A Comparison of Skeletal Muscle Diffusion Tensor Imaging Tractography Seeding Methods.

The internal arrangement of a muscle's fibers with respect to its mechanical line of action (muscle architecture) is a major determinant of muscle function. Muscle architecture can be quantified using diffusion tensor magnetic resonance imaging-based tractography, which propagates streamlines from a set of seed points by integrating vectors that represent the direction of greatest water diffusion (and by inference, the local fiber orientation). Previous work has demonstrated that tractography outcomes are sensitive to the method for defining seed points, but this sensitivity has not been fully examined. To do so, we developed a realistic simulated muscle architecture and implemented four novel methods for tract seeding: seeding along the muscle-aponeurosis boundary with an updated procedure for rounding seed points prior to lookup in the muscle boundary mask and diffusion tensor matrix (APO-3); voxel-based seeding throughout the muscle volume at a user-specified spatial frequency (VXL-1); voxel-based seeding throughout the muscle volume at a variable spatial frequency (VXL-2), and seeding near external and internal muscle boundaries (VXL-3). We then implemented these methods in an example human dataset. The updated aponeurosis seeding procedures allow more accurate and robust tract propagation from seed points. The voxel-based seeding methods had quantification outcomes that closely matched the updated aponeurosis seeding method. Further, the voxel-based methods can accelerate the overall workflow and may be beneficial in high throughput analysis of multi-muscle datasets. Continued evaluation of these methods in a wider range of muscle architectures is warranted.

The impact of diffusion tensor imaging tractography settings on muscle fascicle architecture and diffusion parameter estimates: Tract length, completion, and curvature are most sensitive to tractography settings.

Diffusion-tensor (DT)-MRI tractography provides information about properties relevant to muscle health and function, including estimates of architectural properties such as fascicle length, pennation angle, and curvature and diffusion properties such as mean diffusivity (MD) and fractional anisotropy (FA). Tractography settings, including integration algorithms, thresholds for early tract termination, and tract smoothing approaches, impact the accuracy of the muscle property estimates. However, muscle DT-MRI tractography is performed using a variety of these settings, complicating comparisons between different studies. The effects of different tractography settings on muscle architecture estimates have not been fully explored, and optimized settings for muscle tractography have not yet been determined. We examined the influence of integration algorithm and termination check settings combined with a range of step sizes, termination criteria, and smoothing polynomial orders on tract characteristics, completion/reason for termination, and goodness of fit between fiber tracts and smoothing polynomials using 3-T DT-MR images of the lower leg muscles of seven healthy adults. We found that tract length and completion were highly sensitive to strict FA and intersegment angle thresholds (25%-69% reduction in complete fiber tracts from lowest to highest minimum FA threshold and 11%-36% reduction from highest to lowest intersegment angle threshold). Higher order polynomials (third and fourth order vs. second order) better fit the muscle fiber trajectories, but curvature estimates were highly sensitive to smoothing polynomial order (3.9-6.6 m-1 increase for second- vs. fourth-order fitting polynomials). Step size impacted curvature estimates, albeit to a lesser degree. Integration algorithm had little impact, and mean pennation angle, and tract-based FA and MD, were relatively insensitive to all parameters. The results demonstrate which muscle diffusion measures and architectural estimates are most sensitive to varying tractography settings and support the need for consistent reporting of tractography details to aid interpretation and comparison of results between studies.

A registration strategy to characterize DTI-observed changes in skeletal muscle architecture due to passive shortening.

Skeletal muscle architecture is a key determinant of muscle function. Architectural properties such as fascicle length, pennation angle, and curvature can be characterized using Diffusion Tensor Imaging (DTI), but acquiring these data during a contraction is not currently feasible. However, an image registration-based strategy may be able to convert muscle architectural properties observed at rest to their contracted state. As an initial step toward this long-term objective, the aim of this study was to determine if an image registration strategy could be used to convert the whole-muscle average architectural properties observed in the extended joint position to those of a flexed position, following passive rotation. DTI and high-resolution fat/water scans were acquired in the lower leg of seven healthy participants on a 3T MR system in +20° (plantarflexion) and -10° (dorsiflexion) foot positions. The diffusion and anatomical images from the two positions were used to propagate DTI fiber-tracts from seed points along a mesh representation of the aponeurosis of fiber insertion. The -10° and +20° anatomical images were registered and the displacement fields were used to transform the mesh and fiber-tracts from the +20° to the -10° position. Student's paired t-tests were used to compare the mean architectural parameters between the original and transformed fiber-tracts. The whole-muscle average fiber-tract length, pennation angle, curvature, and physiological cross-sectional areas estimates did not differ significantly. DTI fiber-tracts in plantarflexion can be transformed to dorsiflexion position without significantly affecting the average architectural characteristics of the fiber-tracts. In the future, a similar approach could be used to evaluate muscle architecture in a contracted state.

Predicted effects of image acquisition and analysis conditions on DTMRI tractography-based muscle architecture estimates.

PURPOSE: To quantify the effects of the intrinsic signal pattern, image acquisition conditions, and data analysis conditions on diffusion-tensor MRI (DTMRI) tractography-based muscle architecture estimates using a sampling-reconstruction assessment framework. METHODS: Numerical models of muscles were constructed with realistic architectural properties. DTMRI signals were computed at signal-to-noise ratio (SNR) of 24-96 and common voxel sizes. Fiber tracking was performed, and the results were compared with the known architectural properties. RESULTS: SNR exerted the most significant impact on the outcome. The outcome variables approached asymptotes at SNR ≈ 54. Large in-plane voxel dimensions reduced the similarity between reconstructed fibers and the known architectural properties. Higher order polynomials helped reconstruct fibers with more complicated geometry but overfit noise for less complex geometries. The intrinsic fiber curvature also affected the robustness of polynomial smoothing to SNR. Other conditions, such as the fiber dimensionality, voxel aspect ratio, and slice thickness, did not affect the outcomes. CONCLUSION: SNR ≥ 54 is recommended for accurate muscle architecture characterization using DTMRI. Averaged across all simulated conditions, the greatest percent errors under SNR = 54 were -5.6% and -4.0% for the pennation angle and fiber-tract length estimates, respectively. For fiber tracts with intermediate intrinsic curvature, the greatest percent error for the curvature estimate was 9.8% for SNR = 54. Smaller in-plane voxel size (≤1.5 mm) is preferred to minimize the estimation error in architectural properties. If necessary, slice thickness may be adjusted within typical ranges to achieve sufficient SNR when slices are aligned near the fiber direction. Third-order polynomial fitting is appropriate for smoothing fiber tracts.

Feasibility of joint mapping of triglyceride saturation and water longitudinal relaxation in a single breath hold applied to high fat-fraction adipose depots in the periclavicular anatomy.

INTRODUCTION: Simultaneous mapping of triglyceride (TAG) saturation and tissue water relaxation may improve the characterization of the structure and function of anatomies with significant adipose tissue. While several groups have demonstrated in vivo TAG saturation imaging using MRI, joint mapping of relaxation and TAG saturation is understudied. Such mappings may avoid bias from physiological motion, if they can be done within a single breath-hold, and also account for static and applied magnetic field heterogeneity. METHODS: We propose a transient-state/MR fingerprinting single breath-hold sequence at 3 T, a low-rank reconstruction, and a parameter estimation pipeline that jointly estimates the number of double bonds (NDB), number of methylene interrupted double bonds (NMIDB), and tissue water T1, while accounting for non-ideal radiofrequency transmit scaling and off-resonance effects. We test the proposed method in simulations, in phantom against MR spectroscopy (MRS), and in vivo regions in and around high fat fraction (FF) periclavicular adipose tissue. Partial volume and multi-peak transverse relaxation effects are explored. RESULTS: The simulation results demonstrate accurate NDB, NMIDB, and water T1 estimates across a range of NDB, NMIDB, and T1 values. In phantoms, the proposed method's estimates of NDB and NMIDB correlate with those from MR spectroscopy (Pearson correlation ≥0.98), while the water T1 estimates are concordant with a standard phantom. The NDB and NMIDB are sensitive to partial volumes of water, showing increasing bias at FF < 40%. This bias is found to be due to noise and transverse relaxation effects. The in vivo periclavicular adipose tissue has high FF (>90%). The adipose tissue NDB and NMIDB, and muscle T1 estimates are comparable to those reported in the literature. CONCLUSION: Robust estimation of NDB, NMIDB at high FF and water T1 across a broad range of FFs are feasible using the proposed methods. Further reduction of noise and model bias are needed to employ the proposed technique in low FF anatomies and pathologies.

Leveraging cardiac magnetic resonance imaging to assess skeletal muscle progression in Duchenne muscular dystrophy.

Duchenne muscular dystrophy (DMD) is characterized by muscle deterioration and progressive weakness. As a result, patients with DMD have significant cardiopulmonary morbidity and mortality that worsens with age and loss of ambulation. Since most validated muscle assessments require ambulation, new functional measures of DMD progression are needed. Despite several evaluation methods available for monitoring disease progression, the relationship between these measures is unknown. We sought to assess the correlation between imaging metrics obtained from cardiac magnetic resonance imaging (CMR) and functional assessments including quantitative muscle testing (QMT), spirometry, and accelerometry. Forty-nine patients with DMD were enrolled and underwent CMR, accelerometry and QMT at baseline, 1-year and 2-year clinic visits with temporally associated pulmonary function testing obtained from the medical record. Imaging of the upper extremity musculature (triceps and biceps) demonstrated the most robust correlations with accelerometry (p<0.03), QMT (p<0.02) and spirometry (p<0.01). T1-mapping of serratus anterior muscle showed a similar, but slightly weaker relationship with accelerometry and QMT. T2-mapping of serratus anterior demonstrated weak indirect correlation with aspects of accelerometry. These images are either routinely obtained in standard CMR or can be added to a protocol and may allow for a more comprehensive assessment of a patient's disease progression.

A MATLAB toolbox for muscle diffusion-tensor MRI tractography.

Diffusion-tensor MRI fiber tractography has been used to reconstruct skeletal muscle architecture, but remains a specialized technique using custom-written data processing routines. In this work, we describe the public release of a software toolbox having the following design objectives: accomplish the pre-processing tasks of file input, image registration, denoising, and diffusion-tensor calculation; allow muscle-specific methods for defining seed points; make fiber-tract architectural measurements referenced to tendinous structures; visualize fiber tracts and other muscle structures of interest; analyze the goodness of outcomes; and provide a programming structure that allows the addition of new capabilities in future versions. The proper function of the code was verified using simulated datasets. The toolbox capabilities for characterizing human muscle structure in vivo were demonstrated in a case study. These capabilities included measurements of muscle morphology; contractile and non-contractile tissue volumes; fiber-tract length, pennation angle, curvature; and the physiological cross-sectional area,. The free public release of this software is a first step in creating of a community of users who use these tools in studies of muscle physiology and biomechanics. Users may further contribute to code development. Along with simulated and actual datasets for benchmarking, these tools will further create mechanisms for enhancing scientific rigor and developing and validating new code features. Planned future developments include additional options for image pre-processing, development of a graphical user interface, analysis of architectural patterns during muscle contraction, and integration of functional imaging data.

Slice-selective extended phase graphs in gradient-crushed, transient-state free precession sequences: An application to MR fingerprinting.

PURPOSE: Slice-selective, gradient-crushed, transient-state sequences such as those used in MR fingerprinting (MRF) relaxometry are sensitive to slice profile effects. Whereas balanced steady-state free precession MRF profile effects have been studied, less attention has been given to gradient-crushed MRF forms. Extensions of the extended phase graph (EPG) formalism, called slice-selective EPG (ssEPG), are proposed that model slice profile effects. THEORY AND METHODS: The hard-pulse approximation to slice-selective excitation in the spatial domain is reformulated in k-space. Excitation is modeled by standard EPG shift and transition operators. This ssEPG modeling is validated against Bloch simulations and phantom slice profile measurements. ssEPG relaxometry accuracy and variability are compared with other EPG methods in phantoms and human leg in vivo. The role of ∆B0 interactions with slice profile and gradient crushers is investigated. RESULTS: Simulations and slice profile measurements show that ssEPG can model highly dynamic slice profile effects of gradient-crushed sequences. The MRF ssEPG T2 estimates over 0 < T2 < 100 ms improve accuracy by > 10 ms at some values relative to other modeling approaches. Small deviations in B0 can produce substantial bias in T2 estimations from a range of MRF sequence types, and these effects can be modeled and understood by ssEPG. CONCLUSION: Transient-state, gradient-crushed sequences such as those used in MRF are sensitive to slice profile effects, and these effects depend on RF pulse choice, gradient crusher strength, and ∆B0 . It was found ssEPG was the most accurate EPG-based means to model these effects.

Beyond ambulation: Measuring physical activity in youth with Duchenne muscular dystrophy.

Patients with Duchenne muscular dystrophy (DMD) develop skeletal muscle weakness and cardiomyopathy. Validated skeletal muscle outcome measures are limited to ambulatory patients, but most DMD patients in cardiac trials are non-ambulatory. New objective functional assessments are needed. This study's objective was to assess the correlation and longitudinal change of two measures: quantitative muscle testing (QMT) and accelerometry. Patients with DMD were prospectively enrolled and underwent QMT and wore wrist and ankle accelerometers for seven days at baseline, 1-, and 2-years. QMT measures were indexed to age. Accelerometer recordings were total vector magnitudes and awake vector magnitude. Correlations were assessed using a Spearman correlation, and longitudinal change was evaluated using a paired t-test or a Wilcoxon signed rank test. Forty-eight participants were included. QMT and accelerometry measures had a moderate or strong correlation, particularly indexed arm QMT with total wrist vector magnitude (rho=0.85, p<0.001), total indexed QMT with total wrist vector magnitude (rho=0.8, p<0.001) and indexed leg QMT with total ankle vector magnitude (rho=0.69, p<0.001). QMT and accelerometry measures declined significantly over time. Accelerometry correlates with QMT and indexed QMT in boys with DMD. A combination of QMT and accelerometry may provide a complementary assessment of skeletal muscle function in non-ambulatory boys with DMD.

Cold exposure induces dynamic, heterogeneous alterations in human brown adipose tissue lipid content.

Brown adipose tissue undergoes a dynamic, heterogeneous response to cold exposure that can include the simultaneous synthesis, uptake, and oxidation of fatty acids. The purpose of this work was to quantify these changes in brown adipose tissue lipid content (fat-signal fraction (FSF)) using fat-water magnetic resonance imaging during individualized cooling to 3 °C above a participant's shiver threshold. Eight healthy men completed familiarization, perception-based cooling, and MRI-cooling visits. FSF maps of the supraclavicular region were acquired in thermoneutrality and during cooling (59.5 ± 6.5 min). Brown adipose tissue regions of interest were defined, and voxels were grouped into FSF decades (0-10%, 10-20%…90-100%) according to their initial value. Brown adipose tissue contained a heterogeneous morphology of lipid content. Voxels with initial FSF values of 60-100% (P < 0.05) exhibited a significant decrease in FSF while a simultaneous increase in FSF occurred in voxels with initial FSF values of 0-30% (P < 0.05). These data suggest that in healthy young men, cold exposure elicits a dynamic and heterogeneous response in brown adipose tissue, with areas initially rich with lipid undergoing net lipid loss and areas of low initial lipid undergoing a net lipid accumulation.

MR fingerprinting with simultaneous T1, T2, and fat signal fraction estimation with integrated B0 correction reduces bias in water T1 and T2 estimates.

PURPOSE: MR fingerprinting (MRF) sequences permit efficient T1 and T2 estimation in cranial and extracranial regions, but these areas may include substantial fat signals that bias T1 and T2 estimates. MRI fat signal fraction estimation is also a topic of active research in itself, but may be complicated by B0 heterogeneity and blurring during spiral k-space acquisitions, which are commonly used for MRF. An MRF method is proposed that separates fat and water signals, estimates water T1 and T2, and accounts for B0 effects with spiral blurring correction, in a single sequence. THEORY AND METHODS: A k-space-based fat-water separation method is further extended to unbalanced steady-state free precession MRF with swept echo time. Repeated application of this k-space fat-water separation to demodulated forms of the measured data allows a B0 map and correction to be approximated. The method is compared with MRF without fat separation across a broad range of fat signal fractions (FSFs), water T1s and T2s, and under heterogeneous static fields in simulations, phantoms, and in vivo. RESULTS: The proposed method's FSF estimates had a concordance correlation coefficient of 0.990 with conventional measurements, and reduced biases in the T1 and T2 estimates due to fat signal relative to other MRF sequences by several hundred ms. The B0 correction improved the FSF, T1, and T2 estimation compared to those estimates without correction. CONCLUSION: The proposed method improves MRF water T1 and T2 estimation in the presence of fat and provides accurate FSF estimation with inline B0 correction.

Fat-Water Phantoms for Magnetic Resonance Imaging Validation: A Flexible and Scalable Protocol.

As new techniques are developed to image adipose tissue, methods to validate such protocols are becoming increasingly important. Phantoms, experimental replicas of a tissue or organ of interest, provide a low cost, flexible solution. However, without access to expensive and specialized equipment, constructing stable phantoms with high fat fractions (e.g., >50% fat fraction levels such as those seen in brown adipose tissue) can be difficult due to the hydrophobic nature of lipids. This work presents a detailed, low cost protocol for creating 5x 100 mL phantoms with fat fractions of 0%, 25%, 50%, 75%, and 100% using basic lab supplies (hotplate, beakers, etc.) and easily accessible components (distilled water, agar, water-soluble surfactant, sodium benzoate, gadolinium-diethylenetriaminepentacetate (DTPA) contrast agent, peanut oil, and oil-soluble surfactant). The protocol was designed to be flexible; it can be used to create phantoms with different fat fractions and a wide range of volumes. Phantoms created with this technique were evaluated in the feasibility study that compared the fat fraction values from fat-water magnetic resonance imaging to the target values in the constructed phantoms. This study yielded a concordance correlation coefficient of 0.998 (95% confidence interval: 0.972-1.00). In summary, these studies demonstrate the utility of fat phantoms for validating adipose tissue imaging techniques across a range of clinically relevant tissues and organs.

Skeletal muscle diffusion tensor-MRI fiber tracking: rationale, data acquisition and analysis methods, applications and future directions.

The mechanical functions of muscles involve the generation of force and the actuation of movement by shortening or lengthening under load. These functions are influenced, in part, by the internal arrangement of muscle fibers with respect to the muscle's mechanical line of action. This property is known as muscle architecture. In this review, we describe the use of diffusion tensor (DT)-MRI muscle fiber tracking for the study of muscle architecture. In the first section, the importance of skeletal muscle architecture to function is discussed. In addition, traditional and complementary methods for the assessment of muscle architecture (brightness-mode ultrasound imaging and cadaver analysis) are presented. Next, DT-MRI is introduced and the structural basis for the reduced and anisotropic diffusion of water in muscle is discussed. The third section discusses issues related to the acquisition of skeletal muscle DT-MRI data and presents recommendations for optimal strategies. The fourth section discusses methods for the pre-processing of DT-MRI data, the available approaches for the calculation of the diffusion tensor and the seeding and propagating of fiber tracts, and the analysis of the tracking results to measure structural properties pertinent to muscle biomechanics. Lastly, examples are presented of how DT-MRI fiber tracking has been used to provide new insights into how muscles function, and important future research directions are highlighted. Copyright © 2016 John Wiley & Sons, Ltd.

Increased Number of Circulating CD8/CD26 T Cells in the Blood of Duchenne Muscular Dystrophy Patients Is Associated with Augmented Binding of Adenosine Deaminase and Higher Muscular Strength Scores.

Duchenne muscular dystrophy (DMD) is an X-linked disorder that leads to cardiac and skeletal myopathy. The complex immune activation in boys with DMD is incompletely understood. To better understand the contribution of the immune system into the progression of DMD, we performed a systematic characterization of immune cell subpopulations obtained from peripheral blood of DMD subjects and control donors. We found that the number of CD8 cells expressing CD26 (also known as adenosine deaminase complexing protein 2) was increased in DMD subjects compared to control. No differences, however, were found in the levels of circulating factors associated with pro-inflammatory activation of CD8/CD26 cells, such as tumor necrosis factor-α (TNFα), granzyme B, and interferon-γ (IFNγ). The number of CD8/CD26 cells correlated directly with quantitative muscle testing (QMT) in DMD subjects. Since CD26 mediates binding of adenosine deaminase (ADA) to the T cell surface, we tested ADA-binding capacity of CD8/CD26 cells and the activity of bound ADA. We found that mononuclear cells (MNC) obtained from DMD subjects with an increased number of CD8/CD26 T cells had a greater capacity to bind ADA. In addition, these MNC demonstrated increased hydrolytic deamination of adenosine to inosine. Altogether, our data demonstrated that (1) an increased number of circulating CD8/CD26 T cells is associated with preservation of muscle strength in DMD subjects, and (2) CD8/CD26 T cells from DMD subjects mediated degradation of adenosine by adenosine deaminase. These results support a role for T cells in slowing the decline in skeletal muscle function, and a need for further investigation into contribution of CD8/CD26 T cells in the regulation of chronic inflammation associated with DMD.

Post-contractile BOLD contrast in skeletal muscle at 7 T reveals inter-individual heterogeneity in the physiological responses to muscle contraction.

Muscle blood oxygenation-level dependent (BOLD) contrast is greater in magnitude and potentially more influenced by extravascular BOLD mechanisms at 7 T than it is at lower field strengths. Muscle BOLD imaging of muscle contractions at 7 T could, therefore, provide greater or different contrast than at 3 T. The purpose of this study was to evaluate the feasibility of using BOLD imaging at 7 T to assess the physiological responses to in vivo muscle contractions. Thirteen subjects (four females) performed a series of isometric contractions of the calf muscles while being scanned in a Philips Achieva 7 T human imager. Following 2 s maximal isometric plantarflexion contractions, BOLD signal transients ranging from 0.3 to 7.0% of the pre-contraction signal intensity were observed in the soleus muscle. We observed considerable inter-subject variability in both the magnitude and time course of the muscle BOLD signal. A subset of subjects (n = 7) repeated the contraction protocol at two different repetition times (TR : 1000 and 2500 ms) to determine the potential of T1 -related inflow effects on the magnitude of the post-contractile BOLD response. Consistent with previous reports, there was no difference in the magnitude of the responses for the two TR values (3.8 ± 0.9 versus 4.0 ± 0.6% for TR  = 1000 and 2500 ms, respectively; mean ± standard error). These results demonstrate that studies of the muscle BOLD responses to contractions are feasible at 7 T. Compared with studies at lower field strengths, post-contractile 7 T muscle BOLD contrast may afford greater insight into microvascular function and dysfunction.

FloWave.US: validated, open-source, and flexible software for ultrasound blood flow analysis.

Automated software improves the accuracy and reliability of blood velocity, vessel diameter, blood flow, and shear rate ultrasound measurements, but existing software offers limited flexibility to customize and validate analyses. We developed FloWave.US-open-source software to automate ultrasound blood flow analysis-and demonstrated the validity of its blood velocity (aggregate relative error, 4.32%) and vessel diameter (0.31%) measures with a skeletal muscle ultrasound flow phantom. Compared with a commercial, manual analysis software program, FloWave.US produced equivalent in vivo cardiac cycle time-averaged mean (TAMean) velocities at rest and following a 10-s muscle contraction (mean bias <1 pixel for both conditions). Automated analysis of ultrasound blood flow data was 9.8 times faster than the manual method. Finally, a case study of a lower extremity muscle contraction experiment highlighted the ability of FloWave.US to measure small fluctuations in TAMean velocity, vessel diameter, and mean blood flow at specific time points in the cardiac cycle. In summary, the collective features of our newly designed software-accuracy, reliability, reduced processing time, cost-effectiveness, and flexibility-offer advantages over existing proprietary options. Further, public distribution of FloWave.US allows researchers to easily access and customize code to adapt ultrasound blood flow analysis to a variety of vascular physiology applications.

Magnetic resonance imaging of skeletal muscle disease.

Neuromuscular diseases often exhibit a temporally varying, spatially heterogeneous, and multifaceted pathology. The goals of this chapter are to describe and evaluate the use of quantitative magnetic resonance imaging (MRI) methods to characterize muscle pathology. The following criteria are used for this evaluation: objective measurement of continuously distributed variables; clear and well-understood relationship to the pathology of interest; sensitivity to improvement or worsening of clinical status; and the measurement properties of accuracy and precision. Two major classes of MRI methods meet all of these criteria: (1) MRI methods for measuring muscle contractile volume or cross-sectional area by combining structural MRI and quantitative fat-water MRI; and (2) an MRI method for characterizing the edema caused by inflammation, the measurement of the transverse relaxation time constant (T2). These methods are evaluated with respect to the four criteria listed above and examples from neuromuscular disorders are provided. Finally, these methods are summarized and synthesized and recommendations for additional quantitative MRI developments are made.

Increased myocardial native T1 and extracellular volume in patients with Duchenne muscular dystrophy.

BACKGROUND: Duchenne muscular dystrophy (DMD) cardiomyopathy is a progressive disease for which there is no cure. Disease-specific therapies are needed that can be initiated before irreversible myocardial damage ensues. In order to evaluate therapeutic efficacy, surrogate endpoints other than ejection fraction must be found. The hypothesis of this study is that T1 and extracellular volume fraction (ECV) mapping using cardiovascular magnetic resonance (CMR) can detect diffuse extracellular matrix expansion in DMD patients with normal left ventricular ejection fraction (LVEF) and without myocardial late gadolinium enhancement (LGE). METHODS: Thirty-one DMD and 11 healthy control participants were prospectively enrolled. CMR using a modified Look-Locker (MOLLI) sequence was performed in all participants before and after contrast administration. T1 and ECV maps of the mid left ventricular myocardium were generated and regions of interest were contoured using the standard 6-segment AHA model. Global and segmental values were compared between DMD and controls using a Wilcoxon rank-sum test. RESULTS: The DMD participants had significantly higher mean native T1 compared with controls (1045 ms vs. 988 ms, p = 0.001). DMD participants with normal LVEF and without evidence of LGE also demonstrated elevated mean native T1 (1039 ms vs. 988 ms, p = 0.002, and 1038 ms vs. 988 ms, p = 0.011). DMD participants had a significantly greater mean ECV than controls (0.31 vs. 0.24, p < 0.001), even in the settings of normal LVEF (0.28 vs. 0.24, p < 0.001) and negative LGE (0.29 vs. 0.24, p = 0.001). CONCLUSIONS: DMD participants have elevated LV myocardial native T1 and ECV, even in the setting of normal LVEF and in the absence of LGE. T1 and ECV mapping in DMD have potential to serve as surrogate cardiomyopathy outcome measures for clinical trials.

Quantitative Magnetic Resonance Imaging of Skeletal Muscle Disease.

Quantitative magnetic resonance imaging (qMRI) describes the development and use of MRI to quantify physical, chemical, and/or biological properties of living systems. Neuromuscular diseases often exhibit a temporally varying, spatially heterogeneous, and multi-faceted pathology. The goal of this protocol is to characterize this pathology using qMRI methods. The MRI acquisition protocol begins with localizer images (used to locate the position of the body and tissue of interest within the MRI system), quality control measurements of relevant magnetic field distributions, and structural imaging for general anatomical characterization. The qMRI portion of the protocol includes measurements of the longitudinal and transverse relaxation time constants (T1 and T2, respectively). Also acquired are diffusion-tensor MRI data, in which water diffusivity is measured and used to infer pathological processes such as edema. Quantitative magnetization transfer imaging is used to characterize the relative tissue content of macromolecular and free water protons. Lastly, fat-water MRI methods are used to characterize fibro-adipose tissue replacement of muscle. In addition to describing the data acquisition and analysis procedures, this paper also discusses the potential problems associated with these methods, the analysis and interpretation of the data, MRI safety, and strategies for artifact reduction and protocol optimization.