers of dextran containing vinyl groups produced by electrospinning are loaded with redox- or photo-initiators for radical polymerization. Once dissolved in water, the nanofibers yield hydrogels either spontaneously or upon irradiation with UV light. We also show that the nanofibers can be loaded with active fillers so that hydrogels embedding nanocapsules are obtained. This concept could be applied for the rapid preparation of functional hydrogels which are needed as implants.

Functional Fiber Membranes with Antibacterial Properties for Face Masks.

Reusable face masks are an important alternative for minimizing costs of disposable and surgical face masks during pandemics. Often complementary to washing, a prolonged lifetime of face masks relies on the incorporation of self-cleaning materials. The development of self-cleaning face mask materials requires the presence of a durable catalyst to deactivate contaminants and microbes after long-term use without reducing filtration efficiency. Herein, we generate self-cleaning fibers by functionalizing silicone-based (polydimethylsiloxane, PDMS) fibrous membranes with a photocatalyst. Coaxial electrospinning is performed to fabricate fibers with a non-crosslinked silicone core within a supporting shell scaffold, followed by thermal crosslinking and removal of the water-soluble shell. Photocatalytic zinc oxide nanoparticles (ZnO NPs) are immobilized on the PDMS fibers by colloid-electrospinning or post-functionalization procedures. The fibers functionalized with ZnO NPs can degrade a photo-sensitive dye and display antibacterial properties against Gram-positive and Gram-negative bacteria (Escherichia coli and Staphylococcus aureus) due to the generation of reactive oxygen species upon irradiation with UV light. Furthermore, a single layer of functionalized fibrous membrane shows an air permeability in the range of 80-180 L/m2s and 65% filtration efficiency against fine particulate matter with a diameter less than 1.0 µm (PM1.0). Supplementary Information: The online version contains supplementary material available at 10.1007/s42765-023-00291-7.

Real-time monitoring of the release of multiple payloads from nanomaterials.

We overcome limitations of conventional methods to monitor the release of two payloads in situ. The concentration of two different corrosion inhibitors are simultaneously determined during their release from nanofibers by square wave voltammetry (SWV). SWV is suitable for direct and simultaneous determination of concentration of two payloads.

Fast-release kinetics of a pH-responsive polymer detected by dynamic contact angles.

Polymers conjugated with active agents have applications in biomedicine, anticorrosion, and smart agriculture. When the active agent is used as a drug, corrosion inhibitor, or pesticide, it can be released upon a specific stimulus. The efficiency and the sustainability of active agents are determined by the released kinetics. In this work, we study the fast-release kinetics of 8-hydroxyquinoline (8HQ) from a pH-responsive, random copolymer of methyl methacrylate and 8-quinolinyl-sulfide-ethyl acrylate [P(MMA-co-HQSEA)] by hydrolysis of the ß-thiopropionate groups. We used contact angle measurements of sliding drops as an elegant way to characterize the release kinetics. Based on the results gained from 1H nuclear magnetic resonance measurement, fluorescent intensity measurement, and velocity-dependent contact angle measurement, we found that both the hydrolysis rate and polymer conformation affect the release kinetics of 8HQ from a P(MMA-co-HQSEA) film. Polymer chains collapse and further suppress the release from the inner layer in acidic conditions, while polymer chains in a stretched condition further facilitate the release from the inner layer. As a result, the cumulative release rate of 8HQ is higher in the basic condition than in the acidic condition.

Corrosion-Responsive Self-Healing Coatings.

Organic coatings are one of the most popular and powerful strategies for protecting metals against corrosion. They can be applied in different ways, such as by dipping, spraying, electrophoresis, casting, painting, or flow coating. They offer great flexibility of material designs and cost effectiveness. Moreover, self-healing has evolved as a new research topic for protective organic coatings in the last two decades. Responsive materials play a crucial role in this new research field. However, for targeting the development of high-performance self-healing coatings for corrosion protection, it is not sufficient just to focus on smart responsive materials and suitable active agents for self-healing. A better understanding of how coatings can react on different stimuli induced by corrosion, how these stimuli can spread in the coating, and how the released agents can reach the corroding defect is also of high importance. Such knowledge would allow the design of coatings that are optimized for specific applications. Herein, the requirements and possibilities from the corrosion and synthesis perspectives for designing materials for preparing self-healing coatings for corrosion protection are discussed.

Organocatalytic Polymers from Affordable and Readily Available Building Blocks for the Cycloaddition of CO2 to Epoxides.

The catalytic cycloaddition of CO2 to epoxides to afford cyclic carbonates as useful monomers, intermediates, solvents, and additives is a continuously growing field of investigation as a way to carry out the atom-economic conversion of CO2 to value-added products. Metal-free organocatalytic compounds are attractive systems among various catalysts for such transformations because they are inexpensive, nontoxic, and readily available. Herein, we highlight and discuss key advances in the development of polymer-based organocatalytic materials that match these requirements of affordability and availability by considering their synthetic routes, the monomers, and the supports employed. The discussion is organized according to the number (monofunctional versus bifunctional materials) and type of catalytically active moieties, including both halide-based and halide-free systems. Two general synthetic approaches are identified based on the postsynthetic functionalization of polymeric supports or the copolymerization of monomers bearing catalytically active moieties. After a review of the material syntheses and catalytic activities, the chemical and structural features affecting catalytic performance are discussed. Based on such analysis, some strategies for the future design of affordable and readily available polymer-based organocatalysts with enhanced catalytic activity under mild conditions are considered.

Assembly of biomimetic microreactors using caged-coacervate droplets.

Complex coacervates are liquid-like droplets that can be used to create adaptive cell-like compartments. These compartments offer a versatile platform for the construction of bioreactors inspired by living cells. However, the lack of a membrane significantly reduces the colloidal stability of coacervates in terms of fusion and surface wetting, which limits their suitability as compartments. Here, we describe the formation of caged-coacervates surrounded by a semipermeable shell of silica nanocapsules. We demonstrate that the silica nanocapsules create a protective shell that also regulates the molecular transport of water-soluble compounds as a function of nanocapasule size. The adjustable semipermeability and intrinsic affinity of enzymes for the interior of the caged-coacervates allowed us to assemble biomimetic microreactors with enhanced colloidal stability.

Confining the Sol-Gel Reaction at the Water/Oil Interface: Creating Compartmentalized Enzymatic Nano-Organelles for Artificial Cells.

Living organisms compartmentalize their catalytic reactions in membranes for increased efficiency and selectivity. To mimic the organelles of eukaryotic cells, we develop a mild approach for in situ encapsulating enzymes in aqueous-core silica nanocapsules. In order to confine the sol-gel reaction at the water/oil interface of miniemulsion, we introduce an aminosilane to the silica precursors, which serves as both catalyst and an amphiphilic anchor that electrostatically assembles with negatively charged hydrolyzed alkoxysilanes at the interface. The semi-permeable shell protects enzymes from proteolytic attack, and allows the transport of reactants and products. The enzyme-carrying nanocapsules, as synthetic nano-organelles, are able to perform cascade reactions when enveloped in a polymer vesicle, mimicking the hierarchically compartmentalized reactions in eukaryotic cells. This in situ encapsulation approach provides a versatile platform for the delivery of biomacromolecules.

Osmotic Pressure as Driving Force for Reducing the Size of Nanoparticles in Emulsions.

We describe here a method to decrease particle size of nanoparticles synthesized by miniemulsion polymerization. Small nanoparticles or nanocapsules were obtained by generating an osmotic pressure to induce the diffusion of monomer molecules from the dispersed phase of a miniemulsion before polymerization to an upper oil layer. The size reduction is dependent on the difference in concentration of monomer in the dispersed phase and in the upper oil layer and on the solubility of the monomer in water. By labeling the emulsion droplets with a copolymer of stearyl methacrylate and a polymerizable dye, we demonstrated that the migration of the monomer to the upper hexadecane layer relied on molecular diffusion rather than diffusion of monomer droplets to the oil layer. Moreover, surface tension measurements confirmed that the emulsions were still in the miniemulsion regime and not in the microemulsion regime. The particle size can be tuned by controlling the duration during which the miniemulsion stayed in contact with the hexadecane layer, the interfacial area between the miniemulsion and the hexadecane layer and by the concentration of surfactant. Our method was applied to reduce the size of polystyrene and poly(methyl methacrylate) nanoparticles, nanocapsules of a copolymer of styrene and methyl methacrylic acid, and silica nanocapsules. This work demonstrated that a successful reduction of nanoparticle size in the miniemulsion process can be achieved without using excess amounts of surfactant. The method relies on building osmotic pressure in oil droplets dispersed in water which acts as semipermeable membrane.

Advanced density-based methods for the characterization of materials, binding events, and kinetics.

Investigations of the densities of chemicals and materials bring valuable insights into the fundamental understanding of matter and processes. Recently, advanced density-based methods have been developed with wide measurement ranges (i.e. 0-23 g cm-3), high resolutions (i.e. 10-6 g cm-3), compatibility with different types of samples and the requirement of extremely low volumes of sample (as low as a single cell). Certain methods, such as magnetic levitation, are inexpensive, portable and user-friendly. Advanced density-based methods are, therefore, beneficially used to obtain absolute density values, composition of mixtures, characteristics of binding events, and kinetics of chemical and biological processes. Herein, the principles and applications of magnetic levitation, acoustic levitation, electrodynamic balance, aqueous multiphase systems, and suspended microchannel resonators for materials science are discussed.

Hydrophobically-enhanced "on water" cycloaddition of CO2 to long-chain terminal epoxides.

Long-chain cyclic carbonates (LC-CC) are attractive building blocks and non-ionic surfactants. We demonstrate a convenient methodology to prepare LC-CC in miniemulsions of epoxide droplets in water. The pre-organization and confinement of the reagents from H-bond and hydrophobic interactions allow the target process to proceed at mild temperatures under atmospheric CO2.

Transparent and Self-Healing Elastomers for Reconfigurable 3D Materials.

Transparent soft materials are widely used in applications ranging from packaging to flexible displays, wearable devices, and optical lenses. Nevertheless, soft materials are susceptible to mechanical damage, leading to functional failure and premature disposal. Herein, a transparent self-healing elastomer that is able to repair the polymer network via exchange reactions of dynamic disulfide bonds is introduced. Due to its self-healing ability, the mechanical properties of the elastomer can be recovered as well as its transparency after multiple cycles of abrasion and healing. The self-healing polymer is fabricated into 3D structures by folding or modular origami assembly of planar self-healing polymer sheets. The 3D polymer objects are employed as storage containers of solid and liquid substances, reactors for photopolymerization, and cuvettes for optical measurements (exhibiting superior properties to those of commercial cuvettes). These dynamic polymers show outstanding mechanical, optical, and recycling properties that could potentially be further adapted in adaptive smart packaging, reconfigurable materials, optical devices, and recycling of elastomers.

Degradable polyprodrugs: design and therapeutic efficiency.

Prodrugs are developed to increase the therapeutic properties of drugs and reduce their side effects. Polyprodrugs emerged as highly efficient prodrugs produced by the polymerization of one or several drug monomers. Polyprodrugs can be gradually degraded to release therapeutic agents. The complete degradation of polyprodrugs is an important factor to guarantee the successful disposal of the drug delivery system from the body. The degradation of polyprodrugs and release rate of the drugs can be controlled by the type of covalent bonds linking the monomer drug units in the polymer structure. Therefore, various types of polyprodrugs have been developed based on polyesters, polyanhydrides, polycarbonates, polyurethanes, polyamides, polyketals, polymetallodrugs, polyphosphazenes, and polyimines. Furthermore, the presence of stimuli-responsive groups, such as redox-responsive linkages (disulfide, boronate ester, metal-complex, and oxalate), pH-responsive linkages (ester, imine, hydrazone, acetal, orthoester, P-O and P-N), light-responsive (metal-complex, o-nitrophenyl groups) and enzyme-responsive linkages (ester, peptides) allow for a selective degradation of the polymer backbone in targeted tumors. We envision that new strategies providing a more efficient synergistic therapy will be developed by combining polyprodrugs with gene delivery segments and targeting moieties.