RESUMEN
Food safety has emerged as a paramount concern for both Vietnamese consumers and the government. However, limited data are available on food safety management systems in Viet Nam. This study identified significant gaps in good agricultural and hygienic practices along the fresh produce chain (farmers and traditional wholesalers/market sellers) in the region of Da Nang, Viet Nam. This was achieved through a survey on good agricultural and hygienic practices for farmers (n = 100) and sellers (n = 100), which researchers further supplemented by microbiological analysis for E. coli, Salmonella spp., and Listeria monocytogenes on leafy greens, water in contact with produce and contact surfaces (hands). The results indicated that 86.0 % of farmers and 54.0 % of sellers received food safety training in the last 3 years; and women dominated both vegetable cultivation but also trading. Farm-level deficiencies included inadequate handwashing practices, lack of documentation for manure application schedules, improper washing and drying of harvest tools, failure to keep containers elevated off the ground, improper storage of vegetables, and inadequate covering of containers, with respectively 34.0 %, 30.3 %, 12.1 %, 41.7 % and 7.9 % of farmers executing the practice as prescribed by the WHO/FAO '5 keys of growing safer fruits and vegetables'. As for sellers, the most dominant gaps (<50.0 % compliance) were the way of handwashing and the practice of keeping containers elevated off the ground before, during, and after harvesting. The microbiological analysis confirmed that, in a total of 36 fresh produce samples including mustard greens, cucumber, lettuce, and crown daisy, the number of samples positive for E. coli, Salmonella spp., and L. monocytogenes were 12, 2, and 10 respectively. Samples of hands and the irrigation water showed high contamination with E. coli. Based on identified gaps, risk communication tools were developed and distributed amongst farmers, sellers, and Da Nang food safety management authority (governmental organisation performing inspections in the traditional food markets). As intervention, two farmers and two sellers were trained in safe agricultural practices for the cultivation of fresh vegetables (managerial intervention) and instructed to use tap water as irrigation water instead of uncontrolled surface water (technological intervention). A post-assessment was conducted, including redoing the survey on good practices and microbiological analysis. The outcome of these interventions showed positive results in terms of good agricultural and hygienic practices resulting in improved hygiene levels and safety of the fresh produce. The findings from this research have the potential to provide a model for the development of a science-based risk management strategy in alternative food chains or geographic areas in emerging countries.
RESUMEN
The performance and lifespan of cutting tools are significantly influenced by their surface quality. The present report highlights recent advances in enhancing the surface characteristics of tungsten carbide and high-speed steel cutting tools using a novel micro-machining technique for polishing and edge-honing. Notably, the main aim was to reduce the surface roughness while maintaining the hardness of the materials at an optimal level. By conducting a thorough analysis of surfaces obtained using different techniques, it was found that the micro-machining method effectively decreased the surface roughness of the cutting tools the most effectively out of the techniques investigated. Significantly, the surface roughness was reduced from an initial measurement of 400 nm to an impressive value of 60 nm. No significant change in hardness was observed, which guarantees the maintenance of the mechanical properties of the cutting tools. This analysis enhances the comprehension of surface enhancement methodologies for cutting tools through the presentation of these findings. The observed decrease in surface roughness, along with the consistent hardness, exhibits potential for improving tool performance. These enhancements possess the capacity to optimise manufacturing processes, increase tool reliability, and minimise waste generation.
RESUMEN
We herein present an alternative geometry of nanostructured carbon cathode capable of obtaining a low turn-on field, and both stable and high current densities. This cathode geometry consisted of a micro-hollow array on planar carbon nanostructures engineered by femtosecond laser. The micro-hollow geometry provides a larger edge area for achieving a lower turn-on field of 0.70 V/µm, a sustainable current of approximately 2 mA (about 112 mA/cm2) at an applied field of less than 2 V/µm. The electric field in the vicinity of the hollow array (rim edge) is enhanced due to the edge effect, that is key to improving field emission performance. The edge effect of the micro-hollow cathode is confirmed by numerical calculation. This new type of nanostructured carbon cathode geometry can be promisingly applied for high intensity and compact electron sources.
RESUMEN
In this work, a feasible one-pot approach to synthesize manganese oxide/graphene composites, the so-called plasma-enhanced electrochemical exfoliation process (PE3P), has been developed. Herein, a composite of graphene decorated with manganese oxide nanoparticles was prepared via PE3P from a KMnO4 solution and graphite electrode under a voltage of 70 V in an ambient environment. By controlling the initial KMnO4 concentration, we obtained distinct MnO2/graphene samples. The prepared samples were characterized by scanning electron microscopy, transmission electron microscopy, x-ray diffraction, x-ray photoelectron spectroscopy, and Raman spectroscopy. The electrochemical measurements of the MnO2/graphene composites revealed that the specific capacitance of the samples is approximately 320 F g-1 at a scan rate of 10 mV s-1, which is comparably very high for manganese oxide/carbon-based supercapacitor electrode materials. Considering the simple, low-cost, one-step and environmentally friendly preparation, our approach has the potential to be used for the fabrication of MnO2/graphene composites as the electrode materials of supercapacitors.
