A Color Indicator Based on 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium Bromide (MTT) and a Biodegradable Poly(ester amide) for Detecting Bacterial Contamination.

Bacterial contamination is a hazard in many industries, including food, pharmaceuticals, and healthcare. The availability of a rapid and simple method for detecting this type of contamination in sterile areas enables immediate intervention to avoid or reduce detrimental effects. Among these methods, colorimetric indicators are becoming increasingly popular due to their affordability, ease of use, and quick visual interpretation of the signal. In this article, a bacterial contamination indicator system was designed by incorporating MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) into an electrospun PADAS matrix, which is a biodegradable poly(ester amide) synthesized from L-alanine, 1,12-dodecanediol, and sebacic acid. Uniaxial stress testing, thermogravimetric analysis and scanning electron microscopy were used to examine the mechanical properties, thermal stability, and morphology of the mats, respectively. The capacity for bacterial detection was not only analyzed with agar and broth assays but also by replicating important environmental conditions. Among the MTT concentrations tested in this study (0.2%, 2%, and 5%), it was found that only with a 2% MTT content the designed system produced a color response visible to the naked eye with optimal intensity, a sensitivity limit of 104 CFU/mL, and 86% cell viability, which showed the great potential for its use to detect bacterial contamination. In summary, by means of the process described in this work, it was possible to obtain a simple, low-cost and fast-response bacterial contamination indicator that can be used in mask filters, air filters, or protective clothing.

Lanthanides-Substituted Hydroxyapatite for Biomedical Applications.

Lately, there has been an increasing demand for materials that could improve tissue regenerative therapies and provide antimicrobial effects. Similarly, there is a growing need to develop or modify biomaterials for the diagnosis and treatment of different pathologies. In this scenario, hydroxyapatite (HAp) appears as a bioceramic with extended functionalities. Nevertheless, there are certain disadvantages related to the mechanical properties and lack of antimicrobial capacity. To circumvent them, the doping of HAp with a variety of cationic ions is emerging as a good alterative due to the different biological roles of each ion. Among many elements, lanthanides are understudied despite their great potential in the biomedical field. For this reason, the present review focuses on the biological benefits of lanthanides and how their incorporation into HAp can alter its morphology and physical properties. A comprehensive section of the applications of lanthanides-substituted HAp nanoparticles (HAp NPs) is presented to unveil the potential biomedical uses of these systems. Finally, the need to study the tolerable and non-toxic percentages of substitution with these elements is highlighted.

Multifunctional Scaffolds Based on Emulsion and Coaxial Electrospinning Incorporation of Hydroxyapatite for Bone Tissue Regeneration.

Tissue engineering is nowadays a powerful tool to restore damaged tissues and recover their normal functionality. Advantages over other current methods are well established, although a continuous evolution is still necessary to improve the final performance and the range of applications. Trends are nowadays focused on the development of multifunctional scaffolds with hierarchical structures and the capability to render a sustained delivery of bioactive molecules under an appropriate stimulus. Nanocomposites incorporating hydroxyapatite nanoparticles (HAp NPs) have a predominant role in bone tissue regeneration due to their high capacity to enhance osteoinduction, osteoconduction, and osteointegration, as well as their encapsulation efficiency and protection capability of bioactive agents. Selection of appropriated polymeric matrices is fundamental and consequently great efforts have been invested to increase the range of properties of available materials through copolymerization, blending, or combining structures constituted by different materials. Scaffolds can be obtained from different processes that differ in characteristics, such as texture or porosity. Probably, electrospinning has the greater relevance, since the obtained nanofiber membranes have a great similarity with the extracellular matrix and, in addition, they can easily incorporate functional and bioactive compounds. Coaxial and emulsion electrospinning processes appear ideal to generate complex systems able to incorporate highly different agents. The present review is mainly focused on the recent works performed with Hap-loaded scaffolds having at least one structural layer composed of core/shell nanofibers.

Hydroxyapatite Biobased Materials for Treatment and Diagnosis of Cancer.

Great advances in cancer treatment have been undertaken in the last years as a consequence of the development of new antitumoral drugs able to target cancer cells with decreasing side effects and a better understanding of the behavior of neoplastic cells during invasion and metastasis. Specifically, drug delivery systems (DDS) based on the use of hydroxyapatite nanoparticles (HAp NPs) are gaining attention and merit a comprehensive review focused on their potential applications. These are derived from the intrinsic properties of HAp (e.g., biocompatibility and biodegradability), together with the easy functionalization and easy control of porosity, crystallinity and morphology of HAp NPs. The capacity to tailor the properties of DLS based on HAp NPs has well-recognized advantages for the control of both drug loading and release. Furthermore, the functionalization of NPs allows a targeted uptake in tumoral cells while their rapid elimination by the reticuloendothelial system (RES) can be avoided. Advances in HAp NPs involve not only their use as drug nanocarriers but also their employment as nanosystems for magnetic hyperthermia therapy, gene delivery systems, adjuvants for cancer immunotherapy and nanoparticles for cell imaging.

Medicated Scaffolds Prepared with Hydroxyapatite/Streptomycin Nanoparticles Encapsulated into Polylactide Microfibers.

The preparation, characterization, and controlled release of hydroxyapatite (HAp) nanoparticles loaded with streptomycin (STR) was studied. These nanoparticles are highly appropriate for the treatment of bacterial infections and are also promising for the treatment of cancer cells. The analyses involved scanning electron microscopy, dynamic light scattering (DLS) and Z-potential measurements, as well as infrared spectroscopy and X-ray diffraction. Both amorphous (ACP) and crystalline (cHAp) hydroxyapatite nanoparticles were considered since they differ in their release behavior (faster and slower for amorphous and crystalline particles, respectively). The encapsulated nanoparticles were finally incorporated into biodegradable and biocompatible polylactide (PLA) scaffolds. The STR load was carried out following different pathways during the synthesis/precipitation of the nanoparticles (i.e., nucleation steps) and also by simple adsorption once the nanoparticles were formed. The loaded nanoparticles were biocompatible according to the study of the cytotoxicity of extracts using different cell lines. FTIR microspectroscopy was also employed to evaluate the cytotoxic effect on cancer cell lines of nanoparticles internalized by endocytosis. The results were promising when amorphous nanoparticles were employed. The nanoparticles loaded with STR increased their size and changed their superficial negative charge to positive. The nanoparticles' crystallinity decreased, with the consequence that their crystal sizes reduced, when STR was incorporated into their structure. STR maintained its antibacterial activity, although it was reduced during the adsorption into the nanoparticles formed. The STR release was faster from the amorphous ACP nanoparticles and slower from the crystalline cHAp nanoparticles. However, in both cases, the STR release was slower when incorporated in calcium and phosphate during the synthesis. The biocompatibility of these nanoparticles was assayed by two approximations. When extracts from the nanoparticles were evaluated in cultures of cell lines, no cytotoxic damage was observed at concentrations of less than 10 mg/mL. This demonstrated their biocompatibility. Another experiment using FTIR microspectroscopy evaluated the cytotoxic effect of nanoparticles internalized by endocytosis in cancer cells. The results demonstrated slight damage to the biomacromolecules when the cells were treated with ACP nanoparticles. Both ACP and cHAp nanoparticles were efficiently encapsulated in PLA electrospun matrices, providing functionality and bioactive properties.

Screening and Assessment of Antimicrobial Susceptibility of Periodontopathic Bacteria in Peruvian Patients with Periodontitis: A Pilot Study.

BACKGROUND: Severe periodontal disease is highly prevalent worldwide, affecting 20% of the population between the ages of 35 and 44 years. The etiological epidemiology in Peru is scarce, even though some studies describe a prevalence of 48.5% of periodontal disease in the general population. Periodontitis is one of the most prevalent oral diseases associated with site-specific changes in the oral microbiota and it has been associated with a socioeconomic state. This study aimed to determine the etiology and resistance profile of bacteria identified in a group of Peruvian patients with periodontal disease. METHODS: Six subgingival plaque samples were collected from eight patients with severe periodontitis. Bacterial identification was carried out by an initial culture, PCR amplification, and subsequently DNA sequencing. We evaluated the antibiotic susceptibility by the disk diffusion method. RESULTS: Variable diversity in oral microbiota was identified in each one of the eight patients. The bacterial genus most frequently found was Streptococcus spp. (15/48, 31.3%) followed by Rothia spp. (11/48, 22.9%), Actinomyces spp. (9/48, 18.8%), and Eikenella spp. (4/48, 8.3%). The most common species found was Rothia dentocariosa (8/48, 16.7%). The antimicrobial susceptibility assay varied according to the species tested; however, among all the isolates evaluated, Actinomyces naeslundii was resistant to penicillin and tetracycline; Eikenella corrodens was resistant to dicloxacillin; and Rothia dentocariosa was resistant to amoxicillin + clavulanic acid and metronidazole but also susceptible to trimethoprim-sulfamethoxazole. CONCLUSIONS: The most prevalent periodontal bacterium found in this study was Rothia dentocariosa. Specific antimicrobial therapy is required to improve the treatment outcomes of patients with periodontal disease and avoid antibiotic resistance.

Molecular etiological profile of atypical bacterial pathogens, viruses and coinfections among infants and children with community acquired pneumonia admitted to a national hospital in Lima, Peru.

OBJECTIVE: The main objective of this study was to detect the presence of 14 respiratory viruses and atypical bacteria (Mycoplasma pneumoniae, Chlamydia pneumoniae), via polymerase chain reaction in patients under 18 years old hospitalized due to community-acquired pneumonia (CAP) from Lima, Peru. RESULTS: Atypical pathogens were detected in 40% (58/146); viral etiologies in 36% (52/146) and coinfections in 19% (27/146). The most common etiological agent was M. pneumoniae (n = 47), followed by C. pneumoniae (n = 11). The most frequent respiratory viruses detected were: respiratory syncytial virus A (n = 35), influenza virus C (n = 21) and parainfluenza virus (n = 10). Viral-bacterial and bacterium-bacterium coinfections were found in 27 cases. In our study population, atypical bacteria (40%) were detected as frequently as respiratory viruses (36%). The presence of M. pneumoniae and C. pneumoniae should not be underestimated as they can be commonly isolated in Peruvian children with CAP.