RESUMEN
Seed size and shape are important traits that determine seed yield in sesame. Understanding the genetic basis of seed size and shape is essential for improving the yield of sesame. In this study, F2 and BC1 populations were developed by crossing the Yuzhi 4 and Bengal small-seed (BS) lines for detecting the quantitative trait loci (QTLs) of traits related to seed size and shape. A total of 52 QTLs, including 13 in F2 and 39 in BC1 populations, for seed length (SL), seed width (SW), and length to width ratio (L/W) were identified, explaining phenotypic variations from 3.68 to 21.64%. Of these QTLs, nine stable major QTLs were identified in the two populations. Notably, three major QTLs qSL-LG3-2, qSW-LG3-2, and qSW-LG3-F2 that accounted for 4.94-16.34% of the phenotypic variations were co-localized in a 2.08 Mb interval on chromosome 1 (chr1) with 279 candidate genes. Three stable major QTLs qSL-LG6-2, qLW-LG6, and qLW-LG6-F2 that explained 8.14-33.74% of the phenotypic variations were co-localized in a 3.27 Mb region on chr9 with 398 candidate genes. In addition, the stable major QTL qSL-LG5 was co-localized with minor QTLs qLW-LG5-3 and qSW-LG5 to a 1.82 Mb region on chr3 with 195 candidate genes. Gene annotation, orthologous gene analysis, and sequence analysis indicated that three genes are likely involved in sesame seed development. These results obtained herein provide valuable in-formation for functional gene cloning and improving the seed yield of sesame.
Asunto(s)
Sitios de Carácter Cuantitativo , Sesamum , Sitios de Carácter Cuantitativo/genética , Sesamum/genética , Mapeo Cromosómico/métodos , Fenotipo , Semillas/genéticaRESUMEN
Introduction: Sesame seeds have become an irreplaceable source of edible oils and food products with rich nutrients and a unique flavor, and their metabolite contents and physiological functions vary widely across different seed coat colors. Although the quantitative trait loci (QTLs) for genetic variation in seed coat color have been extensively investigated, the identification of unique genetic loci for intermediate colors such as brown has not been reported due to their complexity. Methods: Here, we crossed the white sesame 'Yuzhi No. 8' (YZ8) and the brown sesame 'Yanzhou Erhongpi' (YZEHP) to construct a recombinant inbred line (RIL) population with consecutive self-fertilization for ten generations. Results: The selfed F1 seeds were brown which was controlled by a dominant gene. Based on the genotyping by whole-genome resequencing of the RILs, a major-effect QTL for brown coat color was identified through both bulk segregant analysis (BSA) and genetic linkage mapping in sesame, which was located within a 1.19 Mb interval on chromosome 6 (qBSCchr6). Moreover, we found that the YZEHP seed coat initially became pigmented at 20 days post-anthesis (DPA) and was substantially colored at 30 DPA. We screened 13 possible candidate genes based on the effects of genetic variants on protein coding and predicted gene functions. Furthermore, qRTâPCR was used to verify the expression patterns of these genes in different post-anthesis developmental periods. We noted that in comparison to YZ8 seeds, YZEHP seeds had expression of SIN_1023239 that was significantly up-regulated 2.5-, 9.41-, 6.0-, and 5.9-fold at 15, 20, 25, and 30 DPA, respectively, which was consistent with the pattern of brown seed coat pigment accumulation. Discussion: This study identified the first major-effect QTL for the control of the brown seed coat trait in sesame. This finding lays the foundation for further fine mapping and cloning as well as investigating the regulatory mechanism of seed coat color in sesame.
RESUMEN
Sesame (Sesamum indicum L.) is an important and ancient oilseed crop. Sesame seed coat color is related to biochemical functions involved in protein and oil metabolism, and antioxidant content. Because of its complication, the genetic basis of sesame seed coat color remains poorly understood. To elucidate the factors affecting the genetic architecture of seed coat color, 366 sesame germplasm lines were evaluated for seed coat color in 12 environments. The genome-wide association studies (GWAS) for three seed coat color space values, best linear unbiased prediction (BLUP) values from a multi-environment trial analysis and principal component scores (PCs) of three seed coat color space values were conducted. GWAS for three seed coat color space values identified a total of 224 significant single nucleotide polymorphisms (SNPs, P < 2.34×10-7), with phenotypic variation explained (PVE) ranging from 1.01% to 22.10%, and 35 significant SNPs were detected in more than 6 environments. Based on BLUP values, 119 significant SNPs were identified, with PVE ranging from 8.83 to 31.98%. Comparing the results of the GWAS using phenotypic data from different environments and the BLUP values, all significant SNPs detected in more than 6 environments were also detected using the BLUP values. GWAS for PCs identified 197 significant SNPs, and 30 were detected in more than 6 environments. GWAS results for PCs were consistent with those for three color space values. Out of 224 significant SNPs, 22 were located in the confidence intervals of previous reported quantitative trait loci (QTLs). Finally, 92 candidate genes were identified in the vicinity of the 4 SNPs that were most significantly associated with sesame seed coat color. The results in this paper will provide new insights into the genetic basis of sesame seed coat color, and should be useful for molecular breeding in sesame.
Asunto(s)
Pigmentación/genética , Polimorfismo de Nucleótido Simple , Sitios de Carácter Cuantitativo , Semillas/genética , Sesamum/genética , Estudio de Asociación del Genoma CompletoRESUMEN
Improving yield is one of the most important targets of sesame breeding. Identifying quantitative trait loci (QTLs) of yield-related traits is a prerequisite for marker-assisted selection (MAS) and QTL/gene cloning. In this study, a BC1 population was developed and genotyped with the specific-locus amplified fragment (SLAF) sequencing technology, and a high-density genetic map was constructed. The map consisted of 13 linkage groups, contained 3528 SLAF markers, and covered a total of 1312.52 cM genetic distance, with an average distance of 0.37 cM between adjacent markers. Based on the map, 46 significant QTLs were identified for seven yield-related traits across three environments. These QTLs distributed on 11 linkage groups, each explaining 2.34-71.41% of the phenotypic variation. Of the QTLs, 23 were stable QTLs that were detected in more than one environment, and 20 were major QTLs that explained more than 10% of the corresponding phenotypic variation in at least one environment. Favorable alleles of 38 QTLs originated from the locally adapted variety, Yuzhi 4; the exotic germplasm line, BS, contributed favorable alleles to only 8 QTLs. The results should provide useful information for future molecular breeding and functional gene cloning. Supplementary Information: The online version contains supplementary material available at 10.1007/s11032-021-01236-x.
RESUMEN
[This corrects the article on p. 1189 in vol. 8, PMID: 28729877.].
RESUMEN
The characterization of genetic diversity and population structure can be used in tandem to detect reliable phenotype-genotype associations. In the present study, we genotyped a set of 366 sesame germplasm accessions by using 89,924 single-nucleotide polymorphisms (SNPs). The number of SNPs on each chromosome was consistent with the physical length of the respective chromosome, and the average marker density was approximately 2.67 kb/SNP. The genetic diversity analysis showed that the average nucleotide diversity of the panel was 1.1 × 10-3, with averages of 1.0 × 10-4, 2.7 × 10-4, and 3.6 × 10-4 obtained, respectively for three identified subgroups of the panel: Pop 1, Pop 2, and the Mixed. The genetic structure analysis revealed that these sesame germplasm accessions were structured primarily along the basis of their geographic collection, and that an extensive admixture occurred in the panel. The genome-wide linkage disequilibrium (LD) analysis showed that an average LD extended up to â¼99 kb. The genetic diversity and population structure revealed in this study should provide guidance to the future design of association studies and the systematic utilization of the genetic variation characterizing the sesame panel.
RESUMEN
A good genetic map can provide the framework for quantitative trait loci (QTL) analysis, map-based gene cloning, and genome sequence assembling. The main objectives of this study were to develop a high-density genetic linkage map using specific length amplified fragment sequencing (SLAF-seq) in sesame. In the result, a high-resolution genetic map with 9,378 SLAF markers and 13 linkage groups (LGs) was constructed. The map spanned a total genetic distance of 1,974.23 cM, and the mean LG length was 151.86 cM, with an average genetic distance of 0.22 cM between adjacent markers. Based on the newly constructed genetic map, genes for basal branching habit (SiBH) and flowers per leaf axil (SiFA) were mapped to LG5 and LG11, respectively.