Minimizing Iridium Oxide Electrodes for High Visual Acuity Subretinal Stimulation.

Vision loss from diseases of the outer retina, such as age-related macular degeneration, is among the leading causes of irreversible blindness in the world today. The goal of retinal prosthetics is to replace the photo-sensing function of photoreceptors lost in these diseases with optoelectronic hardware to electrically stimulate patterns of retinal activity corresponding to vision. To enable high-resolution retinal prosthetics, the scale of stimulating electrodes must be significantly decreased from current designs; however, this reduces the amount of stimulating current that can be delivered. The efficacy of subretinal stimulation at electrode sizes suitable for high visual acuity retinal prosthesis are not well understood, particularly within the safe charge injection limits of electrode materials. Here, we measure retinal ganglion cell (RGC) responses in a mouse model of blindness to evaluate the stimulation efficacy of 10, 20, and 30 µm diameter iridium oxide electrodes within the electrode charge injection limits, focusing on measures of charge threshold and dynamic range. Stimulation thresholds were lower for smaller electrodes, but larger electrodes could elicit a greater dynamic range of spikes and recruited more ganglion cells within charge injection limits. These findings suggest a practical lower limit for planar electrode size and indicate strategies for maximizing stimulation thresholds and dynamic range.

Vertically integrated photo junction-field-effect transistor pixels for retinal prosthesis.

Optoelectronic retinal prostheses transduce light into electrical current for neural stimulation. We introduce a novel optoelectronic pixel architecture consisting of a vertically integrated photo junction-field-effect transistor (Photo-JFET) and neural stimulating electrode. Experimental measurements demonstrate that optically addressed Photo-JFET pixels utilize phototransistive gain to produce a broad range of neural stimulation current and can effectively stimulate retinal neurons in vitro. The compact nature of the Photo-JFET pixel can enable high resolution retinal prostheses with the smallest reported optoelectronic pixel size to help restore high visual acuity in patients with degenerative retinal diseases.

Room-temperature long-wave infrared detector with thin double layers of amorphous germanium and amorphous silicon.

A longwave-infrared photodetector made of double layers of 100nm amorphous germanium (a-Ge) and 25nm amorphous silicon (a-Si) have been demonstrated. Under room temperature, the device shows the responsivity of 1.7 A/W, detectivity of 6×108 Jones, and noise equivalent power (NEP) of 5pW/√Hz under 5V bias and at 20kHz operation. Studies of frequency dependent characteristics and device modeling indicate that, above 100Hz or beyond the bandwidth of thermal response, the device operates as a quantum detector having the photoelectrons produced by optical excitation from the bandtail states to the mobile states of a-Ge. The superior device performance may be attributed to the combination of two amplification mechanisms: photoconductive gain in a-Ge and cycling excitation process (CEP) in a-Si, with the latter being the dominant factor. Besides its attractive performance, the device has a simple structure and is easy to fabricate at low cost, thus holding promise for night vision, sensing, autonomous driving, and many other applications.

In Vivo Photovoltaic Performance of a Silicon Nanowire Photodiode-Based Retinal Prosthesis.

Purpose: For more than 20 years, there has been an international, multidisciplinary effort to develop retinal prostheses to restore functional vision to patients blinded by retinal degeneration. We developed a novel subretinal prosthesis with 1512 optically addressed silicon nanowire photodiodes, which transduce incident light into an electrical stimulation of the remaining retinal circuitry. This study was conducted to evaluate the efficacy of optically driving the subretinal prosthesis to produce visual cortex activation via electrical stimulation of the retina. Methods: We measured electrically evoked potential responses (EEPs) in rabbit visual cortex in response to illumination of the subretinal nanowire prosthesis with pulsed 852-nm infrared (IR) light. We compared the EEP responses to visually evoked potential responses (VEPs) to pulsed 532-nm visible light (positive control) and pulsed 852-nm IR light (negative control). Results: Activating the devices with IR light produced EEP responses with a significantly higher trough-to-peak amplitude (54.17 ± 33.4 µV) than IR light alone (24.07 ± 22.1 µV) or background cortical activity (23.22 ± 17.2 µV). EEP latencies were significantly faster than focal VEP latencies. Focal VEPs produced significantly higher amplitudes (94.88 ± 43.3 µV) than EEPs. We also demonstrated how an electrode placed on the cornea can be used as a noninvasive method to monitor the function of the implant. Conclusions: These results show that subretinal electrical stimulation with nanowire electrodes can elicit EEPs in the visual cortex, providing evidence for the viability of a subretinal nanowire prosthetic approach for vision restoration.

Towards high-resolution retinal prostheses with direct optical addressing and inductive telemetry.

OBJECTIVE: Despite considerable advances in retinal prostheses over the last two decades, the resolution of restored vision has remained severely limited, well below the 20/200 acuity threshold of blindness. Towards drastic improvements in spatial resolution, we present a scalable architecture for retinal prostheses in which each stimulation electrode is directly activated by incident light and powered by a common voltage pulse transferred over a single wireless inductive link. APPROACH: The hybrid optical addressability and electronic powering scheme provides separate spatial and temporal control over stimulation, and further provides optoelectronic gain for substantially lower light intensity thresholds than other optically addressed retinal prostheses using passive microphotodiode arrays. The architecture permits the use of high-density electrode arrays with ultra-high photosensitive silicon nanowires, obviating the need for excessive wiring and high-throughput data telemetry. Instead, the single inductive link drives the entire array of electrodes through two wires and provides external control over waveform parameters for common voltage stimulation. MAIN RESULTS: A complete system comprising inductive telemetry link, stimulation pulse demodulator, charge-balancing series capacitor, and nanowire-based electrode device is integrated and validated ex vivo on rat retina tissue. SIGNIFICANCE: Measurements demonstrate control over retinal neural activity both by light and electrical bias, validating the feasibility of the proposed architecture and its system components as an important first step towards a high-resolution optically addressed retinal prosthesis.