Non-innocent Role of the Halide Ligand in the Copper-Catalyzed Olefin Aziridination Reaction.

In the context of copper-catalyzed nitrene transfer to olefins, many systems operate upon mixing a CuX salt (X = halide, OTf) and a polydentate N-based ligand, assuming that the X ligand is displaced from the coordination sphere toward a counterion position. Herein, we demonstrated that such general assumption should be in doubt since studies carried out with the well-defined copper(I) complexes (TTM)CuCl and [(TTM)Cu(NCMe)]PF6 (TTM = tris(triazolyl)methane ligand) demonstrate a dual behavior from a catalytic and mechanistic point of view that exclusively depends on the presence or absence of the chloride ligand bonded to the metal center. When coordinated, the turnover-limiting step corresponds to the formation of the carbon-nitrene bond, whereas in its absence, the highest barrier corresponds to the formation of the copper-nitrene intermediate.

Introducing the Catalytic Amination of Silanes via Nitrene Insertion.

The direct functionalization of Si-H bonds by the nitrene insertion methodology is described. A copper(I) complex bearing a trispyrazolylborate ligand catalyzes the transfer of a nitrene group from PhI═NTs to the Si-H bond of silanes, disilanes, and siloxanes, leading to the exclusive formation of Si-NH moieties in the first example of this transformation. The process tolerates other functionalities in the substrate such as several C-H bonds and alkyne and alkene moieties directly bonded to the silicon center. Density functional theory (DFT) calculations provide a mechanistic interpretation consisting of a Si-H homolytic cleavage and subsequent rebound to the Si-centered radical.

Intermolecular Allene Functionalization by Silver-Nitrene Catalysis.

Under silver catalysis conditions, using [Tp*,BrAg]2 as the catalyst precursor, allenes react with PhI═NTs in the first example of efficient metal-mediated intermolecular nitrene transfer to such substrates. The nature of the substituent at the allene seems crucial for the reaction outcome since arylallenes are converted into azetidine derivatives, whereas methylene aziridines are the products resulting from alkylallenes. Mechanistic studies allow proposing that azetidines are formed through unstable cyclopropylimine intermediates, which further incorporate a second nitrene group, both processes being silver-mediated. Methylene aziridines from alkylallenes derive from catalytic nitrene addition to the allene double bonds. Both routes have resulted to be productive for further synthetic transformations affording aminocyclopropanes.

Trispyrazolylborate Ligands Supported on Vinyl Addition Polynorbornenes and Their Copper Derivatives as Recyclable Catalysts.

Polynorbornenes prepared by vinyl addition polymerization and bearing pendant alkenyl groups serve as skeletons to support trispyrazolylborate ligands (Tpx ) built at those alkenyl sites. Reaction with CuI in acetonitrile led to VA-PNB-Tpx Cu(NCMe) (VA-PBN=vinyl addition polynorbornene) with a 0.8-1.4 mmol incorporation of Cu per gram of polymer. The presence of tetracoordinated copper(I) ions was been assessed by FTIR studies on the corresponding VA-PNB-Tpx Cu(CO) adducts, in agreement with those on discrete Tpx Cu(CO). The new materials were employed as heterogeneous catalysts in several carbene- and nitrene-transfer reactions, showing a behavior similar to that of the homogeneous counterparts but also being recycled several times maintaining a high degree of activity and selectivity. This is the first example of supported Tpx ligands onto polymeric supports with catalytic applications.

Catalytic Nitrene Transfer To Alkynes: A Novel and Versatile Route for the Synthesis of Sulfinamides and Isothiazoles.

A novel transformation is reported for the reaction of terminal or internal alkynes with the nitrene precursor PhI=NTs (Ts=p-toluenesulfonyl) in the presence of catalytic amounts of TpBr3 Cu(NCMe) (TpBr3 =hydrotris(3,4,5-tribromo-pyrazolylborate). Two products containing an imine functionality have been isolated from the reaction mixtures, identified as sulfinamides and isothiazoles. The former correspond to the formal reduction of the sulfone group into sulfoxide, whereas the latter involves the insertion of an alkyne carbon atom into the aromatic ring of the N-tosyl moiety.

Functional-Group-Tolerant, Silver-Catalyzed N-N Bond Formation by Nitrene Transfer to Amines.

Silver(I) promotes the highly chemoselective N-amidation of tertiary amines under catalytic conditions to form aminimides by nitrene transfer from PhI═NTs. Remarkably, this transformation proceeds in a selective manner in the presence of olefins and other functional groups without formation of the commonly observed aziridines or C-H insertion products. The methodology can be applied not only to rather simple tertiary amines but also to complex natural molecules such as brucine or quinine, where the products derived from N-N bond formation were exclusively formed. Theoretical mechanistic studies have shown that this selective N-amidation reaction proceeds through triplet silver nitrenes.

A competing, dual mechanism for catalytic direct benzene hydroxylation from combined experimental-DFT studies.

A dual mechanism for direct benzene catalytic hydroxylation is described. Experimental studies and DFT calculations have provided a mechanistic explanation for the acid-free, Tp x Cu-catalyzed hydroxylation of benzene with hydrogen peroxide (Tp x = hydrotrispyrazolylborate ligand). In contrast with other catalytic systems that promote this transformation through Fenton-like pathways, this system operates through a copper-oxyl intermediate that may interact with the arene ring following two different, competitive routes: (a) electrophilic aromatic substitution, with the copper-oxyl species acting as the formal electrophile, and (b) the so-called rebound mechanism, in which the hydrogen is abstracted by the Cu-O moiety prior to the C-O bond formation. Both pathways contribute to the global transformation albeit to different extents, the electrophilic substitution route seeming to be largely favoured.

Gold and diazo reagents: a fruitful tool for developing molecular complexity.

Since the discovery in 2005 of the potential of soluble Au complexes to catalyse the transfer of carbene groups from diazo compounds to organic substrates, an increasing number of transformations have been reported. In this contribution, the advances in the field are presented as foundations for further developments in the incoming years.

Iron and Manganese Catalysts for the Selective Functionalization of Arene C(sp(2) )-H Bonds by Carbene Insertion.

The first examples of the direct functionalization of non-activated aryl sp(2) C-H bonds with ethyl diazoacetate (N2 CHCO2 Et) catalyzed by Mn- or Fe-based complexes in a completely selective manner are reported, with no formation of the frequently observed cycloheptatriene derivatives through competing Buchner reaction. The best catalysts are Fe(II) or Mn(II) complexes bearing the tetradentate pytacn ligand (pytacn= 1-(2-pyridylmethyl)-4,7-dimethyl-1,4,7-triazacyclononane). When using alkylbenzenes, the alkylic C(sp(3) )-H bonds of the substituents remained unmodified, thus the reaction being also selective toward functionalization of sp(2) C-H bonds.

Evidencing an inner-sphere mechanism for NHC-Au(I)-catalyzed carbene-transfer reactions from ethyl diazoacetate.

Kinetic experiments based on the measurement of nitrogen evolution in the reaction of ethyl diazoacetate (N2CHCO2Et, EDA) and styrene or methanol catalyzed by the [IPrAu](+) core (IPr = 1,3-bis(diisopropylphenyl)imidazole-2-ylidene) have provided evidence that the transfer of the carbene group CHCO2Et to the substrate (styrene or methanol) takes place in the coordination sphere of Au(I) by means of an inner-sphere mechanism, in contrast to the generally accepted proposal of outer-sphere mechanisms for Au(I)-catalyzed reactions.

Catalytic functionalization of low reactive C(sp(3))-H and C(sp(2))-H bonds of alkanes and arenes by carbene transfer from diazo compounds.

The direct functionalization of low reactive C(sp(3))-H and C(sp(2))-H bonds of alkanes and arenes, respectively, by metal-induced carbene transfer from diazo compounds is reviewed. To date, this methodology has enabled the incorporation of CR(1)R(2) moieties from N2[double bond, length as m-dash]CR(1)R(2) in a chemo, regio, enantio or diastereoselective manner in those substrates with the appropriate selection of metal and ligands.

A fully recyclable heterogenized Cu catalyst for the general carbene transfer reaction in batch and flow.

A polystyrene-linked tris(triazolyl)methanecopper(i) cationic catalyst operates under heterogeneous conditions for the reaction of ethyl diazoacetate (EDA) with an array of substrates. Carbon-hydrogen as well as X-H (X = O, N) functionalization derived from the formal transfer of the carbene moiety (:CHCO2Et) from the copper center and subsequent insertion have been achieved, the reactions permitting repeated catalyst recycling and reuse. The addition of the same carbene unit to benzene leading to a cycloheptatriene derivative (Büchner reaction) or to phenylacetylene (cyclopropenation) took place at similar rates to the insertion processes and with the same catalyst recyclability. The use of this heterogenized cationic Cu catalyst in continuous flow has also been implemented. Key characteristics of the flow process are its high and constant turnover frequency (TOF) (residence times of 1 min still lead to full conversion in the reaction with ethanol after 48 h operation) and its suitability for the sequential performance of different types of carbene transfer reactions with a simple and affordable experimental setup.

Chemo-, regio-, and stereoselective silver-catalyzed aziridination of dienes: scope, mechanistic studies, and ring-opening reactions.

Silver complexes bearing trispyrazolylborate ligands (Tp(x)) catalyze the aziridination of 2,4-diene-1-ols in a chemo-, regio-, and stereoselective manner to give vinylaziridines in high yields by means of the metal-mediated transfer of NTs (Ts = p-toluensulfonyl) units from PhI═NTs. The preferential aziridination occurs at the double bond neighboring to the hydroxyl end in ca. 9:1 ratios that assessed a very high degree of regioselectivity. The reaction with the silver-based catalysts proceeds in a stereospecific manner, i.e., the initial configuration of the C═C bond is maintained in the aziridine product (cis or trans). The degree of regioselectivity was explained with the aid of DFT studies, where the directing effect of the OH group of 2,4-diene-1-ols plays a key role. Effective strategies for ring-opening of the new aziridines, deprotection of the Ts group, and subsequent formation of ß-amino alcohols have also been developed.

Introducing copper as catalyst for oxidative alkane dehydrogenation.

The dehydrogenation of n-hexane and cycloalkanes giving n-hexene and cycloalkenes has been observed in the reaction of such hydrocarbons with hydrogen peroxide, in the presence of copper complexes bearing trispyrazolylborate ligands. This catalytic transformation provides the typical oxidation products (alcohol and ketones) with small amounts of the alkenes, a novel feature in this kind of oxidative processes. Experimental data exclude the participation of hydroxyl radicals derived from Fenton-like reaction mechanisms. DFT studies support a copper-oxo active species, which initiates the reaction by H abstraction. Spin crossover from the triplet to the singlet state, which is required to recover the catalyst, yields the major hydroxylation and minor dehydrogenation products. Further calculations suggested that the superoxo and hydroperoxo species are less reactive than the oxo. A complete mechanistic proposal in agreement with all experimental and computational data is proposed.

Catalytic cross-coupling of diazo compounds with coinage metal-based catalysts: an experimental and theoretical study.

We examined the ability of Tp(x)M (Tp(x) = hydrotris(pyrazolyl)borate ligand; M = Cu and Ag) and IPrMCl (IPr = 1,3-bis(diisopropylphenyl)imidazol-2-ylidene; M = Cu, Ag, Au) complexes as catalyst precursors for the cross-coupling of diazo compounds. Experimental data showed that the metal centre can be tuned with the appropriate selection of the ligand to yield either the homo- or hetero-coupling (cross-coupling) products. A computational study of the reaction mechanism allowed the rationalization of the experimental reactivity patterns, and the identification of the key reaction step controlling the selectivity: the initial reaction between the metallocarbene intermediate and one of the diazo compounds.

A general mechanism for the copper- and silver-catalyzed olefin aziridination reactions: concomitant involvement of the singlet and triplet pathways.

The olefin aziridination reactions catalyzed by copper and silver complexes bearing hydrotris(pyrazolyl)borate (Tp(x)) ligands have been investigated from a mechanistic point of view. Several mechanistic probe reactions were carried out, specifically competition experiments with p-substituted styrenes, stereospecificity of olefins, effects of the radical inhibitors, and use of a radical clock. Data from these experiments seem to be contradictory, as they do not fully support the previously reported concerted or stepwise mechanisms. But theoretical calculations have provided the reaction profiles for both the silver and copper systems with different olefins to satisfy all experimental data. A mechanistic proposal has been made on the basis of the information that we collected from experimental and theoretical studies. In all cases, the reaction starts with the formation of a metal-nitrene species that holds some radical character, and therefore the aziridination reaction proceeds through the radical mechanism. The silver-based systems however hold a minimum energy crossing point (MECP) between the triplet and closed-shell singlet surfaces, which induce the direct formation of the aziridines, and stereochemistry of the olefin is retained. In the case of copper, a radical intermediate is formed, and this intermediate constitutes the starting point for competition steps involving ring-closure (through a MECP between the open-shell singlet and triplet surfaces) or carbon-carbon bond rotation, and explains the loss of stereochemistry with a given substrate. Overall, all the initially contradictory experimental data fit in a mechanistic proposal that involves both the singlet and the triplet pathways.

Gold-catalyzed naphthalene functionalization.

The complexes IPrMCl (IPr = 1,3-bis(diisopropylphenyl)imidazol-2-ylidene, M = Cu, 1a; M = Au, 1b), in the presence of one equiv of NaBAr'(4) (Ar' = 3,5-bis(trifluoromethyl)phenyl), catalyze the transfer of carbene groups: C(R)CO(2)Et (R = H, Me) from N(2)C(R)CO(2)Et to afford products that depend on the nature of the metal center. The copper-based catalyst yields exclusively a cycloheptatriene derivative from the Buchner reaction, whereas the gold analog affords a mixture of products derived either from the formal insertion of the carbene unit into the aromatic C-H bond or from its addition to a double bond. In addition, no byproducts derived from carbene coupling were observed.

Direct, copper-catalyzed oxidation of aromatic C-H bonds with hydrogen peroxide under acid-free conditions.

The direct oxidation of benzene into phenol using hydrogen peroxide has been achieved in the absence of any acid with Tp(x)Cu(NCMe) complexes as the catalysts. In the case of anthracenes as the substrates, valuable anthraquinones have been quantitatively obtained in the same manner.

Silver-catalyzed C-C bond formation between methane and ethyl diazoacetate in supercritical CO2.

Even in the context of hydrocarbons' general resistance to selective functionalization, methane's volatility and strong bonds pose a particular challenge. We report here that silver complexes bearing perfluorinated indazolylborate ligands catalyze the reaction of methane (CH(4)) with ethyl diazoacetate (N(2)CHCO(2)Et) to yield ethyl propionate (CH(3)CH(2)CO(2)Et). The use of supercritical carbon dioxide (scCO(2)) as the solvent is key to the reaction's success. Although the catalyst is only sparingly soluble in CH(4)/CO(2) mixtures, optimized conditions presently result in a 19% yield of ethyl propionate (based on starting quantity of the diazoester) at 40°C over 14 hours.