Enhancing Photoreduction of Cr(VI) through a Multivalent Manganese(II)-Organic Framework Incorporating Anthracene Moieties.

Exploiting a photocatalyst with high stability and excellent activity for Cr(VI) reduction under mild conditions is crucial yet challenging. Herein, the rigid aromatic multicarboxylate ligand with chromophore anthracene was selected to coordinate with multivalent metal ion manganese and to obtain a stable two-dimensional (2D) Mn-based metal-organic framework (MOF), LCUH-120, which can efficiently and quickly convert Cr(VI) into Cr(III) under light without the need for any additional photosensitizer. The efficient photosensitive anthracene group serves as a photosensitizer center and multivalent Mn(II) ion as a photocatalyst center in LCUH-120, and the conversion of Cr(VI) to Cr(III) can be realized completely in just 40 min. Specifically, the rate constant (k) and reduction rate of the Cr(VI) photocatalytic reaction can be high up to 0.134 min-1 and 2.50 mgCr(VI) g-1cata min-1 in an acidic environment (pH = 2), respectively. Compared to our previously reported three-dimensional (3D) Sm-MOF, LCUH-120 exhibits a significantly higher catalytic reaction rate, which might be ascribed to the fact that the photocatalyst center Mn node can improve the rate of electron transfer and promote the separation of holes and photogenerated electrons. In an acidic environment, the reaction mechanism can be verified through various contrast experiments and theoretical simulations.

A Multifunctional Co-Based Metal-Organic Framework as a Platform for Proton Conduction and Ni trophenols Reduction.

The design and development of proton conduction materials for clean energy-related applications is obviously important and highly desired but challenging. An ultrastable cobalt-based metal-organic framework Co-MOF, formulated as [Co2(btzip)2(µ2-OH2)] (namely, LCUH-103, H2btzip = 4, 6-bis(triazol-1-yl)-isophthalic acid) had been successfully synthesized via the hydrothermal method. LCUH-103 exhibits a three-dimensional framework and a one-dimensional microporous channel structure with scu topology based on the binuclear metallic cluster {Co2}. LCUH-103 indicated excellent chemical and thermal stability; peculiarly, it can retain its entire framework in acid and alkali solutions with different pH values for 24 h. The excellent stability is a prerequisite for studying its proton conductivity, and its proton conductivity σ can reach up to 1.25 × 10-3 S·cm-1 at 80 °C and 100% relative humidity (RH). In order to enhance its proton conductivity, the proton-conducting material Im@LCUH-103 had been prepared by encapsulating imidazole molecules into the channels of LCUH-103. Im@LCUH-103 indicated an excellent proton conductivity of 3.18 × 10-2 S·cm-1 at 80 °C and 100% RH, which is 1 order of magnitude higher than that of original LCUH-103. The proton conduction mechanism was systematically studied by various detection means and theoretical calculations. Meanwhile, LCUH-103 is also an excellent carrier for palladium nanoparticles (Pd NPs) via a wetness impregnation strategy, and the nitrophenols (4/3/2-NP) reduction in aqueous solution by Pd@LCUH-103 indicated an outstanding conversion efficiency, high rate constant (k), and exceptional cycling stability. Specifically, the k value of 4-NP reduction by Pd@LCUH-103 is superior to many other reported catalysts, and its k value is as high as 1.34 min-1 and the cycling stability can reach up to 6 cycles. Notably, its turnover frequency (TOF) value is nearly 196.88 times more than that of Pd/C (wt 5%) in the reaction, indicating its excellent stability and catalytic activity.

Two-Dimensional Lanthanide Metal-Organic Frameworks as a Platform for Sensing Pollutant and Nitrophenols Reduction.

The discharge of harmful and toxic pollutants in water is destroying the ecosystem balance and human being health at an alarming rate. Therefore, the detection and removal of water pollutants by using stable and efficient materials are significant but challenging. Herein, three novel lanthanide metal-organic frameworks (Ln-MOFs), [La(L)(DMF)2(H2O)2]·H2O (LCUH-104), [Nd(L)(DMF)2(H2O)2]·H2O (LCUH-105), and [Pr(L)(DMF)2(H2O)2]·H2O (LCUH-106) [H3L = 5-(4-(tetrazol-5-yl)phenyl)isophthalic acid (H3TZI)] were solvothermally constructed and structurally characterized. In the three Ln-MOFs, dinuclear metallic clusters {Ln2} were connected by deprotonated tetrazol-containing dicarboxylate TZI3- to obtain a 2D layered framework with a point symbol of {42·84}·{46}. Their excellent chemical and thermal stabilities were beneficial to carry out fluorescence sensing and achieve the catalytic nitrophenols (NPs) reduction. Especially, the incorporation of the nitrogen-rich tetrazole ring into their 2D layered frameworks enables the fabrication of Pd nanocatalysts (Pd NPs@LCUH-104/105/106) and have dramatically enhanced catalytic activity by using the unique metal-support interactions between three Ln-MOFs and the encapsulating palladium nanoparticles (Pd NPs). Specifically, the reduction of NPs (2-NP, 3-NP, and 4-NP) in aqueous solution by Pd NPs@LCUH-104 exhibits exceptional conversion efficiency, remarkable rate constants (k), and outstanding cycling stability. The catalytic rate of Pd NPs@LCUH-104 for 4-NP is nearly 8.5 times more than that of Pd/C (wt 5%) and its turnover frequency value is 0.051 s-1, which indicate its excellent catalytic activity. Meanwhile, LCUH-105, as a multifunctional fluorescence sensor, exhibited excellent fluorescence detection of norfloxacin (NFX) (turn on) and Cr2O72- (turn off) with high selectivity and sensitivity at a low concentration, and the corresponding fluorescence enhancement/quenching mechanism has also been systematically investigated through various detection means and theoretical calculations.

Series of Dual Functional Two-Dimensional RE-OFs for Nitrophenol Reduction and Dye Separation.

The rational design and preparation of stable and multifunctional metal-organic frameworks (MOFs) with excellent catalysis and adsorption properties are desirable but are great challenges. The nitrophenol (NP) reduction to aminophenols (APs) by using the catalyst Pd@MOFs is an effective strategy, which has attracted extensive attention in recent years. Here, we report four stable isostructural two-dimensional (2D) rare earth metal-organic frameworks [RE4(AAPA)6(DMA)2 (H2O)4][DMA]3[H2O]8 (namely LCUH-101, RE = Eu, Gd, Tb, Y; AAPA2- = 5-[(anthracen-9-yl-methyl)-amino]-1,3-isophthalate), which feature a 2D layer structure with sql topology of point symbol {44·62} and exhibit excellent chemical stability and thermostability. The as-synthesized Pd@LCUH-101 was utilized for the catalytic reduction of 2/3/4-nitrophenol, which indicates high catalytic activity and recyclability attributed to the synergistic effect between Pd nanoparticles and the 2D layered structure. Of note, the turnover frequency (TOF), the reaction rate constant (k), and the activation energy (Ea) of Pd@LCUH-101 (Eu) in the reduction of 4-NP, respectively, are 1.09 s-1, 2.17 min-1, and 50.2 kJ·mol-1, which show that it has superior catalytic activity. Remarkably, LCUH-101 (Eu, Gd, Tb, and Y) are multifunctional MOFs that can effectively absorb and separate mixed dyes. The appropriate interlayer spacing enables them to efficiently adsorb methylene blue (MB) and rhodamine B (RhB) in aqueous solution, with adsorption capacities of 0.97 and 0.41 g·g-1, respectively, which is one of the highest values among those of the reported MOF-based adsorbers. Meanwhile, LCUH-101 (Eu) can be used for the separation of the dye mixture MB/MO and RhB/MO, and the excellent reusability enables LCUH-101 (Eu) to be used as chromatographic column filters to quickly separate and recover dyes. Therefore, this work provides a new strategy for the exploitation of stable and efficient catalysts for NP reduction and adsorbents for dyes.

Ultrathin coordination polymer nanosheets modified with carbon quantum dots for ultrasensitive ammonia sensors.

Exposure to ammonia (NH3) is known harmful to health, environment and industrial facilities, hence it is important for the trace detection of NH3. Herein, for the first time, ultrasensitive room temperature NH3 sensors are realized by assembling carbon quantum dots (CQDs) on free-standing ultrathin coordination polymers (CPs) nanosheets (Co[Ni(CN)4]) with an average thickness of ∼2.5 nm, which demonstrate excellent sensitivity (Ra/Rg = 87.7 to 30 ppm), fast gas response speed (∼10 s to 30 ppm), remarkable repeatability, high selectivity, good long-term stability and low limit of theoretical detection (∼8 ppb) toward NH3 gas. The NH3 gas sensor enhancement through incorporation of CQDs provides a simple and environment-friendly strategy for further improving sensor property of CPs nanosheets. This work provides an effective way to construct new electrode materials for high-performance gas sensor devices via the rational design.

Recent advances in metal-organic frameworks for gas adsorption/separation.

The unique structural advantage of metal-organic frameworks (MOFs) determines the great prospect and developability in gas adsorption and separation. Both ligand design and microporous engineering based on crystal structure are significant lever for coping with new application exploration and requirements. Focusing on the designable pore and modifiable frameworks of MOFs, this review discussed the recent advances in the field of gas adsorption and separation, and analyzed the host-guest interaction, structure-performance relations, and the adsorption/separation mechanism from ligand design, skeleton optimization, metal node regulation, and active sites construction. Based on the function-oriented perspective, we summarized the main research recently, and made an outlook based on the focus of microporous MOFs that require further attention in the structure design and industrial application.

Series of TM-OFs as a Platform for Efficient Catalysis and Multifunctional Luminescence Sensing.

Three novel porous transition-metal-organic frameworks (TM-OFs), formulated as [Co3(DCPN)2(µ2-OH2)4(H2O)4](DMF)2 (1), [Cd3(DCPN)2(µ2-OH2)4(H2O)4](DMF)2 (2), and [CdK(DCPN)(DMA)] (3), have been successfully prepared via solvothermal conditions based on a 5-(3',6'-dicarboxylic phenyl) nicotinic carboxylic acid (H3DCPN) ligand. 1 and 2 both have the same porous 3D network structure with the point symbol of {410·614·84}·{45·6}2 based on trinuclear ({Co3} or {Cd3}) clusters, indicating a one-dimensional porous channel, and possess excellent water and thermal stability; 3 also displays a porous 3D network structure with a 4-connected sra topology based on the heteronuclear metal cluster {CdK}. Complex 1 can be used to load Pd nanoparticles (Pd NPs) via a wetness impregnation strategy to obtain Pd@1. The reduction of nitrophenols (2-NP, 3-NP, 4-NP) by Pd@1 in aqueous solution shows outstanding conversion, excellent rate constants (k), and remarkable cycling stability due to the synergistic effect of complex 1 and Pd NPs. Luminescence sensing tests confirmed that 2 is a reliable multifunctional chemical sensor with high selectivity and sensitivity for low concentrations of Fe3+, Cr2O72-, CPFX, and NFX. Specifically, 2 shows a fluorescence enhancement behavior toward fluoroquinolone antibiotics (CPFX and NFX), which has not been reported previously in the literature. Moreover, the rational mechanism of fluorescence sensing was also systematically investigated by various detection means and theoretical calculations.

Ultrathin MOF nanosheet-based resistive sensors for highly sensitive detection of methanol.

Sensors with high-sensitivity for resistive methanol gas detection are highly desirable. Herein, we report newly designed ultrathin anionic metal-organic framework (MOF) nanosheets (NSs), with an average thickness of 10 nm and an electrical conductivity of 3.77 × 10-4 S cm-1. The ultrathin MOF NSs can be used as the active material in an electronic methanol gas sensor, which exhibits high sensitivity toward methanol gas at room temperature, i.e., high Rair/Rgas (363.2 at 100 ppm), fast gas response/recovery speed (6 s/2 s at 20 ppm), long-term stability, and superior cross-selectivity against other interfering gases.

Synthesis and Visualization of Entangled 3D Covalent Organic Frameworks with High-Valency Stereoscopic Molecular Nodes for Gas Separation.

The structural diversity of three-dimensional (3D) covalent organic frameworks (COFs) are limited as there are only a few choices of building units with multiple symmetrically distributed connection sites. To date, 4 and 6-connected stereoscopic nodes with Td , D3h , D3d and C3 symmetries have been mostly reported, delivering limited 3D topologies. We propose an efficient approach to expand the 3D COF repertoire by introducing a high-valency quadrangular prism (D4h ) stereoscopic node with a connectivity of eight, based on which two isoreticular 3D imine-linked COFs can be created. Low-dose electron microscopy allows the direct visualization of their 2-fold interpenetrated bcu networks. These 3D COFs are endowed with unique pore architectures and strong molecular binding sites, and exhibit excellent performance in separating C2 H2 /CO2 and C2 H2 /CH4 gas pairs. The introduction of high-valency stereoscopic nodes would lead to an outburst of new topologies for 3D COFs.

Series of Stable Anionic Lanthanide Metal-Organic Frameworks as a Platform for Pollutant Separation and Efficient Nanoparticle Catalysis.

Eight new stable porous lanthanide metal-organic frameworks (Ln-OFs), namely, [Ln2(BPTC)2][(CH3)2NH2]2 [Ln = Ho (1), Eu (2), Gd (3), Dy (4), Er (5), Tm (6), Yb (7), Lu (8)], were prepared by 3,3',5,5'-biphenyltetracarboxylic acid (H4BPTC) and lanthanide ions by solvothermal reactions. Complexes 1-8 show a three-dimensional (3D) 6,6-connected network {412·63}·{48·66·8} topology based on binuclear (Ln2) clusters and feature a one-dimensional curving porous channel occupied by exchangeable dimethylamine cations ([(CH3)2NH2]+) in the 3D anionic frameworks. The occupied [(CH3)2NH2]+ in the anionic channels exhibited excellent ion-exchange ability, which is favorable to Pd2+ and cationic dye adsorption. Consequently, 1-8 were used to load Pd nanoparticles to catalyze the reduction of nitrophenols and adsorb and desorb methyl blue (MB). The catalytic reaction efficiencies of Pd@1-8 were higher than that of Pd/C (5 wt %) in the hydrogenation reaction of p-nitrophenol (p-NP). Moreover, Pd@1 exhibited good cycle stability and achieved nearly 100% p-NP conversion after eight cycles. Meanwhile, compound 1 also exhibited a high adsorption ability of MB, possessing an adsorption capacity of 1.41 g·g-1 (second only to 1.49 g·g-1 reported in the literature) selectively over rhodamine B (RhB) and methyl orange (MO) in aqueous solutions. Remarkably, the skeleton of 1 remained stable after four adsorption-desorption cycles of MB in aqueous solution.

Cd-MOF: specific adsorption selectivity for linear alkyne (propyne, 2-butyne and phenylacetylene) molecules.

The selective adsorption of APPT-Cd-MOF 1 for propyne, 2-butyne and phenylacetylene was confirmed by single-crystal analysis. In addition, the selective adsorption performance of Cd-MOF for C3H4/C3H6/C3H8 was investigated. The matching of the functionality and size/shape between porous materials and guest molecules clarified the specific recognition of 1 for linear alkyne molecules.

Interfacial Mo-N-C Bond Endowed Hydrogen Evolution Reaction on MoSe2@N-Doped Carbon Hollow Nanoflowers.

Molybdenum diselenide (MoSe2) has been considered as promising electrocatalysts for catalyzing the hydrogen evolution reaction (HER) due to its narrow band gap and appropriate adsorption free energy. However, its catalytic performance is still impeded by inferior electrical conductivity and insufficient active sites, thus leading to unsatisfactory HER performance. Herein, MoSe2@N-doped carbon (NC) hollow nanoflowers with interfacial Mo-N-C bonds were controllably fabricated through the in situ selenization of the self-polymerized Mo-polydopamine precursor. Benefiting from the unique hollow structure, NC protective layer, and intimate interfacial interaction, the optimal MoSe2@NC displays good HER performance with low overpotentials (175 and 183 mV) and long-term stability (up to 12 h at -10 mA cm-2) in 0.5 M H2SO4 and 1.0 M KOH solutions, respectively. The theoretical results show that Mo-N-C bonds at the interface of MoSe2@NC give rise to relatively low unoccupied eg orbital density of states and ideal H2 adsorption free energy. This work presented here highlights the critical role of interfacial chemical bonds in regulating the electronic structure of nanomaterials and further improving the HER performance.

2D coordination polymer-derived CoSe2-NiSe2/CN nanosheets: the dual-phase synergistic effect and ultrathin structure to enhance the hydrogen evolution reaction.

The evolution of cost-effective hydrogen evolution reaction (HER) electrocatalysts is of great significance for the development of clean energy. Exploring effective synthesis strategies to optimize the performance of non-noble metal electrocatalysts has always attracted our attention. Herein, ultrathin coordination polymers were used as precursors to controllably synthesize two-dimensional (2D) ultrathin dual-phase transition metal selenide (TMSs)/carbon-nitrogen (CN) composites (CoSe2-NiSe2/CN) by a two-step method (first a low temperature hydrothermal method for selenization, and then high temperature calcination selenization). Benefiting from its large specific surface area (49 m2 g-1), abundant catalytically active sites and synergistic effects, CoSe2-NiSe2/CN can significantly enhance the HER catalytic activity and exhibits good electrocatalytic activity with an overpotential of 150 mV at -10 mA cm-2, and a small Tafel slope of 42 mV dec-1 in an acidic electrolyte for the HER. This work provides a new strategy for optimizing the HER catalytic activity of TMSs by preparing 2D ultrathin dual-phase TMS composite materials.

Substoichiometric 3D Covalent Organic Frameworks Based on Hexagonal Linkers.

Covalent organic frameworks (COFs), a fast-growing field in crystalline porous materials, have achieved tremendous success in structure development and application exploration over the past decade. The vast majority of COFs reported to date are designed according to the basic concept of reticular chemistry, which is rooted in the idea that building blocks are fully connected within the frameworks. We demonstrate here that sub-stoichiometric construction of 2D/3D COFs can be accomplished by the condensation of a hexagonal linker with 4-connected building units. It is worth noting that the partially connected frameworks were successfully reticulated for 3D COFs for the first time, representing the highest BET surface area among imine-linked 3D COFs to data. The unreacted benzaldehydes in COF frameworks can enhance C2H2 and CO2 adsorption capacity and selectivities between C2H2/CH4 and C2H2/CO2 for sub-stoichiometric 2D COFs, while the reserved benzaldehydes control the interpenetrated architectures for the 3D case, achieving a rare non-interpenetrated pts topology for 3D COFs. This work not only paves a new avenue to build new COFs and endows residual function groups with further applications but also prompts redetermination of reticular frameworks in highly connected and symmetrical COFs.

One-step Ethylene Purification from an Acetylene/Ethylene/Ethane Ternary Mixture by Cyclopentadiene Cobalt-Functionalized Metal-Organic Frameworks.

The separation of ethylene (C2 H4 ) from a mixture of ethane (C2 H6 ), ethylene (C2 H4 ), and acetylene (C2 H2 ) at normal temperature and pressure is a significant challenge. The sieving effect of pores is powerless due to the similar molecular size and kinetic diameter of these molecules. We report a new modification method based on a stable ftw topological Zr-MOF platform (MOF-525). Introduction of a cyclopentadiene cobalt functional group led to new ftw-type MOFs materials (UPC-612 and UPC-613), which increase the host-guest interaction and achieve efficient ethylene purification from the mixture of hydrocarbon gases. The high performance of UPC-612 and UPC-613 for C2 H2 /C2 H4 /C2 H6 separation has been verified by gas sorption isotherms, density functional theory (DFT), and experimentally determined breakthrough curves. This work provides a one-step separation of the ternary gas mixture and can further serve as a blueprint for the design and construction of function-oriented porous structures for such applications.

Two series of Ln-MOFs by solvent induced self-assembly demonstrating the rapid selective sensing of Mg2+ and Fe3+ cations.

Two series of lanthanide-based metal-organic frameworks, namely {[Ln(BIPA-TC)0.5(DMA)2(NO3)]·DMA·H2O}n (1-Ln, Ln = Eu, Dy, Sm, Nd) and {[Ln2(BIPA-TC)1.5(DMA)3(H2O)2]·2DMA·2H2O}n (2-Ln, Ln = Eu, Dy, Sm, Nd), were successfully constructed via a solvent regulation strategy based on a π-electron rich tetra-carboxylate ligand (H4BIPA-TC). 1-Ln shows a 4-connected lvt topology with the point symbol of {42·84}, but 2-Ln displays a new 4,4,6-connected wxk1 topology with the point symbol of {43·83}4{46·66·83}2{86}. The solid-state luminescence property and the microporous nature of Eu-MOFs (1-Eu and 2-Eu) indicate that they can potentially be used as luminescent sensors. Fluorescence measurements indicate that Fe3+ exhibits the quenching effect for 1-Eu with the quenching efficiency of 93.1%. 2-Eu is the first MOF sensor for Mg2+ with the lowest detection limit of 1.53 × 10-10 mol L-1 and displays good recyclable capability. Simultaneously, in the presence of other metal ions (Ca2+, Mn2+, Co2+, Ni2+, Cu2+, Zn2+, Cd2+, Pd2+, Al3+, Cr3+and Fe3+), 2-Eu can maintain the selective sensing of Mg2+, indicating its potential for Mg2+ turn-on sensing.

Micelles of Mesoporous Silica with Inserted Iron Complexes as a Platform for Constructing Efficient Electrocatalysts for Oxygen Reduction.

Iron, N-codoped carbon materials (Fe-N-C) are promising electrocatalysts toward oxygen reduction reactions due to their high atom utilization efficiency and intrinsic activity. Nanostructuring of the Fe-N-C materials, such as introducing porosity into the carbon structure, would be conducive to further increasing the exposure of active sites as well as improving the mass transfer. Herein, we explore the potential of iron complex-functionalized micelles of mesoporous SiO2 as a platform for constructing porous Fe-N-C materials. The classical three-dimensional MCM-48 was selected as a proof-of-concept example, which was utilized as the hard template, and cetyltrimethylammonium bromide micelles inside it played the role of the main carbon source. Fe-Nx sites were derived from Fe-1,10-phenanthroline complexes in the micelles introduced by in situ incorporation of 1,10-phenanthroline and post Fe2+ insertion in an aqueous solution. After thermal annealing in a nitrogen atmosphere and subsequent removal of the MCM-48 framework, a carbon material that possesses porous structural features with uniformly dispersed Fe-Nx sites (MPC@PhFe) was obtained, which shows superior ORR activity in a 0.1 M KOH solution and great potential for Zn-air battery applications as well. This work demonstrates the feasibility as well as the effectiveness of turning micelles of mesoporous SiO2 into porous carbon structures and might offer a universal strategy for manufacturing carbon materials for future application in energy storage and conversion.

Sequential Solid-State Transformations Involving Consecutive Rearrangements of Secondary Building Units in a Metal-Organic Framework (MOF).

Solid-state transformations in metal-organic frameworks (MOFs) are important and have led to the creation of new MOF structures. Solid-state transformations from interpenetrated to non-interpenetrated networks involving rearrangement of secondary building units (SBUs) in a single-crystal-to-single-crystal (SCSC) fashion have not been explored to date. Herein, we report the sequential, thermally stimulated solid-state transformations in a barium-organic framework (UPC-600). The two-fold interpenetrated framework of UPC-600 is converted at 373 K into UPC-601, a non-interpenetrated framework. This proceeds in a SCSC fashion and involves the rearrangement of two proximate rod-shaped SBUs in different nets to generate a new rod-shaped SBU. At 473 K, a continuous solid-state transformation involving a second rearrangement occurred, UPC-601 converted into UPC-602 by the rearrangement of the 1D rod-shaped SBU to a 2D layer SBU. This is the first example of such a thermally driven stepwise transformation involving simultaneous cleavage and regeneration of multiple bonds.

Accurately Regulating the Electronic Structure of Nix Sey @NC Core-Shell Nanohybrids through Controllable Selenization of a Ni-MOF for pH-Universal Hydrogen Evolution Reaction.

N-doped carbon-encapsulated transition metal selenides (TMSs) have garnered increasing attention as promising electrocatalysts for hydrogen evolution reaction (HER). Accurately regulating the electronic structure of these nanohybrids to reveal the underlying mechanism for enhanced HER performances is still challenging and thus requires deep excavation. Herein, a series of pomegranate-like Nix Sey @NC core-shell nanohybrids (including Ni0.85 Se @ NC, NiSe2 @NC, and NiSe@NC) through controllable selenization of a Ni-MOF precursor is reported. The component of the nanohybrids can be fine-tuned by tailoring the selenization temperature and feed ratio, through which the electronic structure can be synchronously regulated. Among these nanohybrids, the Ni0.85 Se @ NC exhibits the optimum pH-universal HER performance with overpotentials of 131, 135, and 183 mV in 0.5 m H2 SO4 , 1.0 m KOH, and 1.0 m PBS, respectively, at 10 mA cm-2 , which are attributed to the increased partial density of state at the Fermi level and effective van der Waals interactions between Ni0.85 Se and NC matrix explained by density functional theory calculations.

Sequential Solid-State Transformations Involving Consecutive Rearrangements of Secondary Building Units in a Metal-Organic Framework.

Solid-state transformations in metal-organic framework (MOF) systems are important phenomena and have led to the creation of new MOF structures. Solid-state transformations from interpenetrated to non-interpenetrated networks involving rearrangement of secondary building units (SBUs) in a single-crystal-to-single-crystal (SCSC) fashion have not been explored to date. Herein, we report the sequential, thermally stimulated solid-state transformations in a barium-organic framework ( UPC-600 ). The two-fold interpenetrated framework of  UPC-600  is converted at 373 K to UPC-601 , a non-interpenetrated framework. This proceeds in a SCSC fashion and involves the rearrangement of two proximate rod-shaped SBUs in different nets to generate a new rod-shaped SBU. At 473 K, a continuous solid-state transformation involving a second rearrangement occurred,  UPC-601  converted to UPC-602  by the rearrangement of the 1D rod-shaped SBU to a 2D layer SBU. This is the first example of such a thermally-driven stepwise transformation involving simultaneous cleavage and regeneration of multiple bonds. This result will enable detailed studies of solid-state transformations, and encourages a deep understanding of the role of solid-state transformations in the synthesis of MOF materials.